je viens de changer de computer et de system ubuntu maintenant version 8.10
(changed computer and system ;my webcam don't ok )
mais ma webcam logitech cordless ne fonctionn toujours pas.!
[EMAIL PROTECTED]:~$ dsmeg
[ 0.619468] NetLabel: domain hash size = 128
[ 0.619468] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.619468] NetLabel: unlabeled traffic allowed by default
[ 0.620215] tracer: 772 pages allocated for 65536 entries of 48 bytes
[ 0.620220] actual entries 65620
[ 0.620678] AppArmor: AppArmor Filesystem Enabled
[ 0.620822] system 00:00: iomem range 0xcf000-0xcffff has been reserved
[ 0.620829] system 00:00: iomem range 0xf0000-0xf7fff could not be reserved
[ 0.620834] system 00:00: iomem range 0xf8000-0xfbfff could not be reserved
[ 0.620839] system 00:00: iomem range 0xfc000-0xfffff could not be reserved
[ 0.620844] system 00:00: iomem range 0x19ff0000-0x19ffffff could not be
reserved
[ 0.620851] system 00:00: iomem range 0xffff0000-0xffffffff could not be
reserved
[ 0.620856] system 00:00: iomem range 0x0-0x9ffff could not be reserved
[ 0.620861] system 00:00: iomem range 0x100000-0x19feffff could not be
reserved
[ 0.620866] system 00:00: iomem range 0xfee00000-0xfee00fff has been reserved
[ 0.620884] system 00:02: ioport range 0x4d0-0x4d1 has been reserved
[ 0.656654] pci 0000:00:01.0: PCI bridge, secondary bus 0000:01
[ 0.656660] pci 0000:00:01.0: IO window: disabled
[ 0.656668] pci 0000:00:01.0: MEM window: 0xe4000000-0xe5ffffff
[ 0.656674] pci 0000:00:01.0: PREFETCH window:
0x000000d0000000-0x000000dfffffff
[ 0.656696] pci 0000:00:01.0: setting latency timer to 64
[ 0.656702] bus: 00 index 0 io port: [0, ffff]
[ 0.656706] bus: 00 index 1 mmio: [0, ffffffff]
[ 0.656709] bus: 01 index 0 mmio: [0, 0]
[ 0.656713] bus: 01 index 1 mmio: [e4000000, e5ffffff]
[ 0.656716] bus: 01 index 2 mmio: [d0000000, dfffffff]
[ 0.656720] bus: 01 index 3 mmio: [0, 0]
[ 0.656746] NET: Registered protocol family 2
[ 0.656994] IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.657411] TCP established hash table entries: 16384 (order: 5, 131072
bytes)
[ 0.657786] TCP bind hash table entries: 16384 (order: 5, 131072 bytes)
[ 0.658169] TCP: Hash tables configured (established 16384 bind 16384)
[ 0.658174] TCP reno registered
[ 0.658397] NET: Registered protocol family 1
[ 0.658677] checking if image is initramfs... it is
[ 1.160112] Switched to high resolution mode on CPU 0
[ 1.745248] Freeing initrd memory: 7982k freed
[ 1.746835] audit: initializing netlink socket (disabled)
[ 1.746875] type=2000 audit(1226306339.744:1): initialized
[ 1.755474] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[ 1.760359] VFS: Disk quotas dquot_6.5.1
[ 1.760634] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 1.761428] msgmni has been set to 813
[ 1.761750] io scheduler noop registered
[ 1.761755] io scheduler anticipatory registered
[ 1.761759] io scheduler deadline registered
[ 1.761786] io scheduler cfq registered (default)
[ 1.761818] pci 0000:00:00.0: Applying VIA southbridge workaround
[ 1.761825] PCI: VIA PCI bridge detected.Disabling DAC.
[ 1.761833] pci 0000:00:07.0: Disabling VIA external APIC routing
[ 1.761896] pci 0000:01:00.0: Boot video device
[ 1.762561] isapnp: Scanning for PnP cards...
[ 2.116558] isapnp: No Plug & Play device found
[ 2.198754] Serial: 8250/16550 driver4 ports, IRQ sharing enabled
[ 2.198974] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 2.199286] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[ 2.200626] 00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 2.201386] 00:09: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[ 2.205099] brd: module loaded
[ 2.205257] input: Macintosh mouse button emulation as
/devices/virtual/input/input0
[ 2.205522] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64
irq 1,12
[ 2.206001] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 2.206014] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 2.207135] mice: PS/2 mouse device common for all mice
[ 2.207434] rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
[ 2.207466] rtc0: alarms up to one year, y3k
[ 2.207728] EISA: Probing bus 0 at eisa.0
[ 2.207757] Cannot allocate resource for EISA slot 4
[ 2.207761] Cannot allocate resource for EISA slot 5
[ 2.207765] Cannot allocate resource for EISA slot 6
[ 2.207777] EISA: Detected 0 cards.
[ 2.207784] cpuidle: using governor ladder
[ 2.207788] cpuidle: using governor menu
[ 2.208753] TCP cubic registered
[ 2.208808] Using IPI No-Shortcut mode
[ 2.209329] registered taskstats version 1
[ 2.209538] Magic number: 0:210:624
[ 2.209899] rtc_cmos 00:04: setting system clock to 2008-11-10 08:39:01 UTC
(1226306341)
[ 2.209906] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 2.209910] EDD information not available.
[ 2.210942] Freeing unused kernel memory: 424k freed
[ 2.211038] Write protecting the kernel text: 2576k
[ 2.211098] Write protecting the kernel read-only data: 936k
[ 2.235380] input: AT Translated Set 2 keyboard as
/devices/platform/i8042/serio0/input/input1
[ 2.510414] fuse init (API version 7.9)
[ 2.659201] fan PNP0C0B:00: registered as cooling_device0
[ 2.659216] ACPI: Fan [FAN] (on)
[ 2.673665] ACPI: CPU0 (power states: C1[C1] C2[C2])
[ 2.673777] processor ACPI0007:00: registered as cooling_device1
[ 2.673784] ACPI: Processor [CPU0] (supports 2 throttling states)
[ 2.679122] thermal LNXTHERM:01: registered as thermal_zone0
[ 2.679528] ACPI: Thermal Zone [THRM] (32 C)
[ 3.253166] No dock devices found.
[ 3.400707] SCSI subsystem initialized
[ 3.575656] libata version 3.00 loaded.
[ 3.636446] pata_via 0000:00:07.1: version 0.3.3
[ 3.653388] scsi0 : pata_via
[ 3.653757] scsi1 : pata_via
[ 3.653821] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xd000 irq 14
[ 3.653827] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xd008 irq 15
[ 3.824431] ata1.00: ATAPI: HL-DT-ST DVDRAM GSA-4081B, A104, max UDMA/33
[ 3.824462] ata1.01: ATAPI: ATAPI DVD DD 2X16X4X16, G7V9, max UDMA/33
[ 3.840429] ata1.00: configured for UDMA/33
[ 3.856848] ata1.01: configured for UDMA/33
[ 3.877157] usbcore: registered new interface driver usbfs
[ 3.877209] usbcore: registered new interface driver hub
[ 3.877323] usbcore: registered new device driver usb
[ 3.978912] Linux Tulip driver version 1.1.15 (Feb 27, 2007)
[ 3.986609] USB Universal Host Controller Interface driver v3.0
[ 4.020666] ata2.01: ATA-4: QUANTUM FIREBALL EX3.2A, A0A.0400, max UDMA/33
[ 4.020677] ata2.01: 6306048 sectors, multi 16: LBA
[ 4.037542] ata2.01: configured for UDMA/33
[ 4.045167] scsi 0:0:0:0: CD-ROM HL-DT-ST DVDRAM GSA-4081B A104
PQ: 0 ANSI: 5
[ 4.048192] scsi 0:0:1:0: CD-ROM ATAPI DVD DD 2X16X4X16 G7V9
PQ: 0 ANSI: 5
[ 4.048585] scsi 1:0:1:0: Direct-Access ATA QUANTUM FIREBALL A0A.
PQ: 0 ANSI: 5
[ 4.049461] ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 5
[ 4.049468] PCI: setting IRQ 5 as level-triggered
[ 4.049476] uhci_hcd 0000:00:07.2: PCI INT D -> Link[LNKD] -> GSI 5 (level,
low) -> IRQ 5
[ 4.049495] uhci_hcd 0000:00:07.2: UHCI Host Controller
[ 4.049608] uhci_hcd 0000:00:07.2: new USB bus registered, assigned bus
number 1
[ 4.049647] uhci_hcd 0000:00:07.2: irq 5, io base 0x0000d400
[ 4.050028] usb usb1: configuration #1 chosen from 1 choice
[ 4.050084] hub 1-0:1.0: USB hub found
[ 4.050105] hub 1-0:1.0: 2 ports detected
[ 4.256769] uhci_hcd 0000:00:07.3: PCI INT D -> Link[LNKD] -> GSI 5 (level,
low) -> IRQ 5
[ 4.256797] uhci_hcd 0000:00:07.3: UHCI Host Controller
[ 4.256884] uhci_hcd 0000:00:07.3: new USB bus registered, assigned bus
number 2
[ 4.256920] uhci_hcd 0000:00:07.3: irq 5, io base 0x0000d800
[ 4.257140] usb usb2: configuration #1 chosen from 1 choice
[ 4.257192] hub 2-0:1.0: USB hub found
[ 4.257214] hub 2-0:1.0: 2 ports detected
[ 4.368118] usb 1-1: new full speed USB device using uhci_hcd and address 2
[ 4.465419] ohci1394 0000:00:0b.0: PCI INT A -> Link[LNKD] -> GSI 5 (level,
low) -> IRQ 5
[ 4.516331] ohci1394: fw-host0: OHCI-1394 1.0 (PCI): IRQ=[5]
MMIO=[eb005000-eb0057ff] Max Packet=[2048] IR/IT contexts=[4/8]
[ 4.525422] ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 11
[ 4.525433] PCI: setting IRQ 11 as level-triggered
[ 4.525442] tulip 0000:00:0c.0: PCI INT A -> Link[LNKA] -> GSI 11 (level,
low) -> IRQ 11
[ 4.525825] tulip0: MII transceiver #1 config 1000 status 7849 advertising
05e1.
[ 4.529480] eth0: ADMtek Comet rev 17 at Port 0xe800, 00:50:bf:a0:f3:fc, IRQ
11.
[ 4.604977] usb 1-1: configuration #1 chosen from 1 choice
[ 4.720174] usb 2-1: new full speed USB device using uhci_hcd and address 2
[ 4.881308] usb 2-1: configuration #1 chosen from 1 choice
[ 4.885050] hub 2-1:1.0: USB hub found
[ 4.886972] hub 2-1:1.0: 4 ports detected
[ 5.177925] usb 2-1.1: new full speed USB device using uhci_hcd and address 3
[ 5.302249] usb 2-1.1: configuration #1 chosen from 1 choice
[ 5.370261] scsi 0:0:0:0: Attached scsi generic sg0 type 5
[ 5.370341] scsi 0:0:1:0: Attached scsi generic sg1 type 5
[ 5.370415] scsi 1:0:1:0: Attached scsi generic sg2 type 0
[ 5.381897] usb 2-1.4: new full speed USB device using uhci_hcd and address 4
[ 5.456133] Driver 'sr' needs updating - please use bus_type methods
[ 5.477655] sr0: scsi3-mmc drive: 32x/32x writer dvd-ram cd/rw xa/form2 cdda
tray
[ 5.477667] Uniform CD-ROM driver Revision: 3.20
[ 5.477872] sr 0:0:0:0: Attached scsi CD-ROM sr0
[ 5.485510] sr1: scsi3-mmc drive: 40x/40x writer cd/rw xa/form2 cdda tray
[ 5.485729] sr 0:0:1:0: Attached scsi CD-ROM sr1
[ 5.516709] usb 2-1.4: configuration #1 chosen from 1 choice
[ 5.529786] Driver 'sd' needs updating - please use bus_type methods
[ 5.530057] sd 1:0:1:0: [sda] 6306048 512-byte hardware sectors (3229 MB)
[ 5.530096] sd 1:0:1:0: [sda] Write Protect is off
[ 5.530102] sd 1:0:1:0: [sda] Mode Sense: 00 3a 00 00
[ 5.530156] sd 1:0:1:0: [sda] Write cache: enabled, read cache: enabled,
doesn't support DPO or FUA
[ 5.530322] sd 1:0:1:0: [sda] 6306048 512-byte hardware sectors (3229 MB)
[ 5.530352] sd 1:0:1:0: [sda] Write Protect is off
[ 5.530357] sd 1:0:1:0: [sda] Mode Sense: 00 3a 00 00
[ 5.530408] sd 1:0:1:0: [sda] Write cache: enabled, read cache: enabled,
doesn't support DPO or FUA
[ 5.530419] sda: sda1 sda2 < sda5 >
[ 5.568917] sd 1:0:1:0: [sda] Attached SCSI disk
[ 5.796434] ieee1394: Host added: ID:BUS[0-00:1023] GUID[00308d0100010684]
[ 5.872473] Marking TSC unstable due to TSC halts in idle
[ 8.064793] PM: Starting manual resume from disk
[ 8.064804] PM: Resume from partition 8:5
[ 8.064807] PM: Checking hibernation image.
[ 8.065377] PM: Resume from disk failed.
[ 8.118382] EXT3-fs: INFO: recovery required on readonly filesystem.
[ 8.118393] EXT3-fs: write access will be enabled during recovery.
[ 11.309559] kjournald starting. Commit interval 5 seconds
[ 11.309605] EXT3-fs: sda1: orphan cleanup on readonly fs
[ 11.471600] ext3_orphan_cleanup: deleting unreferenced inode 121598
[ 11.471680] EXT3-fs: sda1: 1 orphan inode deleted
[ 11.471684] EXT3-fs: recovery complete.
[ 11.483117] EXT3-fs: mounted filesystem with ordered data mode.
[ 24.098562] udevd version 124 started
[ 25.337754] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 25.417585] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 25.496481] Linux agpgart interface v0.103
[ 25.588592] parport_pc: VIA 686A/8231 detected
[ 25.588600] parport_pc: probing current configuration
[ 25.588620] parport_pc: Current parallel port base: 0x378
[ 25.588665] parport0: PC-style at 0x378, irq 7 [PCSPP,EPP]
[ 25.621891] agpgart: Detected VIA Twister-K/KT133x/KM133 chipset
[ 25.631944] agpgart-via 0000:00:00.0: AGP aperture is 64M @ 0xe0000000
[ 25.676208] parport_pc: VIA parallel port: io=0x378, irq=7
[ 26.439529] Linux video capture interface: v2.00
[ 26.681905] input: Power Button (FF) as
/devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
[ 26.696113] ACPI: Power Button (FF) [PWRF]
[ 26.696447] input: Power Button (CM) as
/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input3
[ 26.708102] ACPI: Power Button (CM) [PWRB]
[ 27.297896] cx88/2: cx2388x MPEG-TS Driver Manager version 0.0.6 loaded
[ 27.298783] cx88[0]: subsystem: 0070:1402, board: Hauppauge WinTV-HVR3000
TriMode Analog/DVB-S/DVB-T [card=53,autodetected]
[ 27.298790] cx88[0]: TV tuner type 63, Radio tuner type -1
[ 27.548594] cx88/0: cx2388x v4l2 driver version 0.0.6 loaded
[ 28.101043] cx2388x alsa driver version 0.0.6 loaded
[ 28.136502] tveeprom 1-0050: Hauppauge model 14109, rev B3D3, serial# 2910677
[ 28.136509] tveeprom 1-0050: MAC address is 00-0D-FE-2C-69-D5
[ 28.136514] tveeprom 1-0050: tuner model is Philips FMD1216MEX (idx 133,
type 63)
[ 28.136520] tveeprom 1-0050: TV standards PAL(B/G) PAL(I) SECAM(L/L')
PAL(D/D1/K) ATSC/DVB Digital (eeprom 0xf4)
[ 28.136526] tveeprom 1-0050: audio processor is CX882 (idx 33)
[ 28.136530] tveeprom 1-0050: decoder processor is CX882 (idx 25)
[ 28.136534] tveeprom 1-0050: has radio, has IR receiver, has no IR
transmitter
[ 28.136540] cx88[0]: hauppauge eeprom: model=14109
[ 28.239920] input: cx88 IR (Hauppauge WinTV-HVR300 as
/devices/pci0000:00/0000:00:0a.2/input/input4
[ 28.248458] cx88[0]/2: cx2388x 8802 Driver Manager
[ 28.249231] ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 10
[ 28.249238] PCI: setting IRQ 10 as level-triggered
[ 28.249249] cx88-mpeg driver manager 0000:00:0a.2: PCI INT A -> Link[LNKC]
-> GSI 10 (level, low) -> IRQ 10
[ 28.249262] cx88[0]/2: found at 0000:00:0a.2, rev: 5, irq: 10, latency: 32,
mmio: 0xe8000000
[ 28.249833] cx8800 0000:00:0a.0: PCI INT A -> Link[LNKC] -> GSI 10 (level,
low) -> IRQ 10
[ 28.249845] cx88[0]/0: found at 0000:00:0a.0, rev: 5, irq: 10, latency: 32,
mmio: 0xe6000000
[ 28.250102] cx88[0]/0: registered device video0 [v4l2]
[ 28.250160] cx88[0]/0: registered device vbi0
[ 28.250218] cx88[0]/0: registered device radio0
[ 28.257846] cx88_audio 0000:00:0a.1: PCI INT A -> Link[LNKC] -> GSI 10
(level, low) -> IRQ 10
[ 28.257919] cx88[0]/1: CX88x/0: ALSA support for cx2388x boards
[ 28.724169] cx88/2: cx2388x dvb driver version 0.0.6 loaded
[ 28.724178] cx88/2: registering cx8802 driver, type: dvb access: shared
[ 28.724186] cx88[0]/2: subsystem: 0070:1402, board: Hauppauge WinTV-HVR3000
TriMode Analog/DVB-S/DVB-T [card=53]
[ 28.724193] cx88[0]/2: cx2388x based DVB/ATSC card
[ 28.880937] input: PC Speaker as /devices/platform/pcspkr/input/input5
[ 29.707987] tuner-simple 1-0061: creating new instance
[ 29.707998] tuner-simple 1-0061: type set to 63 (Philips FMD1216ME MK3
Hybrid Tuner)
[ 29.710151] DVB: registering new adapter (cx88[0])
[ 29.710159] DVB: registering frontend 0 (Conexant CX22702 DVB-T)...
[ 29.779233] Bluetooth: Core ver 2.13
[ 29.783226] NET: Registered protocol family 31
[ 29.783233] Bluetooth: HCI device and connection manager initialized
[ 29.783241] Bluetooth: HCI socket layer initialized
[ 30.001998] input: PS/2 Generic Mouse as
/devices/platform/i8042/serio1/input/input6
[ 30.138827] Bluetooth: Generic Bluetooth USB driver ver 0.3
[ 30.139075] usbcore: registered new interface driver btusb
[ 30.404393] VIA 82xx Audio 0000:00:07.5: PCI INT C -> Link[LNKC] -> GSI 10
(level, low) -> IRQ 10
[ 30.404541] VIA 82xx Audio 0000:00:07.5: setting latency timer to 64
[ 30.537899] usb 2-1.1: reset full speed USB device using uhci_hcd and
address 3
[ 30.654273] phy0: Selected rate control algorithm 'pid'
[ 30.895715] zd1211rw 2-1.1:1.0: phy0
[ 30.895763] usbcore: registered new interface driver zd1211rw
[ 35.573903] lp0: using parport0 (interrupt-driven).
[ 35.895155] Adding 192740k swap on /dev/sda5. Priority:-1 extents:1
across:192740k
[ 36.515341] EXT3 FS on sda1, internal journal
[ 37.996324] type=1505 audit(1226306377.092:2): operation="profile_load"
name="/usr/share/gdm/guest-session/Xsession" name2="default" pid=4234
[ 38.369130] type=1505 audit(1226306377.464:3): operation="profile_load"
name="/usr/lib/cups/backend/cups-pdf" name2="default" pid=4239
[ 38.369818] type=1505 audit(1226306377.464:4): operation="profile_load"
name="/usr/sbin/cupsd" name2="default" pid=4239
[ 38.569744] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 39.482284] ACPI: WMI: Mapper loaded
[ 41.351589] warning: `avahi-daemon' uses 32-bit capabilities (legacy support
in use)
[ 41.463270] apm: BIOS version 1.2 Flags 0x07 (Driver version 1.16ac)
[ 41.463287] apm: overridden by ACPI.
[ 42.033773] ppdev: user-space parallel port driver
[ 43.635827] cx22702_readreg: readreg error (ret == -6)
[ 43.637957] cx22702_writereg: writereg error (reg == 0x0d, val == 0x00, ret
== -6)
[ 43.640308] cx22702_readreg: readreg error (ret == -6)
[ 43.642137] cx22702_writereg: writereg error (reg == 0x0d, val == 0x01, ret
== -6)
[ 43.646460] cx22702_readreg: readreg error (ret == -6)
[ 43.648564] cx22702_writereg: writereg error (reg == 0x0d, val == 0x00, ret
== -6)
[ 43.650871] cx22702_readreg: readreg error (ret == -6)
[ 43.652720] cx22702_writereg: writereg error (reg == 0x0d, val == 0x01, ret
== -6)
[ 43.669933] cx22702_readreg: readreg error (ret == -6)
[ 43.672002] cx22702_writereg: writereg error (reg == 0x0d, val == 0x00, ret
== -6)
[ 43.674402] cx22702_readreg: readreg error (ret == -6)
[ 43.676243] cx22702_writereg: writereg error (reg == 0x0d, val == 0x01, ret
== -6)
[ 43.693599] cx22702_readreg: readreg error (ret == -6)
[ 43.695675] cx22702_writereg: writereg error (reg == 0x0d, val == 0x00, ret
== -6)
[ 43.698050] cx22702_readreg: readreg error (ret == -6)
[ 43.699867] cx22702_writereg: writereg error (reg == 0x0d, val == 0x01, ret
== -6)
[ 44.459242] Bluetooth: L2CAP ver 2.11
[ 44.459255] Bluetooth: L2CAP socket layer initialized
[ 44.513539] Bluetooth: RFCOMM socket layer initialized
[ 44.514117] Bluetooth: RFCOMM TTY layer initialized
[ 44.514129] Bluetooth: RFCOMM ver 1.10
[ 44.530448] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 44.530463] Bluetooth: BNEP filters: protocol multicast
[ 44.623132] Bridge firewalling registered
[ 44.626353] pan0: Dropping NETIF_F_UFO since no NETIF_F_HW_CSUM feature.
[ 44.656509] Bluetooth: SCO (Voice Link) ver 0.6
[ 44.656523] Bluetooth: SCO socket layer initialized
[ 48.850306] firmware: requesting zd1211/zd1211_ub
[ 49.069765] firmware: requesting zd1211/zd1211_uphr
[ 49.278551] zd1211rw 2-1.1:1.0: firmware version 4605
[ 49.338625] zd1211rw 2-1.1:1.0: zd1211 chip 0ace:1211 v4330 full 00-11-f6
RF2959_RF pa0 -----
[ 49.600513] NET: Registered protocol family 17
[ 50.487365] wlan0: authenticate with AP 00:17:33:c0:7c:88
[ 50.490399] wlan0: authenticated
[ 50.490416] wlan0: associate with AP 00:17:33:c0:7c:88
[ 50.493398] wlan0: RX AssocResp from 00:17:33:c0:7c:88 (capab=0x401 status=0
aid=1)
[ 50.493410] wlan0: associated
[ 50.506259] wlan0: disassociating by local choice (reason=3)
[ 51.893597] cx88[0]: irq aud [0x1001] dn_risci1* dn_sync*
[ 51.893623] cx88[0]: irq aud [0x1001] dn_risci1* dn_sync*
[ 51.893632] cx88[0]: irq aud [0x1001] dn_risci1* dn_sync*
[ 51.893642] cx88[0]: irq aud [0x1001] dn_risci1* dn_sync*
[ 51.893651] cx88[0]: irq aud [0x1001] dn_risci1* dn_sync*
[ 51.893659] cx88[0]: irq aud [0x1001] dn_risci1* dn_sync*
[ 51.893668] cx88[0]: irq aud [0x1001] dn_risci1* dn_sync*
[ 51.893676] cx88[0]: irq aud [0x1001] dn_risci1* dn_sync*
[ 51.893685] cx88[0]: irq aud [0x1001] dn_risci1* dn_sync*
[ 51.893697] cx88[0]: irq aud [0x1001] dn_risci1* dn_sync*
[ 51.893705] cx88[0]: irq aud [0x1001] dn_risci1* dn_sync*
[ 51.893713] cx88[0]: irq aud [0x1001] dn_risci1* dn_sync*
[ 51.893722] cx88[0]: irq aud [0x1001] dn_risci1* dn_sync*
[ 51.893731] cx88[0]: irq aud [0x1001] dn_risci1* dn_sync*
[ 51.893739] cx88[0]: irq aud [0x1001] dn_risci1* dn_sync*
[ 51.893748] cx88[0]: irq aud [0x1001] dn_risci1* dn_sync*
[ 51.893759] cx88[0]: irq aud [0x1001] dn_risci1* dn_sync*
[ 51.893769] cx88[0]: irq aud [0x1001] dn_risci1* dn_sync*
[ 51.893778] cx88[0]: irq aud [0x1001] dn_risci1* dn_sync*
[ 51.893787] cx88[0]: irq aud [0x1001] dn_risci1* dn_sync*
[ 51.893795] cx88[0]: irq aud [0x1001] dn_risci1* dn_sync*
[ 51.893804] cx88[0]: irq aud [0x1001] dn_risci1* dn_sync*
[ 51.893813] cx88[0]: irq aud [0x1001] dn_risci1* dn_sync*
[ 51.893821] cx88[0]: irq aud [0x1001] dn_risci1* dn_sync*
[ 51.893830] cx88[0]: irq aud [0x1001] dn_risci1* dn_sync*
[ 51.893838] cx88[0]: irq aud [0x1001] dn_risci1* dn_sync*
[ 51.893847] cx88[0]: irq aud [0x1001] dn_risci1* dn_sync*
[ 51.893856] cx88[0]: irq aud [0x1001] dn_risci1* dn_sync*
[ 51.893865] cx88[0]: irq aud [0x1001] dn_risci1* dn_sync*
[ 51.893874] cx88[0]: irq aud [0x1001] dn_risci1* dn_sync*
[ 51.898862] cx88[0]: irq aud [0x1001] dn_risci1* dn_sync*
[ 51.898875] cx88[0]: irq aud [0x1001] dn_risci1* dn_sync*
[ 51.898885] cx88[0]: irq aud [0x1001] dn_risci1* dn_sync*
[ 51.898895] cx88[0]: irq aud [0x1001] dn_risci1* dn_sync*
[ 51.898903] cx88[0]: irq aud [0x1001] dn_risci1* dn_sync*
[ 51.898912] cx88[0]: irq aud [0x1001] dn_risci1* dn_sync*
[ 51.898921] cx88[0]: irq aud [0x1001] dn_risci1* dn_sync*
[ 51.898931] cx88[0]: irq aud [0x1001] dn_risci1* dn_sync*
[ 51.898939] cx88[0]: irq aud [0x1001] dn_risci1* dn_sync*
[ 51.898947] cx88[0]: irq aud [0x1001] dn_risci1* dn_sync*
[ 51.898957] cx88[0]: irq aud [0x1001] dn_risci1* dn_sync*
[ 51.898965] cx88[0]: irq aud [0x1001] dn_risci1* dn_sync*
[ 51.898974] cx88[0]: irq aud [0x1001] dn_risci1* dn_sync*
[ 51.898982] cx88[0]: irq aud [0x1001] dn_risci1* dn_sync*
[ 51.898991] cx88[0]: irq aud [0x1001] dn_risci1* dn_sync*
[ 51.898999] cx88[0]: irq aud [0x1001] dn_risci1* dn_sync*
[ 51.899007] cx88[0]: irq aud [0x1001] dn_risci1* dn_sync*
[ 51.899015] cx88[0]: irq aud [0x1001] dn_risci1* dn_sync*
[ 51.899023] cx88[0]: irq aud [0x1001] dn_risci1* dn_sync*
[ 51.899031] cx88[0]: irq aud [0x1001] dn_risci1* dn_sync*
[ 51.899039] cx88[0]: irq aud [0x1001] dn_risci1* dn_sync*
[ 51.899047] cx88[0]: irq aud [0x1001] dn_risci1* dn_sync*
[ 51.899058] cx88[0]: irq aud [0x1001] dn_risci1* dn_sync*
[ 51.899068] cx88[0]: irq aud [0x1001] dn_risci1* dn_sync*
[ 51.899075] cx88[0]: irq aud [0x1001] dn_risci1* dn_sync*
[ 51.899083] cx88[0]: irq aud [0x1001] dn_risci1* dn_sync*
[ 51.899092] cx88[0]: irq aud [0x1001] dn_risci1* dn_sync*
[ 51.899100] cx88[0]: irq aud [0x1001] dn_risci1* dn_sync*
[ 51.899109] cx88[0]: irq aud [0x1001] dn_risci1* dn_sync*
[ 51.899118] cx88[0]: irq aud [0x1001] dn_risci1* dn_sync*
[ 51.899127] cx88[0]: irq aud [0x1001] dn_risci1* dn_sync*
[ 51.899136] cx88[0]: irq aud [0x1001] dn_risci1* dn_sync*
[ 51.899144] cx88[0]: irq aud [0x1001] dn_risci1* dn_sync*
[ 51.899153] cx88[0]: irq aud [0x1001] dn_risci1* dn_sync*
[ 51.899162] cx88[0]: irq aud [0x1001] dn_risci1* dn_sync*
[ 51.899170] cx88[0]: irq aud [0x1001] dn_risci1* dn_sync*
[ 51.899179] cx88[0]: irq aud [0x1001] dn_risci1* dn_sync*
[ 51.899187] cx88[0]: irq aud [0x1001] dn_risci1* dn_sync*
[ 51.899196] cx88[0]: irq aud [0x1001] dn_risci1* dn_sync*
[ 51.899205] cx88[0]: irq aud [0x1001] dn_risci1* dn_sync*
[ 51.899213] cx88[0]: irq aud [0x1001] dn_risci1* dn_sync*
[ 51.899222] cx88[0]: irq aud [0x1001] dn_risci1* dn_sync*
[ 51.899231] cx88[0]: irq aud [0x1001] dn_risci1* dn_sync*
[ 51.899240] cx88[0]: irq aud [0x1001] dn_risci1* dn_sync*
[ 51.899249] cx88[0]: irq aud [0x1001] dn_risci1* dn_sync*
[ 51.899257] cx88[0]: irq aud [0x1001] dn_risci1* dn_sync*
[ 51.899266] cx88[0]: irq aud [0x1001] dn_risci1* dn_sync*
[ 51.899275] cx88[0]: irq aud [0x1001] dn_risci1* dn_sync*
[ 51.899283] cx88[0]: irq aud [0x1001] dn_risci1* dn_sync*
[ 51.899292] cx88[0]: irq aud [0x1001] dn_risci1* dn_sync*
[ 51.899298] cx88[0]/1: IRQ loop detected, disabling interrupts
[ 51.903599] cx88[0]: irq aud [0x1001] dn_risci1* dn_sync*
[ 69.057086] UDF-fs: No VRS found
[ 69.120173] ISO 9660 Extensions: Microsoft Joliet Level 3
[ 69.234902] ISO 9660 Extensions: RRIP_1991A
[ 96.028583] ppdev0: registered pardevice
[ 96.076692] ppdev0: unregistered pardevice
[ 98.120957] ppdev0: registered pardevice
[ 98.168366] ppdev0: unregistered pardevice
[ 98.471958] type=1503 audit(1226306437.564:5): operation="inode_permission"
requested_mask="r::" denied_mask="r::" fsuid=7 name="/proc/5743/net/" pid=5743
profile="/usr/sbin/cupsd"
[ 98.587140] NET: Registered protocol family 10
[ 98.591199] lo: Disabled Privacy Extensions
[ 98.593751] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 98.595953] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 98.598586] type=1503 audit(1226306437.692:6): operation="socket_create"
family="ax25" sock_type="dgram" protocol=0 pid=5743 profile="/usr/sbin/cupsd"
[ 98.598608] type=1503 audit(1226306437.692:7): operation="socket_create"
family="netrom" sock_type="seqpacket" protocol=0 pid=5743
profile="/usr/sbin/cupsd"
[ 98.598620] type=1503 audit(1226306437.692:8): operation="socket_create"
family="rose" sock_type="dgram" protocol=0 pid=5743 profile="/usr/sbin/cupsd"
[ 98.598631] type=1503 audit(1226306437.692:9): operation="socket_create"
family="ipx" sock_type="dgram" protocol=0 pid=5743 profile="/usr/sbin/cupsd"
[ 98.598642] type=1503 audit(1226306437.692:10): operation="socket_create"
family="appletalk" sock_type="dgram" protocol=0 pid=5743
profile="/usr/sbin/cupsd"
[ 98.598653] type=1503 audit(1226306437.692:11): operation="socket_create"
family="econet" sock_type="dgram" protocol=0 pid=5743 profile="/usr/sbin/cupsd"
[ 98.598664] type=1503 audit(1226306437.692:12): operation="socket_create"
family="ash" sock_type="dgram" protocol=0 pid=5743 profile="/usr/sbin/cupsd"
[ 98.598674] type=1503 audit(1226306437.692:13): operation="socket_create"
family="x25" sock_type="seqpacket" protocol=0 pid=5743 profile="/usr/sbin/cupsd"
[ 98.598849] type=1503 audit(1226306437.692:14): operation="inode_permission"
requested_mask="::r" denied_mask="::r" fsuid=7 name="/proc/5743/net/dev"
pid=5743 profile="/usr/sbin/cupsd"
[ 98.629351] ppdev0: registered pardevice
[ 98.680083] ppdev0: unregistered pardevice
[ 614.456057] usb 2-2: new full speed USB device using uhci_hcd and address 5
[ 614.636240] usb 2-2: configuration #1 chosen from 1 choice
[ 614.852750] usbcore: registered new interface driver libusual
[ 614.890938] Initializing USB Mass Storage driver...
[ 614.894250] scsi2 : SCSI emulation for USB Mass Storage devices
[ 614.896130] usbcore: registered new interface driver usb-storage
[ 614.896838] USB Mass Storage support registered.
[ 614.897615] usb-storage: device found at 5
[ 614.897624] usb-storage: waiting for device to settle before scanning
[ 619.896526] usb-storage: device scan complete
[ 619.900507] scsi 2:0:0:0: Direct-Access USB DISK Pro 1100
PQ: 0 ANSI: 0 CCS
[ 619.942511] sd 2:0:0:0: [sdb] 3963904 512-byte hardware sectors (2030 MB)
[ 619.948591] sd 2:0:0:0: [sdb] Write Protect is off
[ 619.948610] sd 2:0:0:0: [sdb] Mode Sense: 43 00 00 00
[ 619.948616] sd 2:0:0:0: [sdb] Assuming drive cache: write through
[ 619.964503] sd 2:0:0:0: [sdb] 3963904 512-byte hardware sectors (2030 MB)
[ 619.968482] sd 2:0:0:0: [sdb] Write Protect is off
[ 619.968501] sd 2:0:0:0: [sdb] Mode Sense: 43 00 00 00
[ 619.968507] sd 2:0:0:0: [sdb] Assuming drive cache: write through
[ 619.969513] sdb: sdb1
[ 620.085319] sd 2:0:0:0: [sdb] Attached SCSI removable disk
[ 620.087429] sd 2:0:0:0: Attached scsi generic sg3 type 0
[ 1100.288058] usb 1-2: new full speed USB device using uhci_hcd and address 3
[ 1100.457392] usb 1-2: configuration #1 chosen from 1 choice
[ 1100.480234] scsi3 : SCSI emulation for USB Mass Storage devices
[ 1100.487459] usb-storage: device found at 3
[ 1100.487480] usb-storage: waiting for device to settle before scanning
[ 1105.485302] usb-storage: device scan complete
[ 1105.489252] scsi 3:0:0:0: Direct-Access JetFlash TS1GJFV30 8.07
PQ: 0 ANSI: 2
[ 1105.543295] sd 3:0:0:0: [sdc] 2002944 512-byte hardware sectors (1026 MB)
[ 1105.549215] sd 3:0:0:0: [sdc] Write Protect is off
[ 1105.549235] sd 3:0:0:0: [sdc] Mode Sense: 03 00 00 00
[ 1105.549241] sd 3:0:0:0: [sdc] Assuming drive cache: write through
[ 1105.562236] sd 3:0:0:0: [sdc] 2002944 512-byte hardware sectors (1026 MB)
[ 1105.565446] sd 3:0:0:0: [sdc] Write Protect is off
[ 1105.565466] sd 3:0:0:0: [sdc] Mode Sense: 03 00 00 00
[ 1105.565471] sd 3:0:0:0: [sdc] Assuming drive cache: write through
[ 1105.566473] sdc: sdc1
[ 1106.537936] sd 3:0:0:0: [sdc] Attached SCSI removable disk
[ 1106.538662] sd 3:0:0:0: Attached scsi generic sg4 type 0
[EMAIL PROTECTED]:~$
[EMAIL PROTECTED]:~$ uname -a
Linux vincent-desktop 2.6.27-7-generic #1 SMP Wed Oct 22 00:29:18 UTC 2008 i686
GNU/Linux
[EMAIL PROTECTED]:~$ cat /proc/version_signature
Ubuntu 2.6.27-7.13-generic
[EMAIL PROTECTED]:~$ sudo lspci -vvnn
00:00.0 Host bridge [0600]: VIA Technologies, Inc. VT8363/8365 [KT133/KM133]
[1106:0305] (rev 03)
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort+ >SERR- <PERR- INTx-
Latency: 8
Region 0: Memory at e0000000 (32-bit, prefetchable) [size=64M]
Capabilities: [a0] AGP version 2.0
Status: RQ=32 Iso- ArqSz=0 Cal=0 SBA+ ITACoh- GART64- HTrans-
64bit- FW- AGP3- Rate=x1,x2,x4
Command: RQ=1 ArqSz=0 Cal=0 SBA- AGP- GART64- 64bit- FW-
Rate=<none>
Capabilities: [c0] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Kernel driver in use: agpgart-via
Kernel modules: via-agp
00:01.0 PCI bridge [0604]: VIA Technologies, Inc. VT8363/8365 [KT133/KM133 AGP]
[1106:8305]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort+ >SERR- <PERR- INTx-
Latency: 0
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
Memory behind bridge: e4000000-e5ffffff
Prefetchable memory behind bridge: d0000000-dfffffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA+ VGA+ MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: [80] Power Management version 2
Flags: PMEClk- DSI- D1+ D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Kernel modules: shpchp
00:07.0 ISA bridge [0601]: VIA Technologies, Inc. VT82C686 [Apollo Super South]
[1106:0686] (rev 40)
Subsystem: VIA Technologies, Inc. Device [1106:0000]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping+ SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Capabilities: [c0] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Kernel driver in use: parport_pc
Kernel modules: parport_pc
00:07.1 IDE interface [0101]: VIA Technologies, Inc.
VT82C586A/B/VT82C686/A/B/VT823x/A/C PIPC Bus Master IDE [1106:0571] (rev 06)
(prog-if 8a [Master SecP PriP])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32
Region 0: [virtual] Memory at 000001f0 (32-bit, non-prefetchable)
[size=8]
Region 1: [virtual] Memory at 000003f0 (type 3, non-prefetchable)
[size=1]
Region 2: [virtual] Memory at 00000170 (32-bit, non-prefetchable)
[size=8]
Region 3: [virtual] Memory at 00000370 (type 3, non-prefetchable)
[size=1]
Region 4: I/O ports at d000 [size=16]
Capabilities: [c0] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Kernel driver in use: pata_via
Kernel modules: pata_via
00:07.2 USB Controller [0c03]: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1
Controller [1106:3038] (rev 1a)
Subsystem: First International Computer, Inc. Device [0925:1234]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32, Cache Line Size: 32 bytes
Interrupt: pin D routed to IRQ 5
Region 4: I/O ports at d400 [size=32]
Capabilities: [80] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Kernel driver in use: uhci_hcd
Kernel modules: uhci-hcd
00:07.3 USB Controller [0c03]: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1
Controller [1106:3038] (rev 1a)
Subsystem: First International Computer, Inc. Device [0925:1234]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32, Cache Line Size: 32 bytes
Interrupt: pin D routed to IRQ 5
Region 4: I/O ports at d800 [size=32]
Capabilities: [80] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Kernel driver in use: uhci_hcd
Kernel modules: uhci-hcd
00:07.4 Bridge [0680]: VIA Technologies, Inc. VT82C686 [Apollo Super ACPI]
[1106:3057] (rev 40)
Subsystem: VIA Technologies, Inc. VT82C686 [Apollo Super ACPI]
[1106:3057]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin ? routed to IRQ 9
Capabilities: [68] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Kernel modules: via686a, i2c-viapro
00:07.5 Multimedia audio controller [0401]: VIA Technologies, Inc. VT82C686
AC97 Audio Controller [1106:3058] (rev 50)
Subsystem: VIA Technologies, Inc. Device [1106:4511]
Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin C routed to IRQ 10
Region 0: I/O ports at dc00 [size=256]
Region 1: I/O ports at e000 [size=4]
Region 2: I/O ports at e400 [size=4]
Capabilities: [c0] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Kernel driver in use: VIA 82xx Audio
Kernel modules: snd-via82xx
00:0a.0 Multimedia video controller [0400]: Conexant Systems, Inc.
CX23880/1/2/3 PCI Video and Audio Decoder [14f1:8800] (rev 05)
Subsystem: Hauppauge computer works Inc. Device [0070:1402]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32 (5000ns min, 13750ns max), Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 10
Region 0: Memory at e6000000 (32-bit, non-prefetchable) [size=16M]
Capabilities: [44] Vital Product Data <?>
Capabilities: [4c] Power Management version 2
Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Kernel driver in use: cx8800
Kernel modules: cx8800
00:0a.1 Multimedia controller [0480]: Conexant Systems, Inc. CX23880/1/2/3 PCI
Video and Audio Decoder [Audio Port] [14f1:8811] (rev 05)
Subsystem: Hauppauge computer works Inc. Device [0070:1402]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32 (1000ns min, 63750ns max), Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 10
Region 0: Memory at e7000000 (32-bit, non-prefetchable) [size=16M]
Capabilities: [4c] Power Management version 2
Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Kernel driver in use: cx88_audio
Kernel modules: cx88-alsa
00:0a.2 Multimedia controller [0480]: Conexant Systems, Inc. CX23880/1/2/3 PCI
Video and Audio Decoder [MPEG Port] [14f1:8802] (rev 05)
Subsystem: Hauppauge computer works Inc. Device [0070:1402]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32 (1500ns min, 22000ns max), Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 10
Region 0: Memory at e8000000 (32-bit, non-prefetchable) [size=16M]
Capabilities: [4c] Power Management version 2
Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Kernel driver in use: cx88-mpeg driver manager
Kernel modules: cx8802
00:0a.4 Multimedia controller [0480]: Conexant Systems, Inc. CX23880/1/2/3 PCI
Video and Audio Decoder [IR Port] [14f1:8804] (rev 05)
Subsystem: Hauppauge computer works Inc. Device [0070:1402]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32 (1500ns min, 63750ns max), Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 10
Region 0: Memory at e9000000 (32-bit, non-prefetchable) [size=16M]
Capabilities: [4c] Power Management version 2
Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:0b.0 FireWire (IEEE 1394) [0c00]: Texas Instruments TSB12LV23 IEEE-1394
Controller [104c:8019] (prog-if 10)
Subsystem: Pinnacle Systems Inc. Device [11bd:000e]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32 (750ns min, 1000ns max), Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 5
Region 0: Memory at eb005000 (32-bit, non-prefetchable) [size=2K]
Region 1: Memory at eb000000 (32-bit, non-prefetchable) [size=16K]
Capabilities: [44] Power Management version 1
Flags: PMEClk- DSI- D1- D2+ AuxCurrent=0mA
PME(D0-,D1-,D2+,D3hot+,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Kernel driver in use: ohci1394
Kernel modules: ohci1394
00:0c.0 Ethernet controller [0200]: ADMtek NC100 Network Everywhere Fast
Ethernet 10/100 [1317:0985] (rev 11)
Subsystem: SiteCom Europe BV Device [182d:0020]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32 (63750ns min, 63750ns max), Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 11
Region 0: I/O ports at e800 [size=256]
Region 1: Memory at eb004000 (32-bit, non-prefetchable) [size=1K]
[virtual] Expansion ROM at 20000000 [disabled] [size=128K]
Capabilities: [c0] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=100mA
PME(D0+,D1+,D2+,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Kernel driver in use: tulip
Kernel modules: tulip
01:00.0 VGA compatible controller [0300]: nVidia Corporation NV25 [GeForce4 Ti
4200] [10de:0253] (rev a2)
Subsystem: ASUSTeK Computer Inc. Device [1043:8043]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32 (1250ns min, 250ns max)
Interrupt: pin A routed to IRQ 11
Region 0: Memory at e4000000 (32-bit, non-prefetchable) [size=16M]
Region 1: Memory at d0000000 (32-bit, prefetchable) [size=128M]
Region 2: Memory at d8000000 (32-bit, prefetchable) [size=512K]
[virtual] Expansion ROM at d8080000 [disabled] [size=128K]
Capabilities: [60] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [44] AGP version 2.0
Status: RQ=32 Iso- ArqSz=0 Cal=0 SBA+ ITACoh- GART64- HTrans-
64bit- FW+ AGP3- Rate=x1,x2,x4
Command: RQ=1 ArqSz=0 Cal=0 SBA- AGP- GART64- 64bit- FW-
Rate=<none>
Kernel modules: nvidiafb, rivafb
[EMAIL PROTECTED]:~$ lsusb
Bus 002 Device 005: ID 090c:1000 Feiya Technology Corp. Memory Bar
Bus 002 Device 004: ID 0c10:0000
Bus 002 Device 003: ID 0ace:1211 ZyDAS 802.11b/g USB2 WiFi
Bus 002 Device 002: ID 05e3:0605 Genesys Logic, Inc. USB 2.0 Hub [ednet]
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 003: ID 058f:6387 Alcor Micro Corp. Transcend JetFlash Flash
Drive
Bus 001 Device 002: ID 046d:0910 Logitech, Inc. QuickCam Cordless
Bus 001 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
[EMAIL PROTECTED]:~$ sudo lsusb -d046:09.10v
[EMAIL PROTECTED]:~$
--
Logitech Quickcam Cordless (wireless) (046d:0910) detected but doesn't work
https://bugs.launchpad.net/bugs/294704
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
--
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
