I get the same thing on my computer. Sorry, no sensors were detected. Either your sensors are not supported, or they are connected to an I2C or SMBus adapter that is not supported
If you find a solution to this let me know and I will do the same. I have posted the problem in the ubuntu forums, no ideas on how to fix it yet. On Tue, Nov 11, 2008 at 11:15 AM, albert <[EMAIL PROTECTED]> wrote: > same here. running Hardy on an older Compaq Armada M300. Results of > sensors-detect: > > # sensors-detect revision 5016 (2007-11-11 22:20:16 +0100) > > This program will help you determine which kernel modules you need > to load to use lm_sensors most effectively. It is generally safe > and recommended to accept the default answers to all questions, > unless you know what you're doing. > > We can start with probing for (PCI) I2C or SMBus adapters. > Do you want to probe now? (YES/no): y > Probing for PCI bus adapters... > Use driver `i2c-piix4' for device 0000:00:07.3: Intel 82371AB PIIX4 ACPI > > We will now try to load each adapter module in turn. > Module `i2c-piix4' already loaded. > If you have undetectable or unsupported adapters, you can have them > scanned by manually loading the modules before running this script. > > To continue, we need module `i2c-dev' to be loaded. > Do you want to load `i2c-dev' now? (YES/no): y > Module loaded successfully. > > We are now going to do the I2C/SMBus adapter probings. Some chips may > be double detected; we choose the one with the highest confidence > value in that case. > If you found that the adapter hung after probing a certain address, > you can specify that address to remain unprobed. > > Next adapter: SMBus PIIX4 adapter at 4000 (i2c-0) > Do you want to scan it? (YES/no/selectively): y > Client found at address 0x50 > Probing for `Analog Devices ADM1033'... No > Probing for `Analog Devices ADM1034'... No > Probing for `SPD EEPROM'... Yes > (confidence 8, not a hardware monitoring chip) > Probing for `EDID EEPROM'... No > > Some chips are also accessible through the ISA I/O ports. We have to > write to arbitrary I/O ports to probe them. This is usually safe though. > Yes, you do have ISA I/O ports even if you do not have any ISA slots! > Do you want to scan the ISA I/O ports? (YES/no): y > Probing for `National Semiconductor LM78' at 0x290... No > Probing for `National Semiconductor LM78-J' at 0x290... No > Probing for `National Semiconductor LM79' at 0x290... No > Probing for `Winbond W83781D' at 0x290... No > Probing for `Winbond W83782D' at 0x290... No > Probing for `Silicon Integrated Systems SIS5595'... No > Probing for `VIA VT82C686 Integrated Sensors'... No > Probing for `VIA VT8231 Integrated Sensors'... No > Probing for `IPMI BMC KCS' at 0xca0... No > Probing for `IPMI BMC SMIC' at 0xca8... No > > Some Super I/O chips may also contain sensors. We have to write to > standard I/O ports to probe them. This is usually safe. > Do you want to scan for Super I/O sensors? (YES/no): y > Probing for Super-I/O at 0x2e/0x2f > Trying family `National Semiconductor'... No > Trying family `SMSC'... No > Trying family `VIA/Winbond/Fintek'... No > Trying family `ITE'... No > Probing for Super-I/O at 0x4e/0x4f > Trying family `National Semiconductor'... No > Trying family `SMSC'... No > Trying family `VIA/Winbond/Fintek'... No > Trying family `ITE'... No > > Some CPUs or memory controllers may also contain embedded sensors. > Do you want to scan for them? (YES/no): y > AMD K8 thermal sensors... No > AMD K10 thermal sensors... No > Intel Core family thermal sensor... No > Intel AMB FB-DIMM thermal sensor... No > > Sorry, no sensors were detected. > Either your sensors are not supported, or they are connected to an > I2C or SMBus adapter that is not supported. See doc/FAQ, > doc/lm_sensors-FAQ.html or http://www.lm-sensors.org/wiki/FAQ > (FAQ #4.24.3) for further information. > If you find out what chips are on your board, check > http://www.lm-sensors.org/wiki/Devices for driver status. > [EMAIL PROTECTED]:~$ sensors > No sensors found! > Make sure you loaded all the kernel drivers you need. > Try sensors-detect to find out which these are. > ~~~~~~~~~~~~~~~~~~~~~~ > > I'm lost. > > -- > fan fails to start system overheats. > https://bugs.launchpad.net/bugs/292374 > You received this bug notification because you are a direct subscriber > of the bug. > > Status in Ubuntu: New > > Bug description: > version: ubuntu 8.10 > > bug: fan fails to start and the system over heats. this can destroy pcs if > not dealt with. > > systems effected by bug: many hp laptops, acer laptops, > > other info: the fan works in hardy heron (8.04) and windows so it is a > problem with interpid. > -- Duane Hinnen [EMAIL PROTECTED] -- fan fails to start system overheats. https://bugs.launchpad.net/bugs/292374 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
