I am attaching startup log from my Opensuse 11.1 . I have the same issue
with opensuse also.
Inspecting /boot/System.map-2.6.27.5-2-default
Cannot find map file.
No module symbols loaded - kernel modules not enabled.
Cannot build symbol table - disabling symbol lookups
klogd 1.4.1, log source = ksyslog started.
<6>Initializing cgroup subsys cpuset
<6>Initializing cgroup subsys cpu
<5>Linux version 2.6.27.5-2-default ([EMAIL PROTECTED]) (gcc version 4.3.2
[gcc-4_3-branch revision 141291] (SUSE Linux) ) #1 SMP 2008-11-11 15:15:33
+0100
<6>Command line: root=/dev/disk/by-id/ata-ST9160821AS_5MA7Y7TW-part7
resume=/dev/disk/by-id/ata-ST9160821AS_5MA7Y7TW-part5 splash=silent vga=0x317
<4>KERNEL supported cpus:
<4> Intel GenuineIntel
<4> AMD AuthenticAMD
<4> Centaur CentaurHauls
<6>BIOS-provided physical RAM map:
<6> BIOS-e820: 0000000000000000 - 000000000009e000 (usable)
<6> BIOS-e820: 000000000009e000 - 00000000000a0000 (reserved)
<6> BIOS-e820: 00000000000d2000 - 0000000000100000 (reserved)
<6> BIOS-e820: 0000000000100000 - 000000003bf50000 (usable)
<6> BIOS-e820: 000000003bf50000 - 000000003bf65000 (ACPI data)
<6> BIOS-e820: 000000003bf65000 - 000000003bf66000 (ACPI NVS)
<6> BIOS-e820: 000000003bf66000 - 0000000040000000 (reserved)
<6> BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
<6> BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
<6> BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
<6> BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved)
<6>last_pfn = 0x3bf50 max_arch_pfn = 0x3ffffffff
<6>x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
<6>init_memory_mapping
<7> 0000000000 - 003be00000 page 2M
<7> 003be00000 - 003bf50000 page 4k
<7>kernel direct mapping tables up to 3bf50000 @ 8000-b000
<6>last_map_addr: 3bf50000 end: 3bf50000
<6>RAMDISK: 379e3000 - 37fef89e
<6>DMI present.
<4>ACPI: RSDP 000F8250, 0024 (r2 PTLTD )
<4>ACPI: XSDT 3BF5C0CE, 006C (r1 HPQOEM SLIC-MPC 6040000 LTP 0)
<4>ACPI: FACP 3BF649BA, 00F4 (r3 NVIDIA MCP67-M 6040000 PTL_ F4240)
<4>ACPI: DSDT 3BF5C13A, 880C (r1 NVIDIA MCP67 6040000 MSFT 3000000)
<4>ACPI: FACS 3BF65FC0, 0040
<4>ACPI: TCPA 3BF64AAE, 0032 (r1 Phoeni x 6040000 TL 0)
<4>ACPI: SRAT 3BF64AE0, 00A0 (r1 AMD HAMMER 6040000 AMD 1)
<4>ACPI: SSDT 3BF64B80, 0206 (r1 PTLTD POWERNOW 6040000 LTP 1)
<4>ACPI: MCFG 3BF64D86, 003C (r1 PTLTD MCFG 6040000 LTP 0)
<4>ACPI: HPET 3BF64DC2, 0038 (r1 PTLTD HPETTBL 6040000 LTP 1)
<4>ACPI: APIC 3BF64DFA, 0068 (r1 PTLTD APIC 6040000 LTP 0)
<4>ACPI: BOOT 3BF64E62, 0028 (r1 PTLTD $SBFTBL$ 6040000 LTP 1)
<4>ACPI: SLIC 3BF64E8A, 0176 (r1 HPQOEM SLIC-MPC 6040000 LTP 1)
<5>ACPI: DMI detected: Hewlett-Packard
<6>SRAT: PXM 0 -> APIC 0 -> Node 0
<6>SRAT: PXM 0 -> APIC 1 -> Node 0
<6>SRAT: Node 0 PXM 0 0-a0000
<6>SRAT: Node 0 PXM 0 100000-40000000
<7>NUMA: Allocated memnodemap from 9000 - 9880
<7>NUMA: Using 20 for the hash shift.
<6>Bootmem setup node 0 0000000000000000-000000003bf50000
<6> NODE_DATA [0000000000009880 - 000000000001e87f]
<6> bootmap [000000000001f000 - 00000000000267ef] pages 8
<6>(7 early reservations) ==> bootmem [0000000000 - 003bf50000]
<6> #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 -
0000001000]
<6> #1 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 -
0000008000]
<6> #2 [0000200000 - 0000b62f78] TEXT DATA BSS ==> [0000200000 -
0000b62f78]
<6> #3 [00379e3000 - 0037fef89e] RAMDISK ==> [00379e3000 -
0037fef89e]
<6> #4 [000009e000 - 0000100000] BIOS reserved ==> [000009e000 -
0000100000]
<6> #5 [0000008000 - 0000009000] PGTABLE ==> [0000008000 -
0000009000]
<6> #6 [0000009000 - 0000009880] MEMNODEMAP ==> [0000009000 -
0000009880]
<6>found SMP MP-table at [ffff8800000f8220] 000f8220
<7> [ffffe20000000000-ffffe20000ffffff] PMD ->
[ffff880001200000-ffff8800021fffff] on node 0
<4>Zone PFN ranges:
<4> DMA 0x00000000 -> 0x00001000
<4> DMA32 0x00001000 -> 0x00100000
<4> Normal 0x00100000 -> 0x00100000
<4>Movable zone start PFN for each node
<4>early_node_map[2] active PFN ranges
<4> 0: 0x00000000 -> 0x0000009e
<4> 0: 0x00000100 -> 0x0003bf50
<7>On node 0 totalpages: 245486
<7> DMA zone: 1428 pages, LIFO batch:0
<7> DMA32 zone: 237714 pages, LIFO batch:31
<6>Detected use of extended apic ids on hypertransport bus
<6>ACPI: PM-Timer IO Port: 0x1008
<7>ACPI: Local APIC address 0xfee00000
<6>ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
<6>ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
<6>ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
<6>ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
<6>ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
<6>IOAPIC[0]: apic_id 2, version 0, address 0xfec00000, GSI 0-23
<6>ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
<6>ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
<7>ACPI: IRQ0 used by override.
<7>ACPI: IRQ2 used by override.
<7>ACPI: IRQ9 used by override.
<6>ACPI: HPET id: 0x10de8201 base: 0xfed00000
<6>Using ACPI (MADT) for SMP configuration information
<6>SMP: Allowing 2 CPUs, 0 hotplug CPUs
<6>PM: Registered nosave memory: 000000000009e000 - 00000000000a0000
<6>PM: Registered nosave memory: 00000000000a0000 - 00000000000d2000
<6>PM: Registered nosave memory: 00000000000d2000 - 0000000000100000
<6>Allocating PCI resources starting at 50000000 (gap: 40000000:a0000000)
<6>PERCPU: Allocating 62240 bytes of per cpu data
<7>NR_CPUS: 128, nr_cpu_ids: 2, nr_node_ids 1
<4>Built 1 zonelists in Node order, mobility grouping on. Total pages: 239142
<4>Policy zone: DMA32
<5>Kernel command line: root=/dev/disk/by-id/ata-ST9160821AS_5MA7Y7TW-part7
resume=/dev/disk/by-id/ata-ST9160821AS_5MA7Y7TW-part5 splash=silent vga=0x317
<6>bootsplash: silent mode.
<6>Initializing CPU#0
<4>PID hash table entries: 4096 (order: 12, 32768 bytes)
<6>Extended CMOS year: 2000
<6>TSC: PIT calibration confirmed by PMTIMER.
<6>TSC: using PIT calibration value
<4>Detected 1900.121 MHz processor.
<7>spurious 8259A interrupt: IRQ7.
<4>Console: colour dummy device 80x25
<6>console [tty0] enabled
<6>Checking aperture...
<6>No AGP bridge found
<6>Node 0: aperture @ 480000000 size 32 MB
<3>Aperture beyond 4GB. Ignoring.
<6>Memory: 949416k/982336k available (2756k kernel code, 32528k reserved, 2631k
data, 1464k init)
<7>CPA: page pool initialized 1 of 1 pages preallocated
<7>hpet clockevent registered
<6>Calibrating delay loop (skipped), value calculated using timer frequency..
3800.24 BogoMIPS (lpj=7600484)
<4>kdb version 4.4 by Keith Owens, Scott Lurndal. Copyright SGI, All Rights
Reserved
<6>Security Framework initialized
<6>SELinux: Disabled at boot.
<6>AppArmor: AppArmor initialized
<6>Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes)
<6>Inode-cache hash table entries: 65536 (order: 7, 524288 bytes)
<4>Mount-cache hash table entries: 256
<6>Initializing cgroup subsys ns
<6>Initializing cgroup subsys cpuacct
<6>Initializing cgroup subsys memory
<6>Initializing cgroup subsys devices
<6>Initializing cgroup subsys freezer
<6>CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
<6>CPU: L2 Cache: 512K (64 bytes/line)
<6>CPU 0/0 -> Node 0
<7>tseg: 003bf80000
<6>CPU: Physical Processor ID: 0
<6>CPU: Processor Core ID: 0
<6>using C1E aware idle routine
<6>ACPI: Core revision 20080609
<6>ACPI: Checking initramfs for custom DSDT
<4>Parsing all Control Methods:
<4>Table [DSDT](id 0001) - 904 Objects with 90 Devices 284 Methods 34 Regions
<4>Parsing all Control Methods:
<4>Table [SSDT](id 0002) - 8 Objects with 0 Devices 0 Methods 0 Regions
<4> tbxface-0596 [00] tb_load_namespace : ACPI Tables successfully acquired
<4>evxfevnt-0091 [00] enable : Transition to ACPI mode
successful
<6>Setting APIC routing to flat
<6>..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
<6>CPU0: AMD Turion(tm) 64 X2 Mobile Technology TL-58 stepping 02
<6>Using local APIC timer interrupts.
<7>APIC timer calibration result 12500847
<6>Detected 12.500 MHz APIC timer.
<6>Booting processor 1/1 ip 6000
<6>Initializing CPU#1
<6>Calibrating delay using timer specific routine.. 3800.32 BogoMIPS
(lpj=7600642)
<6>CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
<6>CPU: L2 Cache: 512K (64 bytes/line)
<6>CPU 1/1 -> Node 0
<6>CPU: Physical Processor ID: 0
<6>CPU: Processor Core ID: 1
<6>x86 PAT enabled: cpu 1, old 0x7040600070406, new 0x7010600070106
<6>CPU1: AMD Turion(tm) 64 X2 Mobile Technology TL-58 stepping 02
<6>System has AMD C1E enabled
<6>Switch to broadcast mode on CPU0
<6>Brought up 2 CPUs
<6>Total of 2 processors activated (7600.56 BogoMIPS).
<7>CPU0 attaching sched-domain:
<7> domain 0: span 0-1 level CPU
<7> groups: 0 1
<7> domain 1: span 0-1 level NODE
<7> groups: 0-1
<7>CPU1 attaching sched-domain:
<7> domain 0: span 0-1 level CPU
<7> groups: 1 0
<7> domain 1: span 0-1 level NODE
<7> groups: 0-1
<6>Switch to broadcast mode on CPU1
<6>net_namespace: 1936 bytes
<6>Booting paravirtualized kernel on bare hardware
<6>NET: Registered protocol family 16
<7>node 0 link 0: io port [1000, fffff]
<6>TOM: 0000000040000000 aka 1024M
<7>node 0 link 0: mmio [a0000, bffff]
<7>node 0 link 0: mmio [40000000, dfffffff]
<7>node 0 link 0: mmio [e0000000, efffffff]
<7>node 0 link 0: mmio [f0000000, fe0bffff]
<7>bus: [00,ff] on node 0 link 0
<7>bus: 00 index 0 io port: [0, ffff]
<7>bus: 00 index 1 mmio: [a0000, bffff]
<7>bus: 00 index 2 mmio: [40000000, fcffffffff]
<6>ACPI: bus type pci registered
<5>PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 4
<5>PCI: MCFG area at e0000000 reserved in E820
<6>PCI: Using MMCONFIG at e0000000 - e04fffff
<6>PCI: Using configuration type 1 for base access
<5>perfmon: version 2.82
<5>perfmon: CPU hotplug support enabled
<4>evgpeblk-0957 [00] ev_create_gpe_block : GPE 00 to 1F [_GPE] 4 regs on int
0x9
<7>ACPI: EC: Look up EC in DSDT
<4>Completing Region/Field/Buffer/Package
initialization:...............................................................................................................................
<4>Initialized 33/34 Regions 6/6 Fields 45/45 Buffers 43/43 Packages (921
nodes)
<4>Initializing Device/Processor/Thermal objects by executing _INI
methods:<5>ACPI: BIOS _OSI(Linux) query ignored via DMI
<4>.
<4>Executed 1 _INI methods requiring 1 _STA executions (examined 95 objects)
<4>evgpeblk-1054 [00] ev_initialize_gpe_bloc: Found 7 Wake, Enabled 2 Runtime
GPEs in this block
<6>ACPI: Interpreter enabled
<6>ACPI: (supports S0 S3 S4 S5)
<6>ACPI: Using IOAPIC for interrupt routing
<6>: ACPI: EC: non-query interrupt received, switching to interrupt mode
<6>: ACPI: EC: GPE = 0x10, I/O: command/status = 0x66, data = 0x62
<6>: ACPI: EC: driver started in interrupt mode
<6>ACPI: PCI Root Bridge [PCI0] (0000:00)
<7>PCI: 0000:00:01.1 reg 10 io port: [3080, 30bf]
<7>PCI: 0000:00:01.1 reg 20 io port: [3040, 307f]
<7>PCI: 0000:00:01.1 reg 24 io port: [3000, 303f]
<6>pci 0000:00:01.1: PME# supported from D3hot D3cold
<6>pci 0000:00:01.1: PME# disabled
<7>PCI: 0000:00:01.3 reg 10 32bit mmio: [f6200000, f627ffff]
<7>PCI: 0000:00:02.0 reg 10 32bit mmio: [f6486000, f6486fff]
<7>pci 0000:00:02.0: supports D1
<7>pci 0000:00:02.0: supports D2
<6>pci 0000:00:02.0: PME# supported from D0 D1 D2 D3hot D3cold
<6>pci 0000:00:02.0: PME# disabled
<7>PCI: 0000:00:02.1 reg 10 32bit mmio: [f6489000, f64890ff]
<7>pci 0000:00:02.1: supports D1
<7>pci 0000:00:02.1: supports D2
<6>pci 0000:00:02.1: PME# supported from D0 D1 D2 D3hot D3cold
<6>pci 0000:00:02.1: PME# disabled
<7>PCI: 0000:00:04.0 reg 10 32bit mmio: [f6487000, f6487fff]
<7>pci 0000:00:04.0: supports D1
<7>pci 0000:00:04.0: supports D2
<6>pci 0000:00:04.0: PME# supported from D0 D1 D2 D3hot D3cold
<6>pci 0000:00:04.0: PME# disabled
<7>PCI: 0000:00:04.1 reg 10 32bit mmio: [f6489400, f64894ff]
<7>pci 0000:00:04.1: supports D1
<7>pci 0000:00:04.1: supports D2
<6>pci 0000:00:04.1: PME# supported from D0 D1 D2 D3hot D3cold
<6>pci 0000:00:04.1: PME# disabled
<7>PCI: 0000:00:06.0 reg 20 io port: [30c0, 30cf]
<7>PCI: 0000:00:07.0 reg 10 32bit mmio: [f6480000, f6483fff]
<6>pci 0000:00:07.0: PME# supported from D3hot D3cold
<6>pci 0000:00:07.0: PME# disabled
<7>PCI: 0000:00:09.0 reg 10 io port: [30f0, 30f7]
<7>PCI: 0000:00:09.0 reg 14 io port: [30e4, 30e7]
<7>PCI: 0000:00:09.0 reg 18 io port: [30e8, 30ef]
<7>PCI: 0000:00:09.0 reg 1c io port: [30e0, 30e3]
<7>PCI: 0000:00:09.0 reg 20 io port: [30d0, 30df]
<7>PCI: 0000:00:09.0 reg 24 32bit mmio: [f6484000, f6485fff]
<7>PCI: 0000:00:0a.0 reg 10 32bit mmio: [f6488000, f6488fff]
<7>PCI: 0000:00:0a.0 reg 14 io port: [30f8, 30ff]
<7>PCI: 0000:00:0a.0 reg 18 32bit mmio: [f6489c00, f6489cff]
<7>PCI: 0000:00:0a.0 reg 1c 32bit mmio: [f6489800, f648980f]
<7>pci 0000:00:0a.0: supports D1
<7>pci 0000:00:0a.0: supports D2
<6>pci 0000:00:0a.0: PME# supported from D0 D1 D2 D3hot D3cold
<6>pci 0000:00:0a.0: PME# disabled
<6>pci 0000:00:0c.0: PME# supported from D0 D1 D2 D3hot D3cold
<6>pci 0000:00:0c.0: PME# disabled
<6>pci 0000:00:0d.0: PME# supported from D0 D1 D2 D3hot D3cold
<6>pci 0000:00:0d.0: PME# disabled
<7>PCI: 0000:00:12.0 reg 10 32bit mmio: [f5000000, f5ffffff]
<7>PCI: 0000:00:12.0 reg 14 64bit mmio: [d0000000, dfffffff]
<7>PCI: 0000:00:12.0 reg 1c 64bit mmio: [f4000000, f4ffffff]
<7>PCI: 0000:00:12.0 reg 30 32bit mmio: [0, 1ffff]
<7>PCI: 0000:02:05.0 reg 10 32bit mmio: [0, 7ff]
<7>pci 0000:02:05.0: supports D1
<7>pci 0000:02:05.0: supports D2
<6>pci 0000:02:05.0: PME# supported from D0 D1 D2 D3hot D3cold
<6>pci 0000:02:05.0: PME# disabled
<7>PCI: 0000:02:05.1 reg 10 32bit mmio: [f6100800, f61008ff]
<7>pci 0000:02:05.1: supports D1
<7>pci 0000:02:05.1: supports D2
<6>pci 0000:02:05.1: PME# supported from D0 D1 D2 D3hot D3cold
<6>pci 0000:02:05.1: PME# disabled
<7>PCI: 0000:02:05.2 reg 10 32bit mmio: [f6100c00, f6100cff]
<7>pci 0000:02:05.2: supports D1
<7>pci 0000:02:05.2: supports D2
<6>pci 0000:02:05.2: PME# supported from D0 D1 D2 D3hot D3cold
<6>pci 0000:02:05.2: PME# disabled
<7>PCI: 0000:02:05.3 reg 10 32bit mmio: [f6101000, f61010ff]
<7>pci 0000:02:05.3: supports D1
<7>pci 0000:02:05.3: supports D2
<6>pci 0000:02:05.3: PME# supported from D0 D1 D2 D3hot D3cold
<6>pci 0000:02:05.3: PME# disabled
<7>PCI: 0000:02:05.4 reg 10 32bit mmio: [f6101400, f61014ff]
<7>pci 0000:02:05.4: supports D1
<7>pci 0000:02:05.4: supports D2
<6>pci 0000:02:05.4: PME# supported from D0 D1 D2 D3hot D3cold
<6>pci 0000:02:05.4: PME# disabled
<6>pci 0000:00:08.0: transparent bridge
<7>PCI: bridge 0000:00:08.0 32bit mmio: [f6100000, f61fffff]
<7>PCI: bridge 0000:00:0c.0 io port: [4000, 4fff]
<7>PCI: bridge 0000:00:0c.0 32bit mmio: [f2000000, f3ffffff]
<7>PCI: bridge 0000:00:0c.0 64bit mmio pref: [f0000000, f1ffffff]
<7>PCI: 0000:03:00.0 reg 10 64bit mmio: [f6000000, f6003fff]
<7>pci 0000:03:00.0: supports D1
<7>pci 0000:03:00.0: supports D2
<7>PCI: bridge 0000:00:0d.0 32bit mmio: [f6000000, f60fffff]
<7>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
<7>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P2P0._PRT]
<7>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.XVR1._PRT]
<7>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.XVR2._PRT]
<6>ACPI: PCI Interrupt Link [LNK1] (IRQs 5) *10
<6>ACPI: PCI Interrupt Link [LNK2] (IRQs 7) *11
<6>ACPI: PCI Interrupt Link [LNK3] (IRQs 10) *0, disabled.
<6>ACPI: PCI Interrupt Link [LNK4] (IRQs 11) *0, disabled.
<6>ACPI: PCI Interrupt Link [LK1E] (IRQs 16) *0, disabled.
<6>ACPI: PCI Interrupt Link [LK2E] (IRQs 17) *0, disabled.
<6>ACPI: PCI Interrupt Link [LK3E] (IRQs 18) *0, disabled.
<6>ACPI: PCI Interrupt Link [LK4E] (IRQs 19) *10
<6>ACPI: PCI Interrupt Link [LSMB] (IRQs *10)
<6>ACPI: PCI Interrupt Link [LUS0] (IRQs 18) *11
<6>ACPI: PCI Interrupt Link [LUS2] (IRQs 22) *7
<6>ACPI: PCI Interrupt Link [LMAC] (IRQs 20) *11
<6>ACPI: PCI Interrupt Link [LAZA] (IRQs 21) *10
<6>ACPI: PCI Interrupt Link [LGPU] (IRQs 16) *10
<6>ACPI: PCI Interrupt Link [LPID] (IRQs 22) *0, disabled.
<6>ACPI: PCI Interrupt Link [LSI0] (IRQs 23) *11
<6>ACPI: PCI Interrupt Link [Z018] (IRQs 18) *5
<6>ACPI: PCI Interrupt Link [Z019] (IRQs 22) *10
<6>ACPI: PCI Interrupt Link [LPMU] (IRQs *11)
<6>Linux Plug and Play Support v0.97 (c) Adam Belay
<6>pnp: PnP ACPI init
<6>ACPI: bus type pnp registered
<6>pnp: PnP ACPI: found 12 devices
<6>ACPI: ACPI bus type pnp unregistered
<6>PCI: Using ACPI for IRQ routing
<6>hpet0: at MMIO 0xfed00000, IRQs 2, 8, 31
<6>hpet0: 3 32-bit timers, 25000000 Hz
<6>AppArmor: AppArmor Filesystem Enabled
<7>Switched to high resolution mode on CPU 0
<7>Switched to high resolution mode on CPU 1
<4>ACPI: RTC can wake from S4
<6>system 00:02: iomem range 0xe0000000-0xefffffff could not be reserved
<6>system 00:03: ioport range 0x1000-0x107f has been reserved
<6>system 00:03: ioport range 0x1080-0x10ff has been reserved
<6>system 00:03: ioport range 0x1400-0x147f has been reserved
<6>system 00:03: ioport range 0x1480-0x14ff has been reserved
<6>system 00:03: ioport range 0x1800-0x187f has been reserved
<6>system 00:03: ioport range 0x1880-0x18ff has been reserved
<6>system 00:04: ioport range 0x360-0x361 has been reserved
<6>system 00:04: ioport range 0x4d0-0x4d1 has been reserved
<6>system 00:0b: iomem range 0xffc00000-0xffffffff could not be reserved
<6>system 00:0b: iomem range 0xfec00000-0xfec00fff could not be reserved
<6>system 00:0b: iomem range 0xfee00000-0xfeefffff could not be reserved
<6>system 00:0b: iomem range 0xfed00000-0xfed00fff has been reserved
<6>system 00:0b: iomem range 0xfef00000-0xfef00fff has been reserved
<6>pci 0000:00:08.0: PCI bridge, secondary bus 0000:02
<6>pci 0000:00:08.0: IO window: disabled
<6>pci 0000:00:08.0: MEM window: 0xf6100000-0xf61fffff
<6>pci 0000:00:08.0: PREFETCH window: disabled
<6>pci 0000:00:0c.0: PCI bridge, secondary bus 0000:04
<6>pci 0000:00:0c.0: IO window: 0x4000-0x4fff
<6>pci 0000:00:0c.0: MEM window: 0xf2000000-0xf3ffffff
<6>pci 0000:00:0c.0: PREFETCH window: 0x000000f0000000-0x000000f1ffffff
<6>pci 0000:00:0d.0: PCI bridge, secondary bus 0000:03
<6>pci 0000:00:0d.0: IO window: disabled
<6>pci 0000:00:0d.0: MEM window: 0xf6000000-0xf60fffff
<6>pci 0000:00:0d.0: PREFETCH window: disabled
<7>pci 0000:00:08.0: setting latency timer to 64
<7>pci 0000:00:0c.0: setting latency timer to 64
<7>pci 0000:00:0d.0: setting latency timer to 64
<6>bus: 00 index 0 io port: [0, ffff]
<6>bus: 00 index 1 mmio: [0, ffffffffffffffff]
<6>bus: 02 index 0 mmio: [0, 0]
<6>bus: 02 index 1 mmio: [f6100000, f61fffff]
<6>bus: 02 index 2 mmio: [0, 0]
<6>bus: 02 index 3 io port: [0, ffff]
<6>bus: 02 index 4 mmio: [0, ffffffffffffffff]
<6>bus: 04 index 0 io port: [4000, 4fff]
<6>bus: 04 index 1 mmio: [f2000000, f3ffffff]
<6>bus: 04 index 2 mmio: [f0000000, f1ffffff]
<6>bus: 04 index 3 mmio: [0, 0]
<6>bus: 03 index 0 mmio: [0, 0]
<6>bus: 03 index 1 mmio: [f6000000, f60fffff]
<6>bus: 03 index 2 mmio: [0, 0]
<6>bus: 03 index 3 mmio: [0, 0]
<6>NET: Registered protocol family 2
<6>IP route cache hash table entries: 32768 (order: 6, 262144 bytes)
<6>TCP established hash table entries: 131072 (order: 9, 2097152 bytes)
<6>TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
<6>TCP: Hash tables configured (established 131072 bind 65536)
<6>TCP reno registered
<6>NET: Registered protocol family 1
<6>Unpacking initramfs... done
<6>Freeing initrd memory: 6194k freed
<6>Simple Boot Flag at 0x36 set to 0x1
<6>audit: initializing netlink socket (disabled)
<5>type=2000 audit(1227035125.733:1): initialized
<6>HugeTLB registered 2 MB page size, pre-allocated 0 pages
<5>VFS: Disk quotas dquot_6.5.1
<4>Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
<6>msgmni has been set to 466
<6>Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254)
<6>io scheduler noop registered
<6>io scheduler anticipatory registered
<6>io scheduler deadline registered
<6>io scheduler cfq registered (default)
<6>perfmon: added sampling format default
<6>pci 0000:00:00.0: Enabling HT MSI Mapping
<6>pci 0000:00:07.0: Enabling HT MSI Mapping
<6>pci 0000:00:08.0: Enabling HT MSI Mapping
<6>pci 0000:00:09.0: Enabling HT MSI Mapping
<6>pci 0000:00:0a.0: Enabling HT MSI Mapping
<6>pci 0000:00:0c.0: Enabling HT MSI Mapping
<6>pci 0000:00:0d.0: Enabling HT MSI Mapping
<7>pci 0000:00:12.0: Boot video device
<7>pcieport-driver 0000:00:0c.0: setting latency timer to 64
<6>pcieport-driver 0000:00:0c.0: found MSI capability
<7>pci_express 0000:00:0c.0:pcie00: allocate port service
<7>pci_express 0000:00:0c.0:pcie03: allocate port service
<7>pcieport-driver 0000:00:0d.0: setting latency timer to 64
<6>pcieport-driver 0000:00:0d.0: found MSI capability
<7>pci_express 0000:00:0d.0:pcie00: allocate port service
<7>pci_express 0000:00:0d.0:pcie03: allocate port service
<6>vesafb: framebuffer at 0xd0000000, mapped to 0xffffc20000a80000, using
6144k, total 65536k
<6>vesafb: mode is 1024x768x16, linelength=2048, pages=1
<6>vesafb: scrolling: redraw
<6>vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
<6>bootsplash 3.1.6-2004/03/31: looking for picture...
<6>bootsplash: silentjpeg size 100719 bytes
<6>bootsplash: ...found (1024x768, 38691 bytes, v3).
<4>Console: switching to colour frame buffer device 124x44
<6>fb0: VESA VGA frame buffer device
<7>hpet_resources: 0xfed00000 is busy
<6>Non-volatile memory driver v1.2
<6>Linux agpgart interface v0.103
<6>Serial: 8250/16550 driver8 ports, IRQ sharing disabled
<6>PNP: PS/2 Controller [PNP0303:KBC0,PNP0f13:MSE0] at 0x60,0x64 irq 1,12
<6>serio: i8042 KBD port at 0x60,0x64 irq 1
<6>serio: i8042 AUX port at 0x60,0x64 irq 12
<6>mice: PS/2 mouse device common for all mice
<6>cpuidle: using governor ladder
<6>cpuidle: using governor menu
<6>input: AT Translated Set 2 keyboard as
/devices/platform/i8042/serio0/input/input0
<6>TCP cubic registered
<4>registered taskstats version 1
<6>Freeing unused kernel memory: 1464k freed
<6>Write protecting the kernel read-only data: 5064k
<5>ACPI: processor limited to max C-state 1
<6>ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
<6>processor ACPI0007:00: registered as cooling_device0
<6>ACPI: Processor [CPU0] (supports 8 throttling states)
<6>ACPI: CPU1 (power states: C1[C1] C2[C2] C3[C3])
<6>processor ACPI0007:01: registered as cooling_device1
<6>ACPI: Processor [CPU1] (supports 8 throttling states)
<4>ACPI Exception (thermal-0378): AE_OK, No or invalid critical threshold
[20080609]
<6>ACPI: No dock devices found.
<5>SCSI subsystem initialized
<7>libata version 3.00 loaded.
<7>ahci 0000:00:09.0: version 3.0
<4>ACPI: PCI Interrupt Link [LSI0] enabled at IRQ 23
<6>ahci 0000:00:09.0: PCI INT A -> Link[LSI0] -> GSI 23 (level, low) -> IRQ 23
<6>ahci 0000:00:09.0: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0xf impl IDE mode
<6>ahci 0000:00:09.0: flags: 64bit sntf led clo pmp pio slum part
<7>ahci 0000:00:09.0: setting latency timer to 64
<6>scsi0 : ahci
<6>scsi1 : ahci
<6>scsi2 : ahci
<6>scsi3 : ahci
<6>ata1: SATA max UDMA/133 abar [EMAIL PROTECTED] port 0xf6484100 irq 4349
<6>ata2: SATA max UDMA/133 abar [EMAIL PROTECTED] port 0xf6484180 irq 4349
<6>ata3: SATA max UDMA/133 abar [EMAIL PROTECTED] port 0xf6484200 irq 4349
<6>ata4: SATA max UDMA/133 abar [EMAIL PROTECTED] port 0xf6484280 irq 4349
<6>ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
<6>ata1.00: ATA-7: ST9160821AS, 3.BHE, max UDMA/100
<6>ata1.00: 312581808 sectors, multi 16: LBA48
<6>ata1.00: configured for UDMA/100
<6>Synaptics Touchpad, model: 1, fw: 6.3, id: 0x1a0b1, caps: 0xa04713/0x200000
<6>input: SynPS/2 Synaptics TouchPad as
/devices/platform/i8042/serio1/input/input1
********* Here my system starts freezing unless i press and hold a key********
*******************************************************************************
<6>ata2: SATA link down (SStatus 0 SControl 300)
<6>ata3: SATA link down (SStatus 0 SControl 300)
<6>ata4: SATA link down (SStatus 0 SControl 300)
<5>scsi 0:0:0:0: Direct-Access ATA ST9160821AS 3.BH PQ: 0 ANSI: 5
<6>BIOS EDD facility v0.16 2004-Jun-25, 1 devices found
<6>udevd version 128 started
<6>: usbcore: registered new interface driver usbfs
<6>: usbcore: registered new interface driver hub
<6>: usbcore: registered new device driver usb
<5>sd 0:0:0:0: [sda] 312581808 512-byte hardware sectors: (160GB/149GiB)
<5>sd 0:0:0:0: [sda] Write Protect is off
<7>sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
<7>ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
<5>sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support
DPO or FUA
<4>ACPI: PCI Interrupt Link [LUS0] enabled at IRQ 18
<6>ohci_hcd 0000:00:02.0: PCI INT A -> Link[LUS0] -> GSI 18 (level, low) -> IRQ
18
<7>ohci_hcd 0000:00:02.0: setting latency timer to 64
<6>ohci_hcd 0000:00:02.0: OHCI Host Controller
<6>ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 1
<6>ohci_hcd 0000:00:02.0: irq 18, io mem 0xf6486000
<4>Warning! ehci_hcd should always be loaded before uhci_hcd and ohci_hcd, not
after
<5>sd 0:0:0:0: [sda] 312581808 512-byte hardware sectors: (160GB/149GiB)
<5>sd 0:0:0:0: [sda] Write Protect is off
<7>sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
<5>sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support
DPO or FUA
<6> sda: sda1 sda2 sda3 < sda5 sda6 sda7 > sda4
<6>usb usb1: configuration #1 chosen from 1 choice
<6>hub 1-0:1.0: USB hub found
<6>hub 1-0:1.0: 7 ports detected
<5>sd 0:0:0:0: [sda] Attached SCSI disk
<6>usb usb1: New USB device found, idVendor=1d6b, idProduct=0001
<6>usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
<6>usb usb1: Product: OHCI Host Controller
<6>usb usb1: Manufacturer: Linux 2.6.27.5-2-default ohci_hcd
<6>usb usb1: SerialNumber: 0000:00:02.0
<4>ACPI: PCI Interrupt Link [Z018] enabled at IRQ 18
<6>ohci_hcd 0000:00:04.0: PCI INT A -> Link[Z018] -> GSI 18 (level, low) -> IRQ
18
<7>ohci_hcd 0000:00:04.0: setting latency timer to 64
<6>ohci_hcd 0000:00:04.0: OHCI Host Controller
<6>ohci_hcd 0000:00:04.0: new USB bus registered, assigned bus number 2
<6>ohci_hcd 0000:00:04.0: irq 18, io mem 0xf6487000
<6>usb usb2: configuration #1 chosen from 1 choice
<6>hub 2-0:1.0: USB hub found
<6>hub 2-0:1.0: 2 ports detected
<6>usb 1-4: new low speed USB device using ohci_hcd and address 2
<6>usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
<6>usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
<6>usb usb2: Product: OHCI Host Controller
<6>usb usb2: Manufacturer: Linux 2.6.27.5-2-default ohci_hcd
<6>usb usb2: SerialNumber: 0000:00:04.0
<4>ACPI: PCI Interrupt Link [LUS2] enabled at IRQ 22
<6>ehci_hcd 0000:00:02.1: PCI INT B -> Link[LUS2] -> GSI 22 (level, low) -> IRQ
22
<7>ehci_hcd 0000:00:02.1: setting latency timer to 64
<6>ehci_hcd 0000:00:02.1: EHCI Host Controller
<6>ehci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 3
<6>ehci_hcd 0000:00:02.1: debug port 1
<7>ehci_hcd 0000:00:02.1: cache line size of 64 is not supported
<6>ehci_hcd 0000:00:02.1: irq 22, io mem 0xf6489000
<6>ehci_hcd 0000:00:02.1: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
<6>usb usb3: configuration #1 chosen from 1 choice
<6>hub 3-0:1.0: USB hub found
<6>hub 3-0:1.0: 7 ports detected
<6>usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
<6>usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
<6>usb usb3: Product: EHCI Host Controller
<6>usb usb3: Manufacturer: Linux 2.6.27.5-2-default ehci_hcd
<6>usb usb3: SerialNumber: 0000:00:02.1
<4>ACPI: PCI Interrupt Link [Z019] enabled at IRQ 22
<6>ehci_hcd 0000:00:04.1: PCI INT B -> Link[Z019] -> GSI 22 (level, low) -> IRQ
22
<7>ehci_hcd 0000:00:04.1: setting latency timer to 64
<6>ehci_hcd 0000:00:04.1: EHCI Host Controller
<6>ehci_hcd 0000:00:04.1: new USB bus registered, assigned bus number 4
<6>ehci_hcd 0000:00:04.1: debug port 1
<7>ehci_hcd 0000:00:04.1: cache line size of 64 is not supported
<6>ehci_hcd 0000:00:04.1: irq 22, io mem 0xf6489400
<6>ehci_hcd 0000:00:04.1: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
<6>usb usb4: configuration #1 chosen from 1 choice
<6>hub 4-0:1.0: USB hub found
<6>hub 4-0:1.0: 2 ports detected
<3>usb 1-4: device not accepting address 2, error -62
<3>hub 1-0:1.0: unable to enumerate USB device on port 4
<6>usb usb4: New USB device found, idVendor=1d6b, idProduct=0002
<6>usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
<6>usb usb4: Product: EHCI Host Controller
<6>usb usb4: Manufacturer: Linux 2.6.27.5-2-default ehci_hcd
<6>usb usb4: SerialNumber: 0000:00:04.1
<6>PM: Starting manual resume from disk
<6>usb 1-4: new low speed USB device using ohci_hcd and address 4
<6>usb 1-4: configuration #1 chosen from 1 choice
<6>usb 1-4: New USB device found, idVendor=15ca, idProduct=00c3
<6>usb 1-4: New USB device strings: Mfr=0, Product=2, SerialNumber=0
<6>usb 1-4: Product: USB Optical Mouse
<6>usb 2-1: new full speed USB device using ohci_hcd and address 2
<6>usb 2-1: configuration #1 chosen from 1 choice
<6>usb 2-1: New USB device found, idVendor=03f0, idProduct=171d
<6>usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
<6>usb 2-1: Product: HP Integrated Module
<6>usb 2-1: Manufacturer: Broadcom Corp
<6>: usbcore: registered new interface driver hiddev
<6>input: USB Optical Mouse as
/devices/pci0000:00/0000:00:02.0/usb1/1-4/1-4:1.0/input/input2
<6>input,hidraw0: USB HID v1.10 Mouse [USB Optical Mouse] on usb-0000:00:02.0-4
<6>: usbcore: registered new interface driver usbhid
<6>usbhid: v2.6:USB HID core driver
<6>kjournald starting. Commit interval 5 seconds
<6>EXT3 FS on sda7, internal journal
<6>EXT3-fs: mounted filesystem with ordered data mode.
<6>udevd version 128 started
<6>Bluetooth: Core ver 2.13
<6>NET: Registered protocol family 31
<6>Bluetooth: HCI device and connection manager initialized
<6>Bluetooth: HCI socket layer initialized
<5>sd 0:0:0:0: Attached scsi generic sg0 type 0
<6>input: Power Button (FF) as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
<7>pata_amd 0000:00:06.0: version 0.3.10
<7>pata_amd 0000:00:06.0: setting latency timer to 64
<6>scsi4 : pata_amd
<6>scsi5 : pata_amd
<6>ata5: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0x30c0 irq 14
<6>ata6: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0x30c8 irq 15
<6>ACPI: Power Button (FF) [PWRF]
<6>input: Sleep Button (CM) as
/devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input4
<6>ACPI: Sleep Button (CM) [SLPB]
<6>ACPI: AC Adapter [ACAD] (on-line)
<6>input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input5
<6>ata5.00: ATAPI: TSSTcorpCD/DVDW TS-L632D, HH18, max MWDMA2
<7>ata5: nv_mode_filter: 0x39f&0x39f->0x39f, BIOS=0x0 (0xc600) ACPI=0x39f
(120:600:0x12)
<6>ACPI: Lid Switch [LID]
<6>ata5.00: configured for MWDMA2
<7>ata6: port disabled. ignoring.
<4>isa bounce pool size: 16 pages
<5>scsi 4:0:0:0: CD-ROM TSSTcorp CD/DVDW TS-L632D HH18 PQ: 0 ANSI: 5
<5>scsi 4:0:0:0: Attached scsi generic sg1 type 5
<6>ricoh-mmc: Ricoh MMC Controller disabling driver
<6>ricoh-mmc: Copyright(c) Philip Langdale
<6>ricoh-mmc: Ricoh MMC controller found at 0000:02:05.2 [1180:0843] (rev 12)
<6>ricoh-mmc: Controller is now disabled.
<6>ohci1394 0000:02:05.0: enabling device (0100 -> 0102)
<4>ACPI: PCI Interrupt Link [LNK1] enabled at IRQ 5
<6>vendor=10de device=0561
<6>ohci1394 0000:02:05.0: PCI INT A -> Link[LNK1] -> GSI 5 (level, low) -> IRQ
5
<6>ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[5] MMIO=[f6100000-f61007ff]
Max Packet=[2048] IR/IT contexts=[4/4]
<6>ACPI: Battery Slot [BAT0] (battery present)
<6>input: Power Button (CM) as
/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input6
<6>ACPI: Power Button (CM) [PWRB]
<4>nvidia: module license 'NVIDIA' taints kernel.
<4>ACPI: PCI Interrupt Link [LGPU] enabled at IRQ 16
<6>nvidia 0000:00:12.0: PCI INT A -> Link[LGPU] -> GSI 16 (level, low) -> IRQ
16
<7>nvidia 0000:00:12.0: setting latency timer to 64
<4>NVRM: loading NVIDIA UNIX x86_64 Kernel Module 177.80 Wed Oct 1 14:43:46
PDT 2008
<6>ACPI: WMI: Mapper loaded
<6>Bluetooth: HCI USB driver ver 2.10
<6>: usbcore: registered new interface driver hci_usb
<6>forcedeth: Reverse Engineered nForce ethernet driver. Version 0.61.
<4>ACPI: PCI Interrupt Link [LMAC] enabled at IRQ 20
<6>forcedeth 0000:00:0a.0: PCI INT A -> Link[LMAC] -> GSI 20 (level, low) ->
IRQ 20
<7>forcedeth 0000:00:0a.0: setting latency timer to 64
<6>input: PC Speaker as /devices/platform/pcspkr/input/input7
<6>acpi device:25: registered as cooling_device2
<6>input: Video Bus as
/devices/LNXSYSTM:00/device:00/PNP0A08:00/device:23/input/input8
<6>ACPI: Video Device [UVGA] (multi-head: yes rom: no post: no)
<7>ieee1394: Host added: ID:BUS[0-00:1023] GUID[00241b003333c700]
<6>Uniform Multi-Platform E-IDE driver
<6>rtc_cmos 00:07: rtc core: registered rtc_cmos as rtc0
<6>: rtc0: alarms up to one year, y3k, hpet irqs
<6>sdhci: Secure Digital Host Controller Interface driver
<6>sdhci: Copyright(c) Pierre Ossman
<6>Bluetooth: Generic Bluetooth USB driver ver 0.3
<6>: usbcore: registered new interface driver btusb
<6>forcedeth 0000:00:0a.0: ifname eth0, PHY OUI 0x732 @ 1, addr
00:1e:68:2c:ae:f7
<6>forcedeth 0000:00:0a.0: highdma pwrctl mgmt timirq lnktim msi desc-v3
<4>ACPI: PCI Interrupt Link [LK4E] enabled at IRQ 19
<6>vendor=10de device=0563
<6>b43-pci-bridge 0000:03:00.0: PCI INT A -> Link[LK4E] -> GSI 19 (level, low)
-> IRQ 19
<6>sdhci-pci 0000:02:05.1: SDHCI controller found [1180:0822] (rev 22)
<7>b43-pci-bridge 0000:03:00.0: setting latency timer to 64
<4>ACPI: PCI Interrupt Link [LNK2] enabled at IRQ 7
<6>vendor=10de device=0561
<6>sdhci-pci 0000:02:05.1: PCI INT B -> Link[LNK2] -> GSI 7 (level, low) -> IRQ
7
<6>mmc0: SDHCI controller on PCI [0000:02:05.1] using PIO
<6>ssb: Sonics Silicon Backplane found on PCI device 0000:03:00.0
<4>ACPI: PCI Interrupt Link [LAZA] enabled at IRQ 21
<6>HDA Intel 0000:00:07.0: PCI INT A -> Link[LAZA] -> GSI 21 (level, low) ->
IRQ 21
<7>HDA Intel 0000:00:07.0: setting latency timer to 64
<4>sr0: scsi3-mmc drive: 47x/47x writer dvd-ram cd/rw xa/form2 cdda tray
<6>Uniform CD-ROM driver Revision: 3.20
<7>sr 4:0:0:0: Attached scsi CD-ROM sr0
<6>b43-phy0: Broadcom 4311 WLAN found
<7>phy0: Selected rate control algorithm 'pid'
<6>Broadcom 43xx driver loaded [ Features: PMLR, Firmware-ID: FW13 ]
<6>Adding 1261060k swap on /dev/sda5. Priority:-1 extents:1 across:1261060k
<6>device-mapper: uevent: version 1.0.3
<6>device-mapper: ioctl: 4.14.0-ioctl (2008-04-23) initialised:
[EMAIL PROTECTED]
<6>loop: module loaded
<6>kjournald starting. Commit interval 5 seconds
<6>EXT3 FS on sda6, internal journal
<6>EXT3-fs: mounted filesystem with ordered data mode.
<4>fuse init (API version 7.9)
Kernel logging (ksyslog) stopped.
Kernel log daemon terminating.
Boot logging started on /dev/tty1(/dev/console (deleted)) at Wed Nov 19
00:35:59 2008
done
Starting udevd: done
Loading drivers, configuring devices: done
Loading required kernel modules
doneActivating swap-devices in /etc/fstab...
doneSetting up the hardware clockdone
Activating device mapper...
done
Checking file systems...
fsck 1.41.1 (01-Sep-2008)
/dev/disk/by-id/ata-ST9160821AS_5MA7Y7TW-part6: recovering journal
/dev/disk/by-id/ata-ST9160821AS_5MA7Y7TW-part6: clean, 1247/705744 files,
110191/2821399 blocks
donedone
Mounting local file systems...
/proc on /proc type proc (rw)
sysfs on /sys type sysfs (rw)
debugfs on /sys/kernel/debug type debugfs (rw)
udev on /dev type tmpfs (rw)
devpts on /dev/pts type devpts (rw,mode=0620,gid=5)
/dev/sda6 on /home type ext3 (rw,acl,user_xattr)
done/etc/init.d/boot.braille: line 20: [: braille=1: binary operator expected
done
Fuse filesystem already availabledone
Mounting fuse control filesystemdone
Retry device configuration: done
Activating remaining swap-devices in /etc/fstab...
doneSetting current sysctl status from /etc/sysctl.conf
net.ipv4.icmp_echo_ignore_broadcasts = 1
net.ipv4.conf.all.rp_filter = 1
fs.inotify.max_user_watches = 65536
net.ipv4.conf.default.promote_secondaries = 1
net.ipv4.conf.all.promote_secondaries = 1
done
Turning quota on
Checking quotas. This may take some time.
done
Enabling syn flood protectiondone
Disabling IP forwardingdone
done
<notice>killproc: kill(694,29)
Creating /var/log/boot.msg
doneSetting up hostname 'linux-v5wz'done
Setting up loopback interface lo
lo IP address: 127.0.0.1/8
IP address: 127.0.0.2/8
done
System Boot Control: The system has been set up
System Boot Control: Running /etc/init.d/boot.local
done<notice>killproc: kill(694,3)
INIT:
Boot logging started on /dev/tty1(/dev/console) at Tue Nov 18 19:06:28 2008
Master Resource Control: previous runlevel: N, switching to runlevel: 5
Initializing random number generatordone
<notice>startproc: execve (/sbin/syslog-ng) [ /sbin/syslog-ng ], [
CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 TERM=linux SHELL=/bin/sh ROOTFS_FSCK=0
LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=124
PATH=/bin:/sbin:/usr/bin:/usr/sbin DO_CONFIRM= vga=0x317 RUNLEVEL=5
SPLASHCFG=/etc/bootsplash/themes/openSUSE/config/bootsplash-1024x768.cfg PWD=/
PREVLEVEL=N LINES=44 SHLVL=2 HOME=/ SPLASH=yes splash=silent
ROOTFS_BLKDEV=/dev/disk/by-id/ata-ST9160821AS_5MA7Y7TW-part7 _=/sbin/startproc
DAEMON=/sbin/syslog-ng ]
<notice>startproc: execve (/sbin/acpid) [ /sbin/acpid ], [ CONSOLE=/dev/console
ROOTFS_FSTYPE=ext3 SHELL=/bin/sh TERM=linux ROOTFS_FSCK=0 LC_ALL=POSIX
INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=124
PATH=/bin:/sbin:/usr/bin:/usr/sbin vga=0x317 DO_CONFIRM= RUNLEVEL=5 PWD=/
SPLASHCFG=/etc/bootsplash/themes/openSUSE/config/bootsplash-1024x768.cfg
PREVLEVEL=N LINES=44 HOME=/ SHLVL=2 splash=silent SPLASH=yes
ROOTFS_BLKDEV=/dev/disk/by-id/ata-ST9160821AS_5MA7Y7TW-part7 _=/sbin/startproc
DAEMON=/sbin/acpid ]
<notice>startproc: execve (/sbin/klogd) [ /sbin/klogd -c 1 -x ], [
CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 TERM=linux SHELL=/bin/sh ROOTFS_FSCK=0
LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=124
PATH=/bin:/sbin:/usr/bin:/usr/sbin DO_CONFIRM= vga=0x317 RUNLEVEL=5
SPLASHCFG=/etc/bootsplash/themes/openSUSE/config/bootsplash-1024x768.cfg PWD=/
PREVLEVEL=N LINES=44 SHLVL=2 HOME=/ SPLASH=yes splash=silent
ROOTFS_BLKDEV=/dev/disk/by-id/ata-ST9160821AS_5MA7Y7TW-part7 _=/sbin/startproc
DAEMON=/sbin/klogd ]
Starting acpid done
Starting syslog servicesdone
acpid: starting up
acpid: 2 rules loaded
Starting D-Bus daemondone
Starting Firewall Initialization (phase 1 of 2) done
Loading CPUFreq modulesdone
Starting HAL daemondone
Starting service kdm<notice>startproc: execve (/usr/bin/kdm) [ /usr/bin/kdm ],
[ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 TERM=linux SHELL=/bin/sh
ROOTFS_FSCK=0 INIT_VERSION=sysvinit-2.86 KDEROOTHOME=/root/.kdm
REDIRECT=/dev/tty1 COLUMNS=124 PATH=/bin:/sbin:/usr/bin:/usr/sbin DO_CONFIRM=
vga=0x317 RUNLEVEL=5
SPLASHCFG=/etc/bootsplash/themes/openSUSE/config/bootsplash-1024x768.cfg PWD=/
LANG=en_US.UTF-8 PREVLEVEL=N LINES=44 QT_SYSTEM_DIR=/usr/share/desktop-data
SHLVL=2 HOME=/ XCURSOR_THEME=DMZ WINDOWMANAGER= SPLASH=yes splash=silent
ROOTFS_BLKDEV=/dev/disk/by-id/ata-ST9160821AS_5MA7Y7TW-part7 _=/sbin/startproc
DAEMON=/usr/bin/kdm ]
done
Starting rpcbind <notice>startproc: execve (/sbin/rpcbind) [ /sbin/rpcbind ], [
CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 SHELL=/bin/sh TERM=linux ROOTFS_FSCK=0
LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=124
PATH=/bin:/sbin:/usr/bin:/usr/sbin vga=0x317 DO_CONFIRM= RUNLEVEL=5 PWD=/
SPLASHCFG=/etc/bootsplash/themes/openSUSE/config/bootsplash-1024x768.cfg
PREVLEVEL=N LINES=44 HOME=/ SHLVL=2 splash=silent SPLASH=yes
ROOTFS_BLKDEV=/dev/disk/by-id/ata-ST9160821AS_5MA7Y7TW-part7 _=/sbin/startproc
DAEMON=/sbin/rpcbind ]
done
Backgrounding to notify hosts...
Not starting NFS client services - no NFS found in /etc/fstab:unused
Loading keymap assuming iso-8859-15 euro
Loading /usr/share/kbd/keymaps/i386/qwerty/us.map.gz
doneLoading compose table latin1.adddone
Start Unicode mode
done<notice>checkproc: /usr/bin/kdm 2549
Starting brld
done
<notice>startproc: execve (/sbin/auditd) [ /sbin/auditd -s disable ], [
CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 SHELL=/bin/sh TERM=linux ROOTFS_FSCK=0
LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=124
PATH=/bin:/sbin:/usr/bin:/usr/sbin vga=0x317 DO_CONFIRM= RUNLEVEL=5 PWD=/
SPLASHCFG=/etc/bootsplash/themes/openSUSE/config/bootsplash-1024x768.cfg
PREVLEVEL=N LINES=44 HOME=/ SHLVL=2 splash=silent SPLASH=yes
ROOTFS_BLKDEV=/dev/disk/by-id/ata-ST9160821AS_5MA7Y7TW-part7 _=/sbin/startproc
DAEMON=/sbin/auditd ]
Starting a11y check
done
<notice>startproc: execve (/usr/sbin/irqbalance) [ /usr/sbin/irqbalance ], [
CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 SHELL=/bin/sh TERM=linux ROOTFS_FSCK=0
LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=124
PATH=/bin:/sbin:/usr/bin:/usr/sbin vga=0x317 DO_CONFIRM= RUNLEVEL=5 PWD=/
SPLASHCFG=/etc/bootsplash/themes/openSUSE/config/bootsplash-1024x768.cfg
PREVLEVEL=N LINES=44 HOME=/ SHLVL=2 splash=silent SPLASH=yes
ROOTFS_BLKDEV=/dev/disk/by-id/ata-ST9160821AS_5MA7Y7TW-part7 _=/sbin/startproc
DAEMON=/usr/sbin/irqbalance ]
<notice>startproc: execve (/usr/sbin/cupsd) [ /usr/sbin/cupsd ], [
CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 SHELL=/bin/sh TERM=linux ROOTFS_FSCK=0
LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=124
PATH=/bin:/sbin:/usr/bin:/usr/sbin vga=0x317 DO_CONFIRM= RUNLEVEL=5 PWD=/
SPLASHCFG=/etc/bootsplash/themes/openSUSE/config/bootsplash-1024x768.cfg
PREVLEVEL=N LINES=44 HOME=/ SHLVL=2 splash=silent SPLASH=yes
ROOTFS_BLKDEV=/dev/disk/by-id/ata-ST9160821AS_5MA7Y7TW-part7 _=/sbin/startproc
DAEMON=/usr/sbin/cupsd ]
Starting irqbalance done
Starting cupsddone
Starting auditd done
Starting Avahi daemon done
Starting java.binfmt_misc done
Starting bluetooth: bluetoothd hid2hci rfcommdone
Starting the NetworkManager<notice>startproc: execve (/usr/sbin/NetworkManager)
[ /usr/sbin/NetworkManager ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3
TERM=linux SHELL=/bin/sh ROOTFS_FSCK=0 OLDPWD=/etc/sysconfig/network
LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=124
PATH=/sbin:/usr/sbin:/bin:/usr/bin:/etc/sysconfig/network/scripts DO_CONFIRM=
vga=0x317 RUNLEVEL=5
SPLASHCFG=/etc/bootsplash/themes/openSUSE/config/bootsplash-1024x768.cfg
PWD=/etc/sysconfig/network PREVLEVEL=N LINES=44 SHLVL=2 HOME=/ SPLASH=yes
splash=silent ROOTFS_BLKDEV=/dev/disk/by-id/ata-ST9160821AS_5MA7Y7TW-part7
_=/sbin/startproc DAEMON=/usr/sbin/NetworkManager ]
done
<notice>checkproc: /usr/sbin/NetworkManager 2956
Starting Name Service Cache Daemon<notice>checkproc: /usr/bin/kdm 2549
<notice>startproc: execve (/usr/sbin/nscd) [ /usr/sbin/nscd ], [
CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 SHELL=/bin/sh TERM=linux ROOTFS_FSCK=0
LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=124
PATH=/bin:/sbin:/usr/bin:/usr/sbin vga=0x317 DO_CONFIRM= RUNLEVEL=5 PWD=/
SPLASHCFG=/etc/bootsplash/themes/openSUSE/config/bootsplash-1024x768.cfg
PREVLEVEL=N LINES=44 HOME=/ SHLVL=2 splash=silent SPLASH=yes
ROOTFS_BLKDEV=/dev/disk/by-id/ata-ST9160821AS_5MA7Y7TW-part7 _=/sbin/startproc
DAEMON=/usr/sbin/nscd ]
done
No active profileunused
Starting mail service (Postfix)done
Starting CRON daemon<notice>startproc: execve (/usr/sbin/cron) [ /usr/sbin/cron
], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 SHELL=/bin/sh TERM=linux
ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1
COLUMNS=124 PATH=/bin:/sbin:/usr/bin:/usr/sbin vga=0x317 DO_CONFIRM= RUNLEVEL=5
PWD=/ SPLASHCFG=/etc/bootsplash/themes/openSUSE/config/bootsplash-1024x768.cfg
PREVLEVEL=N LINES=44 HOME=/ SHLVL=2 splash=silent SPLASH=yes
ROOTFS_BLKDEV=/dev/disk/by-id/ata-ST9160821AS_5MA7Y7TW-part7 _=/sbin/startproc
DAEMON=/usr/sbin/cron ]
done
Starting suse-blinux
done
Starting smartd done
Starting SSH daemon<notice>startproc: execve (/usr/sbin/sshd) [ /usr/sbin/sshd
-o PidFile=/var/run/sshd.init.pid ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3
SHELL=/bin/sh TERM=linux ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86
REDIRECT=/dev/tty1 COLUMNS=124 PATH=/bin:/sbin:/usr/bin:/usr/sbin vga=0x317
DO_CONFIRM= RUNLEVEL=5 PWD=/
SPLASHCFG=/etc/bootsplash/themes/openSUSE/config/bootsplash-1024x768.cfg
PREVLEVEL=N LINES=44 HOME=/ SHLVL=2 splash=silent SPLASH=yes
ROOTFS_BLKDEV=/dev/disk/by-id/ata-ST9160821AS_5MA7Y7TW-part7 _=/sbin/startproc
DAEMON=/usr/sbin/sshd ]
done
Starting Firewall Initialization (phase 2 of 2) done
done
Master Resource Control: runlevel 5 has been reached
Skipped services in runlevel 5: nfs pm-profiler
<notice>killproc: kill(2208,3)
--
[intrepid] laptop freezes on boot unless enter/space button held down
https://bugs.launchpad.net/bugs/294988
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
--
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
