My problem is that I can't access the CUPS web interface on the server from a 
client. The server seems to be OK otherwise. I have installed LAMP server, 
MediaWiki and Tomcat amongst other things, and these are working fine. But when 
I try to access the CUPS web interface I get the error message:
Failed to Connect
Firefox can't establish a connection to the server at 10.0.0.201:631.

Both machines are connected to the network and seems to be working fine
otherwise.

Here is the output from the "nmap 10.0.0.145" command:
Starting Nmap 4.62 ( http://nmap.org ) at 2009-01-11 13:18 CET
Interesting ports on sveinung1 (10.0.0.145):
Not shown: 1712 closed ports
PORT    STATE SERVICE
80/tcp  open  http
111/tcp open  rpcbind
443/tcp open  https
MAC Address: 00:1E:8C:0A:F8:E6 (Asustek Computer)

Nmap done: 1 IP address (1 host up) scanned in 0.172 seconds

Here is the output of ifconfig on the server:
eth0      Link encap:Ethernet  HWaddr 00:1f:d0:0a:c7:34  
          inet addr:10.0.0.201  Bcast:255.255.255.255  Mask:255.255.255.0
          inet6 addr: fe80::21f:d0ff:fe0a:c734/64 Scope:Link
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:8024 errors:0 dropped:2235526125 overruns:0 frame:0
          TX packets:5209 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000 
          RX bytes:611143 (611.1 KB)  TX bytes:755856 (755.8 KB)
          Interrupt:221 Base address:0x6000 

lo        Link encap:Local Loopback  
          inet addr:127.0.0.1  Mask:255.0.0.0
          inet6 addr: ::1/128 Scope:Host
          UP LOOPBACK RUNNING  MTU:16436  Metric:1
          RX packets:1827 errors:0 dropped:0 overruns:0 frame:0
          TX packets:1827 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:0 
          RX bytes:156063 (156.0 KB)  TX bytes:156063 (156.0 KB)

Here is the output of ifconfig on the client:
eth0      Link encap:Ethernet  HWaddr 00:1e:8c:0a:f8:e6  
          inet addr:10.0.0.145  Bcast:255.255.255.255  Mask:255.255.255.0
          inet6 addr: fe80::21e:8cff:fe0a:f8e6/64 Scope:Link
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:24817 errors:0 dropped:0 overruns:0 frame:0
          TX packets:21543 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000 
          RX bytes:5125350 (5.1 MB)  TX bytes:2181559 (2.1 MB)
          Interrupt:18 

lo        Link encap:Local Loopback  
          inet addr:127.0.0.1  Mask:255.0.0.0
          inet6 addr: ::1/128 Scope:Host
          UP LOOPBACK RUNNING  MTU:16436  Metric:1
          RX packets:73 errors:0 dropped:0 overruns:0 frame:0
          TX packets:73 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:0 
          RX bytes:7278 (7.2 KB)  TX bytes:7278 (7.2 KB)

I have tried to reactivate the Listen localhost:631 line, but the error
is the same. I have attached the new output from error_log.


** Attachment added: "error_log"
   http://launchpadlibrarian.net/21101004/error_log

-- 
cups: 127.0.0.1:631 - Address already in use.
https://bugs.launchpad.net/bugs/304393
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.

-- 
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs

Reply via email to