** Description changed: New Ubuntu user, using Feisty 7.04, 2.6.20-16-generic on an Athlon XP 1800+, 512 MB RAM, MSI KT3 Ultra2-R mobo. I'm seeing a frozen mouse pointer on startup, This happens in about one out of every ten startups. The mouse is a Microsoft Intellimouse Optical USB, plugged directly into the system ports. It works fine in XP. Before installing Ubuntu, I ran OpenSUSE 10.2 for about 2 weeks and didn't see this problem. If I login, the pointer remains frozen on the desktop. The mouse is lit however and the buttons work. Clicking the right button brings up the desktop context menu. It just doesn't respond to movement. Physically unplugging and reinserting the mouse will get the thing working I'm working around the problem by switching to a terminal at login and doing a sudo modprobe -r uhci_hcd modprobe uhci_hcd Once I switch back to the GUI, the pointer moves. This is /var/log/dmesg [ 0.000000] Linux version 2.6.20-16-generic (r...@terranova) (gcc version 4.1.2 (Ubuntu 4.1.2-0ubuntu4)) #2 SMP Thu Jun 7 20:19:32 UTC 2007 (Ubuntu 2.6.20-16.29-generic) [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] sanitize start [ 0.000000] sanitize end [ 0.000000] copy_e820_map() start: 0000000000000000 size: 000000000009fc00 end: 000000000009fc00 type: 1 [ 0.000000] copy_e820_map() type is E820_RAM [ 0.000000] copy_e820_map() start: 000000000009fc00 size: 0000000000000400 end: 00000000000a0000 type: 2 [ 0.000000] copy_e820_map() start: 00000000000cc000 size: 0000000000006000 end: 00000000000d2000 type: 2 [ 0.000000] copy_e820_map() start: 00000000000f0000 size: 0000000000010000 end: 0000000000100000 type: 2 [ 0.000000] copy_e820_map() start: 0000000000100000 size: 000000001fef0000 end: 000000001fff0000 type: 1 [ 0.000000] copy_e820_map() type is E820_RAM [ 0.000000] copy_e820_map() start: 000000001fff0000 size: 0000000000008000 end: 000000001fff8000 type: 3 [ 0.000000] copy_e820_map() start: 000000001fff8000 size: 0000000000008000 end: 0000000020000000 type: 4 [ 0.000000] copy_e820_map() start: 00000000fec00000 size: 0000000000001000 end: 00000000fec01000 type: 2 [ 0.000000] copy_e820_map() start: 00000000fee00000 size: 0000000000001000 end: 00000000fee01000 type: 2 [ 0.000000] copy_e820_map() start: 00000000fff80000 size: 0000000000080000 end: 0000000100000000 type: 2 [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) [ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000cc000 - 00000000000d2000 (reserved) [ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 000000001fff0000 (usable) [ 0.000000] BIOS-e820: 000000001fff0000 - 000000001fff8000 (ACPI data) [ 0.000000] BIOS-e820: 000000001fff8000 - 0000000020000000 (ACPI NVS) [ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved) [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) [ 0.000000] BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved) [ 0.000000] 0MB HIGHMEM available. [ 0.000000] 511MB LOWMEM available. [ 0.000000] found SMP MP-table at 000fb940 [ 0.000000] Entering add_active_range(0, 0, 131056) 0 entries of 256 used [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0 -> 4096 [ 0.000000] Normal 4096 -> 131056 [ 0.000000] HighMem 131056 -> 131056 [ 0.000000] early_node_map[1] active PFN ranges [ 0.000000] 0: 0 -> 131056 [ 0.000000] On node 0 totalpages: 131056 [ 0.000000] DMA zone: 32 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 4064 pages, LIFO batch:0 [ 0.000000] Normal zone: 991 pages used for memmap [ 0.000000] Normal zone: 125969 pages, LIFO batch:31 [ 0.000000] HighMem zone: 0 pages used for memmap [ 0.000000] DMI 2.3 present. [ 0.000000] ACPI: RSDP (v000 AMI ) @ 0x000fa8e0 [ 0.000000] ACPI: RSDT (v001 AMIINT VIA_K7 0x00000010 MSFT 0x00000097) @ 0x1fff0000 [ 0.000000] ACPI: FADT (v001 AMIINT VIA_K7 0x00000011 MSFT 0x00000097) @ 0x1fff0030 [ 0.000000] ACPI: MADT (v001 AMIINT VIA_K7 0x00000009 MSFT 0x00000097) @ 0x1fff00c0 [ 0.000000] ACPI: DSDT (v001 VIA VIA_K7 0x00001000 MSFT 0x0100000d) @ 0x00000000 [ 0.000000] ACPI: PM-Timer IO Port: 0x808 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) [ 0.000000] Processor #0 6:6 APIC version 16 [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 2, version 3, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] Allocating PCI resources starting at 30000000 (gap: 20000000:dec00000) [ 0.000000] Detected 1533.544 MHz processor. [ 49.729602] Built 1 zonelists. Total pages: 130033 [ 49.729607] Kernel command line: root=UUID=fc01ae1b-d8e8-4ed7-ae6b-c51b2e3281f3 ro quiet splash [ 49.729824] mapped APIC to ffffd000 (fee00000) [ 49.729827] mapped IOAPIC to ffffc000 (fec00000) [ 49.729832] Enabling fast FPU save and restore... done. [ 49.729835] Enabling unmasked SIMD FPU exception support... done. [ 49.729850] Initializing CPU#0 [ 49.729938] PID hash table entries: 2048 (order: 11, 8192 bytes) [ 49.731558] Console: colour VGA+ 80x25 [ 49.732057] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes) [ 49.732441] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes) [ 49.751676] Memory: 508600k/524224k available (1992k kernel code, 14980k reserved, 900k data, 328k init, 0k highmem) [ 49.751690] virtual kernel memory layout: [ 49.751691] fixmap : 0xfff4e000 - 0xfffff000 ( 708 kB) [ 49.751693] pkmap : 0xff800000 - 0xffc00000 (4096 kB) [ 49.751695] vmalloc : 0xe0800000 - 0xff7fe000 ( 495 MB) [ 49.751696] lowmem : 0xc0000000 - 0xdfff0000 ( 511 MB) [ 49.751698] .init : 0xc03d9000 - 0xc042b000 ( 328 kB) [ 49.751700] .data : 0xc02f2374 - 0xc03d36d4 ( 900 kB) [ 49.751701] .text : 0xc0100000 - 0xc02f2374 (1992 kB) [ 49.751706] Checking if this processor honours the WP bit even in supervisor mode... Ok. [ 49.829830] Calibrating delay using timer specific routine.. 3069.94 BogoMIPS (lpj=6139899) [ 49.829888] Security Framework v1.0.0 initialized [ 49.829898] SELinux: Disabled at boot. [ 49.829921] Mount-cache hash table entries: 512 [ 49.830122] CPU: After generic identify, caps: 0383fbff c1c3fbff 00000000 00000000 00000000 00000000 00000000 [ 49.830135] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) [ 49.830138] CPU: L2 Cache: 256K (64 bytes/line) [ 49.830142] CPU: After all inits, caps: 0383fbff c1c3fbff 00000000 00000420 00000000 00000000 00000000 [ 49.830156] Compat vDSO mapped to ffffe000. [ 49.830163] Remapping vsyscall page to ffffe000 [ 49.830176] Checking 'hlt' instruction... OK. [ 49.845981] SMP alternatives: switching to UP code [ 49.846315] Freeing SMP alternatives: 11k freed [ 49.846655] Early unpacking initramfs... done [ 50.243144] ACPI: Core revision 20060707 [ 50.247148] ACPI: Looking for DSDT in initramfs... file /DSDT.aml not found, using machine DSDT. [ 50.249340] CPU0: AMD Athlon(tm) XP 1800+ stepping 02 [ 50.249391] Total of 1 processors activated (3069.94 BogoMIPS). [ 50.250111] ENABLING IO-APIC IRQs [ 50.250431] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 50.397254] Brought up 1 CPUs [ 50.397615] Booting paravirtualized kernel on bare hardware [ 50.397719] Time: 7:18:53 Date: 07/16/107 [ 50.397768] NET: Registered protocol family 16 [ 50.397910] EISA bus registered [ 50.397916] ACPI: bus type pci registered [ 50.405525] PCI: PCI BIOS revision 2.10 entry at 0xfdaf1, last bus=1 [ 50.405528] PCI: Using configuration type 1 [ 50.405530] Setting up standard PCI resources [ 50.416257] ACPI: Interpreter enabled [ 50.416264] ACPI: Using IOAPIC for interrupt routing [ 50.416846] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 50.416853] PCI: Probing PCI hardware (bus 00) [ 50.418228] PCI quirk: region 0800-087f claimed by vt8235 PM [ 50.418233] PCI quirk: region 0400-040f claimed by vt8235 SMB [ 50.418390] Boot video device is 0000:01:00.0 [ 50.418438] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 50.445366] ACPI: Power Resource [URP1] (off) [ 50.445447] ACPI: Power Resource [URP2] (off) [ 50.445527] ACPI: Power Resource [FDDP] (off) [ 50.445608] ACPI: Power Resource [LPTP] (off) [ 50.447704] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15) [ 50.447974] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *10 11 12 14 15) [ 50.448245] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 7 10 11 12 14 15) [ 50.448519] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 *11 12 14 15) [ 50.448708] Linux Plug and Play Support v0.97 (c) Adam Belay [ 50.448727] pnp: PnP ACPI init [ 50.452456] pnp: PnP ACPI: found 10 devices [ 50.452463] PnPBIOS: Disabled by ACPI PNP [ 50.452553] PCI: Using ACPI for IRQ routing [ 50.452557] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report [ 50.455341] NET: Registered protocol family 8 [ 50.455344] NET: Registered protocol family 20 [ 50.455830] PCI: Bridge: 0000:00:01.0 [ 50.455835] IO window: c000-cfff [ 50.455841] MEM window: dde00000-ddefffff [ 50.455846] PREFETCH window: cdc00000-ddcfffff [ 50.455865] PCI: Setting latency timer of device 0000:00:01.0 to 64 [ 50.455905] NET: Registered protocol family 2 [ 50.481218] IP route cache hash table entries: 4096 (order: 2, 16384 bytes) [ 50.481346] TCP established hash table entries: 16384 (order: 5, 131072 bytes) [ 50.481624] TCP bind hash table entries: 8192 (order: 4, 65536 bytes) [ 50.481765] TCP: Hash tables configured (established 16384 bind 8192) [ 50.481769] TCP reno registered [ 50.493263] checking if image is initramfs... it is [ 51.240807] Freeing initrd memory: 6785k freed [ 51.241482] audit: initializing netlink socket (disabled) [ 51.241502] audit(1187248733.592:1): initialized [ 51.241659] VFS: Disk quotas dquot_6.5.1 [ 51.241684] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 51.241755] io scheduler noop registered [ 51.241759] io scheduler anticipatory registered [ 51.241762] io scheduler deadline registered [ 51.241771] io scheduler cfq registered (default) [ 51.242137] isapnp: Scanning for PnP cards... [ 51.595720] isapnp: No Plug & Play device found [ 51.637468] Real Time Clock Driver v1.12ac [ 51.637535] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled [ 51.637671] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 51.637964] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A [ 51.638841] 00:02: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 51.639289] 00:03: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A [ 51.639711] mice: PS/2 mouse device common for all mice [ 51.640499] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize [ 51.640826] input: Macintosh mouse button emulation as /class/input/input0 [ 51.640872] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 [ 51.640878] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx [ 51.641171] PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1 [ 51.641175] PNP: PS/2 controller doesn't have AUX irq; using default 12 [ 51.641586] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 51.641593] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 51.641764] EISA: Probing bus 0 at eisa.0 [ 51.641810] EISA: Detected 0 cards. [ 51.672042] TCP cubic registered [ 51.672053] NET: Registered protocol family 1 [ 51.672086] Using IPI No-Shortcut mode [ 51.672210] ACPI: (supports S0 S1 S3 S4 S5) [ 51.672266] Magic number: 3:226:319 [ 51.672476] hash matches device tty44 [ 51.673023] Freeing unused kernel memory: 328k freed [ 51.675721] Time: tsc clocksource has been installed. [ 51.684117] input: AT Translated Set 2 keyboard as /class/input/input1 [ 52.970757] Capability LSM initialized [ 53.022403] ACPI: Processor [CPU1] (supports 16 throttling states) [ 53.708317] ieee1394: Initialized config rom entry `ip1394' [ 53.710100] ACPI: PCI Interrupt 0000:00:06.0[A] -> GSI 17 (level, low) -> IRQ 16 [ 53.784251] ohci1394: fw-host0: OHCI-1394 1.0 (PCI): IRQ=[16] MMIO=[dffff800-dfffffff] Max Packet=[2048] IR/IT contexts=[8/8] [ 53.824276] usbcore: registered new interface driver usbfs [ 53.824312] usbcore: registered new interface driver hub [ 53.824346] usbcore: registered new device driver usb [ 53.825654] USB Universal Host Controller Interface driver v3.0 [ 53.825755] ACPI: PCI Interrupt 0000:00:10.0[A] -> GSI 21 (level, low) -> IRQ 17 [ 53.825772] uhci_hcd 0000:00:10.0: UHCI Host Controller [ 53.825983] uhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 1 [ 53.826021] uhci_hcd 0000:00:10.0: irq 17, io base 0x0000d400 [ 53.826191] usb usb1: configuration #1 chosen from 1 choice [ 53.826229] hub 1-0:1.0: USB hub found [ 53.826244] hub 1-0:1.0: 2 ports detected [ 53.866687] Linux Tulip driver version 1.1.14 (December 15, 2004) [ 53.929410] ACPI: PCI Interrupt 0000:00:10.1[B] -> GSI 21 (level, low) -> IRQ 17 [ 53.929428] uhci_hcd 0000:00:10.1: UHCI Host Controller [ 53.929459] uhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 2 [ 53.929489] uhci_hcd 0000:00:10.1: irq 17, io base 0x0000d800 [ 53.929628] usb usb2: configuration #1 chosen from 1 choice [ 53.929661] hub 2-0:1.0: USB hub found [ 53.929675] hub 2-0:1.0: 2 ports detected [ 53.993709] Floppy drive(s): fd0 is 1.44M [ 54.033263] ACPI: PCI Interrupt 0000:00:10.2[C] -> GSI 21 (level, low) -> IRQ 17 [ 54.033281] uhci_hcd 0000:00:10.2: UHCI Host Controller [ 54.033315] uhci_hcd 0000:00:10.2: new USB bus registered, assigned bus number 3 [ 54.033345] uhci_hcd 0000:00:10.2: irq 17, io base 0x0000dc00 [ 54.033491] usb usb3: configuration #1 chosen from 1 choice [ 54.033536] hub 3-0:1.0: USB hub found [ 54.033551] hub 3-0:1.0: 2 ports detected [ 54.045259] FDC 0 is a post-1991 82077 [ 54.138811] ACPI: PCI Interrupt 0000:00:08.0[A] -> GSI 19 (level, low) -> IRQ 18 [ 54.139267] tulip0: MII transceiver #1 config 3100 status 7869 advertising 05e1. [ 54.139945] tulip0: MII transceiver #2 config 1000 status 7849 advertising 05e1. [ 54.140621] tulip0: MII transceiver #3 config 1000 status 7849 advertising 05e1. [ 54.141330] tulip0: MII transceiver #4 config 1000 status 7849 advertising 05e1. [ 54.141695] eth0: ADMtek Comet rev 17 at Port 0xe000, 00:04:5A:82:CE:82, IRQ 18. [ 54.142118] ACPI: PCI Interrupt 0000:00:10.3[D] -> GSI 21 (level, low) -> IRQ 17 [ 54.142133] ehci_hcd 0000:00:10.3: EHCI Host Controller [ 54.142183] ehci_hcd 0000:00:10.3: new USB bus registered, assigned bus number 4 [ 54.142247] ehci_hcd 0000:00:10.3: irq 17, io mem 0xdffff700 [ 54.142256] ehci_hcd 0000:00:10.3: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 [ 54.142396] usb usb4: configuration #1 chosen from 1 choice [ 54.142434] hub 4-0:1.0: USB hub found [ 54.142449] hub 4-0:1.0: 6 ports detected [ 54.168924] usb 1-1: new full speed USB device using uhci_hcd and address 2 [ 54.246597] VP_IDE: IDE controller at PCI slot 0000:00:11.1 [ 54.246628] ACPI: Unable to derive IRQ for device 0000:00:11.1 [ 54.246631] ACPI: PCI Interrupt 0000:00:11.1[A]: no GSI [ 54.246649] VP_IDE: chipset revision 6 [ 54.246652] VP_IDE: not 100% native mode: will probe irqs later [ 54.246665] VP_IDE: VIA vt8235 (rev 00) IDE UDMA133 controller on pci0000:00:11.1 [ 54.246677] ide0: BM-DMA at 0xfc00-0xfc07, BIOS settings: hda:DMA, hdb:pio [ 54.246694] ide1: BM-DMA at 0xfc08-0xfc0f, BIOS settings: hdc:DMA, hdd:DMA [ 54.246707] Probing IDE interface ide0... [ 54.660420] hda: Maxtor 6Y060L0, ATA DISK drive [ 55.060161] ieee1394: Host added: ID:BUS[0-00:1023] GUID[0011060000003753] [ 55.111825] usb 4-1: new high speed USB device using ehci_hcd and address 2 [ 55.244536] usb 4-1: configuration #1 chosen from 1 choice [ 55.244688] hub 4-1:1.0: USB hub found [ 55.244782] hub 4-1:1.0: 4 ports detected [ 55.331836] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 [ 55.342810] Probing IDE interface ide1... [ 55.902918] hub 4-0:1.0: over-current change on port 5 [ 56.006799] hub 4-0:1.0: over-current change on port 6 [ 56.206659] hdc: LITE-ON DVDRW SOHW-1693S, ATAPI CD/DVD-ROM drive [ 56.350396] usb 1-2: new full speed USB device using uhci_hcd and address 3 [ 56.504361] usb 1-2: configuration #1 chosen from 1 choice [ 56.506341] hub 1-2:1.0: USB hub found [ 56.509254] hub 1-2:1.0: 3 ports detected [ 56.857817] usb 2-1: new full speed USB device using uhci_hcd and address 2 [ 56.989758] hdd: HL-DT-ST DVDRAM GMA-4020B, ATAPI CD/DVD-ROM drive [ 57.049035] usb 2-1: configuration #1 chosen from 1 choice [ 57.050151] ide1 at 0x170-0x177,0x376 on irq 15 [ 57.066920] SCSI subsystem initialized [ 57.073888] libata version 2.20 loaded. [ 57.096292] hda: max request size: 128KiB [ 57.113028] hda: 120103200 sectors (61492 MB) w/2048KiB Cache, CHS=65535/16/63, UDMA(133) [ 57.116512] hda: cache flushes supported [ 57.116590] hda: hda1 hda2 < hda5 hda6 hda7 > [ 57.176759] hdc: ATAPI 48X DVD-ROM DVD-R CD-R/RW drive, 2048kB Cache, UDMA(66) [ 57.176774] Uniform CD-ROM driver Revision: 3.20 [ 57.195178] hdd: ATAPI 32X DVD-ROM DVD-R-RAM CD-R/RW drive, 1312kB Cache, UDMA(33) [ 57.289340] usb 2-2: new low speed USB device using uhci_hcd and address 3 [ 57.472077] usb 2-2: configuration #1 chosen from 1 choice [ 57.556992] Attempting manual resume [ 57.556999] swsusp: Resume From Partition 3:6 [ 57.557001] PM: Checking swsusp image. [ 57.557263] PM: Resume from disk failed. [ 57.587590] kjournald starting. Commit interval 5 seconds [ 57.587610] EXT3-fs: mounted filesystem with ordered data mode. [ 57.682640] usb 1-2.2: new low speed USB device using uhci_hcd and address 4 [ 60.750420] usb 1-2.2: device descriptor read/64, error -110 [ 61.461595] usb 1-2.2: configuration #1 chosen from 1 choice [ 61.466457] usbcore: registered new interface driver hiddev [ 61.534521] input: Microsoft Microsoft 3-Button Mouse with IntelliEye(TM) as /class/input/input2 [ 61.534549] input: USB HID v1.10 Mouse [Microsoft Microsoft 3-Button Mouse with IntelliEye(TM)] on usb-0000:00:10.1-2 [ 62.227477] hiddev96: USB HID v1.10 Device [American Power Conversion Back-UPS BR 800 FW:9.o2 .D USB FW:o2 ] on usb-0000:00:10.0-2.2 [ 62.227509] usbcore: registered new interface driver usbhid [ 62.227514] drivers/usb/input/hid-core.c: v2.6:USB HID core driver [ 70.796382] NET: Registered protocol family 17 [ 71.808842] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 71.818988] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 72.115115] gameport: EMU10K1 is pci0000:00:07.1/gameport0, io 0xec00, speed 1217kHz [ 72.152095] Linux video capture interface: v2.00 [ 72.234016] 0000:00:08.0: tulip_stop_rxtx() failed (CSR5 0xfc664010 CSR6 0xff972113) [ 72.234030] eth0: Setting full-duplex based on MII#1 link partner capability of 41e1. [ 72.311497] cx2388x v4l2 driver version 0.0.6 loaded [ 72.311584] ACPI: PCI Interrupt 0000:00:0a.0[A] -> GSI 17 (level, low) -> IRQ 16 [ 72.311658] CORE cx88[0]: subsystem: 1002:00f8, board: ATI TV Wonder Pro [card=4,autodetected] [ 72.311663] TV tuner 44 at 0x1fe, Radio tuner -1 at 0x1fe [ 72.462354] cx88[0]/0: found at 0000:00:0a.0, rev: 5, irq: 16, latency: 32, mmio: 0xde000000 [ 72.478450] Linux agpgart interface v0.102 (c) Dave Jones [ 72.533015] tuner 0-0043: chip found @ 0x86 (cx88[0]) [ 72.533072] tda9887 0-0043: tda988[5/6/7] found @ 0x43 (tuner) [ 72.535854] tuner 0-0060: All bytes are equal. It is not a TEA5767 [ 72.535858] tuner 0-0060: chip found @ 0xc0 (cx88[0]) [ 72.535884] tuner 0-0060: type set to 44 (Philips 4 in 1 (ATI TV Wonder Pro/Conexant)) [ 72.535889] tuner 0-0060: type set to 44 (Philips 4 in 1 (ATI TV Wonder Pro/Conexant)) [ 72.552002] cx88[0]/0: registered device video0 [v4l2] [ 72.552049] cx88[0]/0: registered device vbi0 [ 72.571200] agpgart: Detected VIA KT266/KY266x/KT333 chipset [ 72.580795] agpgart: AGP aperture is 128M @ 0xe0000000 [ 72.600124] irda_init() [ 72.600156] NET: Registered protocol family 23 [ 72.852397] parport: PnPBIOS parport detected. [ 72.852511] parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,EPP,ECP,DMA] [ 72.862122] input: PC Speaker as /class/input/input3 [ 73.638828] drivers/usb/class/usblp.c: usblp0: USB Bidirectional printer dev 2 if 0 alt 0 proto 2 vid 0x03F0 pid 0xC302 [ 73.638859] usbcore: registered new interface driver usblp [ 73.638864] drivers/usb/class/usblp.c: v0.13: USB Printer Device Class driver [ 73.639606] usbcore: registered new interface driver xpad [ 73.639613] drivers/usb/input/xpad.c: driver for Xbox controllers v0.1.6 [ 73.793292] ACPI: PCI Interrupt 0000:00:07.0[A] -> GSI 18 (level, low) -> IRQ 19 [ 74.268221] fuse init (API version 7.8) [ 74.301290] lp0: using parport0 (interrupt-driven). [ 74.374621] Adding 1003988k swap on /dev/disk/by-uuid/05354f85-9dae-4946-8229-9c8071beb89e. Priority:-1 extents:1 across:1003988k [ 74.526746] EXT3 FS on hda7, internal journal [ 74.732340] NET: Registered protocol family 10 [ 74.732487] lo: Disabled Privacy Extensions [ 74.952435] NTFS driver 2.1.28 [Flags: R/O MODULE]. [ 75.027027] NTFS volume version 3.1. [ 75.067416] NTFS volume version 3.1. + [lspci] + 00:00.0 Host bridge [0600]: VIA Technologies, Inc. VT8366/A/7 [Apollo KT266/A/333] [1106:3099] + Subsystem: VIA Technologies, Inc. Unknown device [1106:0000] + 01:00.0 VGA compatible controller [0300]: ATI Technologies Inc Radeon RV100 QY [Radeon 7000/VE] [1002:5159] (prog-if 00 [VGA]) + Subsystem: ATI Technologies Inc Radeon 7000/Radeon VE [1002:000a]
-- frozen mouse pointer at login https://bugs.launchpad.net/bugs/132909 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
