Hi Dan, The Wifi started on HP Compaq nc6000!!! Great! This evening I will test the IBM TPs
[67953.153090] phy0: hwaddr 00:0e:6a:cc:1c:a3, isl3890 [67957.286578] firmware: requesting isl3886 [67957.424874] ADDRCONF(NETDEV_UP): wlan0: link is not ready [80321.755166] wlan0: authenticate with AP 00:0d:54:a0:8c:f6 [80321.760375] wlan0: authenticated [80321.760390] wlan0: associate with AP 00:0d:54:a0:8c:f6 [80321.762874] wlan0: RX AssocResp from 00:0d:54:a0:8c:f6 (capab=0x431 status=0 aid=12) [80321.762887] wlan0: associated [80321.770235] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready [80331.872047] wlan0: no IPv6 routers present Bye Adolfo 2009/2/6 Adolfo Di Dio <adolfo.di...@gmail.com> > Hi Dan, > Thank you for your reply. I confirm the problem. When I insert the card on > a new installed Ubuntu 8.10 on HP Compaq nc6000 I get this: > > [67950.004066] pccard: CardBus card inserted into slot 0 > [67950.004130] PCI: 0000:03:00.0 reg 10 32bit mmio: [0, 1fff] > [67950.004206] pci 0000:03:00.0: supports D1 > [67950.004212] pci 0000:03:00.0: supports D2 > [67950.004220] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold > [67950.004231] pci 0000:03:00.0: PME# disabled > [67950.747959] prism54pci 0000:03:00.0: enabling device (0000 -> 0002) > [67950.750279] prism54pci 0000:03:00.0: PCI INT A -> Link[C0C4] -> GSI 10 > (level, low) -> IRQ 10 > [67950.750310] prism54pci 0000:03:00.0: setting latency timer to 64 > [67950.803061] firmware: requesting isl3886 > [67950.830829] p54: LM86 firmware > [67950.830836] p54: FW rev 2.7.0.0 - Softmac protocol 4.1 > [67951.996055] p54: unknown eeprom code : 0x1 > [67951.996068] p54: unknown eeprom code : 0x3 > [67951.996075] p54: unknown eeprom code : 0x1905 > [67951.996087] p54: unknown eeprom code : 0x1007 > [67951.996093] p54: unknown eeprom code : 0x1008 > [67951.996099] p54: unknown eeprom code : 0x1100 > [67952.006753] phy0: Selected rate control algorithm 'pid' > [67953.153090] phy0: hwaddr 00:0e:6a:cc:1c:a3, isl3890 > [67957.286578] firmware: requesting isl3886 > [67957.424874] ADDRCONF(NETDEV_UP): wlan0: link is not ready > $ uname -a > Linux tux 2.6.27-11-generic #1 SMP Thu Jan 29 19:24:39 UTC 2009 i686 > GNU/Linux > > > > I have *six* 3CRWE154G72 working cards that I tried on IBM TP 600E, IBM > TP R30, IBM R40 and HP Compaq nc6000. > > Thank you in advance for any help > > Regards > > Adolfo > > > 2009/2/6 Dan Trevino <dantrev...@gmail.com> > > Thank you for taking the time to report this bug and helping to make >> Ubuntu better. You reported this bug a while ago and there hasn't been >> any activity in it recently. We were wondering if this is still an issue >> for you. Can you try with the latest Ubuntu release? Thanks in advance. >> >> ** Changed in: ubuntu >> Status: New => Incomplete >> >> -- >> Wifi 3CRWE154G72 driver prism54pci does not work with Ubuntu 8.10 beta >> https://bugs.launchpad.net/bugs/287408 >> You received this bug notification because you are a direct subscriber >> of the bug. >> > > -- Wifi 3CRWE154G72 driver prism54pci does not work with Ubuntu 8.10 beta https://bugs.launchpad.net/bugs/287408 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
