Ok, you are right. I was unpatient. After a 2 minutes delay, the system finally starts, using the new kernel.
I took my Camera and made a Picture of the Kernel Messages before it's falling asleep: Begin: Mounting root file system... ... Begin: Running /scripts/local-top [17179572.092000] ICH7: IDE controller at PCI slot 0000:00:1f.1 [17179572.092000] ACPI: PCI Interrupt 000:00:1f.1[C] -> GSI 16 (level, low) -> IRQ 169 [17179572.092000] ICH7: chipset revision 2 [17179572.092000] ICH7: not 100% native mode: will probe irqs later [17179572.096000] ide0: BM-DMA at 0x1880-0x1887, BIOS settings: hda:DMA, hdb:pio [17179574.592000] hda: HL-DT-STCD-RW/DVD DRIVE GCC-4246N, ATAPI CD/DVD-ROM drive [17179575.688000] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 [17179575.700000] hda: ATAPI 24X DVD-ROM CD-R/RW drive, 2048kB Cache, UDMA(33) [17179575.704000] Uniform CD-ROM driver Revision: 3.20 [17179575.932000] SCSI subsystem initialized [17179575.932000] ACPI: bus type scsi registered [17179575.936000] ACPI: PCI Interrupt 000:00:1f.2[B] -> GSI 16 (level, low) -> IRQ 169 *** zzZZzzZZzz *** [17179610.272000] ahci 000:00:1f.2: AHCI 0001.0100 32 slots 4 ports 1.5 Gbps 0x1 impl SATA mode [17179610.272000] ahci 000:00:1f.2: flags: 64bit ncq pm led clo pio slum part [17179610.272000] ata1: SATA max UDMA/133 cmd 0xE0868500 ctl 0x0 bmdma 0x0 irq 66 [17179610.272000] ata2: SATA max UDMA/133 cmd 0xE0868580 ctl 0x0 bmdma 0x0 irq 66 [17179610.272000] ata3: SATA max UDMA/133 cmd 0xE0868600 ctl 0x0 bmdma 0x0 irq 66 [17179610.276000] ata4: SATA max UDMA/133 cmd 0xE0868680 ctl 0x0 bmdma 0x0 irq 66 [17179610.520000] ata1: dev 0 ATA-7, max UDMA/100, 117210240 sectors: LBA48 [17179610.532000] ata1: dev 0 configured for UDMA/100 ... I hope this helps! If you need any further details, please feel free to ask me anytime. Thank you very much for your help!! ** Description changed: Since Kernel revision 2.6.15-25 the boot sequence hangs after a few seconds on my Thinkpad T60. Kernel 2.6.15-23 works fine. Unfortunately, this is before any Kernellog or Syslog is beeing generated. On the last lines it is saying something about IRQ 169 and hangs. What information can I provide you to solve this problem? + + I took my Camera and made a Picture of the Kernel Messages before it's + falling asleep: + + Begin: Mounting root file system... ... + Begin: Running /scripts/local-top + [17179572.092000] ICH7: IDE controller at PCI slot 0000:00:1f.1 + [17179572.092000] ACPI: PCI Interrupt 000:00:1f.1[C] -> GSI 16 (level, low) -> IRQ 169 + [17179572.092000] ICH7: chipset revision 2 + [17179572.092000] ICH7: not 100% native mode: will probe irqs later + [17179572.096000] ide0: BM-DMA at 0x1880-0x1887, BIOS settings: hda:DMA, hdb:pio + [17179574.592000] hda: HL-DT-STCD-RW/DVD DRIVE GCC-4246N, ATAPI CD/DVD-ROM drive + [17179575.688000] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 + [17179575.700000] hda: ATAPI 24X DVD-ROM CD-R/RW drive, 2048kB Cache, UDMA(33) + [17179575.704000] Uniform CD-ROM driver Revision: 3.20 + [17179575.932000] SCSI subsystem initialized + [17179575.932000] ACPI: bus type scsi registered + [17179575.936000] ACPI: PCI Interrupt 000:00:1f.2[B] -> GSI 16 (level, low) -> IRQ 169 + + *** zzZZzzZZzz *** + + [17179610.272000] ahci 000:00:1f.2: AHCI 0001.0100 32 slots 4 ports 1.5 Gbps 0x1 impl SATA mode + [17179610.272000] ahci 000:00:1f.2: flags: 64bit ncq pm led clo pio slum part + [17179610.272000] ata1: SATA max UDMA/133 cmd 0xE0868500 ctl 0x0 bmdma 0x0 irq 66 + [17179610.272000] ata2: SATA max UDMA/133 cmd 0xE0868580 ctl 0x0 bmdma 0x0 irq 66 + [17179610.272000] ata3: SATA max UDMA/133 cmd 0xE0868600 ctl 0x0 bmdma 0x0 irq 66 + [17179610.276000] ata4: SATA max UDMA/133 cmd 0xE0868680 ctl 0x0 bmdma 0x0 irq 66 + [17179610.520000] ata1: dev 0 ATA-7, max UDMA/100, 117210240 sectors: LBA48 + [17179610.532000] ata1: dev 0 configured for UDMA/100 + ... -- Kernel hangs during boot sequence since Revision 2.6.15-25 on Thinkpad T60 https://launchpad.net/bugs/52752 -- ubuntu-bugs mailing list [email protected] https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
