** Description changed:
I own an LG Flatron L1715S which is more than capable of running at all
resolutions up to 1280x1024. Ubuntu never detected the right resolution though
and always stuck me with 800x600.. I never thought this was a real issue until
screens and graphics was completely removed from intrepid and the repos..
Now that I cant manually configure the monitor or graphics card I am stuck
with the crappy auto detection. When I did use screens and graphics I used to
choose generic tft monitor with 1280x1024 and the vesa driver... I hope that
the auto detection will be fixed in Jaunty.
- Heres the lspci -vvnn :
+ [lspci -vvnn]
- tre...@tretle-desktop:~$ lspci -vvnn
00:00.0 RAM memory [0500]: nVidia Corporation MCP55 Memory Controller
[10de:0369] (rev a1)
Subsystem: Giga-byte Technology Device [1458:5001]
- Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
- Latency: 0
- Capabilities: <access denied>
-
- 00:01.0 ISA bridge [0601]: nVidia Corporation MCP55 LPC Bridge [10de:0360]
(rev a2)
- Subsystem: Giga-byte Technology Device [1458:0c11]
- Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
- Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
- Latency: 0
- Kernel modules: ck804xrom
-
- 00:01.1 SMBus [0c05]: nVidia Corporation MCP55 SMBus [10de:0368] (rev a2)
- Subsystem: Giga-byte Technology Device [1458:0c11]
- Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
- Interrupt: pin A routed to IRQ 11
- Region 0: I/O ports at e800 [size=64]
- Region 4: I/O ports at 1c00 [size=64]
- Region 5: I/O ports at 1c80 [size=64]
- Capabilities: <access denied>
- Kernel driver in use: nForce2_smbus
- Kernel modules: i2c-nforce2
-
- 00:02.0 USB Controller [0c03]: nVidia Corporation MCP55 USB Controller
[10de:036c] (rev a1) (prog-if 10)
- Subsystem: Giga-byte Technology Device [1458:5004]
- Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
- Latency: 0 (750ns min, 250ns max)
- Interrupt: pin A routed to IRQ 23
- Region 0: Memory at fb105000 (32-bit, non-prefetchable) [size=4K]
- Capabilities: <access denied>
- Kernel driver in use: ohci_hcd
- Kernel modules: ohci-hcd
-
- 00:02.1 USB Controller [0c03]: nVidia Corporation MCP55 USB Controller
[10de:036d] (rev a2) (prog-if 20)
- Subsystem: Giga-byte Technology Device [1458:5004]
- Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
- Latency: 0 (750ns min, 250ns max)
- Interrupt: pin B routed to IRQ 22
- Region 0: Memory at fb106000 (32-bit, non-prefetchable) [size=256]
- Capabilities: <access denied>
- Kernel driver in use: ehci_hcd
- Kernel modules: ehci-hcd
-
- 00:04.0 IDE interface [0101]: nVidia Corporation MCP55 IDE [10de:036e] (rev
a1) (prog-if 8a [Master SecP PriP])
- Subsystem: Device [f458:5002]
- Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
- Latency: 0 (750ns min, 250ns max)
- Region 0: [virtual] Memory at 000001f0 (32-bit, non-prefetchable)
[disabled] [size=8]
- Region 1: [virtual] Memory at 000003f0 (type 3, non-prefetchable)
[disabled] [size=1]
- Region 2: [virtual] Memory at 00000170 (32-bit, non-prefetchable)
[disabled] [size=8]
- Region 3: [virtual] Memory at 00000370 (type 3, non-prefetchable)
[disabled] [size=1]
- Region 4: I/O ports at f000 [size=16]
- Capabilities: <access denied>
- Kernel driver in use: pata_amd
- Kernel modules: pata_acpi, ata_generic, pata_amd
-
- 00:05.0 IDE interface [0101]: nVidia Corporation MCP55 SATA Controller
[10de:037f] (rev a2) (prog-if 85 [Master SecO PriO])
- Subsystem: Giga-byte Technology Device [1458:b002]
- Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
- Latency: 0 (750ns min, 250ns max)
- Interrupt: pin A routed to IRQ 20
- Region 0: I/O ports at a800 [size=8]
- Region 1: I/O ports at ac00 [size=4]
- Region 2: I/O ports at b000 [size=8]
- Region 3: I/O ports at b400 [size=4]
- Region 4: I/O ports at b800 [size=16]
- Region 5: Memory at fb10a000 (32-bit, non-prefetchable) [size=4K]
- Capabilities: <access denied>
- Kernel driver in use: sata_nv
- Kernel modules: pata_acpi, sata_nv, ata_generic
-
- 00:05.1 IDE interface [0101]: nVidia Corporation MCP55 SATA Controller
[10de:037f] (rev a2) (prog-if 85 [Master SecO PriO])
- Subsystem: Giga-byte Technology Device [1458:b002]
- Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
- Latency: 0 (750ns min, 250ns max)
- Interrupt: pin B routed to IRQ 23
- Region 0: I/O ports at bc00 [size=8]
- Region 1: I/O ports at c000 [size=4]
- Region 2: I/O ports at c400 [size=8]
- Region 3: I/O ports at c800 [size=4]
- Region 4: I/O ports at cc00 [size=16]
- Region 5: Memory at fb10b000 (32-bit, non-prefetchable) [size=4K]
- Capabilities: <access denied>
- Kernel driver in use: sata_nv
- Kernel modules: pata_acpi, sata_nv, ata_generic
-
- 00:05.2 IDE interface [0101]: nVidia Corporation MCP55 SATA Controller
[10de:037f] (rev a2) (prog-if 85 [Master SecO PriO])
- Subsystem: Giga-byte Technology Device [1458:b002]
- Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
- Latency: 0 (750ns min, 250ns max)
- Interrupt: pin C routed to IRQ 22
- Region 0: I/O ports at d000 [size=8]
- Region 1: I/O ports at d400 [size=4]
- Region 2: I/O ports at d800 [size=8]
- Region 3: I/O ports at dc00 [size=4]
- Region 4: I/O ports at e000 [size=16]
- Region 5: Memory at fb104000 (32-bit, non-prefetchable) [size=4K]
- Capabilities: <access denied>
- Kernel driver in use: sata_nv
- Kernel modules: pata_acpi, sata_nv, ata_generic
-
- 00:06.0 PCI bridge [0604]: nVidia Corporation MCP55 PCI bridge [10de:0370]
(rev a2) (prog-if 01)
- Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
- Latency: 0
- Bus: primary=00, secondary=01, subordinate=01, sec-latency=32
- Memory behind bridge: fb000000-fb0fffff
- Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- <SERR- <PERR-
- BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
- PriDiscTmr- SecDiscTmr+ DiscTmrStat- DiscTmrSERREn+
- Capabilities: <access denied>
-
- 00:06.1 Audio device [0403]: nVidia Corporation MCP55 High Definition Audio
[10de:0371] (rev a2)
- Subsystem: Giga-byte Technology Device [1458:a002]
- Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
- Latency: 0 (500ns min, 1250ns max)
- Interrupt: pin B routed to IRQ 21
- Region 0: Memory at fb100000 (32-bit, non-prefetchable) [size=16K]
- Capabilities: <access denied>
- Kernel driver in use: HDA Intel
- Kernel modules: snd-hda-intel
-
- 00:08.0 Bridge [0680]: nVidia Corporation MCP55 Ethernet [10de:0373] (rev a2)
- Subsystem: Giga-byte Technology Device [1458:e000]
- Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
- Latency: 0 (250ns min, 5000ns max)
- Interrupt: pin A routed to IRQ 2302
- Region 0: Memory at fb107000 (32-bit, non-prefetchable) [size=4K]
- Region 1: I/O ports at e400 [size=8]
- Region 2: Memory at fb108000 (32-bit, non-prefetchable) [size=256]
- Region 3: Memory at fb109000 (32-bit, non-prefetchable) [size=16]
- Capabilities: <access denied>
- Kernel driver in use: forcedeth
- Kernel modules: forcedeth, isp1760
-
- 00:0f.0 PCI bridge [0604]: nVidia Corporation MCP55 PCI Express bridge
[10de:0377] (rev a2)
- Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
- Latency: 0, Cache Line Size: 32 bytes
- Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
- I/O behind bridge: 00009000-00009fff
- Memory behind bridge: f8000000-faffffff
- Prefetchable memory behind bridge: 00000000e0000000-00000000efffffff
- Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- <SERR- <PERR-
- BridgeCtl: Parity- SERR- NoISA- VGA+ MAbort- >Reset- FastB2B-
- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
- Capabilities: <access denied>
- Kernel driver in use: pcieport-driver
- Kernel modules: shpchp
-
- 00:18.0 Host bridge [0600]: Advanced Micro Devices [AMD] K8
[Athlon64/Opteron] HyperTransport Technology Configuration [1022:1100]
- Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
- Capabilities: <access denied>
-
- 00:18.1 Host bridge [0600]: Advanced Micro Devices [AMD] K8
[Athlon64/Opteron] Address Map [1022:1101]
- Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
-
- 00:18.2 Host bridge [0600]: Advanced Micro Devices [AMD] K8
[Athlon64/Opteron] DRAM Controller [1022:1102]
- Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
-
- 00:18.3 Host bridge [0600]: Advanced Micro Devices [AMD] K8
[Athlon64/Opteron] Miscellaneous Control [1022:1103]
- Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
- Capabilities: <access denied>
- Kernel driver in use: k8temp
- Kernel modules: k8temp
-
- 01:0a.0 FireWire (IEEE 1394) [0c00]: Texas Instruments TSB43AB23
IEEE-1394a-2000 Controller (PHY/Link) [104c:8024] (prog-if 10)
- Subsystem: Giga-byte Technology Device [1458:1000]
- Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
- Latency: 32 (750ns min, 1000ns max), Cache Line Size: 32 bytes
- Interrupt: pin A routed to IRQ 18
- Region 0: Memory at fb004000 (32-bit, non-prefetchable) [size=2K]
- Region 1: Memory at fb000000 (32-bit, non-prefetchable) [size=16K]
- Capabilities: <access denied>
- Kernel driver in use: ohci1394
- Kernel modules: ohci1394
-
02:00.0 VGA compatible controller [0300]: nVidia Corporation G70 [GeForce
7600 GS] [10de:0392] (rev a1)
Subsystem: XFX Pine Group Inc. Device [1682:2221]
- Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
- Latency: 0, Cache Line Size: 32 bytes
- Interrupt: pin A routed to IRQ 16
- Region 0: Memory at f8000000 (32-bit, non-prefetchable) [size=16M]
- Region 1: Memory at e0000000 (64-bit, prefetchable) [size=256M]
- Region 3: Memory at f9000000 (64-bit, non-prefetchable) [size=16M]
- Region 5: I/O ports at 9000 [size=128]
- [virtual] Expansion ROM at fa000000 [disabled] [size=128K]
- Capabilities: <access denied>
Kernel driver in use: nvidia
Kernel modules: nvidia, nvidiafb
--
lg flatron li715s
https://bugs.launchpad.net/bugs/315357
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
--
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
