Public bug reported:

I have connected my externel HDD in Ubuntu 9.04 jaunty over firewire
now, and turned it on, the systemlog displayes the following :

2009-04-15 19:39:59     gst     kernel  [25572.676868] scsi 11:0:0:0: 
Direct-Access-RBC WDC WD20 00JB-00DUA0           PQ: 0 ANSI: 4
2009-04-15 19:39:59     gst     kernel  [25572.734805] sd 11:0:0:0: [sde] 
390721968 512-byte hardware sectors: (200 GB/186 GiB)
2009-04-15 19:39:59     gst     kernel  [25572.763669] sd 11:0:0:0: [sde] Write 
Protect is off
2009-04-15 19:39:59     gst     kernel  [25572.763672] sd 11:0:0:0: [sde] Mode 
Sense: 11 00 00 00
2009-04-15 19:39:59     gst     kernel  [25572.821708] sd 11:0:0:0: [sde] Write 
cache: enabled, read cache: enabled, doesn't support DPO or FUA
2009-04-15 19:39:59     gst     kernel  [25572.879734] sd 11:0:0:0: [sde] 
390721968 512-byte hardware sectors: (200 GB/186 GiB)
2009-04-15 19:39:59     gst     kernel  [25572.908593] sd 11:0:0:0: [sde] Write 
Protect is off
2009-04-15 19:39:59     gst     kernel  [25572.908596] sd 11:0:0:0: [sde] Mode 
Sense: 11 00 00 00
2009-04-15 19:39:59     gst     kernel  [25572.966623] sd 11:0:0:0: [sde] Write 
cache: enabled, read cache: enabled, doesn't support DPO or FUA
2009-04-15 19:39:59     gst     kernel  [25572.966627]  sde: sde1

Even if it displays sde1 there , it comes to no mount or appearing in KDE's 
Device Manager.
Even a manaul mount will fail :

i used fdisk to find information about this hdd but this fails too :

Platte /dev/sde: 200.0 GByte, 200049647616 Byte
255 Köpfe, 63 Sektoren/Spuren, 24321 Zylinder  
Einheiten = Zylinder von 16065 × 512 = 8225280 Bytes
Disk identifier: 0x774f0373                         

Festplatte /dev/sde enthält keine gültige Partitionstabelle (HDD does
not contain a valid Partitionrecord)

It does not show me a filesystem.

The HDD is formatted with the NTFS File system.

a manual mount will fail with the following error :

sp...@gst:~$ sudo mount /dev/sde1 test
[sudo] password for spook:            
mount: Sie müssen den Dateisystemtyp angeben  
(You have to specifey the filesstem type)

When i connect the same box over USB all works.

This worked correctly under Hardy 8.04 last time.

Kernel is : Linux gst 2.6.28-11-generic #41-Ubuntu SMP Wed Apr 8 04:38:53 UTC 
2009 i686 GNU/Linux
Description:    Ubuntu 9.04
Release:        9.04

including all fixes until today.

** Affects: ubuntu
     Importance: Undecided
         Status: New

-- 
extrenel Firewire HDD not reconized/mounted
https://bugs.launchpad.net/bugs/361889
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.

-- 
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs

Reply via email to