Public bug reported: Binary package hint: xorg
Every time my machine is idle for times ranging from 3-40 minutes X crashes hard and I must hit reset to reboot. It never did this in Intrepid only with Jaunty. At first I thought it was because of Ext4 drive formating, so I re-installed with ext3. Still does it. I checked to see if it's the drivers for my ati radeon 1650x card, but when I switched to the proprietary drivers, it destroyed my install and I had to reinstall again. Now I've done a fresh install and it still does it whether compiz is enabled or not, and regardless of what applications are running. I filed a bug report via report a problem, but I couldn't include details so I'm filing one here to explain what I've tried. I've searched and searched and found similar complaints, but the all relate to hardware that I either don't have, or are specific to an application. Dmesg and apt-cache are pasted below, let me know what other out puts you guys need. Apt-cache returns: xorg: Installed: 1:7.4~5ubuntu18 Candidate: 1:7.4~5ubuntu18 Version table: *** 1:7.4~5ubuntu18 0 500 http://mirror.its.uidaho.edu jaunty/main Packages 100 /var/lib/dpkg/status Dmesg returns: [ 0.644116] hpet0: 4 comparators, 64-bit 14.318180 MHz counter [ 0.648077] AppArmor: AppArmor Filesystem Enabled [ 0.652009] Switched to high resolution mode on CPU 0 [ 0.652804] Switched to high resolution mode on CPU 1 [ 0.660036] pnp: PnP ACPI init [ 0.660055] ACPI: bus type pnp registered [ 0.663931] pnp: PnP ACPI: found 14 devices [ 0.663934] ACPI: ACPI bus type pnp unregistered [ 0.663945] system 00:01: ioport range 0x4d0-0x4d1 has been reserved [ 0.663948] system 00:01: ioport range 0x290-0x29f has been reserved [ 0.663951] system 00:01: ioport range 0x800-0x87f has been reserved [ 0.663954] system 00:01: ioport range 0x290-0x294 has been reserved [ 0.663956] system 00:01: ioport range 0x880-0x88f has been reserved [ 0.663965] system 00:0a: ioport range 0x400-0x4bf could not be reserved [ 0.663972] system 00:0b: iomem range 0xd0000000-0xdfffffff has been reserved [ 0.663978] system 00:0c: iomem range 0xd2000-0xd3fff has been reserved [ 0.663981] system 00:0c: iomem range 0xf0000-0xf7fff could not be reserved [ 0.663984] system 00:0c: iomem range 0xf8000-0xfbfff could not be reserved [ 0.663987] system 00:0c: iomem range 0xfc000-0xfffff could not be reserved [ 0.663990] system 00:0c: iomem range 0xcfee0000-0xcfefffff could not be reserved [ 0.663992] system 00:0c: iomem range 0x0-0x9ffff could not be reserved [ 0.663995] system 00:0c: iomem range 0x100000-0xcfedffff could not be reserved [ 0.663998] system 00:0c: iomem range 0xfec00000-0xfec00fff has been reserved [ 0.664007] system 00:0c: iomem range 0xfed10000-0xfed1dfff has been reserved [ 0.664010] system 00:0c: iomem range 0xfed20000-0xfed8ffff has been reserved [ 0.664012] system 00:0c: iomem range 0xfee00000-0xfee00fff has been reserved [ 0.664015] system 00:0c: iomem range 0xffb00000-0xffb7ffff has been reserved [ 0.664018] system 00:0c: iomem range 0xfff00000-0xffffffff has been reserved [ 0.664021] system 00:0c: iomem range 0xe0000-0xeffff has been reserved [ 0.668743] pci 0000:00:01.0: PCI bridge, secondary bus 0000:01 [ 0.668747] pci 0000:00:01.0: IO window: 0xb000-0xbfff [ 0.668751] pci 0000:00:01.0: MEM window: 0xf0000000-0xf1ffffff [ 0.668755] pci 0000:00:01.0: PREFETCH window: 0x000000e0000000-0x000000efffffff [ 0.668759] pci 0000:00:1c.0: PCI bridge, secondary bus 0000:02 [ 0.668762] pci 0000:00:1c.0: IO window: 0xa000-0xafff [ 0.668767] pci 0000:00:1c.0: MEM window: disabled [ 0.668771] pci 0000:00:1c.0: PREFETCH window: disabled [ 0.668776] pci 0000:00:1c.4: PCI bridge, secondary bus 0000:03 [ 0.668779] pci 0000:00:1c.4: IO window: 0xc000-0xcfff [ 0.668784] pci 0000:00:1c.4: MEM window: 0xf2000000-0xf2ffffff [ 0.668788] pci 0000:00:1c.4: PREFETCH window: disabled [ 0.668794] pci 0000:00:1c.5: PCI bridge, secondary bus 0000:04 [ 0.668797] pci 0000:00:1c.5: IO window: 0xd000-0xdfff [ 0.668802] pci 0000:00:1c.5: MEM window: 0xf3000000-0xf4ffffff [ 0.668806] pci 0000:00:1c.5: PREFETCH window: 0x000000f5200000-0x000000f52fffff [ 0.668812] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:05 [ 0.668814] pci 0000:00:1e.0: IO window: disabled [ 0.668818] pci 0000:00:1e.0: MEM window: 0xf5000000-0xf50fffff [ 0.668822] pci 0000:00:1e.0: PREFETCH window: disabled [ 0.668836] pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 0.668839] pci 0000:00:01.0: setting latency timer to 64 [ 0.668846] pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 0.668850] pci 0000:00:1c.0: setting latency timer to 64 [ 0.668857] pci 0000:00:1c.4: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 0.668861] pci 0000:00:1c.4: setting latency timer to 64 [ 0.668869] pci 0000:00:1c.5: PCI INT B -> GSI 17 (level, low) -> IRQ 17 [ 0.668873] pci 0000:00:1c.5: setting latency timer to 64 [ 0.668879] pci 0000:00:1e.0: setting latency timer to 64 [ 0.668883] bus: 00 index 0 io port: [0x00-0xffff] [ 0.668885] bus: 00 index 1 mmio: [0x000000-0xffffffffffffffff] [ 0.668888] bus: 01 index 0 io port: [0xb000-0xbfff] [ 0.668890] bus: 01 index 1 mmio: [0xf0000000-0xf1ffffff] [ 0.668892] bus: 01 index 2 mmio: [0xe0000000-0xefffffff] [ 0.668894] bus: 01 index 3 mmio: [0x0-0x0] [ 0.668896] bus: 02 index 0 io port: [0xa000-0xafff] [ 0.668898] bus: 02 index 1 mmio: [0x0-0x0] [ 0.668900] bus: 02 index 2 mmio: [0x0-0x0] [ 0.668901] bus: 02 index 3 mmio: [0x0-0x0] [ 0.668903] bus: 03 index 0 io port: [0xc000-0xcfff] [ 0.668906] bus: 03 index 1 mmio: [0xf2000000-0xf2ffffff] [ 0.668907] bus: 03 index 2 mmio: [0x0-0x0] [ 0.668909] bus: 03 index 3 mmio: [0x0-0x0] [ 0.668911] bus: 04 index 0 io port: [0xd000-0xdfff] [ 0.668913] bus: 04 index 1 mmio: [0xf3000000-0xf4ffffff] [ 0.668915] bus: 04 index 2 mmio: [0xf5200000-0xf52fffff] [ 0.668917] bus: 04 index 3 mmio: [0x0-0x0] [ 0.668919] bus: 05 index 0 mmio: [0x0-0x0] [ 0.668921] bus: 05 index 1 mmio: [0xf5000000-0xf50fffff] [ 0.668923] bus: 05 index 2 mmio: [0x0-0x0] [ 0.668925] bus: 05 index 3 io port: [0x00-0xffff] [ 0.668927] bus: 05 index 4 mmio: [0x000000-0xffffffffffffffff] [ 0.668939] NET: Registered protocol family 2 [ 0.704081] IP route cache hash table entries: 131072 (order: 8, 1048576 bytes) [ 0.704433] TCP established hash table entries: 262144 (order: 10, 4194304 bytes) [ 0.705662] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 0.707162] TCP: Hash tables configured (established 262144 bind 65536) [ 0.707166] TCP reno registered [ 0.716099] NET: Registered protocol family 1 [ 0.716223] checking if image is initramfs... it is [ 1.603817] Freeing initrd memory: 7755k freed [ 1.606747] audit: initializing netlink socket (disabled) [ 1.606771] type=2000 audit(1240899871.604:1): initialized [ 1.617031] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 1.619214] VFS: Disk quotas dquot_6.5.1 [ 1.619277] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 1.619917] fuse init (API version 7.10) [ 1.620002] msgmni has been set to 7796 [ 1.620179] alg: No test for stdrng (krng) [ 1.620192] io scheduler noop registered [ 1.620195] io scheduler anticipatory registered [ 1.620197] io scheduler deadline registered [ 1.620240] io scheduler cfq registered (default) [ 1.620381] pci 0000:01:00.0: Boot video device [ 1.623721] pcieport-driver 0000:00:01.0: setting latency timer to 64 [ 1.623755] pcieport-driver 0000:00:01.0: found MSI capability [ 1.623779] pcieport-driver 0000:00:01.0: irq 2303 for MSI/MSI-X [ 1.623789] pci_express 0000:00:01.0:pcie00: allocate port service [ 1.623805] pci_express 0000:00:01.0:pcie03: allocate port service [ 1.623853] pcieport-driver 0000:00:1c.0: setting latency timer to 64 [ 1.623885] pcieport-driver 0000:00:1c.0: found MSI capability [ 1.623909] pcieport-driver 0000:00:1c.0: irq 2302 for MSI/MSI-X [ 1.623920] pci_express 0000:00:1c.0:pcie00: allocate port service [ 1.623933] pci_express 0000:00:1c.0:pcie02: allocate port service [ 1.623948] pci_express 0000:00:1c.0:pcie03: allocate port service [ 1.624002] pcieport-driver 0000:00:1c.4: setting latency timer to 64 [ 1.624036] pcieport-driver 0000:00:1c.4: found MSI capability [ 1.624061] pcieport-driver 0000:00:1c.4: irq 2301 for MSI/MSI-X [ 1.624073] pci_express 0000:00:1c.4:pcie00: allocate port service [ 1.624086] pci_express 0000:00:1c.4:pcie02: allocate port service [ 1.624099] pci_express 0000:00:1c.4:pcie03: allocate port service [ 1.624156] pcieport-driver 0000:00:1c.5: setting latency timer to 64 [ 1.624188] pcieport-driver 0000:00:1c.5: found MSI capability [ 1.624211] pcieport-driver 0000:00:1c.5: irq 2300 for MSI/MSI-X [ 1.624223] pci_express 0000:00:1c.5:pcie00: allocate port service [ 1.624236] pci_express 0000:00:1c.5:pcie02: allocate port service [ 1.624249] pci_express 0000:00:1c.5:pcie03: allocate port service [ 1.624317] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 1.624691] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 [ 1.624842] input: Power Button (FF) as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0 [ 1.624845] ACPI: Power Button (FF) [PWRF] [ 1.624893] input: Power Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1 [ 1.624895] ACPI: Power Button (CM) [PWRB] [ 1.625245] processor ACPI_CPU:00: registered as cooling_device0 [ 1.625249] ACPI: Processor [CPU0] (supports 8 throttling states) [ 1.625311] processor ACPI_CPU:01: registered as cooling_device1 [ 1.625315] ACPI: Processor [CPU1] (supports 8 throttling states) [ 1.652632] Linux agpgart interface v0.103 [ 1.652641] Serial: 8250/16550 driver4 ports, IRQ sharing enabled [ 1.652732] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 1.652822] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A [ 1.653119] 00:07: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 1.653256] 00:08: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A [ 1.654086] brd: module loaded [ 1.654429] loop: module loaded [ 1.654502] Fixed MDIO Bus: probed [ 1.654507] PPP generic driver version 2.4.2 [ 1.654569] input: Macintosh mouse button emulation as /devices/virtual/input/input2 [ 1.654598] Driver 'sd' needs updating - please use bus_type methods [ 1.654608] Driver 'sr' needs updating - please use bus_type methods [ 1.654651] ahci 0000:00:1f.2: version 3.0 [ 1.654664] ahci 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19 [ 1.654698] ahci 0000:00:1f.2: irq 2299 for MSI/MSI-X [ 1.654763] ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 6 ports 3 Gbps 0x3f impl SATA mode [ 1.654767] ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led clo pmp pio slum part ems [ 1.654772] ahci 0000:00:1f.2: setting latency timer to 64 [ 1.655065] scsi0 : ahci [ 1.655159] scsi1 : ahci [ 1.655224] scsi2 : ahci [ 1.655285] scsi3 : ahci [ 1.655356] scsi4 : ahci [ 1.655425] scsi5 : ahci [ 1.655554] ata1: SATA max UDMA/133 abar m2...@0xf5106000 port 0xf5106100 irq 2299 [ 1.655558] ata2: SATA max UDMA/133 abar m2...@0xf5106000 port 0xf5106180 irq 2299 [ 1.655561] ata3: SATA max UDMA/133 abar m2...@0xf5106000 port 0xf5106200 irq 2299 [ 1.655563] ata4: SATA max UDMA/133 abar m2...@0xf5106000 port 0xf5106280 irq 2299 [ 1.655566] ata5: SATA max UDMA/133 abar m2...@0xf5106000 port 0xf5106300 irq 2299 [ 1.655569] ata6: SATA max UDMA/133 abar m2...@0xf5106000 port 0xf5106380 irq 2299 [ 2.136012] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 2.173884] ata1.00: ATA-7: ST3320620AS, 3.AAJ, max UDMA/133 [ 2.173887] ata1.00: 625142448 sectors, multi 0: LBA48 NCQ (depth 31/32) [ 2.232205] ata1.00: configured for UDMA/133 [ 2.732016] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 2.774818] ata2.00: ATA-7: ST3320620AS, 3.AAJ, max UDMA/133 [ 2.774821] ata2.00: 625142448 sectors, multi 0: LBA48 NCQ (depth 31/32) [ 2.833136] ata2.00: configured for UDMA/133 [ 3.668011] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 3.676924] ata3.00: ATAPI: LITE-ON COMBO SHC-52S7K, VK03, max UDMA/100 [ 3.686172] ata3.00: configured for UDMA/100 [ 4.576011] ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 4.589039] ata4.00: ATAPI: LITE-ON DVDRW LH-20A1S, 9L02, max UDMA/100, ATAPI AN [ 4.602387] ata4.00: configured for UDMA/100 [ 5.100012] ata5: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 5.120485] ata5.00: ATA-8: SAMSUNG HD501LJ, CR100-10, max UDMA7 [ 5.120488] ata5.00: 976773168 sectors, multi 0: LBA48 NCQ (depth 31/32) [ 5.122453] ata5.00: configured for UDMA/133 [ 5.456012] ata6: SATA link down (SStatus 0 SControl 300) [ 5.472102] scsi 0:0:0:0: Direct-Access ATA ST3320620AS 3.AA PQ: 0 ANSI: 5 [ 5.472201] sd 0:0:0:0: [sda] 625142448 512-byte hardware sectors: (320 GB/298 GiB) [ 5.472220] sd 0:0:0:0: [sda] Write Protect is off [ 5.472223] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 5.472253] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 5.472319] sd 0:0:0:0: [sda] 625142448 512-byte hardware sectors: (320 GB/298 GiB) [ 5.472336] sd 0:0:0:0: [sda] Write Protect is off [ 5.472339] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 5.472368] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 5.472372] sda: sda1 sda2 [ 5.505892] sd 0:0:0:0: [sda] Attached SCSI disk [ 5.505940] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 5.506024] scsi 1:0:0:0: Direct-Access ATA ST3320620AS 3.AA PQ: 0 ANSI: 5 [ 5.506117] sd 1:0:0:0: [sdb] 625142448 512-byte hardware sectors: (320 GB/298 GiB) [ 5.506135] sd 1:0:0:0: [sdb] Write Protect is off [ 5.506138] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00 [ 5.506168] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 5.506227] sd 1:0:0:0: [sdb] 625142448 512-byte hardware sectors: (320 GB/298 GiB) [ 5.506244] sd 1:0:0:0: [sdb] Write Protect is off [ 5.506246] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00 [ 5.506276] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 5.506280] sdb: sdb1 [ 5.521656] sd 1:0:0:0: [sdb] Attached SCSI disk [ 5.521703] sd 1:0:0:0: Attached scsi generic sg1 type 0 [ 5.837911] scsi 2:0:0:0: CD-ROM LITE-ON COMBO SHC-52S7K VK03 PQ: 0 ANSI: 5 [ 6.959130] sr0: scsi3-mmc drive: 0x/52x writer cd/rw xa/form2 cdda tray [ 6.959133] Uniform CD-ROM driver Revision: 3.20 [ 6.959224] sr 2:0:0:0: Attached scsi CD-ROM sr0 [ 6.959263] sr 2:0:0:0: Attached scsi generic sg2 type 5 [ 6.960374] scsi 3:0:0:0: CD-ROM LITE-ON DVDRW LH-20A1S 9L02 PQ: 0 ANSI: 5 [ 6.965945] sr1: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray [ 6.966013] sr 3:0:0:0: Attached scsi CD-ROM sr1 [ 6.966054] sr 3:0:0:0: Attached scsi generic sg3 type 5 [ 6.966126] scsi 4:0:0:0: Direct-Access ATA SAMSUNG HD501LJ CR10 PQ: 0 ANSI: 5 [ 6.966217] sd 4:0:0:0: [sdc] 976773168 512-byte hardware sectors: (500 GB/465 GiB) [ 6.966234] sd 4:0:0:0: [sdc] Write Protect is off [ 6.966237] sd 4:0:0:0: [sdc] Mode Sense: 00 3a 00 00 [ 6.966266] sd 4:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 6.966324] sd 4:0:0:0: [sdc] 976773168 512-byte hardware sectors: (500 GB/465 GiB) [ 6.966341] sd 4:0:0:0: [sdc] Write Protect is off [ 6.966344] sd 4:0:0:0: [sdc] Mode Sense: 00 3a 00 00 [ 6.966372] sd 4:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 6.966376] sdc: sdc1 [ 7.027294] sd 4:0:0:0: [sdc] Attached SCSI disk [ 7.027336] sd 4:0:0:0: Attached scsi generic sg4 type 0 [ 7.027752] pata_jmicron 0000:03:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 7.027779] pata_jmicron 0000:03:00.0: setting latency timer to 64 [ 7.027850] scsi6 : pata_jmicron [ 7.027917] scsi7 : pata_jmicron [ 7.028727] ata7: PATA max UDMA/100 cmd 0xc000 ctl 0xc100 bmdma 0xc400 irq 16 [ 7.028730] ata8: PATA max UDMA/100 cmd 0xc200 ctl 0xc300 bmdma 0xc408 irq 16 [ 7.340385] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 7.340404] ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 7.340418] ehci_hcd 0000:00:1a.7: setting latency timer to 64 [ 7.340421] ehci_hcd 0000:00:1a.7: EHCI Host Controller [ 7.340487] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1 [ 7.344388] ehci_hcd 0000:00:1a.7: cache line size of 32 is not supported [ 7.344401] ehci_hcd 0000:00:1a.7: irq 18, io mem 0xf5105000 [ 7.356010] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00 [ 7.356074] usb usb1: configuration #1 chosen from 1 choice [ 7.356104] hub 1-0:1.0: USB hub found [ 7.356112] hub 1-0:1.0: 6 ports detected [ 7.356221] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23 [ 7.356231] ehci_hcd 0000:00:1d.7: setting latency timer to 64 [ 7.356234] ehci_hcd 0000:00:1d.7: EHCI Host Controller [ 7.356278] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2 [ 7.360196] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported [ 7.360211] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xf5104000 [ 7.376009] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00 [ 7.376066] usb usb2: configuration #1 chosen from 1 choice [ 7.376092] hub 2-0:1.0: USB hub found [ 7.376099] hub 2-0:1.0: 6 ports detected [ 7.376196] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 7.376212] uhci_hcd: USB Universal Host Controller Interface driver [ 7.376234] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 7.376240] uhci_hcd 0000:00:1a.0: setting latency timer to 64 [ 7.376243] uhci_hcd 0000:00:1a.0: UHCI Host Controller [ 7.376288] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3 [ 7.376310] uhci_hcd 0000:00:1a.0: irq 16, io base 0x0000e100 [ 7.376387] usb usb3: configuration #1 chosen from 1 choice [ 7.376414] hub 3-0:1.0: USB hub found [ 7.376421] hub 3-0:1.0: 2 ports detected [ 7.376508] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21 [ 7.376514] uhci_hcd 0000:00:1a.1: setting latency timer to 64 [ 7.376518] uhci_hcd 0000:00:1a.1: UHCI Host Controller [ 7.376563] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4 [ 7.376592] uhci_hcd 0000:00:1a.1: irq 21, io base 0x0000e200 [ 7.376666] usb usb4: configuration #1 chosen from 1 choice [ 7.376694] hub 4-0:1.0: USB hub found [ 7.376701] hub 4-0:1.0: 2 ports detected [ 7.376786] uhci_hcd 0000:00:1a.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 7.376792] uhci_hcd 0000:00:1a.2: setting latency timer to 64 [ 7.376795] uhci_hcd 0000:00:1a.2: UHCI Host Controller [ 7.376837] uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5 [ 7.376859] uhci_hcd 0000:00:1a.2: irq 18, io base 0x0000e000 [ 7.376939] usb usb5: configuration #1 chosen from 1 choice [ 7.376965] hub 5-0:1.0: USB hub found [ 7.376971] hub 5-0:1.0: 2 ports detected [ 7.377064] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23 [ 7.377070] uhci_hcd 0000:00:1d.0: setting latency timer to 64 [ 7.377073] uhci_hcd 0000:00:1d.0: UHCI Host Controller [ 7.377123] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6 [ 7.377144] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000e300 [ 7.377224] usb usb6: configuration #1 chosen from 1 choice [ 7.377251] hub 6-0:1.0: USB hub found [ 7.377257] hub 6-0:1.0: 2 ports detected [ 7.377343] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19 [ 7.377349] uhci_hcd 0000:00:1d.1: setting latency timer to 64 [ 7.377353] uhci_hcd 0000:00:1d.1: UHCI Host Controller [ 7.377396] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7 [ 7.377424] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000e400 [ 7.377501] usb usb7: configuration #1 chosen from 1 choice [ 7.377528] hub 7-0:1.0: USB hub found [ 7.377534] hub 7-0:1.0: 2 ports detected [ 7.377622] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 7.377628] uhci_hcd 0000:00:1d.2: setting latency timer to 64 [ 7.377631] uhci_hcd 0000:00:1d.2: UHCI Host Controller [ 7.377680] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8 [ 7.377701] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000e500 [ 7.377780] usb usb8: configuration #1 chosen from 1 choice [ 7.377808] hub 8-0:1.0: USB hub found [ 7.377814] hub 8-0:1.0: 2 ports detected [ 7.377957] usbcore: registered new interface driver libusual [ 7.377990] usbcore: registered new interface driver usbserial [ 7.378001] USB Serial support registered for generic [ 7.378018] usbcore: registered new interface driver usbserial_generic [ 7.378020] usbserial: USB Serial Driver core [ 7.378075] PNP: No PS/2 controller found. Probing ports directly. [ 7.378358] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 7.378363] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 7.388539] mice: PS/2 mouse device common for all mice [ 7.424557] rtc_cmos 00:03: RTC can wake from S4 [ 7.424591] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0 [ 7.424614] rtc0: alarms up to one month, 242 bytes nvram, hpet irqs [ 7.424676] device-mapper: uevent: version 1.0.3 [ 7.424764] device-mapper: ioctl: 4.14.0-ioctl (2008-04-23) initialised: dm-de...@redhat.com [ 7.424851] device-mapper: multipath: version 1.0.5 loaded [ 7.424854] device-mapper: multipath round-robin: version 1.0.0 loaded [ 7.424955] cpuidle: using governor ladder [ 7.424957] cpuidle: using governor menu [ 7.425404] TCP cubic registered [ 7.425475] NET: Registered protocol family 10 [ 7.425908] lo: Disabled Privacy Extensions [ 7.426226] NET: Registered protocol family 17 [ 7.426244] Bluetooth: L2CAP ver 2.11 [ 7.426246] Bluetooth: L2CAP socket layer initialized [ 7.426249] Bluetooth: SCO (Voice Link) ver 0.6 [ 7.426251] Bluetooth: SCO socket layer initialized [ 7.426281] Bluetooth: RFCOMM socket layer initialized [ 7.426287] Bluetooth: RFCOMM TTY layer initialized [ 7.426288] Bluetooth: RFCOMM ver 1.10 [ 7.426422] registered taskstats version 1 [ 7.426559] Magic number: 5:101:419 [ 7.426631] rtc_cmos 00:03: setting system clock to 2009-04-28 06:24:37 UTC (1240899877) [ 7.426634] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 7.426636] EDD information not available. [ 7.426676] Freeing unused kernel memory: 536k freed [ 7.426843] Write protecting the kernel read-only data: 6708k [ 7.641437] Floppy drive(s): fd0 is 1.44M [ 7.660399] FDC 0 is a post-1991 82077 [ 7.672294] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded [ 7.672315] r8169 0000:04:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 [ 7.672335] r8169 0000:04:00.0: setting latency timer to 64 [ 7.672466] r8169 0000:04:00.0: irq 2298 for MSI/MSI-X [ 7.673147] eth0: RTL8168b/8111b at 0xffffc2000007a000, 00:1a:4d:4d:71:ca, XID 38000000 IRQ 2298 [ 7.722690] ohci1394 0000:05:07.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23 [ 7.772421] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[23] MMIO=[f5014000-f50147ff] Max Packet=[2048] IR/IT contexts=[4/8] [ 7.916618] usb 4-2: new low speed USB device using uhci_hcd and address 2 [ 8.095702] usb 4-2: configuration #1 chosen from 1 choice [ 8.115840] usbcore: registered new interface driver hiddev [ 8.130967] input: BTC USB Multimedia Cordless Kit as /devices/pci0000:00/0000:00:1a.1/usb4/4-2/4-2:1.0/input/input3 [ 8.152562] generic-usb 0003:046E:5250.0001: input,hidraw0: USB HID v1.00 Keyboard [BTC USB Multimedia Cordless Kit ] on usb-0000:00:1a.1-2/input0 [ 8.200696] input: BTC USB Multimedia Cordless Kit as /devices/pci0000:00/0000:00:1a.1/usb4/4-2/4-2:1.1/input/input4 [ 8.236589] generic-usb 0003:046E:5250.0002: input,hiddev96,hidraw1: USB HID v1.00 Mouse [BTC USB Multimedia Cordless Kit ] on usb-0000:00:1a.1-2/input1 [ 8.236605] usbcore: registered new interface driver usbhid [ 8.236608] usbhid: v2.6:USB HID core driver [ 8.305341] PM: Starting manual resume from disk [ 8.305345] PM: Resume from partition 8:1 [ 8.305346] PM: Checking hibernation image. [ 8.305467] PM: Resume from disk failed. [ 8.347055] kjournald starting. Commit interval 5 seconds [ 8.347063] EXT3-fs: mounted filesystem with ordered data mode. [ 9.052685] ieee1394: Host added: ID:BUS[0-00:1023] GUID[00c7572b00001a4d] [ 12.661741] udev: starting version 141 [ 12.764149] parport_pc 00:09: reported by Plug and Play ACPI [ 12.764193] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE] [ 12.892486] iTCO_vendor_support: vendor-support=0 [ 12.910182] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.05 [ 12.910342] iTCO_wdt: Found a ICH9R TCO device (Version=2, TCOBASE=0x0460) [ 12.910425] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0) [ 13.004589] cfg80211: Calling CRDA to update world regulatory domain [ 13.036103] input: PC Speaker as /devices/platform/pcspkr/input/input5 [ 13.180033] ppdev: user-space parallel port driver [ 13.379758] cfg80211: World regulatory domain updated: [ 13.379762] (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 13.379765] (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 13.379767] (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 13.379770] (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 13.379772] (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 13.379774] (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 13.562837] ath5k_pci 0000:05:01.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19 [ 13.562904] ath5k_pci 0000:05:01.0: registered as 'phy0' [ 13.617832] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22 [ 13.617879] HDA Intel 0000:00:1b.0: setting latency timer to 64 [ 13.649201] phy0: Selected rate control algorithm 'pid' [ 13.687523] ath5k phy0: Atheros AR2413 chip found (MAC: 0x78, PHY: 0x45) [ 13.809077] lp0: using parport0 (interrupt-driven). [ 13.889936] Adding 1044216k swap on /dev/sda1. Priority:-1 extents:1 across:1044216k [ 14.429034] EXT3 FS on sda2, internal journal [ 15.435627] type=1505 audit(1240899885.505:2): operation="profile_load" name="/usr/share/gdm/guest-session/Xsession" name2="default" pid=2208 [ 15.480594] type=1505 audit(1240899885.553:3): operation="profile_load" name="/sbin/dhclient-script" name2="default" pid=2212 [ 15.480692] type=1505 audit(1240899885.553:4): operation="profile_load" name="/sbin/dhclient3" name2="default" pid=2212 [ 15.480733] type=1505 audit(1240899885.553:5): operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" name2="default" pid=2212 [ 15.480772] type=1505 audit(1240899885.553:6): operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" name2="default" pid=2212 [ 15.604786] type=1505 audit(1240899885.677:7): operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" name2="default" pid=2217 [ 15.604937] type=1505 audit(1240899885.677:8): operation="profile_load" name="/usr/sbin/cupsd" name2="default" pid=2217 [ 15.633116] type=1505 audit(1240899885.705:9): operation="profile_load" name="/usr/sbin/tcpdump" name2="default" pid=2221 [ 15.811203] ip_tables: (C) 2000-2006 Netfilter Core Team [ 15.846408] nf_conntrack version 0.5.0 (16384 buckets, 65536 max) [ 15.846602] CONFIG_NF_CT_ACCT is deprecated and will be removed soon. Please use [ 15.846604] nf_conntrack.acct=1 kernel paramater, acct=1 nf_conntrack module option or [ 15.846606] sysctl net.netfilter.nf_conntrack_acct=1 to enable it. [ 15.879199] ip6_tables: (C) 2000-2006 Netfilter Core Team [ 18.735715] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 18.735718] Bluetooth: BNEP filters: protocol multicast [ 18.757851] Bridge firewalling registered [ 20.086690] pci 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 20.480871] [drm] Initialized drm 1.1.0 20060810 [ 20.612019] pci 0000:01:00.0: setting latency timer to 64 [ 20.612144] [drm] Initialized radeon 1.29.0 20080528 on minor 0 [ 20.614335] mtrr: type mismatch for e0000000,10000000 old: write-back new: write-combining [ 20.852138] mtrr: type mismatch for e0000000,10000000 old: write-back new: write-combining [ 20.852207] mtrr: type mismatch for e0000000,10000000 old: write-back new: write-combining [ 20.852258] mtrr: type mismatch for e0000000,10000000 old: write-back new: write-combining [ 20.915872] [drm] Setting GART location based on new memory map [ 20.916991] [drm] Loading R500 Microcode [ 20.917019] [drm] Num pipes: 2 [ 20.917026] [drm] writeback test succeeded in 1 usecs [ 23.929131] r8169: eth0: link down [ 23.929916] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 23.974069] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 53.916998] wlan0: authenticate with AP 00:1c:11:3b:4e:d0 [ 53.918226] wlan0: authenticated [ 53.918229] wlan0: associate with AP 00:1c:11:3b:4e:d0 [ 53.920834] wlan0: RX AssocResp from 00:1c:11:3b:4e:d0 (capab=0x451 status=0 aid=5) [ 53.920838] wlan0: associated [ 53.921702] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready [ 64.044506] wlan0: no IPv6 routers present [ 77.043464] ath5k phy0: noise floor calibration timeout (2437MHz) [ 715.639316] ath5k phy0: noise floor calibration timeout (2432MHz) [ 837.199359] ath5k phy0: noise floor calibration timeout (2437MHz) [ 896.132718] ath5k phy0: noise floor calibration timeout (2437MHz) [ 1078.132012] ath5k phy0: noise floor calibration timeout (2437MHz) ** Affects: xorg (Ubuntu) Importance: Undecided Status: New -- Jaunty Crashes Randomly https://bugs.launchpad.net/bugs/368410 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs