Public bug reported:
First, just to compare (don't be worried ;-)
Mandriva 2009.1 with self-compiled kernel:
# uname -a
Linux woodpecker.woodpecker.fdns.net 2.6.25.11-2tmb64Gdazuko #1 SMP PREEMPT Sun
Dec 21 00:49:39 CET 2008 i686 AMD Athlon(tm) 64 X2 Dual Core Processor 5600+
[ 327.371306] usb 2-4: new high speed USB device using ehci_hcd and address 7
[ 327.496473] usb 2-4: configuration #1 chosen from 1 choice
[ 327.497569] scsi6 : SCSI emulation for USB Mass Storage devices
[ 330.580921] usb-storage: device found at 7
[ 330.580927] usb-storage: waiting for device to settle before scanning
[ 332.579233] scsi 6:0:0:0: Direct-Access SAMSUNG HM500LI
PQ: 0 ANSI: 2 CCS
[ 332.583274] sd 6:0:0:0: [sde] 976773168 512-byte hardware sectors (500108 MB)
[ 332.586608] sd 6:0:0:0: [sde] Write Protect is off
[ 332.586608] sd 6:0:0:0: [sde] Mode Sense: 34 00 00 00
[ 332.586608] sd 6:0:0:0: [sde] Assuming drive cache: write through
[ 332.589070] sd 6:0:0:0: [sde] 976773168 512-byte hardware sectors (500108 MB)
[ 332.592188] sd 6:0:0:0: [sde] Write Protect is off
[ 332.592192] sd 6:0:0:0: [sde] Mode Sense: 34 00 00 00
[ 332.592194] sd 6:0:0:0: [sde] Assuming drive cache: write through
[ 332.592198] sde: sde1
[ 332.653139] sd 6:0:0:0: [sde] Attached SCSI disk
[ 332.653139] sd 6:0:0:0: Attached scsi generic sg5 type 0
[ 332.653139] usb-storage: device scan complete
# fdisk -l /dev/sde
Platte /dev/sde: 500.1 GByte, 500107862016 Byte
255 Köpfe, 63 Sektoren/Spuren, 60801 Zylinder
Einheiten = Zylinder von 16065 × 512 = 8225280 Bytes
Disk identifier: 0x934a7d2e
Gerät boot. Anfang Ende Blöcke Id System
/dev/sde1 1 60801 488384001 7 HPFS/NTFS
lsusb -v
Bus 002 Device 007: ID 152d:2329 JMicron Technology Corp. / JMicron USA
Technology Corp.
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 2.00
bDeviceClass 0 (Defined at Interface level)
bDeviceSubClass 0
bDeviceProtocol 0
bMaxPacketSize0 64
idVendor 0x152d JMicron Technology Corp. / JMicron USA Technology
Corp.
idProduct 0x2329
bcdDevice 1.00
iManufacturer 1 JMicron
iProduct 2 USB to ATA/ATAPI Bridge
iSerial 5 1D0120997FFF
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 32
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 4 USB Mass Storage
bmAttributes 0xc0
Self Powered
MaxPower 2mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 2
bInterfaceClass 8 Mass Storage
bInterfaceSubClass 6 SCSI
bInterfaceProtocol 80 Bulk (Zip)
iInterface 6 MSC Bulk-Only Transfer
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x02 EP 2 OUT
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 0
Device Qualifier (for other device speed):
bLength 10
bDescriptorType 6
bcdUSB 2.00
bDeviceClass 0 (Defined at Interface level)
bDeviceSubClass 0
bDeviceProtocol 0
bMaxPacketSize0 64
bNumConfigurations 1
can't get debug descriptor: Connection timed out
Device Status: 0x6e01
Self Powered
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 2.00
bDeviceClass 9 Hub
bDeviceSubClass 0 Unused
bDeviceProtocol 1 Single TT
bMaxPacketSize0 64
idVendor 0x1d6b Linux Foundation
idProduct 0x0002 2.0 root hub
bcdDevice 2.06
iManufacturer 3 Linux 2.6.25.11-2tmb64Gdazuko ehci_hcd
iProduct 2 EHCI Host Controller
iSerial 1 0000:00:02.1
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 25
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 0
bmAttributes 0xe0
Self Powered
Remote Wakeup
MaxPower 0mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 1
bInterfaceClass 9 Hub
bInterfaceSubClass 0 Unused
bInterfaceProtocol 0 Full speed (or root) hub
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0004 1x 4 bytes
bInterval 12
Hub Descriptor:
bLength 11
bDescriptorType 41
nNbrPorts 10
wHubCharacteristic 0x000a
No power switching (usb 1.0)
Per-port overcurrent protection
TT think time 8 FS bits
bPwrOn2PwrGood 10 * 2 milli seconds
bHubContrCurrent 0 milli Ampere
DeviceRemovable 0x00 0x00
PortPwrCtrlMask 0xff 0xff
Hub Port Status:
Port 1: 0000.0100 power
Port 2: 0000.0100 power
Port 3: 0000.0100 power
Port 4: 0000.0503 highspeed power enable connect
Port 5: 0000.0100 power
Port 6: 0000.0100 power
Port 7: 0000.0100 power
Port 8: 0000.0100 power
Port 9: 0000.0100 power
Port 10: 0000.0100 power
Device Status: 0x0003
Self Powered
Remote Wakeup Enabled
Bus 001 Device 002: ID 05fe:0011 Chic Technology Corp. Browser Mouse
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 1.10
bDeviceClass 0 (Defined at Interface level)
bDeviceSubClass 0
bDeviceProtocol 0
bMaxPacketSize0 8
idVendor 0x05fe Chic Technology Corp.
idProduct 0x0011 Browser Mouse
bcdDevice 1.01
iManufacturer 2 Wireless Mouse
iProduct 2
iSerial 0
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 34
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 4 HID-Compliant Mouse
bmAttributes 0xa0
(Bus Powered)
Remote Wakeup
MaxPower 100mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 1
bInterfaceClass 3 Human Interface Device
bInterfaceSubClass 1 Boot Interface Subclass
bInterfaceProtocol 2 Mouse
iInterface 0
HID Device Descriptor:
bLength 9
bDescriptorType 33
bcdHID 1.10
bCountryCode 0 Not supported
bNumDescriptors 1
bDescriptorType 34 Report
wDescriptorLength 72
Report Descriptors:
** UNAVAILABLE **
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0004 1x 4 bytes
bInterval 10
Device Status: 0x0002
(Bus Powered)
Remote Wakeup Enabled
Bus 001 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 1.10
bDeviceClass 9 Hub
bDeviceSubClass 0 Unused
bDeviceProtocol 0 Full speed (or root) hub
bMaxPacketSize0 64
idVendor 0x1d6b Linux Foundation
idProduct 0x0001 1.1 root hub
bcdDevice 2.06
iManufacturer 3 Linux 2.6.25.11-2tmb64Gdazuko ohci_hcd
iProduct 2 OHCI Host Controller
iSerial 1 0000:00:02.0
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 25
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 0
bmAttributes 0xe0
Self Powered
Remote Wakeup
MaxPower 0mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 1
bInterfaceClass 9 Hub
bInterfaceSubClass 0 Unused
bInterfaceProtocol 0 Full speed (or root) hub
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0002 1x 2 bytes
bInterval 255
Hub Descriptor:
bLength 11
bDescriptorType 41
nNbrPorts 10
wHubCharacteristic 0x0012
No power switching (usb 1.0)
No overcurrent protection
bPwrOn2PwrGood 1 * 2 milli seconds
bHubContrCurrent 0 milli Ampere
DeviceRemovable 0x00 0x00
PortPwrCtrlMask 0xff 0xff
Hub Port Status:
Port 1: 0000.0303 lowspeed power enable connect
Port 2: 0000.0100 power
Port 3: 0000.0100 power
Port 4: 0000.0100 power
Port 5: 0000.0100 power
Port 6: 0000.0100 power
Port 7: 0000.0100 power
Port 8: 0000.0100 power
Port 9: 0000.0100 power
Port 10: 0000.0100 power
Device Status: 0x0003
Self Powered
Remote Wakeup Enabled
##### here goes Ubuntu ######
(K)ubuntu 9.10 with latest kernel
Linux woodpecker.woodpecker.fdns.net 2.6.30-9-generic #10-Ubuntu SMP Fri Jun 12
13:08:18 UTC 2009 x86_64 GNU/Linux
Jun 14 16:03:55 woodpecker kernel: [ 252.609045] usb 1-4: new high speed USB
device using ehci_hcd and address 8
Jun 14 16:03:55 woodpecker kernel: [ 252.742486] usb 1-4: configuration #1
chosen from 1 choice
Jun 14 16:03:55 woodpecker kernel: [ 252.747774] scsi7 : SCSI emulation for
USB Mass Storage devices
Jun 14 16:03:55 woodpecker kernel: [ 252.748205] usb-storage: device found at 8
Jun 14 16:03:55 woodpecker kernel: [ 252.748211] usb-storage: waiting for
device to settle before scanning
Jun 14 16:04:00 woodpecker kernel: [ 257.748158] usb-storage: device scan
complete
Jun 14 16:04:00 woodpecker kernel: [ 257.820963] scsi 7:0:0:0: Direct-Access
SAMSUNG HM500LI PQ: 0 ANSI: 2 CCS
Jun 14 16:04:00 woodpecker kernel: [ 257.821692] sd 7:0:0:0: Attached scsi
generic sg5 type 0
Jun 14 16:04:00 woodpecker kernel: [ 257.830053] sd 7:0:0:0: [sde] 976773168
512-byte hardware sectors: (500 GB/465 GiB)
Jun 14 16:04:00 woodpecker kernel: [ 257.832672] sd 7:0:0:0: [sde] Write
Protect is off
Jun 14 16:04:00 woodpecker kernel: [ 257.832679] sd 7:0:0:0: [sde] Mode Sense:
34 00 00 00
Jun 14 16:04:00 woodpecker kernel: [ 257.832684] sd 7:0:0:0: [sde] Assuming
drive cache: write through
Jun 14 16:04:00 woodpecker kernel: [ 257.836704] sd 7:0:0:0: [sde] Assuming
drive cache: write through
Jun 14 16:04:00 woodpecker kernel: [ 257.836718] sde: sde1
Jun 14 16:04:00 woodpecker kernel: [ 257.898841] sd 7:0:0:0: [sde] Attached
SCSI disk
#### everything looked fine until here .....
Jun 14 16:04:01 woodpecker kernel: [ 258.233044] usb 1-4: reset high speed USB
device using ehci_hcd and address 8
Jun 14 16:04:01 woodpecker kernel: [ 258.437477] usb 1-4: device descriptor
read/64, error -71
Jun 14 16:04:01 woodpecker kernel: [ 258.745690] usb 1-4: device descriptor
read/64, error -71
Jun 14 16:04:01 woodpecker kernel: [ 258.960036] usb 1-4: reset high speed USB
device using ehci_hcd and address 8
Jun 14 16:04:02 woodpecker kernel: [ 259.165041] usb 1-4: device descriptor
read/64, error -71
Jun 14 16:04:02 woodpecker kernel: [ 259.473041] usb 1-4: device descriptor
read/64, error -71
Jun 14 16:04:02 woodpecker kernel: [ 259.689056] usb 1-4: reset high speed USB
device using ehci_hcd and address 8
Jun 14 16:04:03 woodpecker kernel: [ 260.153049] usb 1-4: device not accepting
address 8, error -71
Jun 14 16:04:03 woodpecker kernel: [ 260.265057] usb 1-4: reset high speed USB
device using ehci_hcd and address 8
Jun 14 16:04:03 woodpecker kernel: [ 260.737026] usb 1-4: device not accepting
address 8, error -71
Jun 14 16:04:03 woodpecker kernel: [ 260.737095] usb 1-4: USB disconnect,
address 8
Jun 14 16:04:03 woodpecker kernel: [ 260.852029] usb 1-4: new high speed USB
device using ehci_hcd and address 9
Jun 14 16:04:03 woodpecker kernel: [ 261.058761] usb 1-4: device descriptor
read/64, error -71
Jun 14 16:04:04 woodpecker kernel: [ 261.365050] usb 1-4: device descriptor
read/64, error -71
Jun 14 16:04:04 woodpecker kernel: [ 261.581035] usb 1-4: new high speed USB
device using ehci_hcd and address 10
Jun 14 16:04:04 woodpecker kernel: [ 261.785051] usb 1-4: device descriptor
read/64, error -71
Jun 14 16:04:05 woodpecker kernel: [ 262.093045] usb 1-4: device descriptor
read/64, error -71
Jun 14 16:04:05 woodpecker kernel: [ 262.316868] usb 1-4: new high speed USB
device using ehci_hcd and address 11
Jun 14 16:04:05 woodpecker kernel: [ 262.785028] usb 1-4: device not accepting
address 11, error -71
Jun 14 16:04:05 woodpecker kernel: [ 262.897045] usb 1-4: new high speed USB
device using ehci_hcd and address 12
Jun 14 16:04:06 woodpecker kernel: [ 263.361032] usb 1-4: device not accepting
address 12, error -71
Jun 14 16:04:06 woodpecker kernel: [ 263.361066] hub 1-0:1.0: unable to
enumerate USB device on port 4
Jun 14 16:04:06 woodpecker kernel: [ 263.817044] usb 2-4: new full speed USB
device using ohci_hcd and address 7
Jun 14 16:04:06 woodpecker kernel: [ 264.001048] usb 2-4: device descriptor
read/64, error -62
Jun 14 16:04:07 woodpecker kernel: [ 264.289054] usb 2-4: device descriptor
read/64, error -62
Jun 14 16:04:07 woodpecker kernel: [ 264.569051] usb 2-4: new full speed USB
device using ohci_hcd and address 8
Jun 14 16:04:07 woodpecker kernel: [ 264.753042] usb 2-4: device descriptor
read/64, error -62
Jun 14 16:04:07 woodpecker kernel: [ 265.041039] usb 2-4: device descriptor
read/64, error -62
Jun 14 16:04:08 woodpecker kernel: [ 265.321043] usb 2-4: new full speed USB
device using ohci_hcd and address 9
Jun 14 16:04:08 woodpecker kernel: [ 265.729028] usb 2-4: device not accepting
address 9, error -62
Jun 14 16:04:08 woodpecker kernel: [ 265.905048] usb 2-4: new full speed USB
device using ohci_hcd and address 10
Jun 14 16:04:09 woodpecker kernel: [ 266.313025] usb 2-4: device not accepting
address 10, error -62
Jun 14 16:04:09 woodpecker kernel: [ 266.313059] hub 2-0:1.0: unable to
enumerate USB device on port 4
(no additional sd/hd device found here)
lsusb -v again:
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 2.00
bDeviceClass 9 Hub
bDeviceSubClass 0 Unused
bDeviceProtocol 0 Full speed (or root) hub
bMaxPacketSize0 64
idVendor 0x1d6b Linux Foundation
idProduct 0x0002 2.0 root hub
bcdDevice 2.06
iManufacturer 3 Linux 2.6.30-9-generic ehci_hcd
iProduct 2 EHCI Host Controller
iSerial 1 0000:00:02.1
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 25
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 0
bmAttributes 0xe0
Self Powered
Remote Wakeup
MaxPower 0mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 1
bInterfaceClass 9 Hub
bInterfaceSubClass 0 Unused
bInterfaceProtocol 0 Full speed (or root) hub
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0004 1x 4 bytes
bInterval 12
Hub Descriptor:
bLength 11
bDescriptorType 41
nNbrPorts 10
wHubCharacteristic 0x000a
No power switching (usb 1.0)
Per-port overcurrent protection
bPwrOn2PwrGood 10 * 2 milli seconds
bHubContrCurrent 0 milli Ampere
DeviceRemovable 0x00 0x00
PortPwrCtrlMask 0xff 0xff
Hub Port Status:
Port 1: 0000.0100 power
Port 2: 0000.0100 power
Port 3: 0000.0100 power
Port 4: 0000.0100 power
Port 5: 0000.0100 power
Port 6: 0000.0100 power
Port 7: 0000.0100 power
Port 8: 0000.0100 power
Port 9: 0000.0100 power
Port 10: 0000.0100 power
Device Status: 0x0003
Self Powered
Remote Wakeup Enabled
Bus 002 Device 002: ID 05fe:0011 Chic Technology Corp. Browser Mouse
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 1.10
bDeviceClass 0 (Defined at Interface level)
bDeviceSubClass 0
bDeviceProtocol 0
bMaxPacketSize0 8
idVendor 0x05fe Chic Technology Corp.
idProduct 0x0011 Browser Mouse
bcdDevice 1.01
iManufacturer 2 Wireless Mouse
iProduct 2 Wireless Mouse
iSerial 0
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 34
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 4 HID-Compliant Mouse
bmAttributes 0xa0
(Bus Powered)
Remote Wakeup
MaxPower 100mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 1
bInterfaceClass 3 Human Interface Device
bInterfaceSubClass 1 Boot Interface Subclass
bInterfaceProtocol 2 Mouse
iInterface 0
** UNRECOGNIZED: 09 21 10 01 00 01 22 48 00
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0004 1x 4 bytes
bInterval 10
Device Status: 0x0002
(Bus Powered)
Remote Wakeup Enabled
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 1.10
bDeviceClass 9 Hub
bDeviceSubClass 0 Unused
bDeviceProtocol 0 Full speed (or root) hub
bMaxPacketSize0 64
idVendor 0x1d6b Linux Foundation
idProduct 0x0001 1.1 root hub
bcdDevice 2.06
iManufacturer 3 Linux 2.6.30-9-generic ohci_hcd
iProduct 2 OHCI Host Controller
iSerial 1 0000:00:02.0
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 25
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 0
bmAttributes 0xe0
Self Powered
Remote Wakeup
MaxPower 0mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 1
bInterfaceClass 9 Hub
bInterfaceSubClass 0 Unused
bInterfaceProtocol 0 Full speed (or root) hub
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0002 1x 2 bytes
bInterval 255
Hub Descriptor:
bLength 11
bDescriptorType 41
nNbrPorts 10
wHubCharacteristic 0x0012
No power switching (usb 1.0)
No overcurrent protection
bPwrOn2PwrGood 1 * 2 milli seconds
bHubContrCurrent 0 milli Ampere
DeviceRemovable 0x00 0x00
PortPwrCtrlMask 0xff 0xff
Hub Port Status:
Port 1: 0000.0303 lowspeed power enable connect
Port 2: 0000.0100 power
Port 3: 0000.0100 power
Port 4: 0000.0101 power connect
Port 5: 0000.0100 power
Port 6: 0000.0100 power
Port 7: 0000.0100 power
Port 8: 0000.0100 power
Port 9: 0000.0100 power
Port 10: 0000.0100 power
Device Status: 0x0003
Self Powered
Remote Wakeup Enabled
finally, after (re)attaching the usb harddisk and running "lsusb" twice
in fast succession:
# lsusb
Bus 001 Device 013: ID 152d:2329 JMicron Technology Corp. / JMicron USA
Technology Corp.
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 002: ID 05fe:0011 Chic Technology Corp. Browser Mouse
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
r...@woodpecker:/mnt/mandriva# lsusb
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 002: ID 05fe:0011 Chic Technology Corp. Browser Mouse
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
so, it got the jmicron adapter but lost it.
Once again, kernel is the latest 2.6.30-9 (but it didn't work with -6 and -8
as well).
** Affects: linux (Ubuntu)
Importance: Undecided
Status: New
--
usb-harddrive jmicron usb-sata thrown off
https://bugs.launchpad.net/bugs/386975
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
--
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
