When I attach the disk plugged into usb-ide cable, I get the following (dmesg): [ 9865.244535] usb 2-3: new high speed USB device using ehci_hcd and address 3 [ 9865.378467] usb 2-3: configuration #1 chosen from 1 choice [ 9865.381158] scsi7 : SCSI emulation for USB Mass Storage devices [ 9865.381789] usb-storage: device found at 3 [ 9865.381792] usb-storage: waiting for device to settle before scanning [ 9870.380392] usb-storage: device scan complete [ 9870.383785] scsi 7:0:0:0: Direct-Access Maxtor 6 Y120L0 0811 PQ: 0 ANSI: 0 [ 9870.388434] sd 7:0:0:0: [sdc] 240121728 512-byte hardware sectors: (122 GB/114 GiB) [ 9870.409709] sd 7:0:0:0: [sdc] Test WP failed, assume Write Enabled [ 9870.409719] sd 7:0:0:0: [sdc] Assuming drive cache: write through [ 9870.410802] sd 7:0:0:0: [sdc] 240121728 512-byte hardware sectors: (122 GB/114 GiB) [ 9870.415089] sd 7:0:0:0: [sdc] Test WP failed, assume Write Enabled [ 9870.415099] sd 7:0:0:0: [sdc] Assuming drive cache: write through [ 9870.415110] sdc: unknown partition table [ 9870.422657] sd 7:0:0:0: [sdc] Attached SCSI disk [ 9870.422811] sd 7:0:0:0: Attached scsi generic sg3 type 0 [10182.285321] usb 2-3: USB disconnect, address 3
-- Usb2 to ide storage device not working properly https://bugs.launchpad.net/bugs/45428 You received this bug notification because you are a member of Ubuntu Bugs, which is a direct subscriber. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs