Dear Mr.Muscovac,
thanks for your mail.Here I will try to send to you the configuration file
(/etc/
X11/xorg.conf)and Xserver log file(/var/log/Xorg.o.log),hoping it works?
As I can't work with the graphic desktop,because I see only the blanc screen
without the top and lower panels,I could do it only on roundabout way.
How I can manage your second point,running without any /etc/X11/xorg.conf
and autodetect my display and video card?Shall I remove that file?I tried to
save the file with <cp>,but it did'nt work.
By the way,can I install again 9.04 over the actual ubuntu 9.04?
In the meantime I removed the ubuntu 8.10.which I had installed parallel
under windows with >wubi>,and which is doing the same trouble as 9.04,and
installed it again with >wubi> from CD,it was working correct one time,and new
the same trouble like 9.04.
Best regards Günter Schlicht.
# xorg.conf (X.Org X Window System server configuration file)
#
# This file was generated by dexconf, the Debian X Configuration tool, using
# values from the debconf database.
#
# Edit this file with caution, and see the xorg.conf manual page.
# (Type "man xorg.conf" at the shell prompt.)
#
# This file is automatically updated on xserver-xorg package upgrades *only*
# if it has not been modified since the last upgrade of the xserver-xorg
# package.
#
# Note that some configuration settings that could be done previously
# in this file, now are automatically configured by the server and settings
# here are ignored.
#
# If you have edited this file but would like it to be automatically updated
# again, run the following command:
# sudo dpkg-reconfigure -phigh xserver-xorg
Section "Device"
Identifier "Configured Video Device"
EndSection
Section "Monitor"
Identifier "Configured Monitor"
EndSection
Section "Screen"
Identifier "Default Screen"
Monitor "Configured Monitor"
Device "Configured Video Device"
EndSection
X.Org X Server 1.6.0
Release Date: 2009-2-25
X Protocol Version 11, Revision 0
Build Operating System: Linux 2.6.24-23-server i686 Ubuntu
Current Operating System: Linux guenter-desktop 2.6.28-13-generic #45-Ubuntu
SMP Tue Jun 30 19:49:51 UTC 2009 i686
Build Date: 09 April 2009 02:10:02AM
xorg-server 2:1.6.0-0ubuntu14 (bui...@rothera.buildd)
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Tue Jul 28 13:43:13 2009
(==) Using config file: "/etc/X11/xorg.conf"
(==) No Layout section. Using the first Screen section.
(**) |-->Screen "Default Screen" (0)
(**) | |-->Monitor "Configured Monitor"
(**) | |-->Device "Configured Video Device"
(==) Automatically adding devices
(==) Automatically enabling devices
(WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
Entry deleted from font path.
(==) FontPath set to:
/usr/share/fonts/X11/misc,
/usr/share/fonts/X11/100dpi/:unscaled,
/usr/share/fonts/X11/75dpi/:unscaled,
/usr/share/fonts/X11/Type1,
/usr/share/fonts/X11/100dpi,
/usr/share/fonts/X11/75dpi,
/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType,
built-ins
(==) ModulePath set to "/usr/lib/xorg/modules"
(II) Cannot locate a core pointer device.
(II) Cannot locate a core keyboard device.
(II) The server relies on HAL to provide the list of input devices.
If no devices become available, reconfigure HAL or disable
AllowEmptyInput.
(II) Loader magic: 0x3bc0
(II) Module ABI versions:
X.Org ANSI C Emulation: 0.4
X.Org Video Driver: 5.0
X.Org XInput driver : 4.0
X.Org Server Extension : 2.0
(II) Loader running on linux
(++) using VT number 7
(--) PCI:*(0...@1:0:0) Silicon Integrated Systems [SiS] 661/741/760 PCI/AGP or
662/761Gx PCIE VGA Display Adapter rev 0, Mem @ 0xd8000000/134217728,
0xe2000000/131072, I/O @ 0x0000c000/128
(II) Open ACPI successful (/var/run/acpid.socket)
(II) System resource ranges:
[0] -1 0 0xffffffff - 0xffffffff (0x1) MX[B]
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[5] -1 0 0x00000000 - 0x00000000 (0x1) IX[B]
(II) LoadModule: "extmod"
(II) Loading /usr/lib/xorg/modules/extensions//libextmod.so
(II) Module extmod: vendor="X.Org Foundation"
compiled for 1.6.0, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-DGA
(II) Loading extension DPMS
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "dbe"
(II) Loading /usr/lib/xorg/modules/extensions//libdbe.so
(II) Module dbe: vendor="X.Org Foundation"
compiled for 1.6.0, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "glx"
(II) Loading /usr/lib/xorg/modules/extensions//libglx.so
(II) Module glx: vendor="X.Org Foundation"
compiled for 1.6.0, module version = 1.0.0
ABI class: X.Org Server Extension, version 2.0
(==) AIGLX enabled
(II) Loading extension GLX
(II) LoadModule: "record"
(II) Loading /usr/lib/xorg/modules/extensions//librecord.so
(II) Module record: vendor="X.Org Foundation"
compiled for 1.6.0, module version = 1.13.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension RECORD
(II) LoadModule: "dri"
(II) Loading /usr/lib/xorg/modules/extensions//libdri.so
(II) Module dri: vendor="X.Org Foundation"
compiled for 1.6.0, module version = 1.0.0
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension XFree86-DRI
(II) LoadModule: "dri2"
(II) Loading /usr/lib/xorg/modules/extensions//libdri2.so
(II) Module dri2: vendor="X.Org Foundation"
compiled for 1.6.0, module version = 1.0.0
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DRI2
(II) Scanning /usr/share/xserver-xorg/pci directory for additional PCI ID's
supported by the drivers
(II) Matched sis from file name sis.ids
(==) Matched sis for the autoconfigured driver
(==) Assigned the driver to the xf86ConfigLayout
(II) LoadModule: "sis"
(II) Loading /usr/lib/xorg/modules/drivers//sis_drv.so
(II) Module sis: vendor="X.Org Foundation"
compiled for 1.5.99.902, module version = 0.10.1
Module class: X.Org Video Driver
ABI class: X.Org Video Driver, version 5.0
(II) SIS: driver for SiS chipsets: SIS5597/5598, SIS530/620,
SIS6326/AGP/DVD, SIS300/305, SIS630/730, SIS540, SIS315, SIS315H,
SIS315PRO/E, SIS550, SIS650/M650/651/740, SIS330(Xabre),
SIS660/[M]661[F|M]X/[M]670/[M]741[GX]/[M]760[GX]/[M]761[GX]/[M]770[GX],
SIS340
(II) SIS: driver for XGI chipsets: Volari Z7 (XG20),
Volari V3XT/V5/V8/Duo (XG40)
(II) Primary Device is: PCI 0...@00:00:0
(WW) Falling back to old probe method for sis
(WW) SIS: No matching Device section for instance (BusID PCI:0...@0:0:0) found
(--) Assigning device section with no busID to primary device
(--) Chipset
SIS660/[M]661[F|M]X/[M]670/[M]741[GX]/[M]760[GX]/[M]761[GX]/[M]770[GX] found
(II) resource ranges after xf86ClaimFixedResources() call:
[0] -1 0 0xffffffff - 0xffffffff (0x1) MX[B]
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[5] -1 0 0x00000000 - 0x00000000 (0x1) IX[B]
(II) resource ranges after probing:
[0] -1 0 0xffffffff - 0xffffffff (0x1) MX[B]
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[4] 0 0 0x000a0000 - 0x000affff (0x10000) MS[B]
[5] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[B]
[6] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[B]
[7] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[8] -1 0 0x00000000 - 0x00000000 (0x1) IX[B]
[9] 0 0 0x000003b0 - 0x000003bb (0xc) IS[B]
[10] 0 0 0x000003c0 - 0x000003df (0x20) IS[B]
(II) Setting vga for screen 0.
(II) SIS(0): SiS driver (2005/09/20-1, compiled for X.org 1.5.99.902)
(II) SIS(0): Copyright (C) 2001-2005 Thomas Winischhofer
<tho...@winischhofer.net> and others
(II) SIS(0): *** See http://www.winischhofer.at/linuxsisvga.shtml
(II) SIS(0): *** for documentation and updates.
(--) SIS(0): sisfb not found
(--) SIS(0): Relocated I/O registers at 0xC000
(II) Loading sub module "ramdac"
(II) LoadModule: "ramdac"
(II) Module "ramdac" already built-in
(II) SIS(0): Creating default Display subsection in Screen section
"Default Screen" for depth/fbbpp 24/32
(==) SIS(0): Depth 24, (--) framebuffer bpp 32
(==) SIS(0): RGB weight 888
(==) SIS(0): Default visual is TrueColor
(WW) SIS(0): Could not find/read video BIOS
(==) SIS(0): Using XAA acceleration architecture
(==) SIS(0): Using HW cursor
(==) SIS(0): Color HW cursor is enabled
(II) SIS(0): Using VRAM command queue, size 512k
(==) SIS(0): Hotkey display switching is enabled
(II) SIS(0): WARNING: Using the Hotkey might freeze your machine, regardless
(II) SIS(0): whether enabled or disabled. This is no driver bug.
(==) SIS(0): SiSCtrl utility interface is disabled
(II) SIS(0): For information on SiSCtrl, see
http://www.winischhofer.at/linuxsispart1.shtml#sisctrl
(==) SIS(0): DRI disabled
(II) SIS(0): Checking OS for SSE support is not supported in this version of
X.org
(II) SIS(0): If your OS supports SSE, set the option "UseSSE" to "on".
(--) SIS(0): DIMM0 is DDR SDRAM
(--) SIS(0): DIMM1 is DDR SDRAM
(--) SIS(0): DIMM2 is not installed
(--) SIS(0): DRAM type: DDR SDRAM
(--) SIS(0): Memory clock: 332.892 MHz
(--) SIS(0): DRAM bus width: 64 bit
(--) SIS(0): Linear framebuffer at 0xD8000000
(--) SIS(0): MMIO registers at 0xE2000000 (size 64K)
(--) SIS(0): VideoRAM: 32768 KB
(II) SIS(0): Using 32192K of framebuffer memory at offset 0K
(--) SIS(0): Hardware supports two video overlays
(==) SIS(0): Using gamma correction (1.0, 1.0, 1.0)
(II) SIS(0): Gamma correction is enabled
(II) SIS(0): Separate Xv gamma correction is disabled
(--) SIS(0): Memory bandwidth at 32 bpp is 665.784 MHz
(II) Loading sub module "ddc"
(II) LoadModule: "ddc"
(II) Module "ddc" already built-in
(--) SIS(0): CRT1 DDC supported
(--) SIS(0): CRT1 DDC level: 2
(--) SIS(0): CRT1 DDC monitor info: *******************************************
(II) SIS(0): Manufacturer: PHL Model: 815 Serial#: 311652
(II) SIS(0): Year: 2002 Week: 51
(II) SIS(0): EDID Version: 1.3
(II) SIS(0): Analog Display Input, Input Voltage Level: 0.700/0.300 V
(II) SIS(0): Sync: Separate Composite SyncOnGreen
(II) SIS(0): Max Image Size [cm]: horiz.: 30 vert.: 23
(II) SIS(0): Gamma: 2.20
(II) SIS(0): DPMS capabilities: StandBy Suspend Off; RGB/Color Display
(II) SIS(0): First detailed timing is preferred mode
(II) SIS(0): redX: 0.623 redY: 0.335 greenX: 0.293 greenY: 0.599
(II) SIS(0): blueX: 0.144 blueY: 0.113 whiteX: 0.310 whiteY: 0.330
(II) SIS(0): Supported VESA Video Modes:
(II) SIS(0): 720x...@70hz
(II) SIS(0): 640x...@60hz
(II) SIS(0): 640x...@67hz
(II) SIS(0): 640x...@72hz
(II) SIS(0): 640x...@75hz
(II) SIS(0): 800x...@56hz
(II) SIS(0): 800x...@60hz
(II) SIS(0): 800x...@72hz
(II) SIS(0): 800x...@75hz
(II) SIS(0): 832x...@75hz
(II) SIS(0): 1024x...@60hz
(II) SIS(0): 1024x...@70hz
(II) SIS(0): 1024x...@75hz
(II) SIS(0): Manufacturer's mask: 0
(II) SIS(0): Supported additional Video Mode:
(II) SIS(0): clock: 65.0 MHz Image Size: 307 x 230 mm
(II) SIS(0): h_active: 1024 h_sync: 1048 h_sync_end 1184 h_blank_end 1344
h_border: 0
(II) SIS(0): v_active: 768 v_sync: 771 v_sync_end 777 v_blanking: 806
v_border: 0
(II) SIS(0): Serial No: CX 311652
(II) SIS(0): Monitor name: Philips 150V
(II) SIS(0): Ranges: V min: 56 V max: 76 Hz, H min: 30 H max: 61 kHz, PixClock
max 80 MHz
(II) SIS(0): EDID (in hex):
(II) SIS(0): d0c42a0800000000d8c42a080f000000
(II) SIS(0): 28ffffff2190130830c52a08f45f1e08
(II) SIS(0): 580df0bfca160d0830c52a0801000000
(II) SIS(0): 30c52a088c0df0bfabd41c08008dbfb7
(II) SIS(0): 00000000f45f1e08f70df0bf4c000000
(II) SIS(0): 780ef0bf780df0bf9d55b9b7fd0df0bf
(II) SIS(0): 01000000ffffffff73ad1c08900df0bf
(II) SIS(0): 180ef0bf97021008f50df0bf01000000
(II) SIS(0): EDID vendor "PHL", prod id 2069
(II) SIS(0): Using EDID range info for horizontal sync
(II) SIS(0): Using EDID range info for vertical refresh
(II) SIS(0): Printing DDC gathered Modelines:
(II) SIS(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777
806 -hsync -vsync (48.4 kHz)
(II) SIS(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628
+hsync +vsync (37.9 kHz)
(II) SIS(0): Modeline "800x600"x0.0 36.00 800 824 896 1024 600 601 603 625
+hsync +vsync (35.2 kHz)
(II) SIS(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500
-hsync -vsync (37.5 kHz)
(II) SIS(0): Modeline "640x480"x0.0 31.50 640 664 704 832 480 489 492 520
-hsync -vsync (37.9 kHz)
(II) SIS(0): Modeline "640x480"x0.0 30.24 640 704 768 864 480 483 486 525
-hsync -vsync (35.0 kHz)
(II) SIS(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525
-hsync -vsync (31.5 kHz)
(II) SIS(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449
-hsync +vsync (31.5 kHz)
(II) SIS(0): Modeline "1024x768"x0.0 78.75 1024 1040 1136 1312 768 769 772
800 +hsync +vsync (60.0 kHz)
(II) SIS(0): Modeline "1024x768"x0.0 75.00 1024 1048 1184 1328 768 771 777
806 -hsync -vsync (56.5 kHz)
(II) SIS(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777
806 -hsync -vsync (48.4 kHz)
(II) SIS(0): Modeline "832x624"x0.0 57.28 832 864 928 1152 624 625 628 667
-hsync -vsync (49.7 kHz)
(II) SIS(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625
+hsync +vsync (46.9 kHz)
(II) SIS(0): Modeline "800x600"x0.0 50.00 800 856 976 1040 600 637 643 666
+hsync +vsync (48.1 kHz)
(--) SIS(0): According to DDC size, CRT1 aspect ratio is 1.30:1 (normal)
(--) SIS(0): End of CRT1 DDC monitor info *************************************
(==) SIS(0): Min pixel clock is 10 MHz
(--) SIS(0): Max pixel clock is 400 MHz
(II) SIS(0): Replaced default mode list with built-in modes
(II) SIS(0): Using fake widescreen modes for CRT1 VGA devices
(II) SIS(0): Use option "ForceCRT1VGAAspect" to overrule
(II) SIS(0): "Unknown reason" in the following list means that the mode
(II) SIS(0): is not supported on the chipset/bridge/current output device.
(II) SIS(0): Configured Monitor: Using hsync range of 30.00-61.00 kHz
(II) SIS(0): Configured Monitor: Using vrefresh range of 56.00-76.00 Hz
(II) SIS(0): Configured Monitor: Using maximum pixel clock of 80.00 MHz
(II) SIS(0): Estimated virtual size for aspect ratio 1.3043 is 1024x768
(II) SIS(0): Clock range: 10.00 to 400.00 MHz
(II) SIS(0): Not using default mode "800x600" (vrefresh out of range)
(II) SIS(0): Not using default mode "800x600" (hsync out of range)
(II) SIS(0): Not using default mode "800x600" (hsync out of range)
(II) SIS(0): Not using default mode "800x600" (hsync out of range)
(II) SIS(0): Not using default mode "640x480" (vrefresh out of range)
(II) SIS(0): Not using default mode "640x480" (vrefresh out of range)
(II) SIS(0): Not using default mode "640x480" (hsync out of range)
(II) SIS(0): Not using default mode "640x480" (hsync out of range)
(II) SIS(0): Not using default mode "640x480" (hsync out of range)
(II) SIS(0): Not using default mode "1024x768" (vrefresh out of range)
(II) SIS(0): Not using default mode "1024x768" (hsync out of range)
(II) SIS(0): Not using default mode "1024x768" (hsync out of range)
(II) SIS(0): Not using default mode "1024x768" (hsync out of range)
(II) SIS(0): Not using default mode "1280x1024" (width too large for virtual
size)
(II) SIS(0): Not using default mode "1280x1024" (width too large for virtual
size)
(II) SIS(0): Not using default mode "1280x1024" (width too large for virtual
size)
(II) SIS(0): Not using default mode "1280x1024" (width too large for virtual
size)
(II) SIS(0): Not using default mode "1600x1200" (width too large for virtual
size)
(II) SIS(0): Not using default mode "1600x1200" (width too large for virtual
size)
(II) SIS(0): Not using default mode "1600x1200" (width too large for virtual
size)
(II) SIS(0): Not using default mode "1600x1200" (width too large for virtual
size)
(II) SIS(0): Not using default mode "1600x1200" (width too large for virtual
size)
(II) SIS(0): Not using default mode "1600x1200" (width too large for virtual
size)
(II) SIS(0): Not using default mode "1600x1200" (width too large for virtual
size)
(II) SIS(0): Not using default mode "1920x1440" (width too large for virtual
size)
(II) SIS(0): Not using default mode "1920x1440" (width too large for virtual
size)
(II) SIS(0): Not using default mode "1920x1440" (width too large for virtual
size)
(II) SIS(0): Not using default mode "1920x1440" (width too large for virtual
size)
(II) SIS(0): Not using default mode "1920x1440" (width too large for virtual
size)
(II) SIS(0): Not using default mode "1920x1440" (width too large for virtual
size)
(II) SIS(0): Not using default mode "2048x1536" (width too large for virtual
size)
(II) SIS(0): Not using default mode "2048x1536" (width too large for virtual
size)
(II) SIS(0): Not using default mode "2048x1536" (width too large for virtual
size)
(II) SIS(0): Not using default mode "2048x1536" (width too large for virtual
size)
(II) SIS(0): Not using default mode "2048x1536" (width too large for virtual
size)
(II) SIS(0): Not using default mode "800x480" (vrefresh out of range)
(II) SIS(0): Not using default mode "1024x576" (hsync out of range)
(II) SIS(0): Not using default mode "1280x720" (width too large for virtual
size)
(II) SIS(0): Not using default mode "1280x720" (width too large for virtual
size)
(II) SIS(0): Not using default mode "1280x720" (width too large for virtual
size)
(II) SIS(0): Not using default mode "1280x960" (width too large for virtual
size)
(II) SIS(0): Not using default mode "1280x960" (width too large for virtual
size)
(II) SIS(0): Not using default mode "1280x768" (width too large for virtual
size)
(II) SIS(0): Not using default mode "1280x768" (width too large for virtual
size)
(II) SIS(0): Not using default mode "1280x768" (width too large for virtual
size)
(II) SIS(0): Not using default mode "1400x1050" (width too large for virtual
size)
(II) SIS(0): Not using default mode "1400x1050" (width too large for virtual
size)
(II) SIS(0): Not using default mode "1152x864" (width too large for virtual
size)
(II) SIS(0): Not using default mode "1152x864" (width too large for virtual
size)
(II) SIS(0): Not using default mode "1152x864" (width too large for virtual
size)
(II) SIS(0): Not using default mode "1360x768" (width too large for virtual
size)
(II) SIS(0): Not using default mode "1280x800" (width too large for virtual
size)
(II) SIS(0): Not using default mode "1280x800" (width too large for virtual
size)
(II) SIS(0): Not using default mode "1280x800" (width too large for virtual
size)
(II) SIS(0): Not using default mode "1680x1050" (width too large for virtual
size)
(II) SIS(0): Not using default mode "1920x1080" (width too large for virtual
size)
(II) SIS(0): Not using default mode "1280x854" (width too large for virtual
size)
(II) SIS(0): Not using default mode "1280x854" (width too large for virtual
size)
(II) SIS(0): Not using default mode "1280x854" (width too large for virtual
size)
(--) SIS(0): Virtual size is 1024x768 (pitch 1024)
(**) SIS(0): *Driver mode "1024x768": 65.0 MHz, 48.4 kHz, 60.0 Hz
(II) SIS(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777
806 -hsync -vsync (48.4 kHz)
(**) SIS(0): *Driver mode "1024x768": 78.8 MHz, 60.0 kHz, 75.0 Hz
(II) SIS(0): Modeline "1024x768"x75.0 78.75 1024 1040 1136 1312 768 769 772
800 +hsync +vsync (60.0 kHz)
(**) SIS(0): *Driver mode "1024x768": 75.0 MHz, 56.5 kHz, 70.1 Hz
(II) SIS(0): Modeline "1024x768"x70.1 75.00 1024 1048 1184 1328 768 771 777
806 -hsync -vsync (56.5 kHz)
(**) SIS(0): *Driver mode "1024x768": 65.0 MHz, 48.4 kHz, 60.0 Hz
(II) SIS(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777
806 -hsync -vsync (48.4 kHz)
(**) SIS(0): *Default mode "1024x768": 78.7 MHz, 60.0 kHz, 75.0 Hz
(II) SIS(0): Modeline "1024x768"x75.0 78.75 1024 1040 1136 1312 768 769 772
800 +hsync +vsync (60.0 kHz)
(**) SIS(0): *Default mode "1024x768": 75.2 MHz, 56.6 kHz, 70.2 Hz
(II) SIS(0): Modeline "1024x768"x70.2 75.17 1024 1048 1184 1328 768 771 777
806 -hsync -vsync (56.6 kHz)
(**) SIS(0): *Default mode "1024x768": 65.1 MHz, 48.5 kHz, 60.1 Hz
(II) SIS(0): Modeline "1024x768"x60.1 65.15 1024 1048 1184 1344 768 771 777
806 -hsync -vsync (48.5 kHz)
(**) SIS(0): *Default mode "1024x576": 78.7 MHz, 60.0 kHz, 75.0 Hz
(II) SIS(0): Modeline "1024x576"x75.0 78.75 1024 1040 1136 1312 576 686 690
800 +hsync +vsync (60.0 kHz)
(**) SIS(0): *Default mode "1024x576": 65.1 MHz, 48.5 kHz, 60.1 Hz
(II) SIS(0): Modeline "1024x576"x60.1 65.15 1024 1048 1184 1344 576 688 694
806 +hsync +vsync (48.5 kHz)
(**) SIS(0): *Default mode "960x600": 41.5 MHz, 37.1 kHz, 60.0 Hz
(II) SIS(0): Modeline "960x600"x60.0 41.50 960 1008 1088 1120 600 603 609
618 +hsync +vsync (37.1 kHz)
(**) SIS(0): *Driver mode "832x624": 57.3 MHz, 49.7 kHz, 74.6 Hz
(II) SIS(0): Modeline "832x624"x74.6 57.28 832 864 928 1152 624 625 628 667
-hsync -vsync (49.7 kHz)
(**) SIS(0): *Default mode "960x540": 37.3 MHz, 33.8 kHz, 60.0 Hz
(II) SIS(0): Modeline "960x540"x60.0 37.29 960 976 1008 1104 540 543 549
563 +hsync +vsync (33.8 kHz)
(**) SIS(0): *Driver mode "800x600": 49.5 MHz, 46.9 kHz, 75.0 Hz
(II) SIS(0): Modeline "800x600"x75.0 49.50 800 816 896 1056 600 601 604 625
+hsync +vsync (46.9 kHz)
(**) SIS(0): *Driver mode "800x600": 50.0 MHz, 48.1 kHz, 72.2 Hz
(II) SIS(0): Modeline "800x600"x72.2 50.00 800 856 976 1040 600 637 643 666
+hsync +vsync (48.1 kHz)
(**) SIS(0): *Driver mode "800x600": 40.0 MHz, 37.9 kHz, 60.3 Hz
(II) SIS(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628
+hsync +vsync (37.9 kHz)
(**) SIS(0): *Driver mode "800x600": 36.0 MHz, 35.2 kHz, 56.2 Hz
(II) SIS(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625
+hsync +vsync (35.2 kHz)
(**) SIS(0): *Default mode "800x600": 49.5 MHz, 46.9 kHz, 75.0 Hz
(II) SIS(0): Modeline "800x600"x75.0 49.52 800 816 896 1056 600 601 604 625
+hsync +vsync (46.9 kHz)
(**) SIS(0): *Default mode "800x600": 50.1 MHz, 48.2 kHz, 72.4 Hz
(II) SIS(0): Modeline "800x600"x72.4 50.11 800 856 976 1040 600 637 643 666
+hsync +vsync (48.2 kHz)
(**) SIS(0): *Default mode "800x600": 40.0 MHz, 37.9 kHz, 60.3 Hz
(II) SIS(0): Modeline "800x600"x60.3 39.97 800 840 968 1056 600 601 605 628
+hsync +vsync (37.9 kHz)
(**) SIS(0): *Default mode "800x600": 36.1 MHz, 35.2 kHz, 56.3 Hz
(II) SIS(0): Modeline "800x600"x56.3 36.06 800 824 896 1024 600 601 603 625
+hsync +vsync (35.2 kHz)
(**) SIS(0): *Default mode "768x576": 35.0 MHz, 35.9 kHz, 60.1 Hz
(II) SIS(0): Modeline "768x576"x60.1 35.00 768 792 872 976 576 578 581 597
+hsync +vsync (35.9 kHz)
(**) SIS(0): *Default mode "720x576": 32.7 MHz, 35.9 kHz, 60.1 Hz
(II) SIS(0): Modeline "720x576"x60.1 32.73 720 744 816 912 576 578 581 597
+hsync +vsync (35.9 kHz)
(**) SIS(0): *Default mode "856x480": 33.9 MHz, 31.7 kHz, 59.8 Hz
(II) SIS(0): Modeline "856x480"x59.8 33.94 856 872 1000 1072 480 492 495
529 -hsync -vsync (31.7 kHz)
(**) SIS(0): *Default mode "856x480": 33.9 MHz, 30.5 kHz, 76.5 Hz (I)
(II) SIS(0): Modeline "856x480"x76.5 33.94 856 904 1048 1112 480 672 680
797 interlace +hsync +vsync (30.5 kHz)
(**) SIS(0): *Default mode "848x480": 33.7 MHz, 31.0 kHz, 60.0 Hz
(II) SIS(0): Modeline "848x480"x60.0 33.75 848 864 976 1088 480 486 494 517
-hsync -vsync (31.0 kHz)
(**) SIS(0): *Default mode "848x480": 33.9 MHz, 30.5 kHz, 76.5 Hz (I)
(II) SIS(0): Modeline "848x480"x76.5 33.94 848 904 1048 1112 480 672 680
797 interlace +hsync +vsync (30.5 kHz)
(**) SIS(0): *Default mode "800x480": 49.5 MHz, 46.9 kHz, 75.1 Hz
(II) SIS(0): Modeline "800x480"x75.1 49.52 800 816 896 1056 480 551 554 624
+hsync +vsync (46.9 kHz)
(**) SIS(0): *Default mode "800x480": 39.8 MHz, 37.7 kHz, 60.0 Hz
(II) SIS(0): Modeline "800x480"x60.0 39.77 800 840 968 1056 480 552 556 628
+hsync +vsync (37.7 kHz)
(**) SIS(0): *Default mode "720x480": 28.3 MHz, 31.6 kHz, 61.0 Hz
(II) SIS(0): Modeline "720x480"x61.0 28.28 720 728 840 896 480 490 492 517
-hsync -vsync (31.6 kHz)
(**) SIS(0): *Driver mode "640x480": 31.5 MHz, 37.5 kHz, 75.0 Hz
(II) SIS(0): Modeline "640x480"x75.0 31.50 640 656 720 840 480 481 484 500
-hsync -vsync (37.5 kHz)
(**) SIS(0): *Driver mode "640x480": 31.5 MHz, 37.9 kHz, 72.8 Hz
(II) SIS(0): Modeline "640x480"x72.8 31.50 640 664 704 832 480 489 492 520
-hsync -vsync (37.9 kHz)
(**) SIS(0): *Driver mode "640x480": 30.2 MHz, 35.0 kHz, 66.7 Hz
(II) SIS(0): Modeline "640x480"x66.7 30.24 640 704 768 864 480 483 486 525
-hsync -vsync (35.0 kHz)
(**) SIS(0): *Driver mode "640x480": 25.2 MHz, 31.5 kHz, 59.9 Hz
(II) SIS(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 490 492 525
-hsync -vsync (31.5 kHz)
(**) SIS(0): *Default mode "640x480": 31.5 MHz, 37.5 kHz, 75.0 Hz
(II) SIS(0): Modeline "640x480"x75.0 31.50 640 656 720 840 480 481 484 500
-hsync -vsync (37.5 kHz)
(**) SIS(0): *Default mode "640x480": 31.5 MHz, 37.9 kHz, 72.8 Hz
(II) SIS(0): Modeline "640x480"x72.8 31.50 640 664 704 832 480 489 491 520
-hsync -vsync (37.9 kHz)
(**) SIS(0): *Default mode "640x480": 25.1 MHz, 31.3 kHz, 59.7 Hz
(II) SIS(0): Modeline "640x480"x59.7 25.06 640 656 752 800 480 490 492 525
-hsync -vsync (31.3 kHz)
(**) SIS(0): *Driver mode "720x400": 28.3 MHz, 31.5 kHz, 70.1 Hz
(II) SIS(0): Modeline "720x400"x70.1 28.32 720 738 846 900 400 412 414 449
-hsync +vsync (31.5 kHz)
(**) SIS(0): *Default mode "640x400": 25.1 MHz, 31.6 kHz, 71.6 Hz
(II) SIS(0): Modeline "640x400"x71.6 25.06 640 656 752 792 400 413 415 442
-hsync +vsync (31.6 kHz)
(**) SIS(0): *Default mode "512x384": 32.6 MHz, 48.5 kHz, 60.1 Hz (D)
(II) SIS(0): Modeline "512x384"x60.1 32.57 512 528 592 672 384 385 388 403
doublescan -hsync -vsync (48.5 kHz)
(**) SIS(0): *Default mode "400x300": 20.0 MHz, 37.9 kHz, 60.3 Hz (D)
(II) SIS(0): Modeline "400x300"x60.3 19.98 400 416 480 528 300 300 302 314
doublescan +hsync +vsync (37.9 kHz)
(**) SIS(0): *Default mode "320x240": 12.5 MHz, 31.3 kHz, 60.7 Hz (D)
(II) SIS(0): Modeline "320x240"x60.7 12.53 320 328 376 400 240 245 246 258
doublescan -hsync -vsync (31.3 kHz)
(**) SIS(0): *Default mode "320x200": 12.5 MHz, 31.3 kHz, 70.9 Hz (D)
(II) SIS(0): Modeline "320x200"x70.9 12.53 320 328 376 400 200 206 207 221
doublescan -hsync +vsync (31.3 kHz)
(**) SIS(0): Display dimensions: (300, 230) mm
(**) SIS(0): DPI set to (86, 84)
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/lib/xorg/modules//libfb.so
(II) Module fb: vendor="X.Org Foundation"
compiled for 1.6.0, module version = 1.0.0
ABI class: X.Org ANSI C Emulation, version 0.4
(II) Loading sub module "xaa"
(II) LoadModule: "xaa"
(II) Loading /usr/lib/xorg/modules//libxaa.so
(II) Module xaa: vendor="X.Org Foundation"
compiled for 1.6.0, module version = 1.2.1
ABI class: X.Org Video Driver, version 5.0
(II) SIS(0): 2D acceleration enabled
(--) Depth 24 pixmap format is 32 bpp
(II) do I need RAC? No, I don't.
(II) resource ranges after preInit:
[0] -1 0 0xffffffff - 0xffffffff (0x1) MX[B]
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[4] 0 0 0x000a0000 - 0x000affff (0x10000) MS[B](OprU)
[5] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[B](OprU)
[6] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[B](OprU)
[7] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[8] -1 0 0x00000000 - 0x00000000 (0x1) IX[B]
[9] 0 0 0x000003b0 - 0x000003bb (0xc) IS[B](OprU)
[10] 0 0 0x000003c0 - 0x000003df (0x20) IS[B](OprU)
(II) Loading sub module "vbe"
(II) LoadModule: "vbe"
(II) Loading /usr/lib/xorg/modules//libvbe.so
(II) Module vbe: vendor="X.Org Foundation"
compiled for 1.6.0, module version = 1.1.0
ABI class: X.Org Video Driver, version 5.0
(II) Loading sub module "int10"
(II) LoadModule: "int10"
(II) Loading /usr/lib/xorg/modules//libint10.so
(II) Module int10: vendor="X.Org Foundation"
compiled for 1.6.0, module version = 1.0.0
ABI class: X.Org Video Driver, version 5.0
(II) SIS(0): initializing int10
(II) SIS(0): Primary V_BIOS segment is: 0xc000
(II) SIS(0): VESA BIOS detected
(II) SIS(0): VESA VBE Version 3.0
(II) SIS(0): VESA VBE Total Mem: 32768 kB
(II) SIS(0): VESA VBE OEM: SiS
(II) SIS(0): VESA VBE OEM Software Rev: 1.0
(II) SIS(0): VESA VBE OEM Vendor:
(II) SIS(0): VESA VBE OEM Product:
(II) SIS(0): VESA VBE OEM Product Rev:
(II) SIS(0): Setting custom mode 1024x768 on CRT1
(II) SIS(0): Setting custom mode 1024x768 on CRT2
(II) SIS(0): RENDER acceleration enabled
(II) SIS(0): Framebuffer from (0,0) to (1023,8046)
(II) SIS(0): Using XFree86 Acceleration Architecture (XAA)
Screen to screen bit blits
Solid filled rectangles
8x8 mono pattern filled rectangles
8x8 color pattern filled rectangles
Solid Lines
Dashed Lines
Setting up tile and stipple cache:
32 128x128 slots
32 256x256 slots
16 512x512 slots
32 8x8 color pattern slots
(--) SIS(0): CPU frequency 2600.18Mhz
(II) SIS(0): Benchmarking system RAM to video RAM memory transfer methods:
(--) SIS(0): Checked libc memcpy()... 16.4 MiB/s
(--) SIS(0): Checked built-in-1 memcpy()... 15.3 MiB/s
(--) SIS(0): Checked built-in-2 memcpy()... 12.3 MiB/s
(--) SIS(0): Checked MMX memcpy()... 34.0 MiB/s
(--) SIS(0): Checked MMX2 memcpy()... 34.9 MiB/s
(--) SIS(0): Using MMX2 method for aligned data transfers to video RAM
(--) SIS(0): Using MMX2 method for unaligned data transfers to video RAM
(==) SIS(0): Backing store disabled
(==) SIS(0): Silken mouse enabled
(II) SIS(0): DPMS enabled
(II) SIS(0): Using SiS300/315/330/340 series HW Xv
(II) SIS(0): Default Xv adaptor is Video Overlay
(II) SIS(0): Initialized SISCTRL extension version 0.1
(II) SIS(0): Registered screen 0 with SISCTRL extension version 0.1
(==) RandR enabled
(II) Initializing built-in extension Generic Event Extension
(II) Initializing built-in extension SHAPE
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension BIG-REQUESTS
(II) Initializing built-in extension SYNC
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension XC-MISC
(II) Initializing built-in extension SECURITY
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFIXES
(II) Initializing built-in extension RENDER
(II) Initializing built-in extension RANDR
(II) Initializing built-in extension COMPOSITE
(II) Initializing built-in extension DAMAGE
(II) AIGLX: Screen 0 is not DRI2 capable
(II) AIGLX: Screen 0 is not DRI capable
(II) AIGLX: Loaded and initialized /usr/lib/dri/swrast_dri.so
(II) GLX: Initialized DRISWRAST GL provider for screen 0
(II) config/hal: Adding input device AT Translated Set 2 keyboard
(II) LoadModule: "evdev"
(II) Loading /usr/lib/xorg/modules/input//evdev_drv.so
(II) Module evdev: vendor="X.Org Foundation"
compiled for 1.6.0, module version = 2.1.1
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 4.0
(**) AT Translated Set 2 keyboard: always reports core events
(**) AT Translated Set 2 keyboard: Device: "/dev/input/event4"
(II) AT Translated Set 2 keyboard: Found keys
(II) AT Translated Set 2 keyboard: Configuring as keyboard
(II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type:
KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) AT Translated Set 2 keyboard: xkb_rules: "evdev"
(**) Option "xkb_model" "pc105"
(**) AT Translated Set 2 keyboard: xkb_model: "pc105"
(**) Option "xkb_layout" "de"
(**) AT Translated Set 2 keyboard: xkb_layout: "de"
(II) config/hal: Adding input device GenPS/2 Genius Mouse
(**) GenPS/2 Genius Mouse: always reports core events
(**) GenPS/2 Genius Mouse: Device: "/dev/input/event8"
(II) GenPS/2 Genius Mouse: Found 5 mouse buttons
(II) GenPS/2 Genius Mouse: Found x and y relative axes
(II) GenPS/2 Genius Mouse: Configuring as mouse
(**) GenPS/2 Genius Mouse: YAxisMapping: buttons 4 and 5
(**) GenPS/2 Genius Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10,
EmulateWheelTimeout: 200
(II) XINPUT: Adding extended input device "GenPS/2 Genius Mouse" (type: MOUSE)
(**) GenPS/2 Genius Mouse: (accel) keeping acceleration scheme 1
(**) GenPS/2 Genius Mouse: (accel) filter chain progression: 2.00
(**) GenPS/2 Genius Mouse: (accel) filter stage 0: 20.00 ms
(**) GenPS/2 Genius Mouse: (accel) set acceleration profile 0
(II) config/hal: Adding input device cx88 IR (Hauppauge WinTV 34xxx
(**) cx88 IR (Hauppauge WinTV 34xxx: always reports core events
(**) cx88 IR (Hauppauge WinTV 34xxx: Device: "/dev/input/event7"
(II) cx88 IR (Hauppauge WinTV 34xxx: Found keys
(II) cx88 IR (Hauppauge WinTV 34xxx: Configuring as keyboard
(II) XINPUT: Adding extended input device "cx88 IR (Hauppauge WinTV 34xxx"
(type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) cx88 IR (Hauppauge WinTV 34xxx: xkb_rules: "evdev"
(**) Option "xkb_model" "pc105"
(**) cx88 IR (Hauppauge WinTV 34xxx: xkb_model: "pc105"
(**) Option "xkb_layout" "de"
(**) cx88 IR (Hauppauge WinTV 34xxx: xkb_layout: "de"
(II) config/hal: Adding input device Macintosh mouse button emulation
(**) Macintosh mouse button emulation: always reports core events
(**) Macintosh mouse button emulation: Device: "/dev/input/event3"
(II) Macintosh mouse button emulation: Found 3 mouse buttons
(II) Macintosh mouse button emulation: Found x and y relative axes
(II) Macintosh mouse button emulation: Configuring as mouse
(**) Macintosh mouse button emulation: YAxisMapping: buttons 4 and 5
(**) Macintosh mouse button emulation: EmulateWheelButton: 4,
EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(II) XINPUT: Adding extended input device "Macintosh mouse button emulation"
(type: MOUSE)
(**) Macintosh mouse button emulation: (accel) keeping acceleration scheme 1
(**) Macintosh mouse button emulation: (accel) filter chain progression: 2.00
(**) Macintosh mouse button emulation: (accel) filter stage 0: 20.00 ms
(**) Macintosh mouse button emulation: (accel) set acceleration profile 0
(II) SIS(0): Setting standard mode 0x3e
--
Videomodus 1024x768 not working
https://bugs.launchpad.net/bugs/395831
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
--
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
