hello , I am sorry for this lateness my uname -a Linux faouzi-laptop 2.6.24-24-generic #1 SMP Fri Jul 24 22:46:06 UTC 2009 i686 GNU/Linux my dmesg
[ 0.000000] ACPI: RSDP signature @ 0xC00F8070 checksum 0 [ 0.000000] ACPI: RSDP 000F8070, 0014 (r0 ACPIAM) [ 0.000000] ACPI: RSDT 77FA0000, 003C (r1 _ASUS_ Notebook 12000721 MSFT 97) [ 0.000000] ACPI: FACP 77FA0200, 0084 (r2 A_M_I_ OEMFACP 12000721 MSFT 97) [ 0.000000] ACPI: DSDT 77FA0630, 7590 (r1 A0669 A0669000 0 INTL 20060113) [ 0.000000] ACPI: FACS 77FAE000, 0040 [ 0.000000] ACPI: APIC 77FA0390, 005C (r1 A_M_I_ OEMAPIC 12000721 MSFT 97) [ 0.000000] ACPI: MCFG 77FA03F0, 003C (r1 A_M_I_ OEMMCFG 12000721 MSFT 97) [ 0.000000] ACPI: SLIC 77FA0430, 0176 (r1 _ASUS_ Notebook 12000721 MSFT 97) [ 0.000000] ACPI: BOOT 77FA0600, 0028 (r1 A_M_I_ OEMBOOT 12000721 MSFT 97) [ 0.000000] ACPI: OEMB 77FAE040, 005B (r1 A_M_I_ AMI_OEM 12000721 MSFT 97) [ 0.000000] ATI board detected. Disabling timer routing over 8254. [ 0.000000] ACPI: PM-Timer IO Port: 0x808 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) [ 0.000000] Processor #0 6:14 APIC version 20 [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled) [ 0.000000] Processor #1 6:14 APIC version 20 [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 2, version 33, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] Allocating PCI resources starting at 80000000 (gap: 78000000:86e00000) [ 0.000000] swsusp: Registered nosave memory region: 000000000009f000 - 00000000000a0000 [ 0.000000] swsusp: Registered nosave memory region: 00000000000a0000 - 00000000000e0000 [ 0.000000] swsusp: Registered nosave memory region: 00000000000e0000 - 0000000000100000 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 487585 [ 0.000000] Kernel command line: root=UUID=b762a70c-895d-4141-a7a0-790cb511b643 ro quiet splash [ 0.000000] mapped APIC to ffffb000 (fee00000) [ 0.000000] mapped IOAPIC to ffffa000 (fec00000) [ 0.000000] Enabling fast FPU save and restore... done. [ 0.000000] Enabling unmasked SIMD FPU exception support... done. [ 0.000000] Initializing CPU#0 [ 0.000000] PID hash table entries: 4096 (order: 12, 16384 bytes) [ 0.000000] Detected 1862.256 MHz processor. [ 27.406061] Console: colour VGA+ 80x25 [ 27.406069] console [tty0] enabled [ 27.407061] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 27.408074] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 27.631930] Memory: 1936892k/1965696k available (2181k kernel code, 27668k reserved, 1006k data, 368k init, 1048192k highmem) [ 27.631947] virtual kernel memory layout: [ 27.631950] fixmap : 0xfff4b000 - 0xfffff000 ( 720 kB) [ 27.631953] pkmap : 0xff800000 - 0xffc00000 (4096 kB) [ 27.631956] vmalloc : 0xf8800000 - 0xff7fe000 ( 111 MB) [ 27.631958] lowmem : 0xc0000000 - 0xf8000000 ( 896 MB) [ 27.631961] .init : 0xc0423000 - 0xc047f000 ( 368 kB) [ 27.631964] .data : 0xc0321538 - 0xc041cdc4 (1006 kB) [ 27.631967] .text : 0xc0100000 - 0xc0321538 (2181 kB) [ 27.631974] Checking if this processor honours the WP bit even in supervisor mode... Ok. [ 27.632061] SLUB: Genslabs=11, HWalign=64, Order=0-1, MinObjects=4, CPUs=2, Nodes=1 [ 27.711972] Calibrating delay using timer specific routine.. 3729.47 BogoMIPS (lpj=7458953) [ 27.712029] Security Framework initialized [ 27.712047] SELinux: Disabled at boot. [ 27.712079] AppArmor: AppArmor initialized [ 27.712087] Failure registering capabilities with primary security module. [ 27.712105] Mount-cache hash table entries: 512 [ 27.712363] Initializing cgroup subsys ns [ 27.712374] Initializing cgroup subsys cpuacct [ 27.712396] CPU: After generic identify, caps: bfe9fbff 00100000 00000000 00000000 0000c189 00000000 00000000 00000000 [ 27.712413] monitor/mwait feature present. [ 27.712417] using mwait in idle threads. [ 27.712425] CPU: L1 I cache: 32K, L1 D cache: 32K [ 27.712430] CPU: L2 cache: 1024K [ 27.712435] CPU: Physical Processor ID: 0 [ 27.712439] CPU: Processor Core ID: 0 [ 27.712446] CPU: After all inits, caps: bfe9fbff 00100000 00000000 00042940 0000c189 00000000 00000000 00000000 [ 27.712468] Compat vDSO mapped to ffffe000. [ 27.712497] Checking 'hlt' instruction... OK. [ 27.728708] SMP alternatives: switching to UP code [ 27.732326] Early unpacking initramfs... done [ 28.487271] ACPI: Core revision 20070126 [ 28.487412] ACPI: Looking for DSDT in initramfs... error, file /DSDT.aml not found. [ 28.499155] CPU0: Intel Genuine Intel(R) CPU T2130 @ 1.86GHz stepping 0c [ 28.499188] SMP alternatives: switching to SMP code [ 28.500503] Booting processor 1/1 eip 3000 [ 28.510746] Initializing CPU#1 [ 28.590559] Calibrating delay using timer specific routine.. 3724.68 BogoMIPS (lpj=7449363) [ 28.590573] CPU: After generic identify, caps: bfe9fbff 00100000 00000000 00000000 0000c189 00000000 00000000 00000000 [ 28.590584] monitor/mwait feature present. [ 28.590591] CPU: L1 I cache: 32K, L1 D cache: 32K [ 28.590595] CPU: L2 cache: 1024K [ 28.590599] CPU: Physical Processor ID: 0 [ 28.590602] CPU: Processor Core ID: 1 [ 28.590608] CPU: After all inits, caps: bfe9fbff 00100000 00000000 00042940 0000c189 00000000 00000000 00000000 [ 28.591341] CPU1: Intel Genuine Intel(R) CPU T2130 @ 1.86GHz stepping 0c [ 28.591382] Total of 2 processors activated (7454.15 BogoMIPS). [ 28.591567] ENABLING IO-APIC IRQs [ 28.591787] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 28.738541] checking TSC synchronization [CPU#0 -> CPU#1]: passed. [ 28.758540] Brought up 2 CPUs [ 28.758584] CPU0 attaching sched-domain: [ 28.758589] domain 0: span 03 [ 28.758594] groups: 01 02 [ 28.758601] CPU1 attaching sched-domain: [ 28.758604] domain 0: span 03 [ 28.758608] groups: 02 01 [ 28.759095] net_namespace: 64 bytes [ 28.759117] Booting paravirtualized kernel on bare hardware [ 28.760061] Time: 20:18:26 Date: 08/02/09 [ 28.760117] NET: Registered protocol family 16 [ 28.760545] EISA bus registered [ 28.760555] ACPI: bus type pci registered [ 28.760959] PCI: PCI BIOS revision 3.00 entry at 0xf0031, last bus=8 [ 28.760964] PCI: Using configuration type 1 [ 28.761004] Setting up standard PCI resources [ 28.770372] ACPI: EC: Look up EC in DSDT [ 28.791391] ACPI: Interpreter enabled [ 28.791397] ACPI: (supports S0 S1 S3 S4 S5) [ 28.791441] ACPI: Using IOAPIC for interrupt routing [ 28.807275] ACPI: EC: GPE = 0x11, I/O: command/status = 0x66, data = 0x62 [ 28.807281] ACPI: EC: driver started in poll mode [ 28.807566] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 28.808038] pci 0000:00:12.0: set SATA to AHCI mode [ 28.810125] PCI: Transparent bridge - 0000:00:14.4 [ 28.810196] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 28.810529] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT] [ 28.810888] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCE4._PRT] [ 28.811164] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCE6._PRT] [ 28.811431] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCE7._PRT] [ 28.811808] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCE5._PRT] [ 28.823145] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 *5 7 10 11 12) [ 28.823489] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 *10 11 12) [ 28.823829] ACPI: PCI Interrupt Link [LNKC] (IRQs *3 4 5 7 10 11 12) [ 28.824167] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 *10 11 12) [ 28.824505] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 10 11 12) *0, disabled. [ 28.824845] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 10 11 12) *0, disabled. [ 28.825184] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 10 *11 12) [ 28.825522] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 10 11 12) *0, disabled. [ 28.825839] Linux Plug and Play Support v0.97 (c) Adam Belay [ 28.825908] pnp: PnP ACPI init [ 28.825924] ACPI: bus type pnp registered [ 28.831128] pnp: PnP ACPI: found 11 devices [ 28.831134] ACPI: ACPI bus type pnp unregistered [ 28.831142] PnPBIOS: Disabled by ACPI PNP [ 28.831664] PCI: Using ACPI for IRQ routing [ 28.831670] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report [ 28.878130] NET: Registered protocol family 8 [ 28.878135] NET: Registered protocol family 20 [ 28.878267] AppArmor: AppArmor Filesystem Enabled [ 28.882110] Time: tsc clocksource has been installed. [ 28.894172] system 00:05: ioport range 0x4d0-0x4d1 has been reserved [ 28.894180] system 00:05: ioport range 0x40b-0x40b has been reserved [ 28.894190] system 00:05: ioport range 0x4d6-0x4d6 has been reserved [ 28.894196] system 00:05: ioport range 0xc00-0xc01 has been reserved [ 28.894202] system 00:05: ioport range 0xc14-0xc14 has been reserved [ 28.894209] system 00:05: ioport range 0xc50-0xc51 has been reserved [ 28.894215] system 00:05: ioport range 0xc52-0xc52 has been reserved [ 28.894221] system 00:05: ioport range 0xc6c-0xc6c has been reserved [ 28.894227] system 00:05: ioport range 0xc6f-0xc6f has been reserved [ 28.894233] system 00:05: ioport range 0xcd0-0xcd1 has been reserved [ 28.894239] system 00:05: ioport range 0xcd2-0xcd3 has been reserved [ 28.894246] system 00:05: ioport range 0xcd4-0xcd5 has been reserved [ 28.894252] system 00:05: ioport range 0xcd6-0xcd7 has been reserved [ 28.894258] system 00:05: ioport range 0xcd8-0xcdf has been reserved [ 28.894264] system 00:05: ioport range 0x800-0x89f has been reserved [ 28.894271] system 00:05: ioport range 0xb00-0xb1f could not be reserved [ 28.894277] system 00:05: ioport range 0x900-0x90f has been reserved [ 28.894283] system 00:05: ioport range 0x910-0x91f has been reserved [ 28.894290] system 00:05: ioport range 0xfe00-0xfefe has been reserved [ 28.894296] system 00:05: ioport range 0x4000-0x40fe has been reserved [ 28.894304] system 00:05: iomem range 0xfed45000-0xfed89fff has been reserved [ 28.894311] system 00:05: iomem range 0xffb80000-0xffbfffff could not be reserved [ 28.894318] system 00:05: iomem range 0xfff80000-0xffffffff could not be reserved [ 28.894334] system 00:08: ioport range 0x250-0x253 has been reserved [ 28.894341] system 00:08: ioport range 0x256-0x25f has been reserved [ 28.894348] system 00:08: iomem range 0xfec00000-0xfec00fff has been reserved [ 28.894355] system 00:08: iomem range 0xfee00000-0xfee00fff could not be reserved [ 28.894368] system 00:09: iomem range 0xe0000000-0xefffffff has been reserved [ 28.894381] system 00:0a: iomem range 0x0-0x9ffff could not be reserved [ 28.894387] system 00:0a: iomem range 0xc0000-0xcffff could not be reserved [ 28.894394] system 00:0a: iomem range 0xe0000-0xfffff could not be reserved [ 28.894401] system 00:0a: iomem range 0x100000-0x77ffffff could not be reserved [ 28.894407] system 00:0a: iomem range 0x0-0x0 could not be reserved [ 28.925269] PCI: Bridge: 0000:00:01.0 [ 28.925275] IO window: 9000-9fff [ 28.925282] MEM window: fa800000-fa8fffff [ 28.925289] PREFETCH window: 9ff00000-bfefffff [ 28.925296] PCI: Bridge: 0000:00:04.0 [ 28.925299] IO window: disabled. [ 28.925306] MEM window: fa900000-fa9fffff [ 28.925311] PREFETCH window: disabled. [ 28.925318] PCI: Bridge: 0000:00:05.0 [ 28.925323] IO window: a000-bfff [ 28.925330] MEM window: faa00000-fe9fffff [ 28.925336] PREFETCH window: bff00000-dfefffff [ 28.925343] PCI: Bridge: 0000:00:06.0 [ 28.925346] IO window: disabled. [ 28.925353] MEM window: fea00000-feafffff [ 28.925358] PREFETCH window: disabled. [ 28.925365] PCI: Bridge: 0000:00:07.0 [ 28.925368] IO window: disabled. [ 28.925374] MEM window: disabled. [ 28.925379] PREFETCH window: disabled. [ 28.925386] PCI: Bridge: 0000:00:14.4 [ 28.925389] IO window: disabled. [ 28.925398] MEM window: disabled. [ 28.925405] PREFETCH window: disabled. [ 28.925445] PCI: Setting latency timer of device 0000:00:04.0 to 64 [ 28.925464] PCI: Setting latency timer of device 0000:00:05.0 to 64 [ 28.925482] PCI: Setting latency timer of device 0000:00:06.0 to 64 [ 28.925500] PCI: Setting latency timer of device 0000:00:07.0 to 64 [ 28.925531] NET: Registered protocol family 2 [ 28.962115] IP route cache hash table entries: 32768 (order: 5, 131072 bytes) [ 28.962639] TCP established hash table entries: 131072 (order: 8, 1048576 bytes) [ 28.964246] TCP bind hash table entries: 65536 (order: 7, 524288 bytes) [ 28.965260] TCP: Hash tables configured (established 131072 bind 65536) [ 28.965267] TCP reno registered [ 28.974288] checking if image is initramfs...<7>Switched to high resolution mode on CPU 1 [ 29.425231] Switched to high resolution mode on CPU 0 [ 29.700382] it is [ 30.479820] Freeing initrd memory: 7313k freed [ 30.480154] Simple Boot Flag at 0xff set to 0x1 [ 30.481594] audit: initializing netlink socket (disabled) [ 30.481623] audit(1249244307.720:1): initialized [ 30.482043] highmem bounce pool size: 64 pages [ 30.486417] VFS: Disk quotas dquot_6.5.1 [ 30.486595] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 30.486868] io scheduler noop registered [ 30.486873] io scheduler anticipatory registered [ 30.486877] io scheduler deadline registered [ 30.486903] io scheduler cfq registered (default) [ 30.487050] Boot video device is 0000:01:05.0 [ 30.487285] PCI: Setting latency timer of device 0000:00:04.0 to 64 [ 30.487343] assign_interrupt_mode Found MSI capability [ 30.487401] Allocate Port Service[0000:00:04.0:pcie00] [ 30.487567] PCI: Setting latency timer of device 0000:00:05.0 to 64 [ 30.487623] assign_interrupt_mode Found MSI capability [ 30.487675] Allocate Port Service[0000:00:05.0:pcie00] [ 30.487821] PCI: Setting latency timer of device 0000:00:06.0 to 64 [ 30.487877] assign_interrupt_mode Found MSI capability [ 30.487928] Allocate Port Service[0000:00:06.0:pcie00] [ 30.488073] PCI: Setting latency timer of device 0000:00:07.0 to 64 [ 30.488129] assign_interrupt_mode Found MSI capability [ 30.488181] Allocate Port Service[0000:00:07.0:pcie00] [ 30.488678] isapnp: Scanning for PnP cards... [ 30.843500] isapnp: No Plug & Play device found [ 30.903922] Real Time Clock Driver v1.12ac [ 30.904140] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled [ 30.906736] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize [ 30.906912] input: Macintosh mouse button emulation as /devices/virtual/input/input0 [ 30.907134] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12 [ 30.910286] i8042.c: Detected active multiplexing controller, rev 1.1. [ 30.911629] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 30.911639] serio: i8042 AUX0 port at 0x60,0x64 irq 12 [ 30.911645] serio: i8042 AUX1 port at 0x60,0x64 irq 12 [ 30.911651] serio: i8042 AUX2 port at 0x60,0x64 irq 12 [ 30.911656] serio: i8042 AUX3 port at 0x60,0x64 irq 12 [ 30.930882] mice: PS/2 mouse device common for all mice [ 30.931132] EISA: Probing bus 0 at eisa.0 [ 30.931165] Cannot allocate resource for EISA slot 4 [ 30.931196] EISA: Detected 0 cards. [ 30.931202] cpuidle: using governor ladder [ 30.931206] cpuidle: using governor menu [ 30.931384] NET: Registered protocol family 1 [ 30.931436] Using IPI No-Shortcut mode [ 30.931488] registered taskstats version 1 [ 30.931705] Magic number: 5:554:345 [ 30.931833] hash matches device tty62 [ 30.931881] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 30.931886] EDD information not available. [ 30.932342] Freeing unused kernel memory: 368k freed [ 30.932402] Write protecting the kernel read-only data: 802k [ 30.970661] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1 [ 32.397165] fuse init (API version 7.9) [ 32.438969] ACPI: SSDT 77FA7BC0, 0C99 (r1 AMI CPU1PM 1 INTL 20060113) [ 32.439563] ACPI: duty_cycle spans bit 4 [ 32.440193] ACPI: CPU0 (power states: C1[C1] C2[C2]) [ 32.440324] ACPI: SSDT 77FA8860, 0C99 (r1 AMI CPU2PM 1 INTL 20060113) [ 32.441554] ACPI: CPU1 (power states: C1[C1] C2[C2]) [ 32.444106] ACPI: EC: non-query interrupt received, switching to interrupt mode [ 32.451665] ACPI: Thermal Zone [THRM] (27 C) [ 33.208427] SCSI subsystem initialized [ 33.344710] usbcore: registered new interface driver usbfs [ 33.344759] usbcore: registered new interface driver hub [ 33.350645] libata version 3.00 loaded. [ 33.355681] usbcore: registered new device driver usb [ 33.355816] ahci 0000:00:12.0: version 3.0 [ 33.355868] ACPI: PCI Interrupt 0000:00:12.0[A] -> GSI 22 (level, low) -> IRQ 16 [ 33.355914] ahci 0000:00:12.0: controller can't do 64bit DMA, forcing 32bit [ 33.355919] ahci 0000:00:12.0: controller can't do PMP, turning off CAP_PMP [ 33.370844] ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver [ 34.357175] ahci 0000:00:12.0: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0xf impl SATA mode [ 34.357187] ahci 0000:00:12.0: flags: ncq sntf ilck led clo pio slum part [ 34.357767] scsi0 : ahci [ 34.358213] scsi1 : ahci [ 34.358515] scsi2 : ahci [ 34.358808] scsi3 : ahci [ 34.358984] ata1: SATA max UDMA/133 abar m1...@0xfebffc00 port 0xfebffd00 irq 16 [ 34.358993] ata2: SATA max UDMA/133 abar m1...@0xfebffc00 port 0xfebffd80 irq 16 [ 34.359000] ata3: SATA max UDMA/133 abar m1...@0xfebffc00 port 0xfebffe00 irq 16 [ 34.359007] ata4: SATA max UDMA/133 abar m1...@0xfebffc00 port 0xfebffe80 irq 16 [ 34.832359] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 34.833308] ata1.00: ATA-7: ST9120822AS, 3.ALC, max UDMA/133 [ 34.833316] ata1.00: 234441648 sectors, multi 16: LBA48 NCQ (depth 31/32) [ 34.834452] ata1.00: configured for UDMA/133 [ 35.143839] ata2: SATA link down (SStatus 0 SControl 300) [ 35.455329] ata3: SATA link down (SStatus 0 SControl 300) [ 35.766817] ata4: SATA link down (SStatus 0 SControl 300) [ 35.767110] scsi 0:0:0:0: Direct-Access ATA ST9120822AS 3.AL PQ: 0 ANSI: 5 [ 35.767877] ACPI: PCI Interrupt 0000:00:14.1[A] -> GSI 16 (level, low) -> IRQ 17 [ 35.767951] PCI: Setting latency timer of device 0000:00:14.1 to 64 [ 35.767977] ACPI: PCI interrupt for device 0000:00:14.1 disabled [ 35.769969] ACPI: PCI Interrupt 0000:00:13.0[A] -> GSI 16 (level, low) -> IRQ 17 [ 35.769991] ohci_hcd 0000:00:13.0: OHCI Host Controller [ 35.770400] ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 1 [ 35.770434] ohci_hcd 0000:00:13.0: irq 17, io mem 0xfebfe000 [ 35.787623] Driver 'sd' needs updating - please use bus_type methods [ 35.787789] sd 0:0:0:0: [sda] 234441648 512-byte hardware sectors (120034 MB) [ 35.787817] sd 0:0:0:0: [sda] Write Protect is off [ 35.787823] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 35.787861] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 35.787957] sd 0:0:0:0: [sda] 234441648 512-byte hardware sectors (120034 MB) [ 35.787981] sd 0:0:0:0: [sda] Write Protect is off [ 35.787986] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 35.788023] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 35.788031] sda: sda1 < sda5 > sda2 sda3 [ 35.827960] usb usb1: configuration #1 chosen from 1 choice [ 35.828014] hub 1-0:1.0: USB hub found [ 35.828030] hub 1-0:1.0: 2 ports detected [ 35.830752] sd 0:0:0:0: [sda] Attached SCSI disk [ 35.842028] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 35.930741] ACPI: PCI Interrupt 0000:00:13.1[B] -> GSI 17 (level, low) -> IRQ 18 [ 35.930773] ohci_hcd 0000:00:13.1: OHCI Host Controller [ 35.930833] ohci_hcd 0000:00:13.1: new USB bus registered, assigned bus number 2 [ 35.930867] ohci_hcd 0000:00:13.1: irq 18, io mem 0xfebfd000 [ 35.991669] usb usb2: configuration #1 chosen from 1 choice [ 35.991727] hub 2-0:1.0: USB hub found [ 35.991744] hub 2-0:1.0: 2 ports detected [ 36.095451] ACPI: PCI Interrupt 0000:00:13.2[C] -> GSI 18 (level, low) -> IRQ 19 [ 36.095481] ohci_hcd 0000:00:13.2: OHCI Host Controller [ 36.095535] ohci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 3 [ 36.095566] ohci_hcd 0000:00:13.2: irq 19, io mem 0xfebfc000 [ 36.155380] usb usb3: configuration #1 chosen from 1 choice [ 36.155436] hub 3-0:1.0: USB hub found [ 36.155452] hub 3-0:1.0: 2 ports detected [ 36.258193] ACPI: PCI Interrupt 0000:00:13.3[B] -> GSI 17 (level, low) -> IRQ 18 [ 36.258226] ohci_hcd 0000:00:13.3: OHCI Host Controller [ 36.258279] ohci_hcd 0000:00:13.3: new USB bus registered, assigned bus number 4 [ 36.258305] ohci_hcd 0000:00:13.3: irq 18, io mem 0xfebfb000 [ 36.319083] usb usb4: configuration #1 chosen from 1 choice [ 36.319139] hub 4-0:1.0: USB hub found [ 36.319155] hub 4-0:1.0: 2 ports detected [ 36.421855] ACPI: PCI Interrupt 0000:00:13.4[C] -> GSI 18 (level, low) -> IRQ 19 [ 36.421875] ohci_hcd 0000:00:13.4: OHCI Host Controller [ 36.421922] ohci_hcd 0000:00:13.4: new USB bus registered, assigned bus number 5 [ 36.421944] ohci_hcd 0000:00:13.4: irq 19, io mem 0xfebfa000 [ 36.481807] usb usb5: configuration #1 chosen from 1 choice [ 36.481864] hub 5-0:1.0: USB hub found [ 36.481879] hub 5-0:1.0: 2 ports detected [ 36.582146] ACPI: PCI Interrupt 0000:00:14.1[A] -> GSI 16 (level, low) -> IRQ 17 [ 36.584682] scsi4 : pata_atiixp [ 36.586430] scsi5 : pata_atiixp [ 36.588335] ata5: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xff00 irq 14 [ 36.588344] ata6: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xff08 irq 15 [ 36.905496] ata5.00: ATAPI: HL-DT-ST DVDRAM GSA-T20N, WR02, max UDMA/33 [ 37.077188] ata5.00: configured for UDMA/33 [ 37.236162] scsi 4:0:0:0: CD-ROM HL-DT-ST DVDRAM GSA-T20N WR02 PQ: 0 ANSI: 5 [ 37.236324] scsi 4:0:0:0: Attached scsi generic sg1 type 5 [ 37.236471] ACPI: PCI Interrupt 0000:00:13.5[D] -> GSI 19 (level, low) -> IRQ 20 [ 37.236496] ehci_hcd 0000:00:13.5: EHCI Host Controller [ 37.236554] ehci_hcd 0000:00:13.5: new USB bus registered, assigned bus number 6 [ 37.236631] ehci_hcd 0000:00:13.5: debug port 1 [ 37.236660] ehci_hcd 0000:00:13.5: irq 20, io mem 0xfebff800 [ 37.249372] ehci_hcd 0000:00:13.5: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 [ 37.249614] usb usb6: configuration #1 chosen from 1 choice [ 37.249669] hub 6-0:1.0: USB hub found [ 37.249683] hub 6-0:1.0: 10 ports detected [ 37.367978] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 [ 37.367988] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx [ 37.397244] Driver 'sr' needs updating - please use bus_type methods [ 37.415081] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray [ 37.415090] Uniform CD-ROM driver Revision: 3.20 [ 37.415199] sr 4:0:0:0: Attached scsi CD-ROM sr0 [ 37.703733] Attempting manual resume [ 37.703740] swsusp: Resume From Partition 8:3 [ 37.703744] PM: Checking swsusp image. [ 37.703958] PM: Resume from disk failed. [ 37.731595] usb 6-4: new high speed USB device using ehci_hcd and address 2 [ 37.777727] kjournald starting. Commit interval 5 seconds [ 37.777747] EXT3-fs: mounted filesystem with ordered data mode. [ 37.888644] usb 6-4: configuration #1 chosen from 1 choice [ 38.127933] usb 6-7: new high speed USB device using ehci_hcd and address 3 [ 38.268561] usb 6-7: configuration #1 chosen from 1 choice [ 49.236909] input: PC Speaker as /devices/platform/pcspkr/input/input2 [ 49.779148] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 49.843868] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 49.955645] piix4_smbus 0000:00:14.0: Found 0000:00:14.0 device [ 50.027432] Linux agpgart interface v0.102 [ 50.578327] input: Power Button (FF) as /devices/virtual/input/input3 [ 50.622543] ACPI: Power Button (FF) [PWRF] [ 50.622779] input: Lid Switch as /devices/virtual/input/input4 [ 50.651742] ACPI: Lid Switch [LID] [ 50.651954] input: Power Button (CM) as /devices/virtual/input/input5 [ 50.702330] ACPI: Power Button (CM) [PWRB] [ 50.702454] input: Sleep Button (CM) as /devices/virtual/input/input6 [ 50.770259] ACPI: Sleep Button (CM) [SLPB] [ 50.770290] asus-laptop: Asus Laptop Support version 0.42 [ 50.770821] asus-laptop: F5R model detected [ 51.527686] ACPI: AC Adapter [AC0] (off-line) [ 51.688339] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A03:00/device:01/LNXVIDEO:00/input/input7 [ 51.717717] ACPI: Video Device [VGA] (multi-head: yes rom: no post: no) [ 52.013554] ieee80211_crypt: registered algorithm 'NULL' [ 52.047335] Attansic(R) L2 Ethernet Network Driver - version 1.0.40.2 [ 52.047343] Copyright (c) 2006 Attansic Corporation. [ 52.047498] ACPI: PCI Interrupt 0000:06:00.0[A] -> GSI 18 (level, low) -> IRQ 19 [ 52.047517] PCI: Setting latency timer of device 0000:06:00.0 to 64 [ 52.058636] wl: module license 'MIXED/Proprietary' taints kernel. [ 52.149860] ACPI: PCI Interrupt 0000:02:00.0[A] -> GSI 16 (level, low) -> IRQ 17 [ 52.149876] PCI: Setting latency timer of device 0000:02:00.0 to 64 [ 52.187811] ACPI: Battery Slot [BAT0] (battery present) [ 52.323672] ieee80211_crypt: registered algorithm 'TKIP' [ 52.323911] eth1: Broadcom BCM4311 802.11 Wireless Controller 5.10.91.9 [ 52.700568] [fglrx] Maximum main memory to use for locked dma buffers: 1777 MBytes. [ 52.700651] [fglrx] ASYNCIO init succeed! [ 52.701812] [fglrx] PAT is enabled successfully! [ 52.701875] [fglrx] module loaded - fglrx 8.47.3 [Feb 25 2008] on minor 0 [ 52.925525] ACPI: PCI Interrupt 0000:00:14.2[A] -> GSI 16 (level, low) -> IRQ 17 [ 53.121484] usbcore: registered new interface driver libusual [ 53.162516] Initializing USB Mass Storage driver... [ 53.162688] scsi6 : SCSI emulation for USB Mass Storage devices [ 53.162853] usbcore: registered new interface driver usb-storage [ 53.162861] USB Mass Storage support registered. [ 53.163036] usb-storage: device found at 2 [ 53.163040] usb-storage: waiting for device to settle before scanning [ 53.563654] Synaptics Touchpad, model: 1, fw: 6.1, id: 0xa3a0b3, caps: 0xa04713/0x10008 [ 53.609427] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio4/input/input8 [ 55.523621] lp: driver loaded but no devices found [ 55.594380] ndiswrapper version 1.52 loaded (smp=yes, preempt=no) [ 55.693798] usbcore: registered new interface driver ndiswrapper [ 55.781139] Adding 1984016k swap on /dev/sda3. Priority:-1 extents:1 across:1984016k [ 55.845857] EXT3 FS on sda5, internal journal [ 56.188409] kjournald starting. Commit interval 5 seconds [ 56.188730] EXT3 FS on sda2, internal journal [ 56.188741] EXT3-fs: mounted filesystem with ordered data mode. [ 57.098706] ip_tables: (C) 2000-2006 Netfilter Core Team [ 57.980992] No dock devices found. [ 58.157366] usb-storage: device scan complete [ 58.164697] scsi 6:0:0:0: Direct-Access Generic- xD/SDMMC/MS/Pro 1.00 PQ: 0 ANSI: 0 CCS [ 58.184953] sd 6:0:0:0: [sdb] Attached SCSI removable disk [ 58.185039] sd 6:0:0:0: Attached scsi generic sg2 type 0 [ 58.624330] ACPI Exception (exoparg2-0442): AE_AML_PACKAGE_LIMIT, Index (0FFFFFFFB) is beyond end of object [20070126] [ 58.624378] ACPI Error (psparse-0537): Method parse/execution failed [\_PR_.CPU1._PSS] (Node f7c9d1e0), AE_AML_PACKAGE_LIMIT [ 58.624492] ACPI Exception (processor_perflib-0234): AE_AML_PACKAGE_LIMIT, Evaluating _PSS [20070126] [ 58.624967] ACPI Exception (exoparg2-0442): AE_AML_PACKAGE_LIMIT, Index (0FFFFFFFB) is beyond end of object [20070126] [ 58.625011] ACPI Error (psparse-0537): Method parse/execution failed [\_PR_.CPU2._PSS] (Node f7c9d3d8), AE_AML_PACKAGE_LIMIT [ 58.625126] ACPI Exception (processor_perflib-0234): AE_AML_PACKAGE_LIMIT, Evaluating _PSS [20070126] [ 59.909191] apm: BIOS not found. [ 60.215494] ppdev: user-space parallel port driver [ 60.415567] audit(1249244338.153:2): type=1503 operation="inode_permission" requested_mask="a::" denied_mask="a::" name="/dev/tty" pid=5111 profile="/usr/sbin/cupsd" namespace="default" [ 62.237394] Bluetooth: Core ver 2.11 [ 62.237568] NET: Registered protocol family 31 [ 62.237573] Bluetooth: HCI device and connection manager initialized [ 62.237581] Bluetooth: HCI socket layer initialized [ 62.307408] Bluetooth: L2CAP ver 2.9 [ 62.307417] Bluetooth: L2CAP socket layer initialized [ 62.438572] Bluetooth: RFCOMM socket layer initialized [ 62.438609] Bluetooth: RFCOMM TTY layer initialized [ 62.438614] Bluetooth: RFCOMM ver 1.8 [ 64.336466] NET: Registered protocol family 10 [ 64.337008] lo: Disabled Privacy Extensions [ 64.337909] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 65.019532] ACPI: PCI Interrupt 0000:01:05.0[A] -> GSI 17 (level, low) -> IRQ 18 [ 66.807017] [fglrx] GART Table is not in FRAME_BUFFER range [ 66.807040] [fglrx] Reserve Block - 0 offset = 0X0 length = 0X40000 [ 66.807049] [fglrx] Reserve Block - 1 offset = 0X7ff5000 length = 0Xb000 [ 66.991252] [fglrx] interrupt source 10000000 successfully enabled [ 66.991267] [fglrx] enable ID = 0x00000004 [ 66.991285] [fglrx] Receive enable interrupt message with irqEnableMask: 10000000 [ 74.419270] eth1: no IPv6 routers present [ 75.977483] hda-intel: Invalid position buffer, using LPIB read method instead. [ 122.301110] CPU0 attaching NULL sched-domain. [ 122.301125] CPU1 attaching NULL sched-domain. [ 122.316623] CPU0 attaching sched-domain: [ 122.316634] domain 0: span 03 [ 122.316638] groups: 01 02 [ 122.316648] domain 1: span 03 [ 122.316654] groups: 03 [ 122.316662] CPU1 attaching sched-domain: [ 122.316669] domain 0: span 03 [ 122.316675] groups: 02 01 [ 122.316684] domain 1: span 03 [ 122.316690] groups: 03 [ 128.669624] NET: Registered protocol family 17 [ 135.966498] ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready [ 146.021666] eth1: no IPv6 routers present [ 3902.560372] CPU0 attaching NULL sched-domain. [ 3902.560386] CPU1 attaching NULL sched-domain. [ 3902.582164] CPU0 attaching sched-domain: [ 3902.582177] domain 0: span 03 [ 3902.582182] groups: 01 02 [ 3902.582191] CPU1 attaching sched-domain: [ 3902.582195] domain 0: span 03 [ 3902.582199] groups: 02 01 I havn't internet in this time and I have ather problems , I am sorry thanks -- bcm4311 wifi network connections (kernel >2.6.24-22) https://bugs.launchpad.net/bugs/304806 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
