Same here:

[ 3816.796073] usb 2-2: new high speed USB device using ehci_hcd and address 3
[ 3816.930057] usb 2-2: configuration #1 chosen from 1 choice
[ 3817.014332] Initializing USB Mass Storage driver...
[ 3817.014731] scsi5 : SCSI emulation for USB Mass Storage devices
[ 3817.015089] usb-storage: device found at 3
[ 3817.015095] usbcore: registered new interface driver usb-storage
[ 3817.015102] usb-storage: waiting for device to settle before scanning
[ 3817.015463] USB Mass Storage support registered.
[ 3822.013559] usb-storage: device scan complete
[ 3822.014123] scsi 5:0:0:0: Direct-Access     SAMSUNG  HM251JJ               
PQ: 0 ANSI: 2 CCS
[ 3822.020553] sd 5:0:0:0: [sdb] 488397168 512-byte logical blocks: (250 GB/232 
GiB)
[ 3822.021775] sd 5:0:0:0: [sdb] Write Protect is off
[ 3822.021779] sd 5:0:0:0: [sdb] Mode Sense: 34 00 00 00
[ 3822.021782] sd 5:0:0:0: [sdb] Assuming drive cache: write through
[ 3822.022274] sd 5:0:0:0: Attached scsi generic sg2 type 0
[ 3822.024113] sd 5:0:0:0: [sdb] Assuming drive cache: write through
[ 3822.024121]  sdb: sdb1
[ 3822.117050] sd 5:0:0:0: [sdb] Assuming drive cache: write through
[ 3822.117062] sd 5:0:0:0: [sdb] Attached SCSI disk
[ 3822.488104] usb 2-2: reset high speed USB device using ehci_hcd and address 3
[ 3822.612203] usb 2-2: device descriptor read/64, error -71
[ 3822.844080] usb 2-2: device descriptor read/64, error -71
[ 3823.060104] usb 2-2: reset high speed USB device using ehci_hcd and address 3
[ 3823.180105] usb 2-2: device descriptor read/64, error -71
[ 3823.408090] usb 2-2: device descriptor read/64, error -71
[ 3823.624467] usb 2-2: reset high speed USB device using ehci_hcd and address 3
[ 3824.040041] usb 2-2: device not accepting address 3, error -71
[ 3824.152160] usb 2-2: reset high speed USB device using ehci_hcd and address 3
[ 3824.568167] usb 2-2: device not accepting address 3, error -71
[ 3824.568738] usb 2-2: USB disconnect, address 3
[ 3824.684102] usb 2-2: new high speed USB device using ehci_hcd and address 4
[ 3824.808084] usb 2-2: device descriptor read/64, error -71
[ 3825.036092] usb 2-2: device descriptor read/64, error -71
[ 3825.252058] usb 2-2: new high speed USB device using ehci_hcd and address 5
[ 3825.376081] usb 2-2: device descriptor read/64, error -71
[ 3825.605997] usb 2-2: device descriptor read/64, error -71
[ 3825.824118] usb 2-2: new high speed USB device using ehci_hcd and address 6
[ 3826.240023] usb 2-2: device not accepting address 6, error -71
[ 3826.352056] usb 2-2: new high speed USB device using ehci_hcd and address 7
[ 3826.764091] usb 2-2: device not accepting address 7, error -71
[ 3826.764135] hub 2-0:1.0: unable to enumerate USB device on port 2
[ 3827.036080] usb 5-2: new full speed USB device using uhci_hcd and address 2
[ 3827.156168] usb 5-2: device descriptor read/64, error -71
[ 3827.380086] usb 5-2: device descriptor read/64, error -71
[ 3827.596177] usb 5-2: new full speed USB device using uhci_hcd and address 3
[ 3827.716082] usb 5-2: device descriptor read/64, error -71
[ 3827.940106] usb 5-2: device descriptor read/64, error -71
[ 3828.156099] usb 5-2: new full speed USB device using uhci_hcd and address 4
[ 3828.572048] usb 5-2: device not accepting address 4, error -71
[ 3828.684114] usb 5-2: new full speed USB device using uhci_hcd and address 5
[ 3829.100078] usb 5-2: device not accepting address 5, error -71
[ 3829.100118] hub 5-0:1.0: unable to enumerate USB device on port 2

/etc/lsb-release
DISTRIB_ID=Ubuntu
DISTRIB_RELEASE=9.10
DISTRIB_CODENAME=karmic
DISTRIB_DESCRIPTION="Ubuntu karmic (development branch)"

uname -a
Linux ulrb-linux 2.6.31-6-generic #25-Ubuntu SMP Fri Aug 14 16:28:28 UTC 2009 
x86_64 GNU/Linux

-- 
USB-Hard-Disc doesn't work in 9.10
https://bugs.launchpad.net/bugs/413921
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.

-- 
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs

Reply via email to