Hi all, Two weeks ago, I spoke to Belkin support, and today they send me an e-mail with a link to download a new firmware for the router. This afternoon I've installed the new firmware and..., surprise, the ping answer was inmediatly!!!!, but the speed was the same 60Mb/s just 20inch from the router.
Now I'm about 10m from the router and the speed is reduced until 36Mb/s. It's possible to increase the connection speed? jo...@jordi-ubuntu:~$ ping 192.168.2.1 PING 192.168.2.1 (192.168.2.1) 56(84) bytes of data. 64 bytes from 192.168.2.1: icmp_seq=1 ttl=64 time=7.91 ms 64 bytes from 192.168.2.1: icmp_seq=2 ttl=64 time=4.97 ms 64 bytes from 192.168.2.1: icmp_seq=3 ttl=64 time=11.5 ms 64 bytes from 192.168.2.1: icmp_seq=4 ttl=64 time=11.9 ms 64 bytes from 192.168.2.1: icmp_seq=5 ttl=64 time=2.37 ms 64 bytes from 192.168.2.1: icmp_seq=6 ttl=64 time=8.36 ms 64 bytes from 192.168.2.1: icmp_seq=7 ttl=64 time=38.6 ms ^C --- 192.168.2.1 ping statistics --- 7 packets transmitted, 7 received, 0% packet loss, time 6008ms rtt min/avg/max/mdev = 2.379/12.249/38.632/11.218 ms jo...@jordi-ubuntu:~$ iwconfig wlan0 wlan0 IEEE 802.11abgn ESSID:"Jordi_Belkin_N1" Mode:Managed Frequency:2.462 GHz Access Point: 00:1CF:C6:1C:F8 Bit Rate=36 Mb/s Tx-Power=15 dBm Retry min limit:7 RTS thrff Fragment thr=2352 B Power Managementff Link Quality=56/70 Signal level=-54 dBm Noise level=-81 dBm Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0 Tx excessive retries:0 Invalid misc:0 Missed beacon:0 Thank you very much -- Problems with Intel Wireless WiFi Link 5100 agn, with wifi "n" connection https://bugs.launchpad.net/bugs/437953 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs