Second test with the patch. $ uname -a Linux cyril-laptop 2.6.31-13-generic #44lp446146apw1 SMP Mon Oct 12 09:13:02 UTC 2009 x86_64 GNU/Linux
Still does not work :-( Kernel logs below. The device is recognize as USB mass storage first but then disappear. network-manager recognizes the modem during a few seconds but disappear again. [ 209.730068] usb 5-2: new full speed USB device using uhci_hcd and address 2 [ 209.893536] usb 5-2: configuration #1 chosen from 1 choice [ 210.095042] Initializing USB Mass Storage driver... [ 210.096516] scsi5 : SCSI emulation for USB Mass Storage devices [ 210.096646] usbcore: registered new interface driver usb-storage [ 210.096650] usb-storage: device found at 2 [ 210.096652] usb-storage: waiting for device to settle before scanning [ 210.096655] USB Mass Storage support registered. [ 210.470108] usb 5-2: USB disconnect, address 2 [ 210.750702] usb 5-2: new full speed USB device using uhci_hcd and address 3 [ 210.914533] usb 5-2: configuration #1 chosen from 1 choice [ 210.927444] scsi8 : SCSI emulation for USB Mass Storage devices [ 210.928538] usb-storage: device found at 3 [ 210.928540] usb-storage: waiting for device to settle before scanning [ 210.980952] usbcore: registered new interface driver usbserial [ 210.980964] USB Serial support registered for generic [ 210.981018] usbcore: registered new interface driver usbserial_generic [ 210.981019] usbserial: USB Serial Driver core [ 211.028778] USB Serial support registered for GSM modem (1-port) [ 211.028829] option 5-2:1.0: GSM modem (1-port) converter detected [ 211.028914] usb 5-2: GSM modem (1-port) converter now attached to ttyUSB0 [ 211.028929] option 5-2:1.1: GSM modem (1-port) converter detected [ 211.028971] usb 5-2: GSM modem (1-port) converter now attached to ttyUSB1 [ 211.028986] usbcore: registered new interface driver option [ 211.028988] option: v0.7.2:USB Driver for GSM modems [ 215.921573] usb-storage: device scan complete [ 215.924501] scsi 8:0:0:0: CD-ROM HUAWEI Mass Storage 2.31 PQ: 0 ANSI: 2 [ 215.946494] sr1: scsi-1 drive [ 215.946607] sr 8:0:0:0: Attached scsi CD-ROM sr1 [ 215.946670] sr 8:0:0:0: Attached scsi generic sg2 type 5 [ 228.378573] sr1: CDROM (ioctl) error, command: Get configuration 46 00 00 00 00 00 00 00 20 00 [ 228.378583] sr: Sense Key : No Sense [current] [ 228.378587] sr: Add. Sense: No additional sense information [ 228.580566] sr1: CDROM (ioctl) error, command: Get configuration 46 00 00 00 00 00 00 00 20 00 [ 228.580576] sr: Sense Key : No Sense [current] [ 228.580580] sr: Add. Sense: No additional sense information [ 228.647531] option: option_instat_callback: error -108 [ 228.647660] option1 ttyUSB0: GSM modem (1-port) converter now disconnected from ttyUSB0 [ 228.647679] option 5-2:1.0: device disconnected [ 228.647739] option1 ttyUSB1: GSM modem (1-port) converter now disconnected from ttyUSB1 [ 228.647754] option 5-2:1.1: device disconnected [ 228.762551] usb 5-2: reset full speed USB device using uhci_hcd and address 3 [ 228.923753] option 5-2:1.1: GSM modem (1-port) converter detected [ 228.923840] usb 5-2: GSM modem (1-port) converter now attached to ttyUSB0 [ 228.924468] option 5-2:1.0: GSM modem (1-port) converter detected [ 228.924522] usb 5-2: GSM modem (1-port) converter now attached to ttyUSB1 [ 239.051606] option: option_instat_callback: error -108 [ 243.936279] option1 ttyUSB1: GSM modem (1-port) converter now disconnected from ttyUSB1 [ 243.936298] option 5-2:1.0: device disconnected [ 243.936353] option1 ttyUSB0: GSM modem (1-port) converter now disconnected from ttyUSB0 [ 243.936373] option 5-2:1.1: device disconnected [ 244.050053] usb 5-2: reset full speed USB device using uhci_hcd and address 3 [ 244.180064] usb 5-2: device descriptor read/64, error -71 [ 244.420062] usb 5-2: device descriptor read/64, error -71 [ 244.652563] usb 5-2: reset full speed USB device using uhci_hcd and address 3 [ 244.780066] usb 5-2: device descriptor read/64, error -71 [ 245.020876] usb 5-2: device descriptor read/64, error -71 [ 245.260070] usb 5-2: reset full speed USB device using uhci_hcd and address 3 [ 245.680062] usb 5-2: device not accepting address 3, error -71 [ 245.802579] usb 5-2: reset full speed USB device using uhci_hcd and address 3 [ 246.220061] usb 5-2: device not accepting address 3, error -71 [ 246.220128] usb 5-2: USB disconnect, address 3 [ 246.350075] usb 5-2: new full speed USB device using uhci_hcd and address 4 [ 246.480057] usb 5-2: device descriptor read/64, error -71 [ 246.720089] usb 5-2: device descriptor read/64, error -71 [ 246.950083] usb 5-2: new full speed USB device using uhci_hcd and address 5 [ 247.082560] usb 5-2: device descriptor read/64, error -71 [ 247.320087] usb 5-2: device descriptor read/64, error -71 [ 247.551119] usb 5-2: new full speed USB device using uhci_hcd and address 6 [ 247.970062] usb 5-2: device not accepting address 6, error -71 [ 248.100040] usb 5-2: new full speed USB device using uhci_hcd and address 7 [ 248.520532] usb 5-2: device not accepting address 7, error -71 [ 248.520552] hub 5-0:1.0: unable to enumerate USB device on port 2 -- Oops randomly with Huawei E220 3G dongle (regression) https://bugs.launchpad.net/bugs/430011 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
