Public bug reported: Binary package hint: bluez-utils
Mouse is deteteced with the following steps: Press reset on Mouse. Then issue "sudo hidd --search". After reboot the kde bluetooth applet seems to detect the mouse but is unable to connect. Also "sudo hidd --search" fails. Again a reset on mouse followed by "sudo hidd --search" makes the mouse work again. Attached the output of hcidump in this situation: HCI sniffer - Bluetooth packet analyzer ver 1.33 device: hci0 snap_len: 1028 filter: 0xffffffff > HCI Event: Connect Request (0x04) plen 10 < HCI Command: Accept Connection Request (0x01|0x0009) plen 7 > HCI Event: Command Status (0x0f) plen 4 > HCI Event: Connect Complete (0x03) plen 11 < HCI Command: Read Remote Supported Features (0x01|0x001b) plen 2 > HCI Event: Page Scan Repetition Mode Change (0x20) plen 7 > ACL data: handle 42 flags 0x02 dlen 12 L2CAP(s): Connect req: psm 17 scid 0x004a < ACL data: handle 42 flags 0x02 dlen 16 L2CAP(s): Connect rsp: dcid 0x0000 scid 0x004a result 2 status 0 Connection refused - PSM not supported > HCI Event: Command Status (0x0f) plen 4 > HCI Event: Number of Completed Packets (0x13) plen 5 > HCI Event: Command Status (0x0f) plen 4 < HCI Command: Write Link Policy Settings (0x02|0x000d) plen 4 > HCI Event: Command Complete (0x0e) plen 6 < HCI Command: Change Connection Packet Type (0x01|0x000f) plen 4 > HCI Event: QoS Setup Complete (0x0d) plen 21 > HCI Event: Command Status (0x0f) plen 4 < HCI Command: Remote Name Request (0x01|0x0019) plen 10 > HCI Event: Connection Packet Type Changed (0x1d) plen 5 > HCI Event: Read Remote Supported Features (0x0b) plen 11 > HCI Event: Command Status (0x0f) plen 4 > HCI Event: Remote Name Req Complete (0x07) plen 255 > ACL data: handle 42 flags 0x02 dlen 12 L2CAP(s): Connect req: psm 17 scid 0x004b < ACL data: handle 42 flags 0x02 dlen 16 L2CAP(s): Connect rsp: dcid 0x0000 scid 0x004b result 2 status 0 Connection refused - PSM not supported > HCI Event: Number of Completed Packets (0x13) plen 5 > HCI Event: Disconn Complete (0x05) plen 4 > HCI Event: Connect Request (0x04) plen 10 < HCI Command: Accept Connection Request (0x01|0x0009) plen 7 > HCI Event: Command Status (0x0f) plen 4 > HCI Event: Connect Complete (0x03) plen 11 < HCI Command: Read Remote Supported Features (0x01|0x001b) plen 2 > HCI Event: Page Scan Repetition Mode Change (0x20) plen 7 > HCI Event: Command Status (0x0f) plen 4 > ACL data: handle 43 flags 0x02 dlen 12 L2CAP(s): Connect req: psm 17 scid 0x004c < ACL data: handle 43 flags 0x02 dlen 16 L2CAP(s): Connect rsp: dcid 0x0000 scid 0x004c result 2 status 0 Connection refused - PSM not supported > HCI Event: Number of Completed Packets (0x13) plen 5 > HCI Event: Command Status (0x0f) plen 4 < HCI Command: Write Link Policy Settings (0x02|0x000d) plen 4 > HCI Event: Command Complete (0x0e) plen 6 < HCI Command: Change Connection Packet Type (0x01|0x000f) plen 4 > HCI Event: QoS Setup Complete (0x0d) plen 21 > HCI Event: Command Status (0x0f) plen 4 < HCI Command: Remote Name Request (0x01|0x0019) plen 10 > HCI Event: Connection Packet Type Changed (0x1d) plen 5 > HCI Event: Read Remote Supported Features (0x0b) plen 11 > HCI Event: Command Status (0x0f) plen 4 > HCI Event: Remote Name Req Complete (0x07) plen 255 > ACL data: handle 43 flags 0x02 dlen 12 L2CAP(s): Connect req: psm 17 scid 0x004d < ACL data: handle 43 flags 0x02 dlen 16 L2CAP(s): Connect rsp: dcid 0x0000 scid 0x004d result 2 status 0 Connection refused - PSM not supported > HCI Event: Number of Completed Packets (0x13) plen 5 > HCI Event: Disconn Complete (0x05) plen 4 > HCI Event: Connect Request (0x04) plen 10 < HCI Command: Accept Connection Request (0x01|0x0009) plen 7 > HCI Event: Command Status (0x0f) plen 4 > HCI Event: Connect Complete (0x03) plen 11 < HCI Command: Read Remote Supported Features (0x01|0x001b) plen 2 > HCI Event: Page Scan Repetition Mode Change (0x20) plen 7 > HCI Event: Command Status (0x0f) plen 4 > ACL data: handle 44 flags 0x02 dlen 12 L2CAP(s): Connect req: psm 17 scid 0x004e < ACL data: handle 44 flags 0x02 dlen 16 L2CAP(s): Connect rsp: dcid 0x0000 scid 0x004e result 2 status 0 Connection refused - PSM not supported > HCI Event: Number of Completed Packets (0x13) plen 5 > HCI Event: Command Status (0x0f) plen 4 < HCI Command: Write Link Policy Settings (0x02|0x000d) plen 4 > HCI Event: Command Complete (0x0e) plen 6 < HCI Command: Change Connection Packet Type (0x01|0x000f) plen 4 > HCI Event: QoS Setup Complete (0x0d) plen 21 > HCI Event: Command Status (0x0f) plen 4 < HCI Command: Remote Name Request (0x01|0x0019) plen 10 > HCI Event: Connection Packet Type Changed (0x1d) plen 5 > HCI Event: Read Remote Supported Features (0x0b) plen 11 > HCI Event: Command Status (0x0f) plen 4 > HCI Event: Remote Name Req Complete (0x07) plen 255 > HCI Event: Disconn Complete (0x05) plen 4 > HCI Event: Connect Request (0x04) plen 10 < HCI Command: Accept Connection Request (0x01|0x0009) plen 7 > HCI Event: Command Status (0x0f) plen 4 > HCI Event: Connect Complete (0x03) plen 11 < HCI Command: Read Remote Supported Features (0x01|0x001b) plen 2 > HCI Event: Page Scan Repetition Mode Change (0x20) plen 7 > HCI Event: Command Status (0x0f) plen 4 > ACL data: handle 45 flags 0x02 dlen 12 L2CAP(s): Connect req: psm 17 scid 0x004f < ACL data: handle 45 flags 0x02 dlen 16 L2CAP(s): Connect rsp: dcid 0x0000 scid 0x004f result 2 status 0 Connection refused - PSM not supported > HCI Event: Number of Completed Packets (0x13) plen 5 > HCI Event: Command Status (0x0f) plen 4 < HCI Command: Write Link Policy Settings (0x02|0x000d) plen 4 > HCI Event: Command Complete (0x0e) plen 6 < HCI Command: Change Connection Packet Type (0x01|0x000f) plen 4 > HCI Event: QoS Setup Complete (0x0d) plen 21 > HCI Event: Command Status (0x0f) plen 4 < HCI Command: Remote Name Request (0x01|0x0019) plen 10 > HCI Event: Connection Packet Type Changed (0x1d) plen 5 > HCI Event: Read Remote Supported Features (0x0b) plen 11 > HCI Event: Command Status (0x0f) plen 4 > HCI Event: Remote Name Req Complete (0x07) plen 255 > HCI Event: Disconn Complete (0x05) plen 4 < HCI Command: Inquiry (0x01|0x0001) plen 5 > HCI Event: Command Status (0x0f) plen 4 > HCI Event: Inquiry Result with RSSI (0x22) plen 15 > HCI Event: Inquiry Result with RSSI (0x22) plen 15 > HCI Event: Inquiry Result with RSSI (0x22) plen 15 > HCI Event: Inquiry Result with RSSI (0x22) plen 15 > HCI Event: Inquiry Result with RSSI (0x22) plen 15 > HCI Event: Inquiry Result with RSSI (0x22) plen 15 > HCI Event: Inquiry Result with RSSI (0x22) plen 15 > HCI Event: Inquiry Result with RSSI (0x22) plen 15 > HCI Event: Inquiry Result with RSSI (0x22) plen 15 > HCI Event: Inquiry Result with RSSI (0x22) plen 15 > HCI Event: Inquiry Result with RSSI (0x22) plen 15 > HCI Event: Inquiry Result with RSSI (0x22) plen 15 > HCI Event: Inquiry Result with RSSI (0x22) plen 15 > HCI Event: Inquiry Result with RSSI (0x22) plen 15 > HCI Event: Inquiry Result with RSSI (0x22) plen 15 > HCI Event: Inquiry Result with RSSI (0x22) plen 15 > HCI Event: Inquiry Result with RSSI (0x22) plen 15 > HCI Event: Inquiry Result with RSSI (0x22) plen 15 > HCI Event: Inquiry Result with RSSI (0x22) plen 15 > HCI Event: Inquiry Result with RSSI (0x22) plen 15 > HCI Event: Inquiry Result with RSSI (0x22) plen 15 > HCI Event: Inquiry Result with RSSI (0x22) plen 15 > HCI Event: Inquiry Complete (0x01) plen 1 < HCI Command: Create Connection (0x01|0x0005) plen 13 > HCI Event: Command Status (0x0f) plen 4 > HCI Event: Connect Complete (0x03) plen 11 < ACL data: handle 42 flags 0x02 dlen 12 L2CAP(s): Connect req: psm 1 scid 0x0040 < HCI Command: Read Remote Supported Features (0x01|0x001b) plen 2 > HCI Event: Number of Completed Packets (0x13) plen 5 > ACL data: handle 42 flags 0x02 dlen 16 L2CAP(s): Connect rsp: dcid 0x0050 scid 0x0040 result 1 status 2 Connection pending - Authorization pending > HCI Event: Command Status (0x0f) plen 4 < HCI Command: Write Link Policy Settings (0x02|0x000d) plen 4 > HCI Event: Command Complete (0x0e) plen 6 < HCI Command: Remote Name Request (0x01|0x0019) plen 10 > ACL data: handle 42 flags 0x02 dlen 16 L2CAP(s): Connect rsp: dcid 0x0050 scid 0x0040 result 0 status 0 Connection successful < ACL data: handle 42 flags 0x02 dlen 12 L2CAP(s): Config req: dcid 0x0050 flags 0x00 clen 0 > HCI Event: Command Status (0x0f) plen 4 > HCI Event: Number of Completed Packets (0x13) plen 5 > HCI Event: Read Remote Supported Features (0x0b) plen 11 > ACL data: handle 42 flags 0x02 dlen 14 L2CAP(s): Config rsp: scid 0x0040 flags 0x00 result 0 clen 0 Success > ACL data: handle 42 flags 0x02 dlen 16 L2CAP(s): Config req: dcid 0x0040 flags 0x00 clen 4 MTU 48 < ACL data: handle 42 flags 0x02 dlen 18 L2CAP(s): Config rsp: scid 0x0050 flags 0x00 result 0 clen 4 Success MTU 48 < ACL data: handle 42 flags 0x02 dlen 24 L2CAP(d): cid 0x0050 len 20 [psm 1] SDP SSA Req: tid 0x0 len 0xf pat uuid-16 0x1200 (PNPInfo) max 65535 aid(s) 0x0000 - 0xffff ... ProblemType: Bug Date: Fri Feb 23 08:44:47 2007 DistroRelease: Ubuntu 7.04 Uname: Linux johannes-laptop 2.6.20-rc6-ubuntu1 #1 Sun Feb 11 15:39:29 CET 2007 i686 GNU/Linux ** Affects: bluez-utils (Ubuntu) Importance: Undecided Status: Unconfirmed -- Logitech Bluetooth V270 Mouse not detected after reboot on feisty https://launchpad.net/bugs/87265 -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs