Hello Brian! Here are the results of your request (see attachment).
I hope you can solve the problem because it seems to depend on different types of usb-hubs... (I use a noname-hub, no problems under ubuntu 6-10 and windows xp) Remark: I also get an error message during boot process: udevd-event: udev_db_add_device: unable to create db file '/dev/.udev/db/[EMAIL PROTECTED]@mice': no such file or directory and udevd-event: udev_db_add_device: unable to create db file '/dev/.udev/db/[EMAIL PROTECTED]@mouse0': no such file or directory Perhaps there is a relationship between? Best regards, Al Buntu Brian Murray schrieb: > Thanks for your bug report. Could you please add the output of 'lsusb' > when the mouse is connected to the USB hub? Also if you could add the > output of 'dmesg' when the mouse is behaving badly that would be great. > Thanks in advance. > > ** Changed in: Ubuntu > Assignee: (unassigned) => Brian Murray > Status: Unconfirmed => Needs Info > > [ 0.000000] Linux version 2.6.20-8-generic ([EMAIL PROTECTED]) (gcc version 4.1.2 20070129 (prerelease) (Ubuntu 4.1.1-31ubuntu2)) #2 SMP Tue Feb 13 05:18:42 UTC 2007 (Ubuntu 2.6.20-8.14-generic) [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] sanitize start [ 0.000000] sanitize end [ 0.000000] copy_e820_map() start: 0000000000000000 size: 00000000000a0000 end: 00000000000a0000 type: 1 [ 0.000000] copy_e820_map() type is E820_RAM [ 0.000000] copy_e820_map() start: 00000000000f0000 size: 0000000000010000 end: 0000000000100000 type: 2 [ 0.000000] copy_e820_map() start: 0000000000100000 size: 000000005fef0000 end: 000000005fff0000 type: 1 [ 0.000000] copy_e820_map() type is E820_RAM [ 0.000000] copy_e820_map() start: 000000005fff0000 size: 0000000000003000 end: 000000005fff3000 type: 4 [ 0.000000] copy_e820_map() start: 000000005fff3000 size: 000000000000d000 end: 0000000060000000 type: 3 [ 0.000000] copy_e820_map() start: 00000000fec00000 size: 0000000000001000 end: 00000000fec01000 type: 2 [ 0.000000] copy_e820_map() start: 00000000fee00000 size: 0000000000001000 end: 00000000fee01000 type: 2 [ 0.000000] copy_e820_map() start: 00000000ffff0000 size: 0000000000010000 end: 0000000100000000 type: 2 [ 0.000000] BIOS-e820: 0000000000000000 - 00000000000a0000 (usable) [ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 000000005fff0000 (usable) [ 0.000000] BIOS-e820: 000000005fff0000 - 000000005fff3000 (ACPI NVS) [ 0.000000] BIOS-e820: 000000005fff3000 - 0000000060000000 (ACPI data) [ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved) [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) [ 0.000000] BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved) [ 0.000000] 639MB HIGHMEM available. [ 0.000000] 896MB LOWMEM available. [ 0.000000] Entering add_active_range(0, 0, 393200) 0 entries of 256 used [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0 -> 4096 [ 0.000000] Normal 4096 -> 229376 [ 0.000000] HighMem 229376 -> 393200 [ 0.000000] early_node_map[1] active PFN ranges [ 0.000000] 0: 0 -> 393200 [ 0.000000] On node 0 totalpages: 393200 [ 0.000000] DMA zone: 32 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 4064 pages, LIFO batch:0 [ 0.000000] Normal zone: 1760 pages used for memmap [ 0.000000] Normal zone: 223520 pages, LIFO batch:31 [ 0.000000] HighMem zone: 1279 pages used for memmap [ 0.000000] HighMem zone: 162545 pages, LIFO batch:31 [ 0.000000] DMI 2.2 present. [ 0.000000] ACPI: RSDP (v000 Nvidia ) @ 0x000f68e0 [ 0.000000] ACPI: RSDT (v001 Nvidia AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x5fff3000 [ 0.000000] ACPI: FADT (v001 Nvidia AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x5fff3040 [ 0.000000] ACPI: MADT (v001 Nvidia AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x5fff7340 [ 0.000000] ACPI: DSDT (v001 NVIDIA AWRDACPI 0x00001000 MSFT 0x0100000e) @ 0x00000000 [ 0.000000] Nvidia board detected. Ignoring ACPI timer override. [ 0.000000] If you got timer trouble try acpi_use_timer_override [ 0.000000] Nvidia board detected. Ignoring ACPI timer override. [ 0.000000] If you got timer trouble try acpi_use_timer_override [ 0.000000] ACPI: PM-Timer IO Port: 0x4008 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) [ 0.000000] Processor #0 6:10 APIC version 16 [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: BIOS IRQ0 pin2 override ignored. [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge) [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] ACPI: IRQ14 used by override. [ 0.000000] ACPI: IRQ15 used by override. [ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] Allocating PCI resources starting at 70000000 (gap: 60000000:9ec00000) [ 0.000000] Detected 2191.251 MHz processor. [ 18.843637] Built 1 zonelists. Total pages: 390129 [ 18.843641] Kernel command line: root=UUID=5f29d884-300a-4798-b5ef-b9ab5d2f0e21 ro quiet splash locale=de_DE [ 18.843790] mapped APIC to ffffd000 (fee00000) [ 18.843793] mapped IOAPIC to ffffc000 (fec00000) [ 18.843796] Enabling fast FPU save and restore... done. [ 18.843798] Enabling unmasked SIMD FPU exception support... done. [ 18.843807] Initializing CPU#0 [ 18.843860] PID hash table entries: 4096 (order: 12, 16384 bytes) [ 18.845580] Console: colour VGA+ 80x25 [ 18.846074] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 18.846499] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 18.894224] Memory: 1548384k/1572800k available (1979k kernel code, 23188k reserved, 882k data, 324k init, 655296k highmem) [ 18.894233] virtual kernel memory layout: [ 18.894234] fixmap : 0xfff4e000 - 0xfffff000 ( 708 kB) [ 18.894236] pkmap : 0xff800000 - 0xffc00000 (4096 kB) [ 18.894237] vmalloc : 0xf8800000 - 0xff7fe000 ( 111 MB) [ 18.894238] lowmem : 0xc0000000 - 0xf8000000 ( 896 MB) [ 18.894239] .init : 0xc03d1000 - 0xc0422000 ( 324 kB) [ 18.894240] .data : 0xc02eecb4 - 0xc03cb6d4 ( 882 kB) [ 18.894241] .text : 0xc0100000 - 0xc02eecb4 (1979 kB) [ 18.894244] Checking if this processor honours the WP bit even in supervisor mode... Ok. [ 18.971785] Calibrating delay using timer specific routine.. 4385.94 BogoMIPS (lpj=8771896) [ 18.971828] Security Framework v1.0.0 initialized [ 18.971834] SELinux: Disabled at boot. [ 18.971851] Mount-cache hash table entries: 512 [ 18.971998] CPU: After generic identify, caps: 0383fbff c1c3fbff 00000000 00000000 00000000 00000000 00000000 [ 18.972007] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) [ 18.972010] CPU: L2 Cache: 512K (64 bytes/line) [ 18.972012] CPU: After all inits, caps: 0383fbff c1c3fbff 00000000 00000420 00000000 00000000 00000000 [ 18.972032] Checking 'hlt' instruction... OK. [ 18.987895] SMP alternatives: switching to UP code [ 18.988145] Freeing SMP alternatives: 11k freed [ 18.988253] ACPI: Core revision 20060707 [ 18.997605] CPU0: AMD Athlon(tm) XP 3200+ stepping 00 [ 18.997624] Total of 1 processors activated (4385.94 BogoMIPS). [ 18.997817] ENABLING IO-APIC IRQs [ 18.998005] ..TIMER: vector=0x31 apic1=0 pin1=0 apic2=-1 pin2=-1 [ 19.143721] Brought up 1 CPUs [ 19.143951] Booting paravirtualized kernel on bare hardware [ 19.144015] Time: 10:29:30 Date: 01/24/107 [ 19.144048] NET: Registered protocol family 16 [ 19.144147] EISA bus registered [ 19.144150] ACPI: bus type pci registered [ 19.175934] PCI: PCI BIOS revision 2.10 entry at 0xfb540, last bus=2 [ 19.175937] PCI: Using configuration type 1 [ 19.175938] Setting up standard PCI resources [ 19.189588] ACPI: Interpreter enabled [ 19.189591] ACPI: Using IOAPIC for interrupt routing [ 19.190097] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 19.190102] PCI: Probing PCI hardware (bus 00) [ 19.190313] PCI: nForce2 C1 Halt Disconnect fixup [ 19.191040] Boot video device is 0000:02:00.0 [ 19.191084] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 19.233229] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT] [ 19.233672] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGPB._PRT] [ 19.234528] ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 6 7 *10 11 12 14 15) [ 19.234779] ACPI: PCI Interrupt Link [LNK2] (IRQs 3 4 *5 6 7 10 11 12 14 15) [ 19.235031] ACPI: PCI Interrupt Link [LNK3] (IRQs 3 4 5 6 *7 10 11 12 14 15) [ 19.235284] ACPI: PCI Interrupt Link [LNK4] (IRQs 3 4 5 6 7 10 11 *12 14 15) [ 19.235679] ACPI: PCI Interrupt Link [LNK5] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled. [ 19.235931] ACPI: PCI Interrupt Link [LUBA] (IRQs 3 4 5 6 7 10 *11 12 14 15) [ 19.236181] ACPI: PCI Interrupt Link [LUBB] (IRQs 3 *4 5 6 7 10 11 12 14 15) [ 19.236434] ACPI: PCI Interrupt Link [LMAC] (IRQs 3 4 5 6 7 10 *11 12 14 15) [ 19.236687] ACPI: PCI Interrupt Link [LAPU] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled. [ 19.236938] ACPI: PCI Interrupt Link [LACI] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled. [ 19.237188] ACPI: PCI Interrupt Link [LMCI] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled. [ 19.237445] ACPI: PCI Interrupt Link [LSMB] (IRQs 3 4 5 6 7 *10 11 12 14 15) [ 19.237699] ACPI: PCI Interrupt Link [LUB2] (IRQs *3 4 5 6 7 10 11 12 14 15) [ 19.237951] ACPI: PCI Interrupt Link [LFIR] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled. [ 19.238201] ACPI: PCI Interrupt Link [L3CM] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled. [ 19.238452] ACPI: PCI Interrupt Link [LIDE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled. [ 19.238683] ACPI: PCI Interrupt Link [APC1] (IRQs *16), disabled. [ 19.238903] ACPI: PCI Interrupt Link [APC2] (IRQs *17), disabled. [ 19.239122] ACPI: PCI Interrupt Link [APC3] (IRQs *18), disabled. [ 19.239342] ACPI: PCI Interrupt Link [APC4] (IRQs *19), disabled. [ 19.239560] ACPI: PCI Interrupt Link [APC5] (IRQs *16), disabled. [ 19.239848] ACPI: PCI Interrupt Link [APCF] (IRQs 20 21 22) *0, disabled. [ 19.240129] ACPI: PCI Interrupt Link [APCG] (IRQs 20 21 22) *0, disabled. [ 19.240416] ACPI: PCI Interrupt Link [APCH] (IRQs 20 21 22) *0, disabled. [ 19.240700] ACPI: PCI Interrupt Link [APCI] (IRQs 20 21 22) *0, disabled. [ 19.240981] ACPI: PCI Interrupt Link [APCJ] (IRQs 20 21 22) *0, disabled. [ 19.241267] ACPI: PCI Interrupt Link [APCK] (IRQs 20 21 22) *0, disabled. [ 19.241488] ACPI: PCI Interrupt Link [APCS] (IRQs *23), disabled. [ 19.241770] ACPI: PCI Interrupt Link [APCL] (IRQs 20 21 22) *0, disabled. [ 19.242053] ACPI: PCI Interrupt Link [APCM] (IRQs 20 21 22) *0, disabled. [ 19.242332] ACPI: PCI Interrupt Link [AP3C] (IRQs 20 21 22) *0, disabled. [ 19.242616] ACPI: PCI Interrupt Link [APCZ] (IRQs 20 21 22) *0, disabled. [ 19.244327] Linux Plug and Play Support v0.97 (c) Adam Belay [ 19.244336] pnp: PnP ACPI init [ 19.247892] pnp: PnP ACPI: found 10 devices [ 19.247896] PnPBIOS: Disabled by ACPI PNP [ 19.247946] PCI: Using ACPI for IRQ routing [ 19.247950] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report [ 19.286612] pnp: 00:00: ioport range 0x4000-0x407f could not be reserved [ 19.286616] pnp: 00:00: ioport range 0x4080-0x40ff has been reserved [ 19.286618] pnp: 00:00: ioport range 0x4400-0x447f has been reserved [ 19.286621] pnp: 00:00: ioport range 0x4480-0x44ff could not be reserved [ 19.286623] pnp: 00:00: ioport range 0x4200-0x427f has been reserved [ 19.286625] pnp: 00:00: ioport range 0x4280-0x42ff has been reserved [ 19.286630] pnp: 00:01: ioport range 0x5000-0x503f has been reserved [ 19.286632] pnp: 00:01: ioport range 0x5500-0x553f has been reserved [ 19.286844] PCI: Bridge: 0000:00:08.0 [ 19.286847] IO window: d000-dfff [ 19.286851] MEM window: da000000-daffffff [ 19.286855] PREFETCH window: disabled. [ 19.286861] PCI: Bridge: 0000:00:1e.0 [ 19.286862] IO window: disabled. [ 19.286866] MEM window: d8000000-d9ffffff [ 19.286869] PREFETCH window: d0000000-d7ffffff [ 19.286880] PCI: Setting latency timer of device 0000:00:08.0 to 64 [ 19.286910] NET: Registered protocol family 2 [ 19.323651] IP route cache hash table entries: 32768 (order: 5, 131072 bytes) [ 19.323836] TCP established hash table entries: 131072 (order: 8, 1048576 bytes) [ 19.324981] TCP bind hash table entries: 65536 (order: 7, 524288 bytes) [ 19.325589] TCP: Hash tables configured (established 131072 bind 65536) [ 19.325592] TCP reno registered [ 19.335705] checking if image is initramfs... it is [ 19.820480] Freeing initrd memory: 6422k freed [ 19.820903] audit: initializing netlink socket (disabled) [ 19.820916] audit(1172312971.064:1): initialized [ 19.820973] highmem bounce pool size: 64 pages [ 19.821022] VFS: Disk quotas dquot_6.5.1 [ 19.821043] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 19.821087] io scheduler noop registered [ 19.821090] io scheduler anticipatory registered [ 19.821092] io scheduler deadline registered [ 19.821099] io scheduler cfq registered (default) [ 19.875453] isapnp: Scanning for PnP cards... [ 20.229673] isapnp: No Plug & Play device found [ 20.251251] Real Time Clock Driver v1.12ac [ 20.251296] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled [ 20.251792] mice: PS/2 mouse device common for all mice [ 20.252286] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize [ 20.252458] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 [ 20.252462] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx [ 20.252689] PNP: No PS/2 controller found. Probing ports directly. [ 20.503274] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 20.503401] EISA: Probing bus 0 at eisa.0 [ 20.503423] Cannot allocate resource for EISA slot 4 [ 20.503425] Cannot allocate resource for EISA slot 5 [ 20.503440] EISA: Detected 0 cards. [ 20.533504] TCP cubic registered [ 20.533510] NET: Registered protocol family 1 [ 20.533516] NET: Registered protocol family 8 [ 20.533517] NET: Registered protocol family 20 [ 20.533542] Using IPI No-Shortcut mode [ 20.533589] ACPI: (supports S0 S1 S4 S5) [ 20.533632] Magic number: 11:762:477 [ 20.534101] Freeing unused kernel memory: 324k freed [ 20.534815] Time: tsc clocksource has been installed. [ 21.740280] Capability LSM initialized [ 22.209443] usbcore: registered new interface driver usbfs [ 22.209464] usbcore: registered new interface driver hub [ 22.209487] usbcore: registered new device driver usb [ 22.210120] ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver [ 22.210482] ACPI: PCI Interrupt Link [APCF] enabled at IRQ 22 [ 22.210490] ACPI: PCI Interrupt 0000:00:02.0[A] -> Link [APCF] -> GSI 22 (level, high) -> IRQ 16 [ 22.210503] PCI: Setting latency timer of device 0000:00:02.0 to 64 [ 22.210506] ohci_hcd 0000:00:02.0: OHCI Host Controller [ 22.210652] ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 1 [ 22.210669] ohci_hcd 0000:00:02.0: irq 16, io mem 0xdb001000 [ 22.225910] forcedeth.c: Reverse Engineered nForce ethernet driver. Version 0.59. [ 22.289520] ieee1394: Initialized config rom entry `ip1394' [ 22.299953] usb usb1: configuration #1 chosen from 1 choice [ 22.299988] hub 1-0:1.0: USB hub found [ 22.300000] hub 1-0:1.0: 3 ports detected [ 22.402610] ACPI: PCI Interrupt Link [APCG] enabled at IRQ 21 [ 22.402620] ACPI: PCI Interrupt 0000:00:02.1[B] -> Link [APCG] -> GSI 21 (level, high) -> IRQ 17 [ 22.402637] PCI: Setting latency timer of device 0000:00:02.1 to 64 [ 22.402640] ohci_hcd 0000:00:02.1: OHCI Host Controller [ 22.402739] ohci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 2 [ 22.402759] ohci_hcd 0000:00:02.1: irq 17, io mem 0xdb002000 [ 22.459814] usb usb2: configuration #1 chosen from 1 choice [ 22.459838] hub 2-0:1.0: USB hub found [ 22.459848] hub 2-0:1.0: 3 ports detected [ 22.562626] ACPI: PCI Interrupt Link [APCL] enabled at IRQ 20 [ 22.562636] ACPI: PCI Interrupt 0000:00:02.2[C] -> Link [APCL] -> GSI 20 (level, high) -> IRQ 18 [ 22.562648] PCI: Setting latency timer of device 0000:00:02.2 to 64 [ 22.562651] ehci_hcd 0000:00:02.2: EHCI Host Controller [ 22.562679] ehci_hcd 0000:00:02.2: new USB bus registered, assigned bus number 3 [ 22.562714] ehci_hcd 0000:00:02.2: debug port 1 [ 22.562718] PCI: cache line size of 64 is not supported by device 0000:00:02.2 [ 22.562729] ehci_hcd 0000:00:02.2: irq 18, io mem 0xdb003000 [ 22.562737] ehci_hcd 0000:00:02.2: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 [ 22.562804] usb usb3: configuration #1 chosen from 1 choice [ 22.562826] hub 3-0:1.0: USB hub found [ 22.562835] hub 3-0:1.0: 6 ports detected [ 22.666153] ACPI: PCI Interrupt Link [APCH] enabled at IRQ 22 [ 22.666159] ACPI: PCI Interrupt 0000:00:04.0[A] -> Link [APCH] -> GSI 22 (level, high) -> IRQ 16 [ 22.666166] PCI: Setting latency timer of device 0000:00:04.0 to 64 [ 23.181697] eth0: forcedeth.c: subsystem: 01043:80a7 bound to 0000:00:04.0 [ 23.181808] NFORCE2: IDE controller at PCI slot 0000:00:09.0 [ 23.181830] NFORCE2: chipset revision 162 [ 23.181832] NFORCE2: not 100% native mode: will probe irqs later [ 23.181836] NFORCE2: BIOS didn't set cable bits correctly. Enabling workaround. [ 23.181838] NFORCE2: BIOS didn't set cable bits correctly. Enabling workaround. [ 23.181844] NFORCE2: 0000:00:09.0 (rev a2) UDMA133 controller [ 23.181853] ide0: BM-DMA at 0xf000-0xf007, BIOS settings: hda:DMA, hdb:DMA [ 23.181864] ide1: BM-DMA at 0xf008-0xf00f, BIOS settings: hdc:DMA, hdd:DMA [ 23.181872] Probing IDE interface ide0... [ 23.437194] usb 3-2: new high speed USB device using ehci_hcd and address 3 [ 23.469291] hda: Maxtor 6Y160P0, ATA DISK drive [ 23.549128] usb 3-2: device descriptor read/64, error -71 [ 23.765005] usb 3-2: device descriptor read/64, error -71 [ 23.917043] hdb: HL-DT-STDVD-ROM GDR8164B, ATAPI CD/DVD-ROM drive [ 23.974133] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 [ 23.974390] Probing IDE interface ide1... [ 23.983335] usb 3-2: new high speed USB device using ehci_hcd and address 4 [ 24.092818] usb 3-2: device descriptor read/64, error -71 [ 24.260839] hdc: WDC WD1600JB-00EVA0, ATA DISK drive [ 24.308695] usb 3-2: device descriptor read/64, error -71 [ 24.524572] usb 3-2: new high speed USB device using ehci_hcd and address 5 [ 24.708583] hdd: HL-DT-ST DVDRAM GSA-4163B, ATAPI CD/DVD-ROM drive [ 24.767742] ide1 at 0x170-0x177,0x376 on irq 15 [ 24.775081] SCSI subsystem initialized [ 24.779607] libata version 2.00 loaded. [ 24.784256] ACPI: PCI Interrupt Link [APC3] enabled at IRQ 18 [ 24.784266] ACPI: PCI Interrupt 0000:01:09.2[B] -> Link [APC3] -> GSI 18 (level, high) -> IRQ 19 [ 24.835158] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[19] MMIO=[da014000-da0147ff] Max Packet=[2048] IR/IT contexts=[4/8] [ 24.840617] hda: max request size: 512KiB [ 24.854192] hda: 320173056 sectors (163928 MB) w/7936KiB Cache, CHS=19929/255/63, UDMA(133) [ 24.854367] hda: cache flushes supported [ 24.854406] hda: hda1 hda2 hda3 hda4 < hda5 > [ 24.884943] hdc: max request size: 512KiB [ 24.886888] hdb: ATAPI 52X DVD-ROM drive, 256kB Cache, UDMA(33) [ 24.886894] Uniform CD-ROM driver Revision: 3.20 [ 24.901299] hdc: 312581808 sectors (160041 MB) w/8192KiB Cache, CHS=19457/255/63, UDMA(100) [ 24.902930] hdc: cache flushes supported [ 24.902947] hdc: hdc1 < hdc5 hdc6 > [ 24.932338] usb 3-2: device not accepting address 5, error -71 [ 24.952352] hdd: ATAPI 40X DVD-ROM DVD-R-RAM CD-R/RW drive, 2048kB Cache, UDMA(33) [ 25.210210] Attempting manual resume [ 25.210214] swsusp: Resume From Partition 3:3 [ 25.210216] PM: Checking swsusp image. [ 25.210452] PM: Resume from disk failed. [ 25.222987] EXT3-fs: INFO: recovery required on readonly filesystem. [ 25.222991] EXT3-fs: write access will be enabled during recovery. [ 25.228183] usb 3-5: new high speed USB device using ehci_hcd and address 7 [ 25.371030] usb 3-5: configuration #1 chosen from 1 choice [ 25.671914] usb 1-1: new low speed USB device using ohci_hcd and address 3 [ 25.906862] usb 1-1: configuration #1 chosen from 1 choice [ 26.103796] ieee1394: Host added: ID:BUS[0-00:1023] GUID[00023c0151085f89] [ 26.211601] usb 1-2: new full speed USB device using ohci_hcd and address 4 [ 26.395508] usb 1-2: device descriptor read/64, error -62 [ 26.683336] usb 1-2: device descriptor read/64, error -62 [ 26.963176] usb 1-2: new full speed USB device using ohci_hcd and address 5 [ 27.147069] usb 1-2: device descriptor read/64, error -62 [ 27.434909] usb 1-2: device descriptor read/64, error -62 [ 27.710741] usb 1-2: new full speed USB device using ohci_hcd and address 6 [ 28.118504] usb 1-2: device not accepting address 6, error -62 [ 28.294405] usb 1-2: new full speed USB device using ohci_hcd and address 7 [ 28.702171] usb 1-2: device not accepting address 7, error -62 [ 28.750598] usbcore: registered new interface driver libusual [ 28.753953] Initializing USB Mass Storage driver... [ 28.754040] scsi0 : SCSI emulation for USB Mass Storage devices [ 28.754086] usb-storage: device found at 7 [ 28.754088] usb-storage: waiting for device to settle before scanning [ 28.754102] usbcore: registered new interface driver usb-storage [ 28.754105] USB Mass Storage support registered. [ 28.755066] usbcore: registered new interface driver hiddev [ 28.813412] input: KYE Systems Corp. Wireless Keyboard & Mouse as /class/input/input0 [ 28.813426] input: USB HID v1.10 Keyboard [KYE Systems Corp. Wireless Keyboard & Mouse] on usb-0000:00:02.0-1 [ 28.822396] input: KYE Systems Corp. Wireless Keyboard & Mouse as /class/input/input1 [ 28.822418] input: USB HID v1.10 Mouse [KYE Systems Corp. Wireless Keyboard & Mouse] on usb-0000:00:02.0-1 [ 28.822428] usbcore: registered new interface driver usbhid [ 28.822432] drivers/usb/input/hid-core.c: v2.6:USB HID core driver [ 29.235955] kjournald starting. Commit interval 5 seconds [ 29.235972] EXT3-fs: recovery complete. [ 29.245658] EXT3-fs: mounted filesystem with ordered data mode. [ 33.747790] usb-storage: device scan complete [ 33.770515] scsi 0:0:0:0: Direct-Access Generic STORAGE DEVICE 0119 PQ: 0 ANSI: 0 [ 33.771502] scsi 0:0:0:1: Direct-Access Generic STORAGE DEVICE 0119 PQ: 0 ANSI: 0 [ 33.772500] scsi 0:0:0:2: Direct-Access Generic STORAGE DEVICE 0119 PQ: 0 ANSI: 0 [ 33.773498] scsi 0:0:0:3: Direct-Access Generic STORAGE DEVICE 0119 PQ: 0 ANSI: 0 [ 38.872601] i2c_adapter i2c-0: nForce2 SMBus adapter at 0x5000 [ 38.872633] i2c_adapter i2c-1: nForce2 SMBus adapter at 0x5500 [ 38.918561] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 38.928218] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 39.065792] Linux agpgart interface v0.101 (c) Dave Jones [ 39.067275] NET: Registered protocol family 17 [ 39.264303] agpgart: Detected NVIDIA nForce2 chipset [ 39.278080] agpgart: AGP aperture is 256M @ 0xc0000000 [ 39.609801] gameport: EMU10K1 is pci0000:01:09.1/gameport0, io 0xd400, speed 903kHz [ 39.738656] input: PC Speaker as /class/input/input2 [ 39.871155] nvidia: module license 'NVIDIA' taints kernel. [ 40.160419] ACPI: PCI Interrupt Link [APC4] enabled at IRQ 19 [ 40.160429] ACPI: PCI Interrupt 0000:02:00.0[A] -> Link [APC4] -> GSI 19 (level, high) -> IRQ 20 [ 40.160785] NVRM: loading NVIDIA Linux x86 Kernel Module 1.0-9631 Thu Nov 9 17:38:10 PST 2006 [ 40.200697] b2c2-flexcop: B2C2 FlexcopII/II(b)/III digital TV receiver chip loaded successfully [ 40.201862] flexcop-pci: will use the HW PID filter. [ 40.201868] flexcop-pci: card revision 1 [ 40.202064] ACPI: PCI Interrupt Link [APC1] enabled at IRQ 16 [ 40.202072] ACPI: PCI Interrupt 0000:01:0a.0[A] -> Link [APC1] -> GSI 16 (level, high) -> IRQ 21 [ 40.215577] DVB: registering new adapter (FlexCop Digital TV device). [ 40.217107] b2c2-flexcop: MAC address = 00:d0:d7:01:e6:db [ 40.217116] **WARNING** I2C adapter driver [B2C2 FlexCop device] forgot to specify physical device; fix it! [ 40.412779] sd 0:0:0:0: Attached scsi removable disk sda [ 40.414635] sd 0:0:0:1: Attached scsi removable disk sdb [ 40.416329] sd 0:0:0:2: Attached scsi removable disk sdc [ 40.418084] sd 0:0:0:3: Attached scsi removable disk sdd [ 40.449410] b2c2-flexcop: found the stv0299 at i2c address: 0x68 [ 40.449416] DVB: registering frontend 0 (ST STV0299 DVB-S)... [ 40.449485] b2c2-flexcop: initialization of 'Sky2PC/SkyStar 2 DVB-S' at the 'PCI' bus controlled by a 'FlexCopII' complete [ 40.515213] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 40.515338] sd 0:0:0:1: Attached scsi generic sg1 type 0 [ 40.515488] sd 0:0:0:2: Attached scsi generic sg2 type 0 [ 40.515615] sd 0:0:0:3: Attached scsi generic sg3 type 0 [ 40.596008] ACPI: PCI Interrupt Link [APC2] enabled at IRQ 17 [ 40.596019] ACPI: PCI Interrupt 0000:01:09.0[A] -> Link [APC2] -> GSI 17 (level, high) -> IRQ 22 [ 40.601002] Installing spdif_bug patch: Audigy 2 ZS [SB0350] [ 40.860435] lp: driver loaded but no devices found [ 40.909510] Adding 530136k swap on /dev/disk/by-uuid/63feb4bc-2e39-4e6e-8ed2-c78cf2137342. Priority:-1 extents:1 across:530136k [ 41.066698] EXT3 FS on hda2, internal journal [ 43.061600] NET: Registered protocol family 10 [ 43.061695] lo: Disabled Privacy Extensions [ 54.019628] eth0: no IPv6 routers present [ 67.628924] kjournald starting. Commit interval 5 seconds [ 67.629217] EXT3 FS on hda5, internal journal [ 67.629222] EXT3-fs: mounted filesystem with ordered data mode. [ 67.660882] kjournald starting. Commit interval 5 seconds [ 67.661251] EXT3 FS on hdc5, internal journal [ 67.661255] EXT3-fs: mounted filesystem with ordered data mode. [ 67.690460] kjournald starting. Commit interval 5 seconds [ 67.690776] EXT3 FS on hdc6, internal journal [ 67.690780] EXT3-fs: mounted filesystem with ordered data mode. [ 73.268991] input: Power Button (FF) as /class/input/input3 [ 73.291569] ACPI: Power Button (FF) [PWRF] [ 73.344814] input: Power Button (CM) as /class/input/input4 [ 73.367360] ACPI: Power Button (CM) [PWRB] [ 73.383460] Using specific hotkey driver [ 73.411122] No dock devices found. [ 73.448059] ibm_acpi: ec object not found [ 75.030863] ppdev: user-space parallel port driver [ 76.280383] agpgart: Found an AGP 3.0 compliant device at 0000:00:00.0. [ 76.280398] agpgart: Putting AGP V3 device at 0000:00:00.0 into 8x mode [ 76.280450] agpgart: Putting AGP V3 device at 0000:02:00.0 into 8x mode [ 77.122636] **WARNING** I2C adapter driver [NVIDIA i2c adapter 0 at 2:00.0] forgot to specify physical device; fix it! [ 77.123328] **WARNING** I2C adapter driver [NVIDIA i2c adapter 1 at 2:00.0] forgot to specify physical device; fix it! [ 77.123780] **WARNING** I2C adapter driver [NVIDIA i2c adapter 2 at 2:00.0] forgot to specify physical device; fix it! [ 78.694492] apm: BIOS version 1.2 Flags 0x07 (Driver version 1.16ac) [ 78.694497] apm: overridden by ACPI. [ 88.435709] Bluetooth: Core ver 2.11 [ 88.436149] NET: Registered protocol family 31 [ 88.436153] Bluetooth: HCI device and connection manager initialized [ 88.436156] Bluetooth: HCI socket layer initialized [ 88.473898] Bluetooth: L2CAP ver 2.8 [ 88.473903] Bluetooth: L2CAP socket layer initialized [ 88.541042] Bluetooth: RFCOMM socket layer initialized [ 88.541143] Bluetooth: RFCOMM TTY layer initialized [ 88.541145] Bluetooth: RFCOMM ver 1.8 [ 101.116532] eth0: no IPv6 routers present [ 9926.792397] usb 1-1: USB disconnect, address 3 [ 9940.315737] usb 3-1: new high speed USB device using ehci_hcd and address 8 [ 9940.449593] usb 3-1: configuration #1 chosen from 1 choice [ 9940.449901] hub 3-1:1.0: USB hub found [ 9940.450250] hub 3-1:1.0: 4 ports detected [ 9943.925646] usb 3-5: reset high speed USB device using ehci_hcd and address 7 [ 9944.037577] usb 3-5: device descriptor read/64, error -71 [ 9944.253452] usb 3-5: device descriptor read/64, error -71 [ 9944.469328] usb 3-5: reset high speed USB device using ehci_hcd and address 7 [ 9944.581262] usb 3-5: device descriptor read/64, error -71 [ 9944.797138] usb 3-5: device descriptor read/64, error -71 [ 9945.013017] usb 3-5: reset high speed USB device using ehci_hcd and address 7 [ 9945.420773] usb 3-5: device not accepting address 7, error -71 [ 9945.532715] usb 3-5: reset high speed USB device using ehci_hcd and address 7 [ 9945.940475] usb 3-5: device not accepting address 7, error -71 [ 9945.940512] usb 3-5: USB disconnect, address 7 [ 9945.945077] scsi 0:0:0:2: rejecting I/O to dead device [ 9945.945171] scsi 0:0:0:2: rejecting I/O to dead device [ 9945.945243] scsi 0:0:0:2: rejecting I/O to dead device [ 9945.945313] scsi 0:0:0:2: rejecting I/O to dead device [ 9945.945383] sdc : READ CAPACITY failed. [ 9945.945384] sdc : status=0, message=00, host=1, driver=00 [ 9945.945387] sdc : sense not available. [ 9945.945555] scsi 0:0:0:2: rejecting I/O to dead device [ 9945.945623] sdc: Write Protect is off [ 9945.945625] sdc: Mode Sense: 00 00 00 00 [ 9945.945627] sdc: assuming drive cache: write through [ 9945.946012] scsi 0:0:0:2: rejecting I/O to dead device [ 9945.946089] scsi 0:0:0:2: rejecting I/O to dead device [ 9945.946158] scsi 0:0:0:2: rejecting I/O to dead device [ 9945.946228] scsi 0:0:0:2: rejecting I/O to dead device [ 9945.946300] scsi 0:0:0:2: rejecting I/O to dead device [ 9945.946370] sdc : READ CAPACITY failed. [ 9945.946371] sdc : status=0, message=00, host=1, driver=00 [ 9945.946373] sdc : sense not available. [ 9945.946546] scsi 0:0:0:2: rejecting I/O to dead device [ 9945.946612] sdc: Write Protect is off [ 9945.946615] sdc: Mode Sense: 00 00 00 00 [ 9945.946616] sdc: assuming drive cache: write through [ 9945.946778] scsi 0:0:0:2: rejecting I/O to dead device [ 9945.948611] scsi 0:0:0:0: rejecting I/O to dead device [ 9945.948699] scsi 0:0:0:0: rejecting I/O to dead device [ 9945.948775] scsi 0:0:0:0: rejecting I/O to dead device [ 9945.948844] scsi 0:0:0:0: rejecting I/O to dead device [ 9945.948914] sda : READ CAPACITY failed. [ 9945.948915] sda : status=0, message=00, host=1, driver=00 [ 9945.948917] sda : sense not available. [ 9945.949086] scsi 0:0:0:0: rejecting I/O to dead device [ 9945.949153] sda: Write Protect is off [ 9945.949156] sda: Mode Sense: 00 00 00 00 [ 9945.949157] sda: assuming drive cache: write through [ 9945.949314] scsi 0:0:0:0: rejecting I/O to dead device [ 9945.949392] scsi 0:0:0:0: rejecting I/O to dead device [ 9945.949461] scsi 0:0:0:0: rejecting I/O to dead device [ 9945.949532] scsi 0:0:0:0: rejecting I/O to dead device [ 9945.949603] scsi 0:0:0:0: rejecting I/O to dead device [ 9945.949672] sda : READ CAPACITY failed. [ 9945.949674] sda : status=0, message=00, host=1, driver=00 [ 9945.949676] sda : sense not available. [ 9945.949843] scsi 0:0:0:0: rejecting I/O to dead device [ 9945.949909] sda: Write Protect is off [ 9945.949911] sda: Mode Sense: 00 00 00 00 [ 9945.949913] sda: assuming drive cache: write through [ 9945.950078] scsi 0:0:0:0: rejecting I/O to dead device [ 9945.951430] scsi 0:0:0:1: rejecting I/O to dead device [ 9945.951512] scsi 0:0:0:1: rejecting I/O to dead device [ 9945.951592] scsi 0:0:0:1: rejecting I/O to dead device [ 9945.951661] scsi 0:0:0:1: rejecting I/O to dead device [ 9945.951727] sdb : READ CAPACITY failed. [ 9945.951728] sdb : status=0, message=00, host=1, driver=00 [ 9945.951731] sdb : sense not available. [ 9945.951890] scsi 0:0:0:1: rejecting I/O to dead device [ 9945.951960] sdb: Write Protect is off [ 9945.951962] sdb: Mode Sense: 00 00 00 00 [ 9945.951964] sdb: assuming drive cache: write through [ 9945.952127] scsi 0:0:0:1: rejecting I/O to dead device [ 9945.952197] scsi 0:0:0:1: rejecting I/O to dead device [ 9945.952266] scsi 0:0:0:1: rejecting I/O to dead device [ 9945.952336] scsi 0:0:0:1: rejecting I/O to dead device [ 9945.952404] scsi 0:0:0:1: rejecting I/O to dead device [ 9945.955695] sdb : READ CAPACITY failed. [ 9945.955698] sdb : status=0, message=00, host=1, driver=00 [ 9945.955702] sdb : sense not available. [ 9945.955882] scsi 0:0:0:1: rejecting I/O to dead device [ 9945.955953] sdb: Write Protect is off [ 9945.955955] sdb: Mode Sense: 00 00 00 00 [ 9945.955957] sdb: assuming drive cache: write through [ 9945.956316] scsi 0:0:0:1: rejecting I/O to dead device [ 9945.957985] scsi 0:0:0:3: rejecting I/O to dead device [ 9945.958078] scsi 0:0:0:3: rejecting I/O to dead device [ 9945.958147] scsi 0:0:0:3: rejecting I/O to dead device [ 9945.958213] scsi 0:0:0:3: rejecting I/O to dead device [ 9945.958280] sdd : READ CAPACITY failed. [ 9945.958281] sdd : status=0, message=00, host=1, driver=00 [ 9945.958284] sdd : sense not available. [ 9945.958444] scsi 0:0:0:3: rejecting I/O to dead device [ 9945.958507] sdd: Write Protect is off [ 9945.958510] sdd: Mode Sense: 00 00 00 00 [ 9945.958512] sdd: assuming drive cache: write through [ 9945.958660] scsi 0:0:0:3: rejecting I/O to dead device [ 9945.958731] scsi 0:0:0:3: rejecting I/O to dead device [ 9945.958796] scsi 0:0:0:3: rejecting I/O to dead device [ 9945.958862] scsi 0:0:0:3: rejecting I/O to dead device [ 9945.958927] scsi 0:0:0:3: rejecting I/O to dead device [ 9945.958992] sdd : READ CAPACITY failed. [ 9945.958993] sdd : status=0, message=00, host=1, driver=00 [ 9945.958995] sdd : sense not available. [ 9945.959153] scsi 0:0:0:3: rejecting I/O to dead device [ 9945.959216] sdd: Write Protect is off [ 9945.959218] sdd: Mode Sense: 00 00 00 00 [ 9945.959220] sdd: assuming drive cache: write through [ 9945.959375] scsi 0:0:0:3: rejecting I/O to dead device [ 9946.052421] usb 3-5: new high speed USB device using ehci_hcd and address 9 [ 9946.164358] usb 3-5: device descriptor read/64, error -71 [ 9946.380229] usb 3-5: device descriptor read/64, error -71 [ 9946.596106] usb 3-5: new high speed USB device using ehci_hcd and address 10 [ 9946.708039] usb 3-5: device descriptor read/64, error -71 [ 9946.923918] usb 3-5: device descriptor read/64, error -71 [ 9947.139791] usb 3-5: new high speed USB device using ehci_hcd and address 11 [ 9947.547551] usb 3-5: device not accepting address 11, error -71 [ 9947.659493] usb 3-5: new high speed USB device using ehci_hcd and address 12 [ 9948.067252] usb 3-5: device not accepting address 12, error -71 [ 9950.489872] usb 3-5: new high speed USB device using ehci_hcd and address 13 [ 9950.601808] usb 3-5: device descriptor read/64, error -71 [ 9950.817679] usb 3-5: device descriptor read/64, error -71 [ 9951.033555] usb 3-5: new high speed USB device using ehci_hcd and address 14 [ 9951.145493] usb 3-5: device descriptor read/64, error -71 [ 9951.361366] usb 3-5: device descriptor read/64, error -71 [ 9951.577243] usb 3-5: new high speed USB device using ehci_hcd and address 15 [ 9951.984998] usb 3-5: device not accepting address 15, error -71 [ 9952.096947] usb 3-5: new high speed USB device using ehci_hcd and address 16 [ 9952.504700] usb 3-5: device not accepting address 16, error -71 [ 9952.720825] usb 3-1.1: new low speed USB device using ehci_hcd and address 17 [ 9952.838185] usb 3-1.1: configuration #1 chosen from 1 choice [ 9952.841345] input: KYE Systems Corp. Wireless Keyboard & Mouse as /class/input/input5 [ 9952.841393] input: USB HID v1.10 Keyboard [KYE Systems Corp. Wireless Keyboard & Mouse] on usb-0000:00:02.2-1.1 [ 9952.846151] input: KYE Systems Corp. Wireless Keyboard & Mouse as /class/input/input6 [ 9952.846223] input: USB HID v1.10 Mouse [KYE Systems Corp. Wireless Keyboard & Mouse] on usb-0000:00:02.2-1.1 [ 9956.419678] drivers/usb/input/hid-core.c: event field not found [ 9956.427672] drivers/usb/input/hid-core.c: event field not found [ 9963.101983] drivers/usb/input/hid-core.c: event field not found [ 9963.117978] drivers/usb/input/hid-core.c: event field not found [ 9969.032940] drivers/usb/input/hid-core.c: event field not found [ 9969.048931] drivers/usb/input/hid-core.c: event field not found [ 9984.254224] usb 1-2: new full speed USB device using ohci_hcd and address 8 [ 9984.438110] usb 1-2: device descriptor read/64, error -62 [ 9984.725955] usb 1-2: device descriptor read/64, error -62 [ 9985.005788] usb 1-2: new full speed USB device using ohci_hcd and address 9 [ 9985.189671] usb 1-2: device descriptor read/64, error -62 [ 9985.473508] usb 1-2: device descriptor read/64, error -62 [ 9985.753345] usb 1-2: new full speed USB device using ohci_hcd and address 10 [ 9986.169100] usb 1-2: device not accepting address 10, error -62 [ 9986.345008] usb 1-2: new full speed USB device using ohci_hcd and address 11 [ 9986.760751] usb 1-2: device not accepting address 11, error -62 [ 9996.057954] drivers/usb/input/hid-core.c: event field not found [ 9996.065952] drivers/usb/input/hid-core.c: event field not found [10004.754537] drivers/usb/input/hid-core.c: event field not found [10004.770529] drivers/usb/input/hid-core.c: event field not found [10012.547906] drivers/usb/input/hid-core.c: event field not found [10012.563896] drivers/usb/input/hid-core.c: event field not found [10023.306750] drivers/usb/input/hid-core.c: event field not found [10023.314747] drivers/usb/input/hid-core.c: event field not found Bus 003 Device 017: ID 0458:0048 KYE Systems Corp. (Mouse Systems) Bus 003 Device 008: ID 05e3:0660 Genesys Logic, Inc. USB 2.0 Hub Bus 003 Device 001: ID 0000:0000 Bus 002 Device 001: ID 0000:0000 Bus 001 Device 001: ID 0000:0000 -- mouse pointer is jumping and clicking while moving https://launchpad.net/bugs/85842 -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
