I am having the same problem as the person who originally posted this bug. here is my dmesg readout.
[ 0.885188] system 00:0a: ioport range 0x2900-0x29fe has been reserved [ 0.885191] system 00:0a: ioport range 0x2a00-0x2afe has been reserved [ 0.885195] system 00:0a: ioport range 0x2b00-0x2bfe has been reserved [ 0.885198] system 00:0a: ioport range 0x2c00-0x2cfe has been reserved [ 0.885201] system 00:0a: ioport range 0x2d00-0x2dfe has been reserved [ 0.885205] system 00:0a: ioport range 0x2e00-0x2efe has been reserved [ 0.885210] system 00:0a: ioport range 0x2f00-0x2ffe has been reserved [ 0.885214] system 00:0a: ioport range 0x5000-0x50fe has been reserved [ 0.885218] system 00:0a: ioport range 0x5100-0x51fe has been reserved [ 0.885221] system 00:0a: ioport range 0x5200-0x52fe has been reserved [ 0.885224] system 00:0a: ioport range 0x5300-0x53fe has been reserved [ 0.885228] system 00:0a: ioport range 0x5400-0x54fe has been reserved [ 0.885231] system 00:0a: ioport range 0x5500-0x55fe has been reserved [ 0.885235] system 00:0a: ioport range 0x5600-0x56fe has been reserved [ 0.885238] system 00:0a: ioport range 0x5700-0x57fe has been reserved [ 0.885242] system 00:0a: ioport range 0x5800-0x58fe has been reserved [ 0.885245] system 00:0a: ioport range 0x5900-0x59fe has been reserved [ 0.885249] system 00:0a: ioport range 0x5a00-0x5afe has been reserved [ 0.885252] system 00:0a: ioport range 0x5b00-0x5bfe has been reserved [ 0.885256] system 00:0a: ioport range 0x5c00-0x5cfe has been reserved [ 0.885259] system 00:0a: ioport range 0x5d00-0x5dfe has been reserved [ 0.885262] system 00:0a: ioport range 0x5e00-0x5efe has been reserved [ 0.885266] system 00:0a: ioport range 0x5f00-0x5ffe has been reserved [ 0.885269] system 00:0a: ioport range 0x6000-0x60fe has been reserved [ 0.885273] system 00:0a: ioport range 0x6100-0x61fe has been reserved [ 0.885276] system 00:0a: ioport range 0x6200-0x62fe has been reserved [ 0.885280] system 00:0a: ioport range 0x6300-0x63fe has been reserved [ 0.885283] system 00:0a: ioport range 0x6400-0x64fe has been reserved [ 0.885287] system 00:0a: ioport range 0x6500-0x65fe has been reserved [ 0.885290] system 00:0a: ioport range 0x6600-0x66fe has been reserved [ 0.885294] system 00:0a: ioport range 0x6700-0x67fe has been reserved [ 0.885297] system 00:0a: ioport range 0x6800-0x68fe has been reserved [ 0.885301] system 00:0a: ioport range 0x6900-0x69fe has been reserved [ 0.885305] system 00:0a: ioport range 0x6a00-0x6afe has been reserved [ 0.885308] system 00:0a: ioport range 0x6b00-0x6bfe has been reserved [ 0.885312] system 00:0a: ioport range 0x6c00-0x6cfe has been reserved [ 0.885316] system 00:0a: ioport range 0x6d00-0x6dfe has been reserved [ 0.885319] system 00:0a: ioport range 0x6e00-0x6efe has been reserved [ 0.885323] system 00:0a: ioport range 0x6f00-0x6ffe has been reserved [ 0.885327] system 00:0a: ioport range 0xa000-0xa0fe has been reserved [ 0.885331] system 00:0a: ioport range 0xa100-0xa1fe has been reserved [ 0.885335] system 00:0a: ioport range 0xa200-0xa2fe has been reserved [ 0.885338] system 00:0a: ioport range 0xa300-0xa3fe has been reserved [ 0.885342] system 00:0a: ioport range 0xa400-0xa4fe has been reserved [ 0.885346] system 00:0a: ioport range 0xa500-0xa5fe has been reserved [ 0.885350] system 00:0a: ioport range 0xa600-0xa6fe has been reserved [ 0.885354] system 00:0a: ioport range 0xa700-0xa7fe has been reserved [ 0.885357] system 00:0a: ioport range 0xa800-0xa8fe has been reserved [ 0.885361] system 00:0a: ioport range 0xa900-0xa9fe has been reserved [ 0.885365] system 00:0a: ioport range 0xaa00-0xaafe has been reserved [ 0.885369] system 00:0a: ioport range 0xab00-0xabfe has been reserved [ 0.885373] system 00:0a: ioport range 0xac00-0xacfe has been reserved [ 0.885377] system 00:0a: ioport range 0xad00-0xadfe has been reserved [ 0.885381] system 00:0a: ioport range 0xae00-0xaefe has been reserved [ 0.885385] system 00:0a: ioport range 0xaf00-0xaffe has been reserved [ 0.885389] system 00:0a: iomem range 0xe0000000-0xefffffff has been reserved [ 0.885392] system 00:0a: iomem range 0xfeda0000-0xfedacfff has been reserved [ 0.920164] pci 0000:00:01.0: PCI bridge, secondary bus 0000:01 [ 0.920169] pci 0000:00:01.0: IO window: 0xd000-0xdfff [ 0.920175] pci 0000:00:01.0: MEM window: 0xdfd00000-0xdfefffff [ 0.920179] pci 0000:00:01.0: PREFETCH window: 0x000000d0000000-0x000000d7ffffff [ 0.920186] pci 0000:00:1c.0: PCI bridge, secondary bus 0000:02 [ 0.920188] pci 0000:00:1c.0: IO window: disabled [ 0.920194] pci 0000:00:1c.0: MEM window: 0xdfc00000-0xdfcfffff [ 0.920199] pci 0000:00:1c.0: PREFETCH window: disabled [ 0.920206] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:03 [ 0.920210] pci 0000:00:1e.0: IO window: 0xc000-0xcfff [ 0.920216] pci 0000:00:1e.0: MEM window: 0xdc000000-0xdfbfffff [ 0.920221] pci 0000:00:1e.0: PREFETCH window: disabled [ 0.920239] pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 0.920244] pci 0000:00:01.0: setting latency timer to 64 [ 0.920253] pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 0.920258] pci 0000:00:1c.0: setting latency timer to 64 [ 0.920266] pci 0000:00:1e.0: setting latency timer to 64 [ 0.920271] bus: 00 index 0 io port: [0x00-0xffff] [ 0.920274] bus: 00 index 1 mmio: [0x000000-0xffffffff] [ 0.920277] bus: 01 index 0 io port: [0xd000-0xdfff] [ 0.920279] bus: 01 index 1 mmio: [0xdfd00000-0xdfefffff] [ 0.920282] bus: 01 index 2 mmio: [0xd0000000-0xd7ffffff] [ 0.920284] bus: 01 index 3 mmio: [0x0-0x0] [ 0.920287] bus: 02 index 0 mmio: [0x0-0x0] [ 0.920289] bus: 02 index 1 mmio: [0xdfc00000-0xdfcfffff] [ 0.920292] bus: 02 index 2 mmio: [0x0-0x0] [ 0.920294] bus: 02 index 3 mmio: [0x0-0x0] [ 0.920297] bus: 03 index 0 io port: [0xc000-0xcfff] [ 0.920299] bus: 03 index 1 mmio: [0xdc000000-0xdfbfffff] [ 0.920302] bus: 03 index 2 mmio: [0x0-0x0] [ 0.920304] bus: 03 index 3 io port: [0x00-0xffff] [ 0.920306] bus: 03 index 4 mmio: [0x000000-0xffffffff] [ 0.920316] NET: Registered protocol family 2 [ 0.932082] IP route cache hash table entries: 32768 (order: 5, 131072 bytes) [ 0.932428] TCP established hash table entries: 131072 (order: 8, 1048576 bytes) [ 0.932803] TCP bind hash table entries: 65536 (order: 7, 524288 bytes) [ 0.933031] TCP: Hash tables configured (established 131072 bind 65536) [ 0.933034] TCP reno registered [ 0.940126] NET: Registered protocol family 1 [ 0.940303] checking if image is initramfs... it is [ 1.575222] Freeing initrd memory: 7381k freed [ 1.575261] Simple Boot Flag at 0x7a set to 0x1 [ 1.575294] cpufreq: No nForce2 chipset. [ 1.575458] audit: initializing netlink socket (disabled) [ 1.575474] type=2000 audit(1258781426.572:1): initialized [ 1.583977] highmem bounce pool size: 64 pages [ 1.583984] HugeTLB registered 4 MB page size, pre-allocated 0 pages [ 1.585645] VFS: Disk quotas dquot_6.5.1 [ 1.585726] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 1.586571] fuse init (API version 7.10) [ 1.586682] msgmni has been set to 1671 [ 1.587086] alg: No test for stdrng (krng) [ 1.587107] io scheduler noop registered [ 1.587112] io scheduler anticipatory registered [ 1.587116] io scheduler deadline registered [ 1.587144] io scheduler cfq registered (default) [ 1.587252] pci 0000:01:00.0: Boot video device [ 1.587284] pci 0000:03:08.0: Firmware left e100 interrupts enabled; disabling [ 1.606218] pcieport-driver 0000:00:01.0: setting latency timer to 64 [ 1.606265] pcieport-driver 0000:00:01.0: found MSI capability [ 1.606295] pcieport-driver 0000:00:01.0: irq 2303 for MSI/MSI-X [ 1.606307] pci_express 0000:00:01.0:pcie00: allocate port service [ 1.606329] pci_express 0000:00:01.0:pcie03: allocate port service [ 1.606392] pcieport-driver 0000:00:1c.0: setting latency timer to 64 [ 1.606433] pcieport-driver 0000:00:1c.0: found MSI capability [ 1.606461] pcieport-driver 0000:00:1c.0: irq 2302 for MSI/MSI-X [ 1.606475] pci_express 0000:00:1c.0:pcie00: allocate port service [ 1.606493] pci_express 0000:00:1c.0:pcie02: allocate port service [ 1.606514] pci_express 0000:00:1c.0:pcie03: allocate port service [ 1.606600] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 1.610824] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 [ 1.610984] input: Power Button (FF) as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0 [ 1.610988] ACPI: Power Button (FF) [PWRF] [ 1.611046] input: Power Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1 [ 1.611055] ACPI: Power Button (CM) [VBTN] [ 1.611520] processor ACPI_CPU:00: registered as cooling_device0 [ 1.611572] processor ACPI_CPU:01: registered as cooling_device1 [ 1.639347] isapnp: Scanning for PnP cards... [ 1.991029] isapnp: No Plug & Play device found [ 2.000292] Serial: 8250/16550 driver4 ports, IRQ sharing enabled [ 2.000397] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 2.000840] 00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 2.001896] brd: module loaded [ 2.002352] loop: module loaded [ 2.002452] Fixed MDIO Bus: probed [ 2.002458] PPP generic driver version 2.4.2 [ 2.002536] input: Macintosh mouse button emulation as /devices/virtual/input/input2 [ 2.002578] Driver 'sd' needs updating - please use bus_type methods [ 2.002591] Driver 'sr' needs updating - please use bus_type methods [ 2.002683] ata_piix 0000:00:1f.1: version 2.12 [ 2.002694] ata_piix 0000:00:1f.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 2.002742] ata_piix 0000:00:1f.1: setting latency timer to 64 [ 2.002850] scsi0 : ata_piix [ 2.002986] scsi1 : ata_piix [ 2.003038] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xffa0 irq 14 [ 2.003042] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xffa8 irq 15 [ 2.172360] ata1.00: ATAPI: PIONEER DVD-RW DVR-107D, 1.09, max UDMA/33 [ 2.172409] ata1.01: ATAPI: HL-DT-ST RW/DVD GCC-4480B, GW02, max UDMA/33 [ 2.180316] ata1.00: configured for UDMA/33 [ 2.196303] ata1.01: configured for UDMA/33 [ 2.203029] ata2: port disabled. ignoring. [ 2.208866] scsi 0:0:0:0: CD-ROM PIONEER DVD-RW DVR-107D 1.09 PQ: 0 ANSI: 5 [ 2.232147] sr0: scsi3-mmc drive: 40x/40x writer cd/rw xa/form2 cdda tray [ 2.232152] Uniform CD-ROM driver Revision: 3.20 [ 2.232279] sr 0:0:0:0: Attached scsi CD-ROM sr0 [ 2.232340] sr 0:0:0:0: Attached scsi generic sg0 type 5 [ 2.232870] scsi 0:0:1:0: CD-ROM HL-DT-ST RW/DVD GCC-4480B GW02 PQ: 0 ANSI: 5 [ 2.234784] sr1: scsi3-mmc drive: 48x/48x writer cd/rw xa/form2 cdda tray [ 2.234865] sr 0:0:1:0: Attached scsi CD-ROM sr1 [ 2.234916] sr 0:0:1:0: Attached scsi generic sg1 type 5 [ 2.234944] ata_piix 0000:00:1f.2: PCI INT C -> GSI 20 (level, low) -> IRQ 20 [ 2.234949] ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ] [ 2.388031] ata_piix 0000:00:1f.2: setting latency timer to 64 [ 2.388110] scsi2 : ata_piix [ 2.388204] scsi3 : ata_piix [ 2.388257] ata3: SATA max UDMA/133 cmd 0xfe00 ctl 0xfe10 bmdma 0xfea0 irq 20 [ 2.388261] ata4: SATA max UDMA/133 cmd 0xfe20 ctl 0xfe30 bmdma 0xfea8 irq 20 [ 2.560316] ata3.00: ATA-7: WDC WD1600JS-75MHB0, 03.01C03, max UDMA/133 [ 2.560320] ata3.00: 312500000 sectors, multi 8: LBA48 [ 2.560574] ata3.01: ATA-7: ST3160828AS, 8.03, max UDMA/133 [ 2.560578] ata3.01: 312500000 sectors, multi 8: LBA48 NCQ (depth 0/32) [ 2.568344] ata3.00: configured for UDMA/133 [ 2.584357] ata3.01: configured for UDMA/133 [ 4.420161] scsi 2:0:0:0: Direct-Access ATA WDC WD1600JS-75M 03.0 PQ: 0 ANSI: 5 [ 4.420292] sd 2:0:0:0: [sda] 312500000 512-byte hardware sectors: (160 GB/149 GiB) [ 4.420316] sd 2:0:0:0: [sda] Write Protect is off [ 4.420319] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 4.420358] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 4.420438] sd 2:0:0:0: [sda] 312500000 512-byte hardware sectors: (160 GB/149 GiB) [ 4.420459] sd 2:0:0:0: [sda] Write Protect is off [ 4.420463] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 4.420502] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 4.420510] sda: sda1 sda2 < sda5 > [ 4.479943] sd 2:0:0:0: [sda] Attached SCSI disk [ 4.480027] sd 2:0:0:0: Attached scsi generic sg2 type 0 [ 4.480143] scsi 2:0:1:0: Direct-Access ATA ST3160828AS 8.03 PQ: 0 ANSI: 5 [ 4.480259] sd 2:0:1:0: [sdb] 312500000 512-byte hardware sectors: (160 GB/149 GiB) [ 4.480282] sd 2:0:1:0: [sdb] Write Protect is off [ 4.480286] sd 2:0:1:0: [sdb] Mode Sense: 00 3a 00 00 [ 4.480324] sd 2:0:1:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 4.480394] sd 2:0:1:0: [sdb] 312500000 512-byte hardware sectors: (160 GB/149 GiB) [ 4.480417] sd 2:0:1:0: [sdb] Write Protect is off [ 4.480420] sd 2:0:1:0: [sdb] Mode Sense: 00 3a 00 00 [ 4.480458] sd 2:0:1:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 4.480462] sdb: sdb1 sdb2 < sdb5 > [ 4.525271] sd 2:0:1:0: [sdb] Attached SCSI disk [ 4.525326] sd 2:0:1:0: Attached scsi generic sg3 type 0 [ 4.526240] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 4.526267] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 21 (level, low) -> IRQ 21 [ 4.526296] ehci_hcd 0000:00:1d.7: setting latency timer to 64 [ 4.526301] ehci_hcd 0000:00:1d.7: EHCI Host Controller [ 4.526380] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1 [ 4.530304] ehci_hcd 0000:00:1d.7: debug port 1 [ 4.530311] ehci_hcd 0000:00:1d.7: cache line size of 128 is not supported [ 4.530327] ehci_hcd 0000:00:1d.7: irq 21, io mem 0xffa80800 [ 4.544014] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00 [ 4.544106] usb usb1: configuration #1 chosen from 1 choice [ 4.544145] hub 1-0:1.0: USB hub found [ 4.544155] hub 1-0:1.0: 8 ports detected [ 4.544315] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 4.544339] uhci_hcd: USB Universal Host Controller Interface driver [ 4.544380] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21 [ 4.544390] uhci_hcd 0000:00:1d.0: setting latency timer to 64 [ 4.544394] uhci_hcd 0000:00:1d.0: UHCI Host Controller [ 4.544452] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2 [ 4.544478] uhci_hcd 0000:00:1d.0: irq 21, io base 0x0000ff80 [ 4.544572] usb usb2: configuration #1 chosen from 1 choice [ 4.544607] hub 2-0:1.0: USB hub found [ 4.544616] hub 2-0:1.0: 2 ports detected [ 4.544727] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 22 (level, low) -> IRQ 22 [ 4.544735] uhci_hcd 0000:00:1d.1: setting latency timer to 64 [ 4.544739] uhci_hcd 0000:00:1d.1: UHCI Host Controller [ 4.544801] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3 [ 4.544833] uhci_hcd 0000:00:1d.1: irq 22, io base 0x0000ff60 [ 4.544923] usb usb3: configuration #1 chosen from 1 choice [ 4.544958] hub 3-0:1.0: USB hub found [ 4.544967] hub 3-0:1.0: 2 ports detected [ 4.545078] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 4.545086] uhci_hcd 0000:00:1d.2: setting latency timer to 64 [ 4.545090] uhci_hcd 0000:00:1d.2: UHCI Host Controller [ 4.545152] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4 [ 4.545184] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000ff40 [ 4.545274] usb usb4: configuration #1 chosen from 1 choice [ 4.545308] hub 4-0:1.0: USB hub found [ 4.545317] hub 4-0:1.0: 2 ports detected [ 4.545435] uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 23 (level, low) -> IRQ 23 [ 4.545443] uhci_hcd 0000:00:1d.3: setting latency timer to 64 [ 4.545446] uhci_hcd 0000:00:1d.3: UHCI Host Controller [ 4.545508] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5 [ 4.545540] uhci_hcd 0000:00:1d.3: irq 23, io base 0x0000ff20 [ 4.545632] usb usb5: configuration #1 chosen from 1 choice [ 4.545666] hub 5-0:1.0: USB hub found [ 4.545675] hub 5-0:1.0: 2 ports detected [ 4.545850] PNP: PS/2 Controller [PNP0303:KBD] at 0x60,0x64 irq 1 [ 4.545853] PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp [ 4.546383] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 4.548059] mice: PS/2 mouse device common for all mice [ 4.560098] rtc_cmos 00:05: RTC can wake from S4 [ 4.560148] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0 [ 4.560177] rtc0: alarms up to one day, 242 bytes nvram, hpet irqs [ 4.560261] device-mapper: uevent: version 1.0.3 [ 4.560393] device-mapper: ioctl: 4.14.0-ioctl (2008-04-23) initialised: [email protected] [ 4.560519] device-mapper: multipath: version 1.0.5 loaded [ 4.560525] device-mapper: multipath round-robin: version 1.0.0 loaded [ 4.560641] EISA: Probing bus 0 at eisa.0 [ 4.560645] EISA: Cannot allocate resource for mainboard [ 4.560652] Cannot allocate resource for EISA slot 2 [ 4.560663] Cannot allocate resource for EISA slot 5 [ 4.560666] Cannot allocate resource for EISA slot 6 [ 4.560677] EISA: Detected 0 cards. [ 4.560753] cpuidle: using governor ladder [ 4.560757] cpuidle: using governor menu [ 4.561479] TCP cubic registered [ 4.561574] NET: Registered protocol family 10 [ 4.562162] lo: Disabled Privacy Extensions [ 4.562641] NET: Registered protocol family 17 [ 4.562668] Bluetooth: L2CAP ver 2.11 [ 4.562671] Bluetooth: L2CAP socket layer initialized [ 4.562674] Bluetooth: SCO (Voice Link) ver 0.6 [ 4.562676] Bluetooth: SCO socket layer initialized [ 4.562725] Bluetooth: RFCOMM socket layer initialized [ 4.562737] Bluetooth: RFCOMM TTY layer initialized [ 4.562741] Bluetooth: RFCOMM ver 1.10 [ 4.562812] Using IPI No-Shortcut mode [ 4.562924] registered taskstats version 1 [ 4.563079] Magic number: 1:614:517 [ 4.563159] rtc_cmos 00:05: setting system clock to 2009-11-21 05:30:30 UTC (1258781430) [ 4.563163] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 4.563165] EDD information not available. [ 4.563501] Freeing unused kernel memory: 532k freed [ 4.563674] Write protecting the kernel text: 4120k [ 4.563735] Write protecting the kernel read-only data: 1524k [ 4.592621] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3 [ 5.019689] e100: Intel(R) PRO/100 Network Driver, 3.5.23-k6-NAPI [ 5.019695] e100: Copyright(c) 1999-2006 Intel Corporation [ 5.019761] e100 0000:03:08.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20 [ 5.044139] e100 0000:03:08.0: PME# disabled [ 5.074786] e100: eth0: e100_probe: addr 0xdfbef000, irq 20, MAC addr 00:13:20:4f:8c:d3 [ 5.104048] usb 2-1: new low speed USB device using uhci_hcd and address 2 [ 5.277808] usb 2-1: configuration #1 chosen from 1 choice [ 5.398580] usbcore: registered new interface driver hiddev [ 5.414086] input: Dell Dell USB Mouse as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1:1.0/input/input4 [ 5.636145] generic-usb 0003:413C:3200.0001: input,hidraw0: USB HID v1.10 Mouse [Dell Dell USB Mouse] on usb-0000:00:1d.0-1/input0 [ 5.636176] usbcore: registered new interface driver usbhid [ 5.636182] usbhid: v2.6:USB HID core driver [ 5.747264] PM: Starting manual resume from disk [ 5.747272] PM: Resume from partition 8:5 [ 5.747276] PM: Checking hibernation image. [ 5.747587] PM: Resume from disk failed. [ 5.802598] kjournald starting. Commit interval 5 seconds [ 5.802610] EXT3-fs: mounted filesystem with ordered data mode. [ 12.764583] udev: starting version 141 [ 13.322291] parport_pc 00:07: reported by Plug and Play ACPI [ 13.322362] parport0: PC-style at 0x378 (0x778), irq 7, using FIFO [PCSPP,TRISTATE,COMPAT,ECP] [ 13.885756] ppdev: user-space parallel port driver [ 14.009577] dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2) [ 14.113887] input: PC Speaker as /devices/platform/pcspkr/input/input5 [ 14.267017] cfg80211: Calling CRDA to update world regulatory domain [ 14.285851] intel_rng: Firmware space is locked read-only. If you can't or [ 14.285855] intel_rng: don't want to disable this in firmware setup, and if [ 14.285858] intel_rng: you are certain that your system has a functional [ 14.285860] intel_rng: RNG, try using the 'no_fwh_detect' option. [ 14.363064] cfg80211: World regulatory domain updated: [ 14.363069] (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 14.363073] (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 14.363077] (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 14.363080] (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 14.363083] (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 14.363086] (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 14.369393] Linux agpgart interface v0.103 [ 14.663628] Linux video capture interface: v2.00 [ 14.788258] iTCO_vendor_support: vendor-support=0 [ 14.790682] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.05 [ 14.791217] iTCO_wdt: Found a ICH6 or ICH6R TCO device (Version=2, TCOBASE=0x0860) [ 14.791372] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0) [ 15.086296] ath5k_pci 0000:03:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 15.086378] ath5k_pci 0000:03:00.0: registered as 'phy0' [ 15.173069] phy0: Selected rate control algorithm 'pid' [ 15.312826] cx88/0: cx2388x v4l2 driver version 0.0.6 loaded [ 15.317734] cx88/2: cx2388x MPEG-TS Driver Manager version 0.0.6 loaded [ 15.391150] ath5k phy0: Atheros AR2413 chip found (MAC: 0x78, PHY: 0x45) [ 15.391209] cx8800 0000:03:01.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 [ 15.392262] cx88[0]: subsystem: 11bd:0051, board: Pinnacle PCTV HD 800i [card=58,autodetected], frontend(s): 1 [ 15.392266] cx88[0]: TV tuner type 76, Radio tuner type -1 [ 15.397187] udev: renamed network interface wlan0 to wlan1 [ 15.523056] cx2388x alsa driver version 0.0.6 loaded [ 15.619535] tuner' 0-0064: chip found @ 0xc8 (cx88[0]) [ 15.879368] Intel ICH 0000:00:1e.2: PCI INT A -> GSI 23 (level, low) -> IRQ 23 [ 15.879460] Intel ICH 0000:00:1e.2: setting latency timer to 64 [ 15.923545] xc5000 0-0064: creating new instance [ 15.924197] xc5000: Successfully identified at address 0x64 [ 15.924200] xc5000: Firmware has not been loaded previously [ 15.924939] xc5000: waiting for firmware upload (dvb-fe-xc5000-1.1.fw)... [ 15.924944] i2c-adapter i2c-0: firmware: requesting dvb-fe-xc5000-1.1.fw [ 15.990798] xc5000: Upload failed. (file not found?) [ 15.990806] xc5000: Unable to initialise tuner [ 15.990993] input: cx88 IR (Pinnacle PCTV HD 800i) as /devices/pci0000:00/0000:00:1e.0/0000:03:01.0/input/input6 [ 16.000165] cx88[0]/0: found at 0000:03:01.0, rev: 5, irq: 17, latency: 64, mmio: 0xdc000000 [ 16.000318] cx88[0]/0: registered device video0 [v4l2] [ 16.000428] cx88[0]/0: registered device vbi0 [ 16.001760] xc5000: waiting for firmware upload (dvb-fe-xc5000-1.1.fw)... [ 16.001765] i2c-adapter i2c-0: firmware: requesting dvb-fe-xc5000-1.1.fw [ 16.004999] xc5000: Upload failed. (file not found?) [ 16.300016] intel8x0_measure_ac97_clock: measured 51865 usecs [ 16.300020] intel8x0: clocking to 48000 [ 17.048493] i2c-adapter i2c-0: sendbytes: NAK bailout. [ 17.048512] xc5000: I2C write failed (len=4) [ 17.048515] xc5000: xc_SetTVStandard failed [ 17.048820] cx88[0]/2: cx2388x 8802 Driver Manager [ 17.048843] cx88-mpeg driver manager 0000:03:01.2: PCI INT A -> GSI 17 (level, low) -> IRQ 17 [ 17.048858] cx88[0]/2: found at 0000:03:01.2, rev: 5, irq: 17, latency: 64, mmio: 0xde000000 [ 17.048872] cx8802_probe() allocating 1 frontend(s) [ 17.049124] cx88_audio 0000:03:01.1: PCI INT A -> GSI 17 (level, low) -> IRQ 17 [ 17.049174] cx88[0]/1: CX88x/0: ALSA support for cx2388x boards [ 17.059606] cx88/2: cx2388x dvb driver version 0.0.6 loaded [ 17.059612] cx88/2: registering cx8802 driver, type: dvb access: shared [ 17.059619] cx88[0]/2: subsystem: 11bd:0051, board: Pinnacle PCTV HD 800i [card=58] [ 17.059624] cx88[0]/2: cx2388x based DVB/ATSC card [ 17.196025] xc5000 0-0064: attaching existing instance [ 17.197061] xc5000: Successfully identified at address 0x64 [ 17.197066] xc5000: Firmware has not been loaded previously [ 17.198430] DVB: registering new adapter (cx88[0]) [ 17.198438] DVB: registering adapter 0 frontend 0 (Samsung S5H1409 QAM/8VSB Frontend)... [ 17.242787] lp0: using parport0 (interrupt-driven). [ 17.382307] Adding 6385796k swap on /dev/sda5. Priority:-1 extents:1 across:6385796k [ 17.935299] EXT3 FS on sda1, internal journal [ 19.005788] type=1505 audit(1258781444.940:2): operation="profile_load" name="/usr/share/gdm/guest-session/Xsession" name2="default" pid=2136 [ 19.061296] type=1505 audit(1258781444.996:3): operation="profile_load" name="/sbin/dhclient-script" name2="default" pid=2140 [ 19.061433] type=1505 audit(1258781444.996:4): operation="profile_load" name="/sbin/dhclient3" name2="default" pid=2140 [ 19.061486] type=1505 audit(1258781444.996:5): operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" name2="default" pid=2140 [ 19.061534] type=1505 audit(1258781444.996:6): operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" name2="default" pid=2140 [ 19.113133] type=1505 audit(1258781445.048:7): operation="profile_load" name="/usr/bin/freshclam" name2="default" pid=2145 [ 19.265580] type=1505 audit(1258781445.200:8): operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" name2="default" pid=2149 [ 19.265781] type=1505 audit(1258781445.200:9): operation="profile_load" name="/usr/sbin/cupsd" name2="default" pid=2149 [ 19.299485] type=1505 audit(1258781445.232:10): operation="profile_load" name="/usr/sbin/tcpdump" name2="default" pid=2153 [ 23.006806] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 23.006810] Bluetooth: BNEP filters: protocol multicast [ 23.124088] Bridge firewalling registered [ 24.370235] pci 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 24.628794] [drm] Initialized drm 1.1.0 20060810 [ 25.038394] pci 0000:01:00.0: setting latency timer to 64 [ 25.038597] [drm] Initialized radeon 1.29.0 20080528 on minor 0 [ 25.592076] [drm] Setting GART location based on new memory map [ 25.593391] [drm] Loading R300 Microcode [ 25.593424] [drm] Num pipes: 1 [ 25.593431] [drm] writeback test succeeded in 1 usecs [ 28.081116] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 28.084129] e100: eth0: e100_watchdog: link up, 100Mbps, full-duplex [ 28.108403] ADDRCONF(NETDEV_UP): wlan1: link is not ready [ 28.110827] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 38.324009] eth0: no IPv6 routers present [ 2305.384859] cdrom: sr1: mrw address space DMA selected [ 2305.387037] cdrom open: mrw_status 'not mrw' [ 2305.430564] ISO 9660 Extensions: Microsoft Joliet Level 3 [ 2305.472055] ISO 9660 Extensions: RRIP_1991A [ 2369.896058] UDF-fs: No VRS found [ 2369.940972] ISO 9660 Extensions: Microsoft Joliet Level 3 [ 2369.972640] ISO 9660 Extensions: RRIP_1991A [ 2372.662520] UDF-fs: No VRS found [ 2372.687980] ISO 9660 Extensions: Microsoft Joliet Level 3 [ 2372.706185] ISO 9660 Extensions: RRIP_1991A [ 2377.682037] UDF-fs: No VRS found [ 2377.710706] ISO 9660 Extensions: Microsoft Joliet Level 3 [ 2377.742998] ISO 9660 Extensions: RRIP_1991A [ 2379.752344] UDF-fs: No VRS found [ 2379.777929] ISO 9660 Extensions: Microsoft Joliet Level 3 [ 2379.804534] ISO 9660 Extensions: RRIP_1991A [ 2381.284637] UDF-fs: No VRS found [ 2381.310625] ISO 9660 Extensions: Microsoft Joliet Level 3 [ 2381.328063] ISO 9660 Extensions: RRIP_1991A [ 2382.745749] UDF-fs: No VRS found [ 2382.772198] ISO 9660 Extensions: Microsoft Joliet Level 3 [ 2382.797694] ISO 9660 Extensions: RRIP_1991A [ 2390.336583] UDF-fs: No VRS found [ 2390.362146] ISO 9660 Extensions: Microsoft Joliet Level 3 [ 2390.380146] ISO 9660 Extensions: RRIP_1991A [ 3719.088371] xc5000: waiting for firmware upload (dvb-fe-xc5000-1.1.fw)... [ 3719.088379] i2c-adapter i2c-0: firmware: requesting dvb-fe-xc5000-1.1.fw [ 3719.094043] xc5000: Upload failed. (file not found?) [ 3719.094051] xc5000: Unable to initialise tuner [ 3719.094861] DVB: adapter 0 frontend 0 frequency 0 out of range (54000000..858000000) [ 3733.625538] xc5000: waiting for firmware upload (dvb-fe-xc5000-1.1.fw)... [ 3733.625548] i2c-adapter i2c-0: firmware: requesting dvb-fe-xc5000-1.1.fw [ 3733.630183] xc5000: Upload failed. (file not found?) [ 3733.630191] xc5000: Unable to initialise tuner [ 3733.630951] DVB: adapter 0 frontend 0 frequency 0 out of range (54000000..858000000) [ 3804.615349] xc5000: waiting for firmware upload (dvb-fe-xc5000-1.1.fw)... [ 3804.615356] i2c-adapter i2c-0: firmware: requesting dvb-fe-xc5000-1.1.fw [ 3804.625947] xc5000: Upload failed. (file not found?) [ 3804.625952] xc5000: Unable to initialise tuner [ 3884.652556] xc5000: waiting for firmware upload (dvb-fe-xc5000-1.1.fw)... [ 3884.652567] i2c-adapter i2c-0: firmware: requesting dvb-fe-xc5000-1.1.fw [ 3884.657726] xc5000: Upload failed. (file not found?) [ 3884.657734] xc5000: Unable to initialise tuner [ 4007.131994] xc5000: waiting for firmware upload (dvb-fe-xc5000-1.1.fw)... [ 4007.132027] i2c-adapter i2c-0: firmware: requesting dvb-fe-xc5000-1.1.fw [ 4007.137101] xc5000: Upload failed. (file not found?) [ 4007.137109] xc5000: Unable to initialise tuner anth...@anthony-desktop:~/v4l-dvb$ I have done eveything that I am able to get this firmware to load for months now with not luck. Even steven toth's instructions were wrong. Please help!!! -- After update to jaunty 9.04, Pinnacle PCTV HD 800i no longer works https://bugs.launchpad.net/bugs/404690 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list [email protected] https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
