ref: HVR 900 Hello, I tested the "extracted firmware" and the one proposed by linux-firmware-nonfree (1.2.1)
/dev/dvb is still not created and kaffeine won't detect any device I have an other PVR150 tv card (could this conflict ? ) lsmod | grep em em28xx_dvb 11172 0 em28xx_alsa 9508 1 em28xx 95184 2 em28xx_dvb,em28xx_alsa dvb_core 104528 1 em28xx_dvb snd_pcm 93160 5 em28xx_alsa,snd_hda_intel,snd_hda_codec,snd_usb_audio,snd_pcm_oss ir_common 52740 1 em28xx videobuf_vmalloc 7844 1 em28xx v4l2_common 21024 7 em28xx,tvp5150,wm8775,tuner,cx25840,ivtv,cx2341x videodev 43360 8 em28xx,tvp5150,wm8775,tuner,cx25840,pwc,ivtv,v4l2_common videobuf_core 21188 2 em28xx,videobuf_vmalloc tveeprom 14884 2 em28xx,ivtv snd 77096 22 em28xx_alsa,snd_hda_codec_idt,snd_hda_intel,snd_hda_codec,snd_usb_audio,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_seq_oss,snd_rawmidi,snd_ [ 1172.059545] em28xx #0: disconnecting em28xx #0 video [ 1172.140116] em28xx #0: V4L2 device /dev/vbi0 deregistered [ 1172.140174] em28xx #0: V4L2 device /dev/video2 deregistered [ 1172.140297] xc2028 1-0061: destroying instance [ 1194.143439] Em28xx: Removed (Em28xx Audio Extension) extension [ 1194.144242] Em28xx: Removed (Em28xx dvb Extension) extension [ 1194.144764] usbcore: deregistering interface driver em28xx [ 1207.480023] usb 1-3: new high speed USB device using ehci_hcd and address 5 [ 1207.635437] usb 1-3: configuration #1 chosen from 1 choice [ 1207.650321] em28xx: New device WinTV HVR-900 @ 480 Mbps (2040:6502, interface 0, class 0) [ 1207.650463] em28xx #0: chip ID is em2882/em2883 [ 1207.854968] em28xx #0: i2c eeprom 00: 1a eb 67 95 40 20 02 65 d0 12 5c 03 82 1e 6a 18 [ 1207.854982] em28xx #0: i2c eeprom 10: 00 00 24 57 66 07 01 00 00 00 00 00 00 00 00 00 [ 1207.854994] em28xx #0: i2c eeprom 20: 46 00 01 00 f0 10 02 00 b8 00 00 00 5b e0 00 00 [ 1207.855006] em28xx #0: i2c eeprom 30: 00 00 20 40 20 6e 02 20 10 01 01 01 00 00 00 00 [ 1207.855018] em28xx #0: i2c eeprom 40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 1207.855030] em28xx #0: i2c eeprom 50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 1207.855042] em28xx #0: i2c eeprom 60: 00 00 00 00 00 00 00 00 00 00 18 03 34 00 30 00 [ 1207.855054] em28xx #0: i2c eeprom 70: 33 00 30 00 36 00 30 00 34 00 34 00 38 00 35 00 [ 1207.855066] em28xx #0: i2c eeprom 80: 00 00 1e 03 57 00 69 00 6e 00 54 00 56 00 20 00 [ 1207.855078] em28xx #0: i2c eeprom 90: 48 00 56 00 52 00 2d 00 39 00 30 00 30 00 00 00 [ 1207.855089] em28xx #0: i2c eeprom a0: 84 12 00 00 05 50 1a 7f d4 78 23 fa fd d0 38 89 [ 1207.855101] em28xx #0: i2c eeprom b0: ff 00 00 00 04 84 0a 00 01 01 20 77 00 40 c5 24 [ 1207.855113] em28xx #0: i2c eeprom c0: 3e f0 74 02 01 00 01 79 13 00 00 00 00 00 00 00 [ 1207.855125] em28xx #0: i2c eeprom d0: 84 12 00 00 05 50 1a 7f d4 78 23 fa fd d0 38 89 [ 1207.855137] em28xx #0: i2c eeprom e0: ff 00 00 00 04 84 0a 00 01 01 20 77 00 40 c5 24 [ 1207.855149] em28xx #0: i2c eeprom f0: 3e f0 74 02 01 00 01 79 13 00 00 00 00 00 00 00 [ 1207.855162] em28xx #0: EEPROM ID= 0x9567eb1a, EEPROM hash = 0x935f37dd [ 1207.855165] em28xx #0: EEPROM info: [ 1207.855167] em28xx #0: AC97 audio (5 sample rates) [ 1207.855169] em28xx #0: 500mA max power [ 1207.855172] em28xx #0: Table at 0x24, strings=0x1e82, 0x186a, 0x0000 [ 1207.855718] em28xx #0: Identified as Hauppauge WinTV HVR 900 (R2) (card=18) [ 1207.857119] tveeprom 1-0050: Hauppauge model 65018, rev B3C0, serial# 4072645 [ 1207.857124] tveeprom 1-0050: tuner model is Xceive XC3028 (idx 120, type 71) [ 1207.857128] tveeprom 1-0050: TV standards PAL(B/G) PAL(I) PAL(D/D1/K) ATSC/DVB Digital (eeprom 0xd4) [ 1207.857132] tveeprom 1-0050: audio processor is None (idx 0) [ 1207.857134] tveeprom 1-0050: has radio [ 1207.858884] tvp5150 1-005c: chip found @ 0xb8 (em28xx #0) [ 1207.866008] tuner 1-0061: chip found @ 0xc2 (em28xx #0) [ 1207.866109] xc2028 1-0061: creating new instance [ 1207.866113] xc2028 1-0061: type set to XCeive xc2028/xc3028 tuner [ 1207.866120] usb 1-3: firmware: requesting xc3028-v27.fw [ 1207.870966] xc2028 1-0061: Loading 80 firmware images from xc3028-v27.fw, type: xc2028 firmware, ver 2.7 [ 1207.930297] xc2028 1-0061: Loading firmware for type=BASE MTS (5), id 0000000000000000. [ 1208.829395] xc2028 1-0061: Loading firmware for type=MTS (4), id 000000000000b700. [ 1208.843767] xc2028 1-0061: Loading SCODE for type=MTS LCD NOGD MONO IF SCODE HAS_IF_4500 (6002b004), id 000000000000b700. [ 1209.050104] input: em28xx IR (em28xx #0) as /devices/pci0000:00/0000:00:1a.7/usb1/1-3/input/input17 [ 1209.050291] em28xx #0: Config register raw data: 0xd0 [ 1209.056402] em28xx #0: AC97 vendor ID = 0xffffffff [ 1209.060792] em28xx #0: AC97 features = 0x6a90 [ 1209.060796] em28xx #0: Empia 202 AC97 audio processor detected [ 1209.252920] tvp5150 1-005c: tvp5150am1 detected. [ 1209.370794] em28xx #0: v4l2 driver version 0.1.2 [ 1209.476890] em28xx #0: V4L2 device registered as /dev/video2 and /dev/vbi0 [ 1209.490051] usbcore: registered new interface driver em28xx [ 1209.490055] em28xx driver loaded [ 1209.496053] em28xx-audio.c: probing for em28x1 non standard usbaudio [ 1209.496057] em28xx-audio.c: Copyright (C) 2006 Markus Rechberger [ 1209.496467] Em28xx: Initialized (Em28xx Audio Extension) extension [ 1209.650431] tvp5150 1-005c: tvp5150am1 detected. [ 1300.194333] Em28xx: Initialized (Em28xx dvb Extension) extension -- Missing firmware for em28xx DVB-T digital tuner https://bugs.launchpad.net/bugs/278656 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs