It's 10 times slower, easily, when scanning the camera for images. I plug in the camera, digikam pops up, opens the camera import dialog, and then just sits there for 20 seconds before even rendering thumbnails. Each thumbnail from that point on takes maybe 1s to render. Previously, this was extremely fast.
lsusb: Bus 001 Device 007: ID 04a9:30f0 Canon, Inc. PowerShot S2 IS (PTP mode) Bus 001 Device 006: ID 046d:c408 Logitech, Inc. Marble Mouse (4-button) Bus 001 Device 002: ID 058f:6254 Alcor Micro Corp. USB Hub Bus 001 Device 004: ID 05e3:0716 Genesys Logic, Inc. Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 003: ID 0a12:1004 Cambridge Silicon Radio, Ltd Bus 002 Device 002: ID 04f2:0402 Chicony Electronics Co., Ltd Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub df: Filesystem 1K-blocks Used Available Use% Mounted on /dev/sda1 11535344 8298516 2650860 76% / udev 1806732 352 1806380 1% /dev none 1806732 4860 1801872 1% /dev/shm none 1806732 212 1806520 1% /var/run none 1806732 0 1806732 0% /var/lock none 1806732 0 1806732 0% /lib/init/rw none 11535344 8298516 2650860 76% /var/lib/ureadahead/debugfs /dev/sdd1 484535504 443298804 16817500 97% /m3 /dev/sdc1 969063944 969063408 0 100% /backup /dev/sdb1 14421344 290332 13398452 3% /tmp /dev/sdb2 19380708 15842904 2561052 87% /docs /dev/sda2 19228308 12400220 5851336 68% /home /dev/sdb4 446745948 403400116 20831140 96% /m2 /dev/sda3 930669180 416021412 467372492 48% /m1 /dev/sr0 4147076 4147076 0 100% /media/cdrom0 gphoto2: Model Port ---------------------------------------------------------- Canon PowerShot S2 IS (PTP mode) usb: Canon PowerShot S2 IS (PTP mode) usb:001,007 I had to install gphoto2; it wasn't present before. I can't do the test of running digikam from the command line, as it fails to recognize the camera. It only works when I plug the camera in. digikam(3646)/digikam (core) Digikam::GPCamera::doConnect: Failed to initialize camera! digikam(3646)/digikam (core) Digikam::GPCamera::printGphotoErrorDescription: Libgphoto2 error: Could not lock the device ( -60 ) -- Digikam slow to scan camera (regression) https://bugs.launchpad.net/bugs/503455 You received this bug notification because you are a member of Kubuntu Bugs, which is subscribed to digikam in ubuntu. -- kubuntu-bugs mailing list kubuntu-b...@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/kubuntu-bugs