As of now, I have tried these combinations of kernel boot parameters:
"acpi=off": bug occurs after 40 hours of operation
"acpi=off noapic": bug occurs within the first 10 minutes of operation
"pci=nomsi": bug occurs within the first 10 minutes of operation
Strange enough, this only happens on the second HDD attached to the
controller, the first runs flawlessly.
My mainboard is a Supermicro H8DI3+/i+/L+(-F), with a SB700/800 SATA controller:
00:11.0 SATA controller: ATI Technologies Inc SB700/SB800 SATA Controller [AHCI
mode] (prog-if 01 [AHCI 1.0])
Subsystem: ATI Technologies Inc SB700/SB800 SATA Controller [AHCI mode]
Flags: bus master, 66MHz, medium devsel, latency 64, IRQ 10
I/O ports at c000 [size=8]
I/O ports at b000 [size=4]
I/O ports at a000 [size=8]
I/O ports at 9000 [size=4]
I/O ports at 8000 [size=16]
Memory at fdcff800 (32-bit, non-prefetchable) [size=1K]
Capabilities: [60] Power Management version 2
Capabilities: [70] SATA HBA <?>
Kernel driver in use: ahci
So this seems to be a kernel issue. Is this already being pushed upstream?
--
Softreset failed (device not ready)
https://bugs.launchpad.net/bugs/285392
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
--
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
