The system is still going and has the sames disks in it it had then, I believe. I'll attach fdisk, /proc/mdstat and pvdisplay. I hope that helps.
On Mon, Jan 25, 2010 at 07:47:40AM -0000, Mario Limonciello wrote: > Hi DaveQB: > > When installing grub to the MBR, the bootable flag is irrelevant. That > only matters if you are using a DOS MBR. > > It might be a little late now since you were able to successfully > install by choosing where to install the booloader on a subsequent > installer, but would you mind elaborating on the exact configuration of > your drives from the failed install? > > Eg: > IDE port 0: drive I'm not doing anything with > Sata port 0: nothing connected > Sata port 1: drive I installed to > > What order did you have them configured to boot from the BIOS as well? > > Thanks, > > ** Also affects: ubiquity (Ubuntu) > Importance: Undecided > Status: New > > ** Changed in: ubiquity (Ubuntu) > Status: New => Incomplete > > ** Changed in: mythbuntu > Status: New => Incomplete > > -- > 9.10 system left unbootbale with enire disk install method. > https://bugs.launchpad.net/bugs/485083 > You received this bug notification because you are a direct subscriber > of the bug. -- -------------- Regards David ** Attachment added: "fdisk_-l" http://launchpadlibrarian.net/38355480/fdisk_-l ** Attachment added: "pvdisplay" http://launchpadlibrarian.net/38355481/pvdisplay ** Attachment added: "mdstat" http://launchpadlibrarian.net/38355482/mdstat -- 9.10 system left unbootbale with enire disk install method. https://bugs.launchpad.net/bugs/485083 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs