** Description changed:
I don't know why but linux mint freezes after a while. I am using
windows too but there is not a problem like this. I mean it can't be an
hardware problem. And here is my dmesg:
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 2.6.24-22-generic (bui...@vernadsky) (gcc
version 4.2.3 (Ubuntu 4.2.3-2ubuntu7)) #1 SMP Mon Nov 24 18:32:42 UTC 2008
(Ubuntu 2.6.24-22.45-generic)
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009ac00 (usable)
[ 0.000000] BIOS-e820: 000000000009ac00 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000003f7b0000 (usable)
[ 0.000000] BIOS-e820: 000000003f7b0000 - 000000003f7be000 (ACPI data)
[ 0.000000] BIOS-e820: 000000003f7be000 - 000000003f7f0000 (ACPI NVS)
[ 0.000000] BIOS-e820: 000000003f7f0000 - 000000003f800000 (reserved)
[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved)
[ 0.000000] 119MB HIGHMEM available.
[ 0.000000] 896MB LOWMEM available.
[ 0.000000] found SMP MP-table at 000ff780
[ 0.000000] Entering add_active_range(0, 0, 260016) 0 entries of 256 used
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0 -> 4096
[ 0.000000] Normal 4096 -> 229376
[ 0.000000] HighMem 229376 -> 260016
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[1] active PFN ranges
[ 0.000000] 0: 0 -> 260016
[ 0.000000] On node 0 totalpages: 260016
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 4064 pages, LIFO batch:0
[ 0.000000] Normal zone: 1760 pages used for memmap
[ 0.000000] Normal zone: 223520 pages, LIFO batch:31
[ 0.000000] HighMem zone: 239 pages used for memmap
[ 0.000000] HighMem zone: 30401 pages, LIFO batch:7
[ 0.000000] Movable zone: 0 pages used for memmap
[ 0.000000] DMI present.
[ 0.000000] ACPI: RSDP signature @ 0xC00F8680 checksum 0
[ 0.000000] ACPI: RSDP 000F8680, 0014 (r0 ACPIAM)
[ 0.000000] ACPI: RSDT 3F7B0000, 0044 (r1 MSI_NB MEGABOOK 20071113 MSFT
97)
[ 0.000000] ACPI: FACP 3F7B0200, 0084 (r2 111307 FACP1536 20071113 MSFT
97)
[ 0.000000] ACPI: DSDT 3F7B05B0, 5698 (r1 A163C A163C000 0 INTL
20051117)
[ 0.000000] ACPI: FACS 3F7BE000, 0040
[ 0.000000] ACPI: APIC 3F7B0390, 005C (r1 111307 APIC1536 20071113 MSFT
97)
[ 0.000000] ACPI: MCFG 3F7B03F0, 003C (r1 111307 OEMMCFG 20071113 MSFT
97)
[ 0.000000] ACPI: SLIC 3F7B0430, 0176 (r1 MSI_NB MEGABOOK 20071113 MSFT
97)
[ 0.000000] ACPI: OEMB 3F7BE040, 0071 (r1 111307 OEMB1536 20071113 MSFT
97)
[ 0.000000] ACPI: HPET 3F7B5C50, 0038 (r1 111307 OEMHPET 20071113 MSFT
97)
[ 0.000000] ACPI: GSCI 3F7BE0C0, 2024 (r1 111307 GMCHSCI 20071113 MSFT
97)
[ 0.000000] ACPI: SSDT 3F7C0970, 04E6 (r1 PmRef CpuPm 3000 INTL
20051117)
[ 0.000000] ACPI: PM-Timer IO Port: 0x808
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] Processor #0 6:15 APIC version 20
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[ 0.000000] Processor #1 6:15 APIC version 20
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.000000] ACPI: HPET id: 0xffffffff base: 0xfed00000
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] Allocating PCI resources starting at 40000000 (gap:
3f800000:bf600000)
[ 0.000000] swsusp: Registered nosave memory region: 000000000009a000 -
000000000009b000
[ 0.000000] swsusp: Registered nosave memory region: 000000000009b000 -
00000000000a0000
[ 0.000000] swsusp: Registered nosave memory region: 00000000000a0000 -
00000000000e0000
[ 0.000000] swsusp: Registered nosave memory region: 00000000000e0000 -
0000000000100000
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total
pages: 257985
[ 0.000000] Kernel command line: root=/dev/sda4 ro quiet splash \
[ 0.000000] mapped APIC to ffffb000 (fee00000)
[ 0.000000] mapped IOAPIC to ffffa000 (fec00000)
[ 0.000000] Enabling fast FPU save and restore... done.
[ 0.000000] Enabling unmasked SIMD FPU exception support... done.
[ 0.000000] Initializing CPU#0
[ 0.000000] PID hash table entries: 4096 (order: 12, 16384 bytes)
[ 0.000000] Detected 1596.088 MHz processor.
[ 15.304533] Console: colour VGA+ 80x25
[ 15.304537] console [tty0] enabled
[ 15.304888] Dentry cache hash table entries: 131072 (order: 7, 524288
bytes)
[ 15.305204] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 15.328756] Memory: 1018016k/1040064k available (2177k kernel code, 21276k
reserved, 1005k data, 368k init, 122560k highmem)
[ 15.328764] virtual kernel memory layout:
[ 15.328765] fixmap : 0xfff4b000 - 0xfffff000 ( 720 kB)
[ 15.328766] pkmap : 0xff800000 - 0xffc00000 (4096 kB)
[ 15.328767] vmalloc : 0xf8800000 - 0xff7fe000 ( 111 MB)
[ 15.328768] lowmem : 0xc0000000 - 0xf8000000 ( 896 MB)
[ 15.328769] .init : 0xc0421000 - 0xc047d000 ( 368 kB)
[ 15.328770] .data : 0xc0320704 - 0xc041bdc4 (1005 kB)
[ 15.328771] .text : 0xc0100000 - 0xc0320704 (2177 kB)
[ 15.328774] Checking if this processor honours the WP bit even in
supervisor mode... Ok.
[ 15.328821] SLUB: Genslabs=11, HWalign=64, Order=0-1, MinObjects=4,
CPUs=2, Nodes=1
[ 15.328980] hpet clockevent registered
[ 15.408911] Calibrating delay using timer specific routine.. 3195.84
BogoMIPS (lpj=6391693)
[ 15.408935] Security Framework initialized
[ 15.408943] SELinux: Disabled at boot.
[ 15.408957] AppArmor: AppArmor initialized
[ 15.408961] Failure registering capabilities with primary security module.
[ 15.408969] Mount-cache hash table entries: 512
[ 15.409110] Initializing cgroup subsys ns
[ 15.409115] Initializing cgroup subsys cpuacct
[ 15.409127] CPU: After generic identify, caps: bfebfbff 20100000 00000000
00000000 0000e39d 00000000 00000001 00000000
[ 15.409135] monitor/mwait feature present.
[ 15.409137] using mwait in idle threads.
[ 15.409141] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 15.409144] CPU: L2 cache: 1024K
[ 15.409146] CPU: Physical Processor ID: 0
[ 15.409148] CPU: Processor Core ID: 0
[ 15.409150] CPU: After all inits, caps: bfebfbff 20100000 00000000
00043940 0000e39d 00000000 00000001 00000000
[ 15.409160] Compat vDSO mapped to ffffe000.
[ 15.409175] Checking 'hlt' instruction... OK.
[ 15.425316] SMP alternatives: switching to UP code
[ 15.427068] Early unpacking initramfs... done
[ 15.813672] ACPI: Core revision 20070126
[ 15.813719] ACPI: Looking for DSDT in initramfs... error, file /DSDT.aml
not found.
[ 15.817260] CPU0: Intel(R) Pentium(R) Dual CPU T2330 @ 1.60GHz stepping
0d
[ 15.817278] SMP alternatives: switching to SMP code
[ 15.818049] Booting processor 1/1 eip 3000
[ 15.828182] Initializing CPU#1
[ 15.908431] Calibrating delay using timer specific routine.. 3191.97
BogoMIPS (lpj=6383949)
[ 15.908439] CPU: After generic identify, caps: bfebfbff 20100000 00000000
00000000 0000e39d 00000000 00000001 00000000
[ 15.908444] monitor/mwait feature present.
[ 15.908447] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 15.908449] CPU: L2 cache: 1024K
[ 15.908452] CPU: Physical Processor ID: 0
[ 15.908453] CPU: Processor Core ID: 1
[ 15.908454] CPU: After all inits, caps: bfebfbff 20100000 00000000
00043940 0000e39d 00000000 00000001 00000000
[ 15.908986] CPU1: Intel(R) Pentium(R) Dual CPU T2330 @ 1.60GHz stepping
0d
[ 15.909010] Total of 2 processors activated (6387.82 BogoMIPS).
[ 15.909206] ENABLING IO-APIC IRQs
[ 15.909403] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 16.056412] checking TSC synchronization [CPU#0 -> CPU#1]: passed.
[ 16.076409] Brought up 2 CPUs
[ 16.076434] CPU0 attaching sched-domain:
[ 16.076437] domain 0: span 03
[ 16.076439] groups: 01 02
[ 16.076443] CPU1 attaching sched-domain:
[ 16.076444] domain 0: span 03
[ 16.076446] groups: 02 01
[ 16.076673] net_namespace: 64 bytes
[ 16.076686] Booting paravirtualized kernel on bare hardware
[ 16.077167] Time: 9:13:43 Date: 12/13/08
[ 16.077199] NET: Registered protocol family 16
[ 16.077388] EISA bus registered
[ 16.077393] ACPI: bus type pci registered
[ 16.077678] PCI: PCI BIOS revision 3.00 entry at 0xf0031, last bus=4
[ 16.077680] PCI: Using configuration type 1
[ 16.077704] Setting up standard PCI resources
[ 16.088749] ACPI: EC: Look up EC in DSDT
[ 16.092255] ACPI: Interpreter enabled
[ 16.092259] ACPI: (supports S0 S1 S3 S4 S5)
[ 16.092275] ACPI: Using IOAPIC for interrupt routing
[ 16.092563] Error attaching device data
[ 16.092605] Error attaching device data
[ 16.094969] ACPI: EC: non-query interrupt received, switching to interrupt
mode
[ 16.099603] ACPI: EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62
[ 16.099606] ACPI: EC: driver started in interrupt mode
[ 16.099722] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 16.100805] PCI quirk: region 0800-087f claimed by ICH6 ACPI/GPIO/TCO
[ 16.100810] PCI quirk: region 0500-053f claimed by ICH6 GPIO
[ 16.101994] PCI: Transparent bridge - 0000:00:1e.0
[ 16.102090] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 16.102252] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
[ 16.102377] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P4._PRT]
[ 16.102475] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P6._PRT]
[ 16.119766] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14
15)
[ 16.119905] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 *5 6 7 10 11 12 14
15)
[ 16.120042] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 *10 11 12 14
15)
[ 16.120178] ACPI: PCI Interrupt Link [LNKD] (IRQs *3 4 5 6 7 10 11 12 14
15)
[ 16.120313] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 *7 10 11 12 14
15)
[ 16.120453] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 *4 5 6 7 10 11 12 14
15)
[ 16.120589] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 *6 7 10 11 12 14
15)
[ 16.120725] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 11 12 14
*15)
[ 16.120878] Linux Plug and Play Support v0.97 (c) Adam Belay
[ 16.120910] pnp: PnP ACPI init
[ 16.120919] ACPI: bus type pnp registered
[ 16.123569] pnp: PnP ACPI: found 13 devices
[ 16.123572] ACPI: ACPI bus type pnp unregistered
[ 16.123576] PnPBIOS: Disabled by ACPI PNP
[ 16.123799] PCI: Using ACPI for IRQ routing
[ 16.123803] PCI: If a device doesn't work, try "pci=routeirq". If it
helps, post a report
[ 16.176312] NET: Registered protocol family 8
[ 16.176314] NET: Registered protocol family 20
[ 16.176349] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 16.176354] hpet0: 3 64-bit timers, 14318180 Hz
[ 16.177396] AppArmor: AppArmor Filesystem Enabled
[ 16.180179] Time: tsc clocksource has been installed.
[ 16.180196] Switched to high resolution mode on CPU 0
[ 16.180304] Switched to high resolution mode on CPU 1
[ 16.193163] system 00:01: iomem range 0xfed14000-0xfed19fff has been
reserved
[ 16.193174] system 00:08: ioport range 0x400-0x41f has been reserved
[ 16.193177] system 00:08: ioport range 0x4d0-0x4d1 has been reserved
[ 16.193180] system 00:08: ioport range 0x800-0x87f has been reserved
[ 16.193182] system 00:08: ioport range 0x500-0x53f has been reserved
[ 16.193185] system 00:08: iomem range 0xfed1c000-0xfed1ffff has been
reserved
[ 16.193188] system 00:08: iomem range 0xfed20000-0xfed3ffff has been
reserved
[ 16.193191] system 00:08: iomem range 0xfed40000-0xfed8ffff has been
reserved
[ 16.193198] system 00:0a: iomem range 0xfec00000-0xfec00fff has been
reserved
[ 16.193201] system 00:0a: iomem range 0xfee00000-0xfee00fff could not be
reserved
[ 16.193207] system 00:0b: iomem range 0xe0000000-0xefffffff has been
reserved
[ 16.193214] system 00:0c: iomem range 0x0-0x9ffff could not be reserved
[ 16.193217] system 00:0c: iomem range 0xc0000-0xcffff could not be reserved
[ 16.193219] system 00:0c: iomem range 0xe0000-0xfffff could not be reserved
[ 16.193222] system 00:0c: iomem range 0x100000-0x3f7fffff could not be
reserved
[ 16.193225] system 00:0c: iomem range 0xfed90000-0xffffffff could not be
reserved
[ 16.223645] PCI: Bridge: 0000:00:1c.0
[ 16.223649] IO window: e000-efff
[ 16.223656] MEM window: feb00000-febfffff
[ 16.223661] PREFETCH window: disabled.
[ 16.223668] PCI: Bridge: 0000:00:1c.2
[ 16.223669] IO window: disabled.
[ 16.223675] MEM window: fea00000-feafffff
[ 16.223680] PREFETCH window: disabled.
[ 16.223708] PCI: Bus 2, cardbus bridge: 0000:01:04.0
[ 16.223711] IO window: 0000d000-0000d0ff
[ 16.223716] IO window: 0000d400-0000d4ff
[ 16.223721] PREFETCH window: 40000000-43ffffff
[ 16.223727] MEM window: 44000000-47ffffff
[ 16.223732] PCI: Bridge: 0000:00:1e.0
[ 16.223736] IO window: d000-dfff
[ 16.223742] MEM window: fe100000-fe9fffff
[ 16.223747] PREFETCH window: fb000000-fcffffff
[ 16.223785] ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 16 (level, low) ->
IRQ 16
[ 16.223792] PCI: Setting latency timer of device 0000:00:1c.0 to 64
[ 16.223820] ACPI: PCI Interrupt 0000:00:1c.2[C] -> GSI 18 (level, low) ->
IRQ 17
[ 16.223827] PCI: Setting latency timer of device 0000:00:1c.2 to 64
[ 16.223843] PCI: Setting latency timer of device 0000:00:1e.0 to 64
[ 16.223863] ACPI: PCI Interrupt 0000:01:04.0[A] -> GSI 22 (level, low) ->
IRQ 18
[ 16.223880] NET: Registered protocol family 2
[ 16.261130] IP route cache hash table entries: 32768 (order: 5, 131072
bytes)
[ 16.261391] TCP established hash table entries: 131072 (order: 8, 1048576
bytes)
[ 16.261964] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[ 16.262365] TCP: Hash tables configured (established 131072 bind 65536)
[ 16.262368] TCP reno registered
[ 16.273243] checking if image is initramfs... it is
[ 17.034728] Freeing initrd memory: 8171k freed
[ 17.035567] audit: initializing netlink socket (disabled)
[ 17.035583] audit(1229159623.584:1): initialized
[ 17.035774] highmem bounce pool size: 64 pages
[ 17.037768] VFS: Disk quotas dquot_6.5.1
[ 17.037842] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 17.037985] io scheduler noop registered
[ 17.037987] io scheduler anticipatory registered
[ 17.037989] io scheduler deadline registered
[ 17.038000] io scheduler cfq registered (default)
[ 17.038014] Boot video device is 0000:00:02.0
[ 17.038267] PCI: Setting latency timer of device 0000:00:1c.0 to 64
[ 17.038333] assign_interrupt_mode Found MSI capability
[ 17.038392] Allocate Port Service[0000:00:1c.0:pcie00]
[ 17.038427] Allocate Port Service[0000:00:1c.0:pcie02]
[ 17.038538] PCI: Setting latency timer of device 0000:00:1c.2 to 64
[ 17.038605] assign_interrupt_mode Found MSI capability
[ 17.038657] Allocate Port Service[0000:00:1c.2:pcie00]
[ 17.038690] Allocate Port Service[0000:00:1c.2:pcie02]
[ 17.038951] isapnp: Scanning for PnP cards...
[ 17.393169] isapnp: No Plug & Play device found
[ 17.418807] Real Time Clock Driver v1.12ac
[ 17.419020] hpet_resources: 0xfed00000 is busy
[ 17.419073] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ
sharing enabled
[ 17.420910] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024
blocksize
[ 17.420978] input: Macintosh mouse button emulation as
/devices/virtual/input/input0
[ 17.421087] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64
irq 1,12
[ 17.421436] i8042.c: Detected active multiplexing controller, rev 1.1.
[ 17.421516] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 17.421520] serio: i8042 AUX0 port at 0x60,0x64 irq 12
[ 17.421523] serio: i8042 AUX1 port at 0x60,0x64 irq 12
[ 17.421525] serio: i8042 AUX2 port at 0x60,0x64 irq 12
[ 17.421528] serio: i8042 AUX3 port at 0x60,0x64 irq 12
[ 17.439061] mice: PS/2 mouse device common for all mice
[ 17.439182] EISA: Probing bus 0 at eisa.0
[ 17.439223] EISA: Detected 0 cards.
[ 17.439226] cpuidle: using governor ladder
[ 17.439228] cpuidle: using governor menu
[ 17.439318] NET: Registered protocol family 1
[ 17.439350] Using IPI No-Shortcut mode
[ 17.439379] registered taskstats version 1
[ 17.439507] Magic number: 4:135:222
[ 17.439530] hash matches device ttyu6
[ 17.439601] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 17.439603] EDD information not available.
[ 17.439810] Freeing unused kernel memory: 368k freed
[ 17.439837] Write protecting the kernel read-only data: 801k
[ 17.442562] input: AT Translated Set 2 keyboard as
/devices/platform/i8042/serio0/input/input1
[ 18.669510] fuse init (API version 7.9)
[ 18.692155] ACPI: SSDT 3F7C01C0, 0255 (r1 PmRef Cpu0Ist 3000 INTL
20051117)
[ 18.692383] ACPI: SSDT 3F7C04B0, 04B6 (r1 PmRef Cpu0Cst 3001 INTL
20051117)
[ 18.692746] Monitor-Mwait will be used to enter C-1 state
[ 18.692748] Monitor-Mwait will be used to enter C-2 state
[ 18.692751] Monitor-Mwait will be used to enter C-3 state
[ 18.692876] ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
[ 18.693109] ACPI: SSDT 3F7C00F0, 00C8 (r1 PmRef Cpu1Ist 3000 INTL
20051117)
[ 18.693317] ACPI: SSDT 3F7C0420, 0085 (r1 PmRef Cpu1Cst 3000 INTL
20051117)
[ 18.693908] ACPI: CPU1 (power states: C1[C1] C2[C2] C3[C3])
[ 18.696457] ACPI: Thermal Zone [THRM] (46 C)
[ 18.855240] usbcore: registered new interface driver usbfs
[ 18.855264] usbcore: registered new interface driver hub
[ 18.855298] usbcore: registered new device driver usb
[ 18.856872] USB Universal Host Controller Interface driver v3.0
[ 18.856927] ACPI: PCI Interrupt 0000:00:1a.0[A] -> GSI 16 (level, low) ->
IRQ 16
[ 18.856939] PCI: Setting latency timer of device 0000:00:1a.0 to 64
[ 18.856944] uhci_hcd 0000:00:1a.0: UHCI Host Controller
[ 18.857188] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus
number 1
[ 18.857226] uhci_hcd 0000:00:1a.0: irq 16, io base 0x0000b480
[ 18.857372] usb usb1: configuration #1 chosen from 1 choice
[ 18.857398] hub 1-0:1.0: USB hub found
[ 18.857403] hub 1-0:1.0: 2 ports detected
[ 18.957686] ACPI: PCI Interrupt 0000:00:1a.1[B] -> GSI 21 (level, low) ->
IRQ 19
[ 18.957700] PCI: Setting latency timer of device 0000:00:1a.1 to 64
[ 18.957705] uhci_hcd 0000:00:1a.1: UHCI Host Controller
[ 18.957736] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus
number 2
[ 18.957771] uhci_hcd 0000:00:1a.1: irq 19, io base 0x0000b800
[ 18.957893] usb usb2: configuration #1 chosen from 1 choice
[ 18.957919] hub 2-0:1.0: USB hub found
[ 18.957924] hub 2-0:1.0: 2 ports detected
[ 19.061583] ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) ->
IRQ 20
[ 19.061597] PCI: Setting latency timer of device 0000:00:1d.0 to 64
[ 19.061602] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 19.061628] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus
number 3
[ 19.061663] uhci_hcd 0000:00:1d.0: irq 20, io base 0x0000b880
[ 19.061781] usb usb3: configuration #1 chosen from 1 choice
[ 19.061805] hub 3-0:1.0: USB hub found
[ 19.061810] hub 3-0:1.0: 2 ports detected
[ 19.096847] SCSI subsystem initialized
[ 19.147427] libata version 3.00 loaded.
[ 19.165478] ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) ->
IRQ 21
[ 19.165491] PCI: Setting latency timer of device 0000:00:1d.1 to 64
[ 19.165496] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 19.165522] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus
number 4
[ 19.165557] uhci_hcd 0000:00:1d.1: irq 21, io base 0x0000bc00
[ 19.165685] usb usb4: configuration #1 chosen from 1 choice
[ 19.165711] hub 4-0:1.0: USB hub found
[ 19.165716] hub 4-0:1.0: 2 ports detected
[ 19.269407] ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) ->
IRQ 17
[ 19.269422] PCI: Setting latency timer of device 0000:00:1d.2 to 64
[ 19.269427] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 19.269462] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus
number 5
[ 19.269499] uhci_hcd 0000:00:1d.2: irq 17, io base 0x0000c000
[ 19.269628] usb usb5: configuration #1 chosen from 1 choice
[ 19.269653] hub 5-0:1.0: USB hub found
[ 19.269659] hub 5-0:1.0: 2 ports detected
[ 19.373487] ACPI: PCI Interrupt 0000:00:1a.7[C] -> GSI 18 (level, low) ->
IRQ 17
[ 19.373503] PCI: Setting latency timer of device 0000:00:1a.7 to 64
[ 19.373507] ehci_hcd 0000:00:1a.7: EHCI Host Controller
[ 19.373540] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus
number 6
[ 19.377469] ehci_hcd 0000:00:1a.7: debug port 1
[ 19.377477] PCI: cache line size of 32 is not supported by device
0000:00:1a.7
[ 19.377486] ehci_hcd 0000:00:1a.7: irq 17, io mem 0xfe0fec00
[ 19.393173] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00, driver 10
Dec 2004
[ 19.393319] usb usb6: configuration #1 chosen from 1 choice
[ 19.393347] hub 6-0:1.0: USB hub found
[ 19.393353] hub 6-0:1.0: 4 ports detected
[ 19.497174] ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) ->
IRQ 20
[ 19.497196] PCI: Setting latency timer of device 0000:00:1d.7 to 64
[ 19.497201] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 19.497233] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus
number 7
[ 19.501156] ehci_hcd 0000:00:1d.7: debug port 1
[ 19.501164] PCI: cache line size of 32 is not supported by device
0000:00:1d.7
[ 19.501170] ehci_hcd 0000:00:1d.7: irq 20, io mem 0xfe0ff800
[ 19.517051] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10
Dec 2004
[ 19.517180] usb usb7: configuration #1 chosen from 1 choice
[ 19.517208] hub 7-0:1.0: USB hub found
[ 19.517214] hub 7-0:1.0: 6 ports detected
[ 19.621081] r8169 Gigabit Ethernet driver 2.2LK loaded
[ 19.621116] ACPI: PCI Interrupt 0000:04:00.0[A] -> GSI 16 (level, low) ->
IRQ 16
[ 19.621139] PCI: Setting latency timer of device 0000:04:00.0 to 64
[ 19.621512] eth0: RTL8168b/8111b at 0xf8832000, 00:1d:92:4b:95:ab, XID
38000000 IRQ 221
[ 19.622780] ACPI: PCI Interrupt 0000:01:04.4[A] -> GSI 22 (level, low) ->
IRQ 18
[ 19.673493] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[18]
MMIO=[fe102000-fe1027ff] Max Packet=[2048] IR/IT contexts=[8/8]
[ 19.676770] ahci 0000:00:1f.2: version 3.0
[ 19.676809] ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 18 (level, low) ->
IRQ 17
[ 19.948638] Clocksource tsc unstable (delta = -7617866084 ns)
[ 19.952653] Time: hpet clocksource has been installed.
[ 19.973729] ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 3 ports 3 Gbps 0x7
impl SATA mode
- [ 19.973733] ahci 0000:00:1f.2: flags: 64bit ncq sntf ilck stag pm led clo
pmp pio slum part
+ [ 19.973733] ahci 0000:00:1f.2: flags: 64bit ncq sntf ilck stag pm led clo
pmp pio slum part
[ 19.973740] PCI: Setting latency timer of device 0000:00:1f.2 to 64
[ 19.974039] scsi0 : ahci
[ 19.974333] scsi1 : ahci
[ 19.974498] scsi2 : ahci
[ 19.974580] ata1: SATA max UDMA/133 abar m2...@0xfe0ff000 port 0xfe0ff100
irq 220
[ 19.974584] ata2: SATA max UDMA/133 abar m2...@0xfe0ff000 port 0xfe0ff180
irq 220
[ 19.974588] ata3: SATA max UDMA/133 abar m2...@0xfe0ff000 port 0xfe0ff200
irq 220
[ 19.982796] ieee1394: Host added: ID:BUS[0-00:1023] GUID[00dc1000034d3701]
[ 20.025870] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 20.310469] ata1.00: ATA-8: WDC WD1200BEVS-00UST0, 01.01A01, max UDMA/133
[ 20.310473] ata1.00: 234441648 sectors, multi 16: LBA48 NCQ (depth 31/32)
[ 20.311337] ata1.00: configured for UDMA/133
[ 20.319160] ata2: SATA link down (SStatus 0 SControl 300)
[ 20.326564] ata3: SATA link down (SStatus 0 SControl 300)
[ 20.326773] scsi 0:0:0:0: Direct-Access ATA WDC WD1200BEVS-0 01.0
PQ: 0 ANSI: 5
[ 20.327192] ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 19 (level, low) ->
IRQ 21
[ 20.327231] PCI: Setting latency timer of device 0000:00:1f.1 to 64
[ 20.327247] ACPI: PCI interrupt for device 0000:00:1f.1 disabled
[ 20.336414] ata_piix 0000:00:1f.1: version 2.12
[ 20.336439] ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 19 (level, low) ->
IRQ 21
[ 20.336487] PCI: Setting latency timer of device 0000:00:1f.1 to 64
[ 20.338527] scsi3 : ata_piix
[ 20.339268] scsi4 : ata_piix
[ 20.340494] ata4: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xffa0 irq 14
[ 20.340497] ata5: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xffa8 irq 15
[ 20.340722] Driver 'sd' needs updating - please use bus_type methods
[ 20.342333] sd 0:0:0:0: [sda] 234441648 512-byte hardware sectors (120034
MB)
[ 20.342347] sd 0:0:0:0: [sda] Write Protect is off
[ 20.342349] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 20.342367] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled,
doesn't support DPO or FUA
[ 20.342428] sd 0:0:0:0: [sda] 234441648 512-byte hardware sectors (120034
MB)
[ 20.342439] sd 0:0:0:0: [sda] Write Protect is off
[ 20.342441] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 20.342458] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled,
doesn't support DPO or FUA
[ 20.342461] sda: sda1 sda2 sda3 < sda5 > sda4
[ 20.420912] sd 0:0:0:0: [sda] Attached SCSI disk
[ 20.426009] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 20.660307] ata4.01: ATAPI: Optiarc DVD RW AD-7530B, NX02, max UDMA/33
[ 20.667320] ata4.01: configured for UDMA/33
[ 20.667422] ata5: port disabled. ignoring.
[ 20.668447] scsi 3:0:1:0: CD-ROM Optiarc DVD RW AD-7530B NX02
PQ: 0 ANSI: 5
[ 20.668535] scsi 3:0:1:0: Attached scsi generic sg1 type 5
[ 20.676212] Driver 'sr' needs updating - please use bus_type methods
[ 20.685533] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2
cdda tray
[ 20.685538] Uniform CD-ROM driver Revision: 3.20
[ 20.685594] sr 3:0:1:0: Attached scsi CD-ROM sr0
[ 20.750914] Attempting manual resume
[ 20.750917] swsusp: Resume From Partition 8:5
[ 20.750919] PM: Checking swsusp image.
[ 20.751119] PM: Resume from disk failed.
[ 20.785333] kjournald starting. Commit interval 5 seconds
[ 20.785358] EXT3-fs: mounted filesystem with ordered data mode.
[ 31.192676] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 31.253647] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 31.288149] iTCO_vendor_support: vendor-support=0
[ 31.333113] Linux agpgart interface v0.102
[ 31.352192] input: PC Speaker as /devices/platform/pcspkr/input/input2
[ 31.380553] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.02 (26-Jul-2007)
[ 31.380657] iTCO_wdt: Found a ICH8M TCO device (Version=2, TCOBASE=0x0860)
[ 31.380701] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 31.467849] agpgart: Detected an Intel 965GM Chipset.
[ 31.468453] agpgart: Detected 7676K stolen memory.
[ 31.483941] agpgart: AGP aperture is 256M @ 0xd0000000
[ 31.515563] input: Power Button (FF) as /devices/virtual/input/input3
[ 31.603286] ACPI: Power Button (FF) [PWRF]
[ 31.603366] input: Lid Switch as /devices/virtual/input/input4
[ 31.607101] Yenta: CardBus bridge found at 0000:01:04.0 [1462:3ff3]
[ 31.607131] Yenta O2: res at 0x94/0xD4: 00/ea
[ 31.607133] Yenta O2: enabling read prefetch/write burst
[ 31.635951] ACPI: Lid Switch [LID0]
[ 31.636026] input: Sleep Button (CM) as /devices/virtual/input/input5
[ 31.699218] ACPI: Sleep Button (CM) [SLPB]
[ 31.699301] input: Power Button (CM) as /devices/virtual/input/input6
[ 31.736108] Yenta: ISA IRQ mask 0x0cb8, PCI irq 18
[ 31.736114] Socket status: 30000006
[ 31.736118] pcmcia: parent PCI bridge I/O window: 0xd000 - 0xdfff
[ 31.736121] cs: IO port probe 0xd000-0xdfff: clean.
[ 31.736401] pcmcia: parent PCI bridge Memory window: 0xfe100000 -
0xfe9fffff
[ 31.736404] pcmcia: parent PCI bridge Memory window: 0xfb000000 -
0xfcffffff
[ 31.763137] ACPI: Power Button (CM) [PWRB]
[ 31.995230] input: Video Bus as
/devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input7
[ 32.000177] sdhci: Secure Digital Host Controller Interface driver
[ 32.000181] sdhci: Copyright(c) Pierre Ossman
[ 32.000236] sdhci: SDHCI controller found at 0000:01:04.2 [1217:7120] (rev
2)
[ 32.000269] ACPI: PCI Interrupt 0000:01:04.2[A] -> GSI 22 (level, low) ->
IRQ 18
[ 32.000294] sdhci:slot0: Unknown controller version (2). You may
experience problems.
[ 32.000347] mmc0: SDHCI at 0xfe103000 irq 18 DMA
[ 32.050859] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
[ 32.126834] ndiswrapper version 1.52 loaded (smp=yes, preempt=no)
[ 32.253066] ACPI: AC Adapter [ADP1] (off-line)
[ 32.342276] Synaptics Touchpad, model: 1, fw: 6.1, id: 0xa3a0b3, caps:
0xa04713/0x10008
[ 32.366616] ACPI: Battery Slot [BAT1] (battery present)
[ 32.372138] input: SynPS/2 Synaptics TouchPad as
/devices/platform/i8042/serio4/input/input8
[ 32.456749] ndiswrapper: driver net5211 (,11/15/2006,5.1.1.9) loaded
[ 32.457036] ACPI: PCI Interrupt 0000:03:00.0[A] -> GSI 18 (level, low) ->
IRQ 17
[ 32.457093] ndiswrapper (ZwClose:2226): closing handle 0xdf8a3728 not
implemented
[ 32.457241] PCI: Setting latency timer of device 0000:03:00.0 to 64
[ 32.869939] ndiswrapper: using IRQ 17
[ 32.937263] ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 20 (level, low) ->
IRQ 22
[ 32.937297] PCI: Setting latency timer of device 0000:00:1b.0 to 64
[ 33.071129] wlan0: ethernet device 00:15:af:5e:ba:53 using serialized NDIS
driver: net5211, version: 0x50001, NDIS version: 0x501, vendor: 'NDIS Network
Adapter', 168C:001C.5.conf
[ 33.075897] wlan0: encryption modes supported: WEP; TKIP with WPA, WPA2,
WPA2PSK; AES/CCMP with WPA, WPA2, WPA2PSK
[ 33.080410] usbcore: registered new interface driver ndiswrapper
[ 33.573365] cs: IO port probe 0x100-0x3af: clean.
[ 33.575537] cs: IO port probe 0x3e0-0x4ff: clean.
[ 33.576339] cs: IO port probe 0x820-0x8ff: clean.
[ 33.576785] cs: IO port probe 0xc00-0xcf7: clean.
[ 33.577708] cs: IO port probe 0xa00-0xaff: clean.
[ 33.709341] lp: driver loaded but no devices found
[ 33.769342] AR5210, AR5211, AR5212, AR5416, RF5111, RF5112, RF2413,
RF5413, RF2133, RF2425, RF2417)
[ 33.985142] Adding 1461872k swap on /dev/sda5. Priority:-1 extents:1
across:1461872k
[ 34.006619] EXT3 FS on sda4, internal journal
[ 34.946076] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 35.386946] No dock devices found.
[ 36.910515] ppdev: user-space parallel port driver
[ 37.164086] apm: BIOS not found.
[ 40.260920] r8169: eth0: link down
[ 40.362724] Bluetooth: Core ver 2.11
[ 40.362920] NET: Registered protocol family 31
[ 40.362927] Bluetooth: HCI device and connection manager initialized
[ 40.362934] Bluetooth: HCI socket layer initialized
[ 40.428997] Bluetooth: L2CAP ver 2.9
[ 40.429006] Bluetooth: L2CAP socket layer initialized
[ 40.482453] Bluetooth: RFCOMM socket layer initialized
[ 40.482472] Bluetooth: RFCOMM TTY layer initialized
[ 40.482474] Bluetooth: RFCOMM ver 1.8
[ 42.441767] atkbd.c: Unknown key pressed (translated set 2, code 0xf7 on
isa0060/serio0).
[ 42.441777] atkbd.c: Use 'setkeycodes e077 <keycode>' to make it known.
[ 42.442656] atkbd.c: Unknown key released (translated set 2, code 0xf7 on
isa0060/serio0).
[ 42.442663] atkbd.c: Use 'setkeycodes e077 <keycode>' to make it known.
[ 43.339577] atkbd.c: Unknown key pressed (translated set 2, code 0xf8 on
isa0060/serio0).
[ 43.339587] atkbd.c: Use 'setkeycodes e078 <keycode>' to make it known.
[ 43.340459] atkbd.c: Unknown key released (translated set 2, code 0xf8 on
isa0060/serio0).
[ 43.340466] atkbd.c: Use 'setkeycodes e078 <keycode>' to make it known.
[ 43.811817] [drm] Initialized drm 1.1.0 20060810
[ 43.815921] ACPI: PCI Interrupt 0000:00:02.0[A] -> GSI 16 (level, low) ->
IRQ 16
[ 43.815940] PCI: Setting latency timer of device 0000:00:02.0 to 64
[ 43.816065] [drm] Initialized i915 1.6.0 20060119 on minor 0
[ 43.972819] atkbd.c: Unknown key pressed (translated set 2, code 0xf7 on
isa0060/serio0).
[ 43.972829] atkbd.c: Use 'setkeycodes e077 <keycode>' to make it known.
[ 43.973702] atkbd.c: Unknown key released (translated set 2, code 0xf7 on
isa0060/serio0).
[ 43.973708] atkbd.c: Use 'setkeycodes e077 <keycode>' to make it known.
[ 44.458147] atkbd.c: Unknown key pressed (translated set 2, code 0xf8 on
isa0060/serio0).
[ 44.458152] atkbd.c: Use 'setkeycodes e078 <keycode>' to make it known.
[ 44.458626] atkbd.c: Unknown key released (translated set 2, code 0xf8 on
isa0060/serio0).
[ 44.458630] atkbd.c: Use 'setkeycodes e078 <keycode>' to make it known.
[ 62.719550] CPU0 attaching NULL sched-domain.
[ 62.719564] CPU1 attaching NULL sched-domain.
[ 62.731616] CPU0 attaching sched-domain:
[ 62.731624] domain 0: span 03
[ 62.731628] groups: 01 02
[ 62.731636] domain 1: span 03
[ 62.731641] groups: 03
[ 62.731647] CPU1 attaching sched-domain:
[ 62.731651] domain 0: span 03
[ 62.731655] groups: 02 01
[ 62.731662] domain 1: span 03
[ 62.731667] groups: 03
[ 84.869737] atkbd.c: Unknown key pressed (translated set 2, code 0xf7 on
isa0060/serio0).
[ 84.869748] atkbd.c: Use 'setkeycodes e077 <keycode>' to make it known.
[ 84.870581] atkbd.c: Unknown key released (translated set 2, code 0xf7 on
isa0060/serio0).
[ 84.870590] atkbd.c: Use 'setkeycodes e077 <keycode>' to make it known.
[ 84.886014] atkbd.c: Unknown key pressed (translated set 2, code 0xf7 on
isa0060/serio0).
[ 84.886025] atkbd.c: Use 'setkeycodes e077 <keycode>' to make it known.
[ 84.886782] atkbd.c: Unknown key released (translated set 2, code 0xf7 on
isa0060/serio0).
[ 84.886790] atkbd.c: Use 'setkeycodes e077 <keycode>' to make it known.
[ 84.900975] atkbd.c: Unknown key pressed (translated set 2, code 0xf7 on
isa0060/serio0).
[ 84.900986] atkbd.c: Use 'setkeycodes e077 <keycode>' to make it known.
[ 84.901818] atkbd.c: Unknown key released (translated set 2, code 0xf7 on
isa0060/serio0).
[ 84.901824] atkbd.c: Use 'setkeycodes e077 <keycode>' to make it known.
[ 84.917560] atkbd.c: Unknown key pressed (translated set 2, code 0xf7 on
isa0060/serio0).
[ 84.917570] atkbd.c: Use 'setkeycodes e077 <keycode>' to make it known.
[ 84.918346] atkbd.c: Unknown key released (translated set 2, code 0xf7 on
isa0060/serio0).
[ 84.918355] atkbd.c: Use 'setkeycodes e077 <keycode>' to make it known.
[ 84.936946] atkbd.c: Unknown key pressed (translated set 2, code 0xf7 on
isa0060/serio0).
[ 84.936956] atkbd.c: Use 'setkeycodes e077 <keycode>' to make it known.
[ 84.937794] atkbd.c: Unknown key released (translated set 2, code 0xf7 on
isa0060/serio0).
[ 84.937800] atkbd.c: Use 'setkeycodes e077 <keycode>' to make it known.
[ 84.951671] atkbd.c: Unknown key pressed (translated set 2, code 0xf7 on
isa0060/serio0).
[ 84.951681] atkbd.c: Use 'setkeycodes e077 <keycode>' to make it known.
[ 84.952413] atkbd.c: Unknown key released (translated set 2, code 0xf7 on
isa0060/serio0).
[ 84.952418] atkbd.c: Use 'setkeycodes e077 <keycode>' to make it known.
[ 85.415376] atkbd.c: Unknown key pressed (translated set 2, code 0xf8 on
isa0060/serio0).
[ 85.415387] atkbd.c: Use 'setkeycodes e078 <keycode>' to make it known.
[ 85.416284] atkbd.c: Unknown key released (translated set 2, code 0xf8 on
isa0060/serio0).
[ 85.416293] atkbd.c: Use 'setkeycodes e078 <keycode>' to make it known.
[ 85.434564] atkbd.c: Unknown key pressed (translated set 2, code 0xf8 on
isa0060/serio0).
[ 85.434575] atkbd.c: Use 'setkeycodes e078 <keycode>' to make it known.
[ 85.435409] atkbd.c: Unknown key released (translated set 2, code 0xf8 on
isa0060/serio0).
[ 85.435418] atkbd.c: Use 'setkeycodes e078 <keycode>' to make it known.
[ 85.449742] atkbd.c: Unknown key pressed (translated set 2, code 0xf8 on
isa0060/serio0).
[ 85.449753] atkbd.c: Use 'setkeycodes e078 <keycode>' to make it known.
[ 85.450484] atkbd.c: Unknown key released (translated set 2, code 0xf8 on
isa0060/serio0).
[ 85.450492] atkbd.c: Use 'setkeycodes e078 <keycode>' to make it known.
[ 85.469435] atkbd.c: Unknown key pressed (translated set 2, code 0xf8 on
isa0060/serio0).
[ 85.469445] atkbd.c: Use 'setkeycodes e078 <keycode>' to make it known.
[ 85.470273] atkbd.c: Unknown key released (translated set 2, code 0xf8 on
isa0060/serio0).
[ 85.470280] atkbd.c: Use 'setkeycodes e078 <keycode>' to make it known.
[ 85.484238] atkbd.c: Unknown key pressed (translated set 2, code 0xf8 on
isa0060/serio0).
[ 85.484249] atkbd.c: Use 'setkeycodes e078 <keycode>' to make it known.
[ 85.485083] atkbd.c: Unknown key released (translated set 2, code 0xf8 on
isa0060/serio0).
[ 85.485091] atkbd.c: Use 'setkeycodes e078 <keycode>' to make it known.
[ 104.261494] atkbd.c: Unknown key pressed (translated set 2, code 0xf6 on
isa0060/serio0).
[ 104.261503] atkbd.c: Use 'setkeycodes e076 <keycode>' to make it known.
[ 104.262354] atkbd.c: Unknown key released (translated set 2, code 0xf6 on
isa0060/serio0).
[ 104.262368] atkbd.c: Use 'setkeycodes e076 <keycode>' to make it known.
[ 110.968529] atkbd.c: Unknown key pressed (translated set 2, code 0xf6 on
isa0060/serio0).
[ 110.968540] atkbd.c: Use 'setkeycodes e076 <keycode>' to make it known.
[ 110.969398] atkbd.c: Unknown key released (translated set 2, code 0xf6 on
isa0060/serio0).
[ 110.969406] atkbd.c: Use 'setkeycodes e076 <keycode>' to make it known.
[ 116.976790] NET: Registered protocol family 17
[ 613.002984] ALSA
/build/buildd/linux-ubuntu-modules-2.6.24-2.6.24/debian/build/build-generic/sound/alsa-driver/pci/hda/../../alsa-kernel/pci/hda/hda_intel.c:593:
hda_intel: azx_get_response timeout, switching to polling mode: last
cmd=0x006f000a
+
+
+
+ -- WORKAROUND: (thanks to mwfontes): --
+
+ The problem affects only laptops, which, I don't know why, freezes if
+ you let acpi (power management) activated. Deactivate it and you'll be
+ good to go.
+
+ To do this, I used my ubuntu 9.04 live cd and edited my
+ /boot/grub/grub.cfg file. At the end of the line that should look like
+ this:
+
+ linux /boot/vmlinuz-2.6.31-15-generic root=UUID=69e4ed90-7dfe-417d-980c-
+ 5afe3818e27f ro quiet splash
+
+ I changed to:
+
+ linux /boot/vmlinuz-2.6.31-15-generic root=UUID=69e4ed90-7dfe-417d-980c-
+ 5afe3818e27f ro quiet splash acpi=off
** Package changed: ubuntu => acpi (Ubuntu)
** Changed in: acpi (Ubuntu)
Status: New => Confirmed
--
Linux Mint freezes after a while
https://bugs.launchpad.net/bugs/307645
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
--
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
