Actually I spoke too soon. My sandisk key mounts as a CDROM drive! >From dmesg:
[ 2393.506405] usb-storage: device found at 13 [ 2393.506406] usb-storage: waiting for device to settle before scanning [ 2398.504168] usb-storage: device scan complete [ 2398.506274] scsi 17:0:0:0: Direct-Access SanDisk Cruzer 7.01 PQ: 0 ANSI: 0 CCS [ 2398.506646] scsi 17:0:0:1: CD-ROM SanDisk Cruzer 7.01 PQ: 0 ANSI: 0 [ 2398.506945] sd 17:0:0:0: Attached scsi generic sg11 type 0 [ 2398.508890] sd 17:0:0:0: [sdk] 7856127 512-byte logical blocks: (4.02 GB/3.74 GiB) [ 2398.510136] sd 17:0:0:0: [sdk] Write Protect is off [ 2398.510139] sd 17:0:0:0: [sdk] Mode Sense: 45 00 00 08 [ 2398.510141] sd 17:0:0:0: [sdk] Assuming drive cache: write through [ 2398.511137] sr1: scsi3-mmc drive: 48x/48x tray [ 2398.511207] sr 17:0:0:1: Attached scsi CD-ROM sr1 [ 2398.511243] sr 17:0:0:1: Attached scsi generic sg12 type 5 [ 2398.513134] sd 17:0:0:0: [sdk] Assuming drive cache: write through [ 2398.513136] sdk: unknown partition table [ 2398.516134] sd 17:0:0:0: [sdk] Assuming drive cache: write through [ 2398.516136] sd 17:0:0:0: [sdk] Attached SCSI removable disk Not sure from the above whether sdk* or sr1 is the device, but regardless it doesn't exist if I ls /dev. usb-devices sees it as: T: Bus=01 Lev=01 Prnt=01 Port=06 Cnt=03 Dev#= 13 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=0781 ProdID=5406 Rev=02.00 S: Manufacturer=SanDisk S: Product=U3 Cruzer Micro S: SerialNumber=2204620CD800141A C: #Ifs= 1 Cfg#= 1 Atr=80 MxPwr=200mA I: If#= 0 Alt= 0 #EPs= 2 Cls=08(stor.) Sub=06 Prot=50 Driver=usb-storage Again, lsusb does not see it. --------------- My pico usb key has the same behaviour as the kingston. -- USB keys do not automount, cannot be manually mounted https://bugs.launchpad.net/bugs/553481 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs