Public bug reported: Binary package hint: yelp
I have installed BMC4312 Wireless driver b43 it was working on Ubuntu after I reinstall V4.170.25.12 XP driver in XP. It was working for 3-4 days, but then after simple restart stoped in Ubuntu. I don't see eny wireless networks (they were here before 7-10 pcs). it happened before several times and started to work again after some restarts, but now it's dead finaly also in XP. I'm trying to reinstall XP driver but it can't see eny WiFi. what is wrong? Finaly I was trying this: jan...@janlan-home:~$ lshw -C network WARNING: you should run this program as super-user. *-network description: Ethernet interface product: NetLink BCM5787M Gigabit Ethernet PCI Express vendor: Broadcom Corporation physical id: 0 bus info: p...@0000:02:00.0 logical name: eth0 version: 02 serial: 00:1d:72:ce:d2:ff width: 64 bits clock: 33MHz capabilities: bus_master cap_list ethernet physical configuration: broadcast=yes driver=tg3 driverversion=3.106 firmware=5787m-v3.23 ip=192.168.0.67 latency=0 multicast=yes resources: irq:29 memory:f6000000-f600ffff *-network description: Network controller product: BCM4312 802.11b/g vendor: Broadcom Corporation physical id: 0 bus info: p...@0000:04:00.0 version: 01 width: 64 bits clock: 33MHz capabilities: bus_master cap_list configuration: driver=b43-pci-bridge latency=0 resources: irq:17 memory:f8000000-f8003fff *-network description: Wireless interface physical id: 1 logical name: wlan1 serial: 00:22:69:73:3c:a3 capabilities: ethernet physical wireless configuration: broadcast=yes driver=b43 driverversion=2.6.33-020633-generic firmware=N/A multicast=yes wireless=IEEE 802.11bg jan...@janlan-home:~$ lspci | grep Broadcom 02:00.0 Ethernet controller: Broadcom Corporation NetLink BCM5787M Gigabit Ethernet PCI Express (rev 02) 04:00.0 Network controller: Broadcom Corporation BCM4312 802.11b/g (rev 01) jan...@janlan-home:~$ lspci -n | grep '14e4:43' 04:00.0 0280: 14e4:4315 (rev 01) jan...@janlan-home:~$ lsb_release -d Description: Ubuntu 9.10 jan...@janlan-home:~$ uname -mr 2.6.33-020633-generic i686 jan...@janlan-home:~$ echo -e 'blacklist bcm43xx\nblacklist wl' | sudo tee -a /etc/modprobe.d/blacklist [sudo] password for janlan: blacklist bcm43xx blacklist wl jan...@janlan-home:~$ wget ftp://ftp.hp.com/pub/softpaq/sp33001-33500/sp33008.exe --2010-04-03 15:24:28-- ftp://ftp.hp.com/pub/softpaq/sp33001-33500/sp33008.exe => `sp33008.exe' Resolving ftp.hp.com... 15.200.30.24, 15.217.120.22 Connecting to ftp.hp.com|15.200.30.24|:21... connected. Logging in as anonymous ... Logged in! ==> SYST ... done. ==> PWD ... done. ==> TYPE I ... done. ==> CWD /pub/softpaq/sp33001-33500 ... done. ==> SIZE sp33008.exe ... 4318656 ==> PASV ... done. ==> RETR sp33008.exe ... done. Length: 4318656 (4.1M) 0% [ ] 0 --.-K/s ^C jan...@janlan-home:~$ sudo apt-get install cabextract Reading package lists... Done Building dependency tree Reading state information... Done cabextract is already the newest version. cabextract set to manually installed. The following packages were automatically installed and are no longer required: linux-headers-2.6.31-14 liboro-java java-common libaccess-bridge-java-jni libaccess-bridge-java icedtea-6-jre-cacao default-jre openjdk-6-jre-headless dkms tzdata-java openjdk-6-jre libcommons-net-java libjline-java openjdk-6-jre-lib ffmpeg libavfilter0 rhino default-jre-headless ca-certificates-java linux-headers-2.6.31-14-generic libavdevice52 Use 'apt-get autoremove' to remove them. 0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded. jan...@janlan-home:~$ wget ftp://ftp.compaq.com/pub/softpaq/sp33001-33500/sp33008.exe --2010-04-03 15:25:25-- ftp://ftp.compaq.com/pub/softpaq/sp33001-33500/sp33008.exe => `sp33008.exe.1' Resolving ftp.compaq.com... 15.193.32.70 Connecting to ftp.compaq.com|15.193.32.70|:21... connected. Logging in as anonymous ... Logged in! ==> SYST ... done. ==> PWD ... done. ==> TYPE I ... done. ==> CWD /pub/softpaq/sp33001-33500 ... done. ==> SIZE sp33008.exe ... 4318656 ==> PASV ... done. ==> RETR sp33008.exe ... done. Length: 4318656 (4.1M) 100%[======================================>] 4,318,656 26.3K/s in 2m 22s 2010-04-03 15:27:50 (29.6 KB/s) - `sp33008.exe.1' saved [4318656] jan...@janlan-home:~$ cabextract sp33008.exe sp33008.exe: no valid cabinets found All done, errors in processing 1 file(s) jan...@janlan-home:~$ wget http://dlsvr03.asus.com/pub/ASUS/wireless/WL-100g-03/Driverv3100640.zip --2010-04-03 15:29:08-- http://dlsvr03.asus.com/pub/ASUS/wireless/WL-100g-03/Driverv3100640.zip Resolving dlsvr03.asus.com... 66.238.93.163 Connecting to dlsvr03.asus.com|66.238.93.163|:80... connected. HTTP request sent, awaiting response... 200 OK Length: 926968 (905K) [application/x-zip-compressed] Saving to: `Driverv3100640.zip' 0% [ ] 8,489 --.-K/s eta 3h 15m ^C jan...@janlan-home:~$ /etc/apt/sources.list bash: /etc/apt/sources.list: Permission denied jan...@janlan-home:~$ /etc/apt/sources.list bash: /etc/apt/sources.list: Permission denied jan...@janlan-home:~$ sudo -i r...@janlan-home:~# /etc/apt/sources.list -bash: /etc/apt/sources.list: Permission denied r...@janlan-home:~# deb http://us.archive.ubuntu.com/ubuntu/ hardy universe No command 'deb' found, did you mean: Command 'debc' from package 'devscripts' (main) Command 'derb' from package 'libicu-dev' (main) Command 'dab' from package 'bsdgames' (universe) Command 'debi' from package 'devscripts' (main) deb: command not found r...@janlan-home:~# deb-src http://us.archive.ubuntu.com/ubuntu/ hardy universe deb-src: command not found r...@janlan-home:~# deb http://us.archive.ubuntu.com/ubuntu/ hardy-updates universe No command 'deb' found, did you mean: Command 'debc' from package 'devscripts' (main) Command 'derb' from package 'libicu-dev' (main) Command 'dab' from package 'bsdgames' (universe) Command 'debi' from package 'devscripts' (main) deb: command not found r...@janlan-home:~# deb-src http://us.archive.ubuntu.com/ubuntu/ hardy-updates universe deb-src: command not found r...@janlan-home:~# sudo apt-get update Hit http://security.ubuntu.com karmic-security Release.gpg Ign http://security.ubuntu.com karmic-security/main Translation-en_US Hit http://im.archive.ubuntu.com karmic Release.gpg Ign http://im.archive.ubuntu.com karmic/main Translation-en_US Ign http://security.ubuntu.com karmic-security/restricted Translation-en_US Ign http://security.ubuntu.com karmic-security/universe Translation-en_US Ign http://security.ubuntu.com karmic-security/multiverse Translation-en_US Hit http://security.ubuntu.com karmic-security Release Ign http://im.archive.ubuntu.com karmic/restricted Translation-en_US Ign http://im.archive.ubuntu.com karmic/universe Translation-en_US Ign http://im.archive.ubuntu.com karmic/multiverse Translation-en_US Hit http://im.archive.ubuntu.com karmic-updates Release.gpg Ign http://im.archive.ubuntu.com karmic-updates/main Translation-en_US Ign http://im.archive.ubuntu.com karmic-updates/restricted Translation-en_US Ign http://im.archive.ubuntu.com karmic-updates/universe Translation-en_US Ign http://im.archive.ubuntu.com karmic-updates/multiverse Translation-en_US Hit http://im.archive.ubuntu.com karmic Release Hit http://security.ubuntu.com karmic-security/main Packages Hit http://im.archive.ubuntu.com karmic-updates Release Hit http://security.ubuntu.com karmic-security/restricted Packages Hit http://security.ubuntu.com karmic-security/main Sources Hit http://security.ubuntu.com karmic-security/restricted Sources Hit http://im.archive.ubuntu.com karmic/main Packages Hit http://im.archive.ubuntu.com karmic/restricted Packages Hit http://im.archive.ubuntu.com karmic/main Sources Hit http://im.archive.ubuntu.com karmic/restricted Sources Hit http://security.ubuntu.com karmic-security/universe Packages Hit http://security.ubuntu.com karmic-security/universe Sources Hit http://security.ubuntu.com karmic-security/multiverse Packages Hit http://security.ubuntu.com karmic-security/multiverse Sources Hit http://im.archive.ubuntu.com karmic/universe Packages Hit http://im.archive.ubuntu.com karmic/universe Sources Hit http://im.archive.ubuntu.com karmic/multiverse Packages Hit http://im.archive.ubuntu.com karmic/multiverse Sources Hit http://im.archive.ubuntu.com karmic-updates/main Packages Hit http://im.archive.ubuntu.com karmic-updates/restricted Packages Hit http://im.archive.ubuntu.com karmic-updates/main Sources Hit http://im.archive.ubuntu.com karmic-updates/restricted Sources Hit http://im.archive.ubuntu.com karmic-updates/universe Packages Hit http://im.archive.ubuntu.com karmic-updates/universe Sources Hit http://im.archive.ubuntu.com karmic-updates/multiverse Packages Hit http://im.archive.ubuntu.com karmic-updates/multiverse Sources Reading package lists... Done r...@janlan-home:~# deb http://archive.canonical.com/ubuntu hardy partner No command 'deb' found, did you mean: Command 'debc' from package 'devscripts' (main) Command 'derb' from package 'libicu-dev' (main) Command 'dab' from package 'bsdgames' (universe) Command 'debi' from package 'devscripts' (main) deb: command not found r...@janlan-home:~# deb-src http://archive.canonical.com/ubuntu hardy partner deb-src: command not found r...@janlan-home:~# sudo apt-get update Hit http://security.ubuntu.com karmic-security Release.gpg Ign http://security.ubuntu.com karmic-security/main Translation-en_US Hit http://im.archive.ubuntu.com karmic Release.gpg Ign http://im.archive.ubuntu.com karmic/main Translation-en_US Ign http://security.ubuntu.com karmic-security/restricted Translation-en_US Ign http://security.ubuntu.com karmic-security/universe Translation-en_US Ign http://security.ubuntu.com karmic-security/multiverse Translation-en_US Hit http://security.ubuntu.com karmic-security Release Ign http://im.archive.ubuntu.com karmic/restricted Translation-en_US Ign http://im.archive.ubuntu.com karmic/universe Translation-en_US Ign http://im.archive.ubuntu.com karmic/multiverse Translation-en_US Hit http://im.archive.ubuntu.com karmic-updates Release.gpg Ign http://im.archive.ubuntu.com karmic-updates/main Translation-en_US Ign http://im.archive.ubuntu.com karmic-updates/restricted Translation-en_US Hit http://security.ubuntu.com karmic-security/main Packages Ign http://im.archive.ubuntu.com karmic-updates/universe Translation-en_US Ign http://im.archive.ubuntu.com karmic-updates/multiverse Translation-en_US Hit http://im.archive.ubuntu.com karmic Release Hit http://im.archive.ubuntu.com karmic-updates Release Hit http://security.ubuntu.com karmic-security/restricted Packages Hit http://security.ubuntu.com karmic-security/main Sources Hit http://security.ubuntu.com karmic-security/restricted Sources Hit http://im.archive.ubuntu.com karmic/main Packages Hit http://im.archive.ubuntu.com karmic/restricted Packages Hit http://im.archive.ubuntu.com karmic/main Sources Hit http://im.archive.ubuntu.com karmic/restricted Sources Hit http://security.ubuntu.com karmic-security/universe Packages Hit http://security.ubuntu.com karmic-security/universe Sources Hit http://security.ubuntu.com karmic-security/multiverse Packages Hit http://security.ubuntu.com karmic-security/multiverse Sources Hit http://im.archive.ubuntu.com karmic/universe Packages Hit http://im.archive.ubuntu.com karmic/universe Sources Hit http://im.archive.ubuntu.com karmic/multiverse Packages Hit http://im.archive.ubuntu.com karmic/multiverse Sources Hit http://im.archive.ubuntu.com karmic-updates/main Packages Hit http://im.archive.ubuntu.com karmic-updates/restricted Packages Hit http://im.archive.ubuntu.com karmic-updates/main Sources Hit http://im.archive.ubuntu.com karmic-updates/restricted Sources Hit http://im.archive.ubuntu.com karmic-updates/universe Packages Hit http://im.archive.ubuntu.com karmic-updates/universe Sources Hit http://im.archive.ubuntu.com karmic-updates/multiverse Packages Hit http://im.archive.ubuntu.com karmic-updates/multiverse Sources Reading package lists... Done r...@janlan-home:~# cabextract sp33008.exe sp33008.exe: No such file or directory All done, errors in processing 1 file(s) r...@janlan-home:~# sudo apt-get install cabextract Reading package lists... Done Building dependency tree Reading state information... Done cabextract is already the newest version. The following packages were automatically installed and are no longer required: linux-headers-2.6.31-14 liboro-java java-common libaccess-bridge-java-jni libaccess-bridge-java icedtea-6-jre-cacao default-jre openjdk-6-jre-headless dkms tzdata-java openjdk-6-jre libcommons-net-java libjline-java openjdk-6-jre-lib ffmpeg libavfilter0 rhino default-jre-headless ca-certificates-java linux-headers-2.6.31-14-generic libavdevice52 Use 'apt-get autoremove' to remove them. 0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded. r...@janlan-home:~# wget ftp://ftp.compaq.com/pub/softpaq/sp33001-33500/sp33008.exe --2010-04-03 15:36:58-- ftp://ftp.compaq.com/pub/softpaq/sp33001-33500/sp33008.exe => `sp33008.exe' Resolving ftp.compaq.com... 15.193.32.70 Connecting to ftp.compaq.com|15.193.32.70|:21... connected. Logging in as anonymous ... Logged in! ==> SYST ... done. ==> PWD ... done. ==> TYPE I ... done. ==> CWD /pub/softpaq/sp33001-33500 ... done. ==> SIZE sp33008.exe ... 4318656 ==> PASV ... done. ==> RETR sp33008.exe ... done. Length: 4318656 (4.1M) 100%[======================================>] 4,318,656 42.7K/s in 2m 7s 2010-04-03 15:39:06 (33.3 KB/s) - `sp33008.exe' saved [4318656] r...@janlan-home:~# cabextract sp33008.exe Extracting cabinet: sp33008.exe extracting bcm1xsup.dll extracting bcm43xx.cat extracting bcm43xx64.cat extracting Bcmnpf64.sys extracting bcmwl5.inf extracting bcmwl5.sys extracting bcmwl564.sys extracting bcmwliss.dll extracting bcmwlnpf.sys extracting bcmwlpkt.dll extracting bcmwls.ini extracting bcmwls32.exe extracting bcmwls64.exe extracting bcmwlu00.exe extracting data1.cab extracting data1.hdr extracting data2.cab extracting ikernel.ex_ extracting is.exe extracting launcher.ini extracting layout.bin extracting setup.exe extracting Setup.ini extracting setup.inx extracting setup.iss extracting sp33008.cva All done, no errors. r...@janlan-home:~# sudo ndiswrapper -i bcmwl5.inf sudo: ndiswrapper: command not found r...@janlan-home:~# ndiswrapper -l The program 'ndiswrapper' is currently not installed. You can install it by typing: apt-get install ndiswrapper-common ndiswrapper: command not found r...@janlan-home:~# sudo depmod -a r...@janlan-home:~# sudo modprobe ndiswrapper WARNING: All config files need .conf: /etc/modprobe.d/blacklist, it will be ignored in a future release. FATAL: Module ndiswrapper not found. r...@janlan-home:~# sudo cp /etc/network/interfaces /etc/network/interfaces.orig r...@janlan-home:~# echo -e 'auto lo\niface lo inet loopback\n' | sudo tee /etc/network/interfaces auto lo iface lo inet loopback r...@janlan-home:~# sudo ndiswrapper -m sudo: ndiswrapper: command not found r...@janlan-home:~# echo 'ndiswrapper' | sudo tee -a /etc/modules ndiswrapper r...@janlan-home:~# echo 'ENABLED=0' | sudo tee -a /etc/default/wpasupplicant ENABLED=0 r...@janlan-home:~# r...@janlan-home:~# sudo ndiswrapper -i bcmwl5.inf installing bcmwl5 ... forcing parameter IBSSGMode from 0 to 2 forcing parameter IBSSGMode from 0 to 2 forcing parameter IBSSGMode from 0 to 2 forcing parameter IBSSGMode from 0 to 2 forcing parameter IBSSGMode from 0 to 2 forcing parameter IBSSGMode from 0 to 2 forcing parameter IBSSGMode from 0 to 2 forcing parameter IBSSGMode from 0 to 2 forcing parameter IBSSGMode from 0 to 2 forcing parameter IBSSGMode from 0 to 2 forcing parameter IBSSGMode from 0 to 2 forcing parameter IBSSGMode from 0 to 2 forcing parameter IBSSGMode from 0 to 2 forcing parameter IBSSGMode from 0 to 2 forcing parameter IBSSGMode from 0 to 2 forcing parameter IBSSGMode from 0 to 2 forcing parameter IBSSGMode from 0 to 2 forcing parameter IBSSGMode from 0 to 2 forcing parameter IBSSGMode from 0 to 2 forcing parameter IBSSGMode from 0 to 2 r...@janlan-home:~# ndiswrapper -l bcmwl5 : driver installed r...@janlan-home:~# sudo depmod -a r...@janlan-home:~# sudo modprobe ndiswrapper WARNING: All config files need .conf: /etc/modprobe.d/blacklist, it will be ignored in a future release. FATAL: Module ndiswrapper not found. r...@janlan-home:~# sudo cp /etc/network/interfaces /etc/network/interfaces.orig r...@janlan-home:~# echo -e 'auto lo\niface lo inet loopback\n' | sudo tee /etc/network/interfaces auto lo iface lo inet loopback r...@janlan-home:~# sudo ndiswrapper -m WARNING: All config files need .conf: /etc/modprobe.d/blacklist, it will be ignored in a future release. adding "alias wlan0 ndiswrapper" to /etc/modprobe.d/ndiswrapper ... r...@janlan-home:~# echo 'ndiswrapper' | sudo tee -a /etc/modules ndiswrapper r...@janlan-home:~# echo 'ENABLED=0' | sudo tee -a /etc/default/wpasupplicant ENABLED=0 r...@janlan-home:~# lshw -C network *-network description: Ethernet interface product: NetLink BCM5787M Gigabit Ethernet PCI Express vendor: Broadcom Corporation physical id: 0 bus info: p...@0000:02:00.0 logical name: eth0 version: 02 serial: 00:1d:72:ce:d2:ff size: 100MB/s capacity: 1GB/s width: 64 bits clock: 33MHz capabilities: pm vpd msi pciexpress bus_master cap_list ethernet physical tp 10bt 10bt-fd 100bt 100bt-fd 1000bt 1000bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=tg3 driverversion=3.106 duplex=full firmware=5787m-v3.23 ip=192.168.0.67 latency=0 link=yes multicast=yes port=twisted pair speed=100MB/s resources: irq:29 memory:f6000000-f600ffff *-network description: Network controller product: BCM4312 802.11b/g vendor: Broadcom Corporation physical id: 0 bus info: p...@0000:04:00.0 version: 01 width: 64 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list configuration: driver=b43-pci-bridge latency=0 resources: irq:17 memory:f8000000-f8003fff *-network description: Wireless interface physical id: 1 logical name: wlan1 serial: 00:22:69:73:3c:a3 capabilities: ethernet physical wireless configuration: broadcast=yes driver=b43 driverversion=2.6.33-020633-generic firmware=N/A link=no multicast=yes wireless=IEEE 802.11bg r...@janlan-home:~# ProblemType: Bug Architecture: i386 Date: Sun Apr 4 02:26:43 2010 DistroRelease: Ubuntu 9.10 ExecutablePath: /usr/bin/yelp InstallationMedia: Ubuntu 9.10 "Karmic Koala" - Release i386 (20091028.5) Package: yelp 2.28.0-0ubuntu2 ProcEnviron: LANGUAGE=en_US.UTF-8 LANG=en_US.UTF-8 SHELL=/bin/bash SourcePackage: yelp Uname: Linux 2.6.33-020633-generic i686 ** Affects: yelp (Ubuntu) Importance: Undecided Status: New ** Tags: apport-bug i386 -- BCM4312 have stopped after simple restart in Ubuntu and XP https://bugs.launchpad.net/bugs/554933 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs