*** This bug is a duplicate of bug 544548 ***
https://bugs.launchpad.net/bugs/544548
Public bug reported:
The problem appeared imediately after upgrade from Karmic to Lucid - I can't
get ATA interface working on kernel 2.6.32 while it was working without
problems on 2.6.31.
Kernel says that ATA interface is "limited to UDMA/33 due to 40-wire cable" but
I have 80-wire cable which worked without problems on Kubuntu versions from
Breezy/Dapper to Karmic...
After it's finding devices the ATA interface gets timeout and resets in
consequence after few tries it gets disabled.
$ dmesg | grep ata
[ 0.000000] BIOS-e820: 00000000abfd0000 - 00000000abfde000 (ACPI data)
[ 0.000000] modified: 00000000abfd0000 - 00000000abfde000 (ACPI data)
[ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000
- 0000001000]
[ 0.000000] Memory: 2762944k/2817856k available (4673k kernel code, 53452k
reserved, 2122k data, 656k init, 1908552k highmem)
[ 0.000000] .data : 0xc0590613 - 0xc07a2e48 (2122 kB)
[ 0.248347] libata version 3.00 loaded.
[ 0.357334] pata_acpi 0000:00:0f.0: PCI INT B -> GSI 20 (level, low) -> IRQ
20
[ 0.357404] pata_acpi 0000:00:0f.0: PCI INT B disabled
[ 0.357432] pata_acpi 0000:00:0f.1: can't derive routing for PCI INT A
[ 0.357475] pata_acpi 0000:00:0f.1: can't derive routing for PCI INT A
[ 0.714189] Write protecting the kernel read-only data: 1840k
[ 1.021893] sata_via 0000:00:0f.0: version 2.4
[ 1.021915] sata_via 0000:00:0f.0: PCI INT B -> GSI 20 (level, low) -> IRQ 20
[ 1.021973] sata_via 0000:00:0f.0: routed to hard irq line 5
[ 1.051184] scsi0 : sata_via
[ 1.051518] scsi1 : sata_via
[ 1.054428] ata1: SATA max UDMA/133 cmd 0xcc00 ctl 0xc480 bmdma 0xc000 irq 20
[ 1.054435] ata2: SATA max UDMA/133 cmd 0xc400 ctl 0xc080 bmdma 0xc008 irq 20
[ 1.269018] ata1: SATA link down 1.5 Gbps (SStatus 0 SControl 300)
[ 1.480018] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 1.652220] ata2.00: HPA unlocked: 488395055 -> 488397168, native 488397168
[ 1.652228] ata2.00: ATA-7: ST3250823AS, 3.03, max UDMA/133
[ 1.652232] ata2.00: 488397168 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 1.668388] ata2.00: configured for UDMA/133
[ 17.658132] EXT3-fs: mounted filesystem with ordered data mode.
[ 56.566278] pata_via 0000:00:0f.1: version 0.3.4
[ 56.566319] pata_via 0000:00:0f.1: can't derive routing for PCI INT A
[ 56.607356] scsi2 : pata_via
[ 56.658125] scsi3 : pata_via
[ 56.662704] ata3: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xfc00 irq 14
[ 56.662712] ata4: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xfc08 irq 15
[ 57.029578] ata3.00: ATAPI: HL-DT-STDVDRRW GSA-4166B, 1.02, max UDMA/66
[ 57.029646] ata3.01: ATAPI: LITE-ON DVDRW SOHW-1213S, TSD1, max UDMA/66
[ 57.029694] ata3.00: limited to UDMA/33 due to 40-wire cable
[ 57.029699] ata3.01: limited to UDMA/33 due to 40-wire cable
[ 57.045476] ata3.00: configured for UDMA/33
[ 57.061354] ata3.01: configured for UDMA/33
[ 57.259484] EXT3-fs: mounted filesystem with ordered data mode.
[ 138.805032] ata3: lost interrupt (Status 0x51)
[ 143.804041] ata3.00: qc timeout (cmd 0xa0)
[ 143.804057] ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
[ 143.804082] ata3.00: cmd a0/00:00:00:00:00/00:00:00:00:00/a0 tag 0
[ 143.804088] ata3.00: status: { DRDY ERR }
[ 143.804117] ata3: soft resetting link
[ 144.160399] ata3.00: configured for UDMA/33
[ 144.176289] ata3.01: configured for UDMA/33
[ 149.176040] ata3.00: qc timeout (cmd 0xa0)
[ 149.176050] ata3.00: TEST_UNIT_READY failed (err_mask=0x5)
[ 149.176080] ata3: soft resetting link
[ 149.532393] ata3.00: configured for UDMA/33
[ 149.548306] ata3.01: configured for UDMA/33
[ 154.548043] ata3.00: qc timeout (cmd 0xa0)
[ 154.548053] ata3.00: TEST_UNIT_READY failed (err_mask=0x5)
[ 154.548060] ata3.00: limiting speed to UDMA/33:PIO3
[ 154.548088] ata3: soft resetting link
[ 154.904412] ata3.00: configured for UDMA/33
[ 154.920293] ata3.01: configured for UDMA/33
[ 159.920044] ata3.00: qc timeout (cmd 0xa0)
[ 159.920053] ata3.00: TEST_UNIT_READY failed (err_mask=0x5)
[ 159.920057] ata3.00: disabled
[ 159.920075] ata3.01: TEST_UNIT_READY failed (err_mask=0x40)
[ 159.920101] ata3: soft resetting link
[ 160.268302] ata3.01: configured for UDMA/33
[ 165.268037] ata3.01: qc timeout (cmd 0xa0)
[ 165.268047] ata3.01: TEST_UNIT_READY failed (err_mask=0x5)
[ 165.268053] ata3.01: limiting speed to UDMA/33:PIO3
[ 165.268082] ata3: soft resetting link
[ 165.616312] ata3.01: configured for UDMA/33
[ 170.616040] ata3.01: qc timeout (cmd 0xa0)
[ 170.616050] ata3.01: TEST_UNIT_READY failed (err_mask=0x5)
[ 170.616055] ata3.01: disabled
[ 170.616103] ata3: soft resetting link
[ 170.940119] ata3: EH complete
ProblemType: Bug
DistroRelease: Ubuntu 10.04
Package: linux-image-2.6.32-21-generic 2.6.32-21.32
Regression: Yes
Reproducible: Yes
ProcVersionSignature: Ubuntu 2.6.32-21.32-generic 2.6.32.11+drm33.2
Uname: Linux 2.6.32-21-generic i686
AlsaVersion: Advanced Linux Sound Architecture Driver Version 1.0.21.
Architecture: i386
AudioDevicesInUse:
USER PID ACCESS COMMAND
/dev/snd/controlC0: xeros 28843 F.... pulseaudio
xeros 28867 F.... kmix
/dev/snd/controlC1: xeros 28843 F.... pulseaudio
xeros 28867 F.... kmix
CRDA: Error: command ['iw', 'reg', 'get'] failed with exit code 1: nl80211 not
found.
Card0.Amixer.info:
Card hw:0 'V8237'/'VIA 8237 with AD1888 at 0xa800, irq 22'
Mixer name : 'Analog Devices AD1888'
Components : 'AC97a:41445368'
Controls : 52
Simple ctrls : 34
Card1.Amixer.info:
Card hw:1 'Bt878'/'Brooktree Bt878 at 0xafffe000, irq 17'
Mixer name : 'Bt87x'
Components : ''
Controls : 3
Simple ctrls : 5
Date: Sat Apr 17 16:27:40 2010
HibernationDevice: RESUME=UUID=4dc6e49e-e55e-4c9e-b35c-6c6db9dbd3d1
MachineType: System manufacturer System Product Name
ProcCmdLine: root=UUID=82e29357-9603-403e-86ed-b37dcc794d6b ro ipv6.disable=1
quiet splash
ProcEnviron:
LANGUAGE=
PATH=(custom, user)
LANG=pl_PL.UTF-8
SHELL=/bin/bash
RelatedPackageVersions: linux-firmware 1.34
RfKill:
0: hci0: Bluetooth
Soft blocked: no
Hard blocked: no
SourcePackage: linux
WifiSyslog:
Apr 17 15:52:29 Wiolusia NetworkManager: SCPlugin-Ifupdown: devices added
(path: /sys/devices/virtual/net/ppp0, iface: ppp0)
Apr 17 15:52:29 Wiolusia NetworkManager: SCPlugin-Ifupdown: device added
(path: /sys/devices/virtual/net/ppp0, iface: ppp0): no ifupdown configuration
found.
Apr 17 16:11:39 Wiolusia kernel: [ 2093.440635] udev: starting version 151
WpaSupplicantLog:
dmi.bios.date: 08/17/2006
dmi.bios.vendor: American Megatrends Inc.
dmi.bios.version: 0704
dmi.board.asset.tag: To Be Filled By O.E.M.
dmi.board.name: P4V800D-X
dmi.board.vendor: ASUSTeK Computer INC.
dmi.board.version: Rev X.XX
dmi.chassis.asset.tag: Asset-1234567890
dmi.chassis.type: 3
dmi.chassis.vendor: Chassis Manufacture
dmi.chassis.version: Chassis Version
dmi.modalias:
dmi:bvnAmericanMegatrendsInc.:bvr0704:bd08/17/2006:svnSystemmanufacturer:pnSystemProductName:pvrSystemVersion:rvnASUSTeKComputerINC.:rnP4V800D-X:rvrRevX.XX:cvnChassisManufacture:ct3:cvrChassisVersion:
dmi.product.name: System Product Name
dmi.product.version: System Version
dmi.sys.vendor: System manufacturer
** Affects: linux (Ubuntu)
Importance: Undecided
Status: New
** Tags: apport-bug i386 lucid needs-upstream-testing regression-proposed
--
[Lucid] pata_via: ATA interface resets and gets disabled: ata3.00: limited to
UDMA/33 due to 40-wire cable, TEST_UNIT_READY failed (err_mask=0x5)
https://bugs.launchpad.net/bugs/565397
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
--
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
