** Summary changed: - [gm45] Screen flickers + [gm45] Screen flickers (Needs i915.powersave=0)
** Description changed: Binary package hint: xorg Fresh install Ubuntu 10.04LTS Lucid Lynx 64bit Dell Inspiron 1545 Laptop Screen flickers every couple of minutes for like a second sometimes longer, bottom half mostly .(it crashed the computer once) I started a blog and found there were others with the same problem http://ubuntuforums.org/showthread.php?t=1473580 Cant find a solution to this problem. - here some info on me - pe...@peter-laptop:~$ sudo lspci - 00:00.0 Host bridge: Intel Corporation Mobile 4 Series Chipset Memory Controller Hub (rev 07) - 00:02.0 VGA compatible controller: Intel Corporation Mobile 4 Series Chipset Integrated Graphics Controller (rev 07) - 00:02.1 Display controller: Intel Corporation Mobile 4 Series Chipset Integrated Graphics Controller (rev 07) - 00:1a.0 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #4 (rev 03) - 00:1a.1 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #5 (rev 03) - 00:1a.2 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #6 (rev 03) - 00:1a.7 USB Controller: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #2 (rev 03) - 00:1b.0 Audio device: Intel Corporation 82801I (ICH9 Family) HD Audio Controller (rev 03) - 00:1c.0 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 1 (rev 03) - 00:1c.1 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 2 (rev 03) - 00:1c.2 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 3 (rev 03) - 00:1c.4 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 5 (rev 03) - 00:1d.0 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #1 (rev 03) - 00:1d.1 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #2 (rev 03) - 00:1d.2 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #3 (rev 03) - 00:1d.7 USB Controller: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #1 (rev 03) - 00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev 93) - 00:1f.0 ISA bridge: Intel Corporation ICH9M LPC Interface Controller (rev 03) - 00:1f.2 SATA controller: Intel Corporation ICH9M/M-E SATA AHCI Controller (rev 03) - 00:1f.3 SMBus: Intel Corporation 82801I (ICH9 Family) SMBus Controller (rev 03) - 09:00.0 Ethernet controller: Marvell Technology Group Ltd. 88E8040 PCI-E Fast Ethernet Controller (rev 13) - 0c:00.0 Network controller: Broadcom Corporation BCM4322 802.11a/b/g/n Wireless LAN Controller (rev 01) - pe...@peter-laptop:~$ - - - pe...@peter-laptop:~$ cat /var/log/Xorg.0.log - - X.Org X Server 1.7.6 - Release Date: 2010-03-17 - X Protocol Version 11, Revision 0 - Build Operating System: Linux 2.6.24-27-server x86_64 Ubuntu - Current Operating System: Linux peter-laptop 2.6.32-22-generic #33-Ubuntu SMP Wed Apr 28 13:28:05 UTC 2010 x86_64 - Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.32-22-generic root=UUID=1aff2380-116e-49c4-8561-6c4e8987bea2 ro quiet splash - Build Date: 23 April 2010 05:11:46PM - xorg-server 2:1.7.6-2ubuntu7 (Bryce Harrington <br...@ubuntu.com>) - Current version of pixman: 0.16.4 - Before reporting problems, check http://wiki.x.org - to make sure that you have the latest version. - Markers: (--) probed, (**) from config file, (==) default setting, - (++) from command line, (!!) notice, (II) informational, - (WW) warning, (EE) error, (NI) not implemented, (??) unknown. - (==) Log file: "/var/log/Xorg.0.log", Time: Tue May 11 11:17:57 2010 - (==) Using config directory: "/usr/lib/X11/xorg.conf.d" - (==) No Layout section. Using the first Screen section. - (==) No screen section available. Using defaults. - (**) |-->Screen "Default Screen Section" (0) - (**) | |-->Monitor "<default monitor>" - (==) No monitor specified for screen "Default Screen Section". - Using a default monitor configuration. - (==) Automatically adding devices - (==) Automatically enabling devices - (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist. - Entry deleted from font path. - (==) FontPath set to: - /usr/share/fonts/X11/misc, - /usr/share/fonts/X11/100dpi/:unscaled, - /usr/share/fonts/X11/75dpi/:unscaled, - /usr/share/fonts/X11/Type1, - /usr/share/fonts/X11/100dpi, - /usr/share/fonts/X11/75dpi, - /var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType, - built-ins - (==) ModulePath set to "/usr/lib/xorg/extra-modules,/usr/lib/xorg/modules" - (II) The server relies on udev to provide the list of input devices. - If no devices become available, reconfigure udev or disable AutoAddDevices. - (II) Loader magic: 0x7ca300 - (II) Module ABI versions: - X.Org ANSI C Emulation: 0.4 - X.Org Video Driver: 6.0 - X.Org XInput driver : 7.0 - X.Org Server Extension : 2.0 - (++) using VT number 7 - - (--) PCI:*(0:0:2:0) 8086:2a42:1028:02aa Intel Corporation Mobile 4 Series Chipset Integrated Graphics Controller rev 7, Mem @ 0xf6c00000/4194304, 0xe0000000/268435456, I/O @ 0x0000efe8/8 - (--) PCI: (0:0:2:1) 8086:2a43:1028:02aa Intel Corporation Mobile 4 Series Chipset Integrated Graphics Controller rev 7, Mem @ 0xf6b00000/1048576 - (II) Open ACPI successful (/var/run/acpid.socket) - (II) LoadModule: "extmod" - (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so - (II) Module extmod: vendor="X.Org Foundation" - compiled for 1.7.6, module version = 1.0.0 - Module class: X.Org Server Extension - ABI class: X.Org Server Extension, version 2.0 - (II) Loading extension MIT-SCREEN-SAVER - (II) Loading extension XFree86-VidModeExtension - (II) Loading extension XFree86-DGA - (II) Loading extension DPMS - (II) Loading extension XVideo - (II) Loading extension XVideo-MotionCompensation - (II) Loading extension X-Resource - (II) LoadModule: "dbe" - (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so - (II) Module dbe: vendor="X.Org Foundation" - compiled for 1.7.6, module version = 1.0.0 - Module class: X.Org Server Extension - ABI class: X.Org Server Extension, version 2.0 - (II) Loading extension DOUBLE-BUFFER - (II) LoadModule: "glx" - (II) Loading /usr/lib/xorg/modules/extensions/libglx.so - (II) Module glx: vendor="X.Org Foundation" - compiled for 1.7.6, module version = 1.0.0 - ABI class: X.Org Server Extension, version 2.0 - (==) AIGLX enabled - (II) Loading extension GLX - (II) LoadModule: "record" - (II) Loading /usr/lib/xorg/modules/extensions/librecord.so - (II) Module record: vendor="X.Org Foundation" - compiled for 1.7.6, module version = 1.13.0 - Module class: X.Org Server Extension - ABI class: X.Org Server Extension, version 2.0 - (II) Loading extension RECORD - (II) LoadModule: "dri" - (II) Loading /usr/lib/xorg/modules/extensions/libdri.so - (II) Module dri: vendor="X.Org Foundation" - compiled for 1.7.6, module version = 1.0.0 - ABI class: X.Org Server Extension, version 2.0 - (II) Loading extension XFree86-DRI - (II) LoadModule: "dri2" - (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so - (II) Module dri2: vendor="X.Org Foundation" - compiled for 1.7.6, module version = 1.1.0 - ABI class: X.Org Server Extension, version 2.0 - (II) Loading extension DRI2 - (==) Matched intel as autoconfigured driver 0 - (==) Matched vesa as autoconfigured driver 1 - (==) Matched fbdev as autoconfigured driver 2 - (==) Assigned the driver to the xf86ConfigLayout - (II) LoadModule: "intel" - (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so - (II) Module intel: vendor="X.Org Foundation" - compiled for 1.7.6, module version = 2.11.0 - Module class: X.Org Video Driver - ABI class: X.Org Video Driver, version 6.0 - (II) LoadModule: "vesa" - (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so - (II) Module vesa: vendor="X.Org Foundation" - compiled for 1.7.6, module version = 2.3.0 - Module class: X.Org Video Driver - ABI class: X.Org Video Driver, version 6.0 - (II) LoadModule: "fbdev" - (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so - (II) Module fbdev: vendor="X.Org Foundation" - compiled for 1.7.6, module version = 0.4.1 - ABI class: X.Org Video Driver, version 6.0 - (II) intel: Driver for Intel Integrated Graphics Chipsets: i810, - i810-dc100, i810e, i815, i830M, 845G, 852GM/855GM, 865G, 915G, - E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM, Pineview G, - 965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33, GM45, - 4 Series, G45/G43, Q45/Q43, G41, B43, Clarkdale, Arrandale - (II) VESA: driver for VESA chipsets: vesa - (II) FBDEV: driver for framebuffer: fbdev - (II) Primary Device is: PCI 0...@00:02:0 - (WW) Falling back to old probe method for vesa - (WW) Falling back to old probe method for fbdev - (II) Loading sub module "fbdevhw" - (II) LoadModule: "fbdevhw" - (II) Loading /usr/lib/xorg/modules/linux/libfbdevhw.so - (II) Module fbdevhw: vendor="X.Org Foundation" - compiled for 1.7.6, module version = 0.0.2 - ABI class: X.Org Video Driver, version 6.0 - drmOpenDevice: node name is /dev/dri/card0 - drmOpenDevice: open result is 9, (OK) - drmOpenByBusid: Searching for BusID pci:0000:00:02.0 - drmOpenDevice: node name is /dev/dri/card0 - drmOpenDevice: open result is 9, (OK) - drmOpenByBusid: drmOpenMinor returns 9 - drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0 - (II) intel(0): Creating default Display subsection in Screen section - "Default Screen Section" for depth/fbbpp 24/32 - (==) intel(0): Depth 24, (--) framebuffer bpp 32 - (==) intel(0): RGB weight 888 - (==) intel(0): Default visual is TrueColor - (II) intel(0): Integrated Graphics Chipset: Intel(R) GM45 - (--) intel(0): Chipset: "GM45" - (==) intel(0): video overlay key set to 0x101fe - (II) intel(0): Output VGA1 has no monitor section - (II) intel(0): Output LVDS1 has no monitor section - (II) intel(0): found backlight control interface /sys/class/backlight/acpi_video0 - (II) intel(0): Output DP1 has no monitor section - (II) intel(0): EDID for output VGA1 - (II) intel(0): EDID for output LVDS1 - (II) intel(0): Manufacturer: SEC Model: 5441 Serial#: 0 - (II) intel(0): Year: 2008 Week: 0 - (II) intel(0): EDID Version: 1.3 - (II) intel(0): Digital Display Input - (II) intel(0): Max Image Size [cm]: horiz.: 34 vert.: 19 - (II) intel(0): Gamma: 2.20 - (II) intel(0): No DPMS capabilities specified - (II) intel(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4 - (II) intel(0): First detailed timing is preferred mode - (II) intel(0): redX: 0.580 redY: 0.340 greenX: 0.310 greenY: 0.550 - (II) intel(0): blueX: 0.155 blueY: 0.155 whiteX: 0.313 whiteY: 0.329 - (II) intel(0): Manufacturer's mask: 0 - (II) intel(0): Supported detailed timing: - (II) intel(0): clock: 72.3 MHz Image Size: 353 x 198 mm - (II) intel(0): h_active: 1366 h_sync: 1414 h_sync_end 1446 h_blank_end 1526 h_border: 0 - (II) intel(0): v_active: 768 v_sync: 770 v_sync_end 775 v_blanking: 790 v_border: 0 - (II) intel(0): Supported detailed timing: - (II) intel(0): clock: 72.3 MHz Image Size: 344 x 194 mm - (II) intel(0): h_active: 1366 h_sync: 1414 h_sync_end 1446 h_blank_end 1526 h_border: 0 - (II) intel(0): v_active: 768 v_sync: 770 v_sync_end 775 v_blanking: 790 v_border: 0 - (II) intel(0): R801J�156AT - (II) intel(0): Unknown vendor-specific block 0 - (II) intel(0): EDID (in hex): - (II) intel(0): 00ffffffffffff004ca3415400000000 - (II) intel(0): 00120103902213780a87f594574f8c27 - (II) intel(0): 27505400000001010101010101010101 - (II) intel(0): 010101010101411c56a0500016303020 - (II) intel(0): 250061c61000001a411c56a050001630 - (II) intel(0): 3020250058c21000001a000000fe0052 - (II) intel(0): 3830314a8031353641540a2000000000 - (II) intel(0): 00000000000000000001010a20200036 - (II) intel(0): Not using default mode "320x240" (doublescan mode not supported) - (II) intel(0): Not using default mode "400x300" (doublescan mode not supported) - (II) intel(0): Not using default mode "400x300" (doublescan mode not supported) - (II) intel(0): Not using default mode "512x384" (doublescan mode not supported) - (II) intel(0): Not using default mode "640x480" (doublescan mode not supported) - (II) intel(0): Not using default mode "640x512" (doublescan mode not supported) - (II) intel(0): Not using default mode "800x600" (doublescan mode not supported) - (II) intel(0): Not using default mode "896x672" (doublescan mode not supported) - (II) intel(0): Not using default mode "928x696" (doublescan mode not supported) - (II) intel(0): Not using default mode "960x720" (doublescan mode not supported) - (II) intel(0): Not using default mode "576x432" (doublescan mode not supported) - (II) intel(0): Not using default mode "680x384" (doublescan mode not supported) - (II) intel(0): Not using default mode "680x384" (doublescan mode not supported) - (II) intel(0): Not using default mode "700x525" (doublescan mode not supported) - (II) intel(0): Not using default mode "720x450" (doublescan mode not supported) - (II) intel(0): Not using default mode "800x512" (doublescan mode not supported) - (II) intel(0): Not using default mode "840x525" (doublescan mode not supported) - (II) intel(0): Not using default mode "840x525" (doublescan mode not supported) - (II) intel(0): Not using default mode "960x540" (doublescan mode not supported) - (II) intel(0): Not using default mode "960x600" (doublescan mode not supported) - (II) intel(0): Not using default mode "1024x768" (doublescan mode not supported) - (II) intel(0): Printing probed modes for output LVDS1 - (II) intel(0): Modeline "1366x768"x60.0 72.33 1366 1414 1446 1526 768 770 775 790 +hsync -vsync (47.4 kHz) - (II) intel(0): Modeline "1360x768"x59.8 84.75 1360 1432 1568 1776 768 771 781 798 -hsync +vsync (47.7 kHz) - (II) intel(0): Modeline "1360x768"x60.0 72.00 1360 1408 1440 1520 768 771 781 790 +hsync -vsync (47.4 kHz) - (II) intel(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz) - (II) intel(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz) - (II) intel(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz) - (II) intel(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz) - (II) intel(0): EDID for output DP1 - (II) intel(0): Output VGA1 disconnected - (II) intel(0): Output LVDS1 connected - (II) intel(0): Output DP1 disconnected - (II) intel(0): Using exact sizes for initial modes - (II) intel(0): Output LVDS1 using initial mode 1366x768 - (II) intel(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated. - (II) intel(0): Kernel page flipping support detected, enabling - (==) intel(0): DPI set to (96, 96) - (II) Loading sub module "fb" - (II) LoadModule: "fb" - (II) Loading /usr/lib/xorg/modules/libfb.so - (II) Module fb: vendor="X.Org Foundation" - compiled for 1.7.6, module version = 1.0.0 - ABI class: X.Org ANSI C Emulation, version 0.4 - (II) UnloadModule: "vesa" - (II) Unloading /usr/lib/xorg/modules/drivers/vesa_drv.so - (II) UnloadModule: "fbdev" - (II) Unloading /usr/lib/xorg/modules/drivers/fbdev_drv.so - (II) UnloadModule: "fbdevhw" - (II) Unloading /usr/lib/xorg/modules/linux/libfbdevhw.so - (==) Depth 24 pixmap format is 32 bpp - (II) intel(0): [DRI2] Setup complete - (**) intel(0): Tiling enabled - (**) intel(0): SwapBuffers wait enabled - (==) intel(0): VideoRam: 262144 KB - (II) intel(0): Attempting memory allocation with tiled buffers. - (II) intel(0): Tiled allocation successful. - (II) UXA(0): Driver registered support for the following operations: - (II) solid - (II) copy - (II) composite (RENDER acceleration) - (II) put_image - (==) intel(0): Backing store disabled - (==) intel(0): Silken mouse enabled - (II) intel(0): Initializing HW Cursor - (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message. - (==) intel(0): DPMS enabled - (==) intel(0): Intel XvMC decoder enabled - (II) intel(0): Set up textured video - (II) intel(0): [XvMC] xvmc_vld driver initialized. - (II) intel(0): direct rendering: DRI2 Enabled - (--) RandR disabled - (II) Initializing built-in extension Generic Event Extension - (II) Initializing built-in extension SHAPE - (II) Initializing built-in extension MIT-SHM - (II) Initializing built-in extension XInputExtension - (II) Initializing built-in extension XTEST - (II) Initializing built-in extension BIG-REQUESTS - (II) Initializing built-in extension SYNC - (II) Initializing built-in extension XKEYBOARD - (II) Initializing built-in extension XC-MISC - (II) Initializing built-in extension SECURITY - (II) Initializing built-in extension XINERAMA - (II) Initializing built-in extension XFIXES - (II) Initializing built-in extension RENDER - (II) Initializing built-in extension RANDR - (II) Initializing built-in extension COMPOSITE - (II) Initializing built-in extension DAMAGE - (II) AIGLX: enabled GLX_MESA_copy_sub_buffer - (II) AIGLX: enabled GLX_SGI_make_current_read - (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control - (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects - (II) AIGLX: Loaded and initialized /usr/lib/dri/i965_dri.so - (II) GLX: Initialized DRI2 GL provider for screen 0 - (II) intel(0): Setting screen physical size to 361 x 203 - (II) XKB: reuse xkmfile /var/lib/xkb/server-B20D7FC79C7F597315E3E501AEF10E0D866E8E92.xkm - (II) config/udev: Adding input device Video Bus (/dev/input/event8) - (**) Video Bus: Applying InputClass "evdev keyboard catchall" - (II) LoadModule: "evdev" - (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so - (II) Module evdev: vendor="X.Org Foundation" - compiled for 1.7.6, module version = 2.3.2 - Module class: X.Org XInput Driver - ABI class: X.Org XInput driver, version 7.0 - (**) Video Bus: always reports core events - (**) Video Bus: Device: "/dev/input/event8" - (II) Video Bus: Found keys - (II) Video Bus: Configuring as keyboard - (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD) - (**) Option "xkb_rules" "evdev" - (**) Option "xkb_model" "pc105" - (**) Option "xkb_layout" "us" - (II) config/udev: Adding input device Video Bus (/dev/input/event9) - (**) Video Bus: Applying InputClass "evdev keyboard catchall" - (**) Video Bus: always reports core events - (**) Video Bus: Device: "/dev/input/event9" - (II) Video Bus: Found keys - (II) Video Bus: Configuring as keyboard - (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD) - (**) Option "xkb_rules" "evdev" - (**) Option "xkb_model" "pc105" - (**) Option "xkb_layout" "us" - (II) config/udev: Adding input device Power Button (/dev/input/event1) - (**) Power Button: Applying InputClass "evdev keyboard catchall" - (**) Power Button: always reports core events - (**) Power Button: Device: "/dev/input/event1" - (II) Power Button: Found keys - (II) Power Button: Configuring as keyboard - (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD) - (**) Option "xkb_rules" "evdev" - (**) Option "xkb_model" "pc105" - (**) Option "xkb_layout" "us" - (II) config/udev: Adding input device Lid Switch (/dev/input/event0) - (II) No input driver/identifier specified (ignoring) - (II) config/udev: Adding input device Sleep Button (/dev/input/event2) - (**) Sleep Button: Applying InputClass "evdev keyboard catchall" - (**) Sleep Button: always reports core events - (**) Sleep Button: Device: "/dev/input/event2" - (II) Sleep Button: Found keys - (II) Sleep Button: Configuring as keyboard - (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD) - (**) Option "xkb_rules" "evdev" - (**) Option "xkb_model" "pc105" - (**) Option "xkb_layout" "us" - (II) config/udev: Adding input device HDA Digital PCBeep (/dev/input/event10) - (II) No input driver/identifier specified (ignoring) - (II) config/udev: Adding input device HDA Intel Mic at Ext Right Jack (/dev/input/event11) - (II) No input driver/identifier specified (ignoring) - (II) config/udev: Adding input device HDA Intel HP Out at Ext Right Jack (/dev/input/event12) - (II) No input driver/identifier specified (ignoring) - (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event4) - (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall" - (**) AT Translated Set 2 keyboard: always reports core events - (**) AT Translated Set 2 keyboard: Device: "/dev/input/event4" - (II) AT Translated Set 2 keyboard: Found keys - (II) AT Translated Set 2 keyboard: Configuring as keyboard - (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD) - (**) Option "xkb_rules" "evdev" - (**) Option "xkb_model" "pc105" - (**) Option "xkb_layout" "us" - (II) config/udev: Adding input device PS/2 Mouse (/dev/input/event6) - (**) PS/2 Mouse: Applying InputClass "evdev pointer catchall" - (**) PS/2 Mouse: always reports core events - (**) PS/2 Mouse: Device: "/dev/input/event6" - (II) PS/2 Mouse: Found 3 mouse buttons - (II) PS/2 Mouse: Found relative axes - (II) PS/2 Mouse: Found x and y relative axes - (II) PS/2 Mouse: Configuring as mouse - (**) PS/2 Mouse: YAxisMapping: buttons 4 and 5 - (**) PS/2 Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200 - (II) XINPUT: Adding extended input device "PS/2 Mouse" (type: MOUSE) - (II) PS/2 Mouse: initialized for relative axes. - (II) config/udev: Adding input device PS/2 Mouse (/dev/input/mouse1) - (II) No input driver/identifier specified (ignoring) - (II) config/udev: Adding input device AlpsPS/2 ALPS GlidePoint (/dev/input/event7) - (**) AlpsPS/2 ALPS GlidePoint: Applying InputClass "evdev pointer catchall" - (**) AlpsPS/2 ALPS GlidePoint: Applying InputClass "evdev touchpad catchall" - (**) AlpsPS/2 ALPS GlidePoint: Applying InputClass "touchpad catchall" - (II) LoadModule: "synaptics" - (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so - (II) Module synaptics: vendor="X.Org Foundation" - compiled for 1.7.6, module version = 1.2.2 - Module class: X.Org XInput Driver - ABI class: X.Org XInput driver, version 7.0 - (II) Synaptics touchpad driver version 1.2.2 - (**) Option "Device" "/dev/input/event7" - (II) AlpsPS/2 ALPS GlidePoint: x-axis range 0 - 1023 - (II) AlpsPS/2 ALPS GlidePoint: y-axis range 0 - 767 - (II) AlpsPS/2 ALPS GlidePoint: pressure range 0 - 127 - (II) AlpsPS/2 ALPS GlidePoint: finger width range 0 - 0 - (II) AlpsPS/2 ALPS GlidePoint: buttons: left right middle - (--) AlpsPS/2 ALPS GlidePoint: touchpad found - (**) AlpsPS/2 ALPS GlidePoint: always reports core events - (II) XINPUT: Adding extended input device "AlpsPS/2 ALPS GlidePoint" (type: TOUCHPAD) - (**) AlpsPS/2 ALPS GlidePoint: (accel) keeping acceleration scheme 1 - (**) AlpsPS/2 ALPS GlidePoint: (accel) acceleration profile 0 - (**) AlpsPS/2 ALPS GlidePoint: (accel) acceleration factor: 2.000 - (**) AlpsPS/2 ALPS GlidePoint: (accel) acceleration threshold: 4 - (--) AlpsPS/2 ALPS GlidePoint: touchpad found - (II) config/udev: Adding input device AlpsPS/2 ALPS GlidePoint (/dev/input/mouse2) - (II) No input driver/identifier specified (ignoring) - (II) config/udev: Adding input device Macintosh mouse button emulation (/dev/input/event3) - (**) Macintosh mouse button emulation: Applying InputClass "evdev pointer catchall" - (**) Macintosh mouse button emulation: always reports core events - (**) Macintosh mouse button emulation: Device: "/dev/input/event3" - (II) Macintosh mouse button emulation: Found 3 mouse buttons - (II) Macintosh mouse button emulation: Found relative axes - (II) Macintosh mouse button emulation: Found x and y relative axes - (II) Macintosh mouse button emulation: Configuring as mouse - (**) Macintosh mouse button emulation: YAxisMapping: buttons 4 and 5 - (**) Macintosh mouse button emulation: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200 - (II) XINPUT: Adding extended input device "Macintosh mouse button emulation" (type: MOUSE) - (II) Macintosh mouse button emulation: initialized for relative axes. - (II) config/udev: Adding input device Macintosh mouse button emulation (/dev/input/mouse0) - (II) No input driver/identifier specified (ignoring) - (II) config/udev: Adding input device Dell WMI hotkeys (/dev/input/event5) - (**) Dell WMI hotkeys: Applying InputClass "evdev keyboard catchall" - (**) Dell WMI hotkeys: always reports core events - (**) Dell WMI hotkeys: Device: "/dev/input/event5" - (II) Dell WMI hotkeys: Found keys - (II) Dell WMI hotkeys: Configuring as keyboard - (II) XINPUT: Adding extended input device "Dell WMI hotkeys" (type: KEYBOARD) - (**) Option "xkb_rules" "evdev" - (**) Option "xkb_model" "pc105" - (**) Option "xkb_layout" "us" - (II) intel(0): EDID vendor "SEC", prod id 21569 - (II) intel(0): Printing DDC gathered Modelines: - (II) intel(0): Modeline "1366x768"x0.0 72.33 1366 1414 1446 1526 768 770 775 790 +hsync -vsync (47.4 kHz) - (II) intel(0): EDID vendor "SEC", prod id 21569 - (II) intel(0): Printing DDC gathered Modelines: - (II) intel(0): Modeline "1366x768"x0.0 72.33 1366 1414 1446 1526 768 770 775 790 +hsync -vsync (47.4 kHz) - (II) intel(0): EDID vendor "SEC", prod id 21569 - (II) intel(0): Printing DDC gathered Modelines: - (II) intel(0): Modeline "1366x768"x0.0 72.33 1366 1414 1446 1526 768 770 775 790 +hsync -vsync (47.4 kHz) - (II) intel(0): EDID vendor "SEC", prod id 21569 - (II) intel(0): Printing DDC gathered Modelines: - (II) intel(0): Modeline "1366x768"x0.0 72.33 1366 1414 1446 1526 768 770 775 790 +hsync -vsync (47.4 kHz) - (II) intel(0): EDID vendor "SEC", prod id 21569 - (II) intel(0): Printing DDC gathered Modelines: - (II) intel(0): Modeline "1366x768"x0.0 72.33 1366 1414 1446 1526 768 770 775 790 +hsync -vsync (47.4 kHz) - (II) intel(0): EDID vendor "SEC", prod id 21569 - (II) intel(0): Printing DDC gathered Modelines: - (II) intel(0): Modeline "1366x768"x0.0 72.33 1366 1414 1446 1526 768 770 775 790 +hsync -vsync (47.4 kHz) - (II) intel(0): EDID vendor "SEC", prod id 21569 - (II) intel(0): Printing DDC gathered Modelines: - (II) intel(0): Modeline "1366x768"x0.0 72.33 1366 1414 1446 1526 768 770 775 790 +hsync -vsync (47.4 kHz) - pe...@peter-laptop:~$ ProblemType: Bug DistroRelease: Ubuntu 10.04 Package: xorg 1:7.5+5ubuntu1 ProcVersionSignature: Ubuntu 2.6.32-22.33-generic 2.6.32.11+drm33.2 Uname: Linux 2.6.32-22-generic x86_64 NonfreeKernelModules: wl Architecture: amd64 Date: Tue May 11 13:18:30 2010 DkmsStatus: - virtualbox-ose, 3.1.6, 2.6.32-22-generic, x86_64: installed - bcmwl, 5.60.48.36+bdcom, 2.6.32-21-generic, x86_64: installed - bcmwl, 5.60.48.36+bdcom, 2.6.32-22-generic, x86_64: installed - virtualbox-ose-guest, 3.1.6, 2.6.32-22-generic, x86_64: installed + virtualbox-ose, 3.1.6, 2.6.32-22-generic, x86_64: installed + bcmwl, 5.60.48.36+bdcom, 2.6.32-21-generic, x86_64: installed + bcmwl, 5.60.48.36+bdcom, 2.6.32-22-generic, x86_64: installed + virtualbox-ose-guest, 3.1.6, 2.6.32-22-generic, x86_64: installed InstallationMedia: Ubuntu 10.04 LTS "Lucid Lynx" - Release amd64 (20100429) MachineType: Dell Inc. Inspiron 1545 ProcCmdLine: BOOT_IMAGE=/boot/vmlinuz-2.6.32-22-generic root=UUID=1aff2380-116e-49c4-8561-6c4e8987bea2 ro quiet splash ProcEnviron: - LANG=en_US.utf8 - SHELL=/bin/bash + LANG=en_US.utf8 + SHELL=/bin/bash SourcePackage: xorg Symptom: display dmi.bios.date: 06/03/2009 dmi.bios.vendor: Dell Inc. dmi.bios.version: A08 dmi.board.name: 0G848F dmi.board.vendor: Dell Inc. dmi.chassis.type: 8 dmi.chassis.vendor: Dell Inc. dmi.modalias: dmi:bvnDellInc.:bvrA08:bd06/03/2009:svnDellInc.:pnInspiron1545:pvr:rvnDellInc.:rn0G848F:rvr:cvnDellInc.:ct8:cvr: dmi.product.name: Inspiron 1545 dmi.sys.vendor: Dell Inc. glxinfo: Error: [Errno 2] No such file or directory system: - distro: Ubuntu - codename: lucid - architecture: x86_64 - kernel: 2.6.32-22-generic + distro: Ubuntu + codename: lucid + architecture: x86_64 + kernel: 2.6.32-22-generic -- [gm45] Screen flickers (Needs i915.powersave=0) https://bugs.launchpad.net/bugs/578899 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs