Did an install of 10.10 beta yesterday and it only finds my PATA drives. My system is based on an inte SE7505VB2 board with a sata_sil controller.
exerpt fro dmesg follows:- [ 1.060080] sata_sil 0000:05:04.0: version 2.4 [ 1.060161] sata_sil 0000:05:04.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19 [ 1.062457] scsi3 : sata_sil [ 1.062806] scsi4 : sata_sil [ 1.062987] ata3: SATA max UDMA/100 mmio m...@0xd8401000 tf 0xd8401080 irq 19 [ 1.062996] ata4: SATA max UDMA/100 mmio m...@0xd8401000 tf 0xd84010c0 irq 19 [ 1.063806] FDC 0 is a post-1991 82077 [ 1.067327] e100: Intel(R) PRO/100 Network Driver, 3.5.24-k2-NAPI [ 1.067332] e100: Copyright(c) 1999-2006 Intel Corporation [ 1.067404] e100 0000:05:03.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 [ 1.092236] e100 0000:05:03.0: PME# disabled [ 1.093455] e100 0000:05:03.0: eth0: addr 0xd8400000, irq 18, MAC addr 00:04:23:88:14:3f [ 1.354552] e1000 0000:04:02.0: eth1: (PCI:66MHz:32-bit) 00:04:23:88:14:d7 [ 1.354567] e1000 0000:04:02.0: eth1: Intel(R) PRO/1000 Network Connection [ 1.385544] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 310) [ 1.385637] ata3.00: NODEV after polling detection [ 1.410618] EXT4-fs (sdb1): mounted filesystem with ordered data mode. Opts: (null) [ 1.708051] ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 310) [ 1.708148] ata4.00: NODEV after polling detection shows the ports are being detected but not the drives on them. -- Sata drives not detected by 2.6.35.* kernels https://bugs.launchpad.net/bugs/595321 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
