Well, I don't think the rfkill status is related to the driver. It is an interaction with the bios as far as I know...
But thanks for your input :) De: "Cypher2" <nathanel.tit...@gmail.com> À: "Daniel Cardin" <daniel.car...@gmail.com> Envoyé: Mardi 12 Octobre 2010 09:31:30 Objet: Re: [Bug 644452] Re: Atheros AR928X not connecting on wireless HP G60-468CA INF category management usually provides pointers on driver modulation... was just an idea. On Tue, Oct 12, 2010 at 8:54 AM, Daniel Cardin <644...@bugs.launchpad.net>wrote: > Why would I do that ? The driver works just fine. I have been using it > all day with wicd. > > It's only the killswitch status that prevents network-manager from doing > its job. If there were > an option to diregard the status, it would work :) > > > De: "Cypher2" <nathanel.tit...@gmail.com> > À: "Daniel Cardin" <daniel.car...@gmail.com> > Envoyé: Mardi 12 Octobre 2010 08:40:06 > Objet: Re: [Bug 644452] Re: Atheros AR928X not connecting on wireless HP > G60-468CA > > Could you verify if ndisgtk/ndiswrapper INF bypass works? Use modprobe to > list active driver module and blacklist it. > On 11 Oct 2010 15:06, "Daniel Cardin" <644...@bugs.launchpad.net> wrote: > > I have a fresh install of 10.10 and I am experimenting the disabled > wireless problem as well. > > But, on my Dell Vostro 1720, I cannot change the state of the rfkill > using > unblock all. It remains blocked. > > > > On the other hand, the wireless IS working as using wicd works just > > fine, where NM fails. > > > > sudo ifconfig eth1 up does not report any error works > > > > dan...@daniel-vostro-1720:~$ rfkill list > > 0: hci0: Bluetooth > > Soft blocked: no > > Hard blocked: no > > 1: dell-wifi: Wireless LAN > > Soft blocked: yes > > Hard blocked: yes > > 2: dell-bluetooth: Bluetooth > > Soft blocked: no > > Hard blocked: no > > > > No change after sudo rfkill unblock all > > > > The chip is a broadcom 4322, but this seems unrelated. Looks like an > > interaction with the BIOS killswitch info. There was a similar bug which > > affected Dell laptops that was raised against Lucid : bug #430809 > > > > -- > > Atheros AR928X not connecting on wireless HP G60-468CA > > https://bugs.launchpad.net/bugs/644452 > > You received this bug notification because you are a direct subscriber > > of the bug. > > > > Status in “linux” package in Ubuntu: New > > > > Bug description: > > Hello, > > > > this bug concerns my HP G60-468CA laptop. Since testing maverick amd64, > the wireless button switch stays orange and refuses to turn blue to > activate, and the wireless acess is greyed out on both gnome and KDE > (Ubuntu > and Kubuntu respectively) running on the latest 2.6.35 kernel. Installing > the latest mainline kernal hangs on boot for all GRUB options (2.6.36-rc4) > and renders sytem unusable. > > > > All terminal configs failed to make this work (lspci and modprobe say > that > ath9k is in use and hardware is running and present... > > > > Lucid lynx worked flawlessly.. I even popped the wireless hatch open to > manually remove the wireless card and verify output again... > > > > Please help! > > > > (It might be a duplicate since the report failed on timeout on my last > attempt to submit) > > > > > > Output: > > > > natha...@solace:~$ lspci -vnvn > > 00:00.0 RAM memory [0500]: nVidia Corporation MCP78S [GeForce 8200] > Memory > Controller [10de:0754] (rev a2) > > Subsystem: Hewlett-Packard Company Device [103c:360a] > > Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- > Stepping- SERR- FastB2B- DisINTx- > > Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- > <MAbort- >SERR- <PERR- INTx- > > Latency: 0 > > Capabilities: <access denied> > > > > 00:01.0 ISA bridge [0601]: nVidia Corporation Device [10de:075e] (rev a2) > > Subsystem: Hewlett-Packard Company Device [103c:360a] > > Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- > Stepping- SERR- FastB2B- DisINTx- > > Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- > <MAbort- >SERR- <PERR- INTx- > > Latency: 0 > > Region 0: I/O ports at 1a00 [size=256] > > > > 00:01.1 SMBus [0c05]: nVidia Corporation MCP78S [GeForce 8200] SMBus > [10de:0752] (rev a1) > > Subsystem: Hewlett-Packard Company Device [103c:360a] > > Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- > Stepping- SERR- FastB2B- DisINTx- > > Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- > <MAbort- >SERR- <PERR- INTx- > > Interrupt: pin A routed to IRQ 10 > > Region 0: I/O ports at 3080 [size=64] > > Region 4: I/O ports at 3040 [size=64] > > Region 5: I/O ports at 3000 [size=64] > > Capabilities: <access denied> > > Kernel driver in use: nForce2_smbus > > Kernel modules: i2c-nforce2 > > > > 00:01.3 Co-processor [0b40]: nVidia Corporation MCP78S [GeForce 8200] > Co-Processor [10de:0753] (rev a2) > > Subsystem: Hewlett-Packard Company Device [103c:360a] > > Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- > Stepping- SERR- FastB2B- DisINTx- > > Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- > <MAbort- >SERR- <PERR- INTx- > > Latency: 0 (750ns min, 250ns max) > > Interrupt: pin B routed to IRQ 11 > > Region 0: Memory at c0080000 (32-bit, non-prefetchable) [size=512K] > > > > 00:01.4 RAM memory [0500]: nVidia Corporation MCP78S [GeForce 8200] > Memory > Controller [10de:0568] (rev a1) > > Subsystem: Hewlett-Packard Company Device [103c:360a] > > Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- > Stepping- SERR- FastB2B- DisINTx+ > > Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- > <MAbort- >SERR- <PERR- INTx- > > > > 00:02.0 USB Controller [0c03]: nVidia Corporation MCP78S [GeForce 8200] > OHCI USB 1.1 Controller [10de:077b] (rev a1) (prog-if 10 [OHCI]) > > Subsystem: Hewlett-Packard Company Device [103c:360a] > > Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- > Stepping- SERR- FastB2B- DisINTx- > > Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- > <MAbort- >SERR- <PERR- INTx- > > Latency: 0 (750ns min, 250ns max) > > Interrupt: pin A routed to IRQ 17 > > Region 0: Memory at c0006000 (32-bit, non-prefetchable) [size=4K] > > Capabilities: <access denied> > > Kernel driver in use: ohci_hcd > > > > 00:02.1 USB Controller [0c03]: nVidia Corporation MCP78S [GeForce 8200] > EHCI USB 2.0 Controller [10de:077c] (rev a1) (prog-if 20 [EHCI]) > > Subsystem: Hewlett-Packard Company Device [103c:360a] > > Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- > Stepping- SERR- FastB2B- DisINTx- > > Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- > <MAbort- >SERR- <PERR- INTx- > > Latency: 0 (750ns min, 250ns max) > > Interrupt: pin B routed to IRQ 17 > > Region 0: Memory at c0007000 (32-bit, non-prefetchable) [size=256] > > Capabilities: <access denied> > > Kernel driver in use: ehci_hcd > > > > 00:04.0 USB Controller [0c03]: nVidia Corporation MCP78S [GeForce 8200] > OHCI USB 1.1 Controller [10de:077d] (rev a1) (prog-if 10 [OHCI]) > > Subsystem: Hewlett-Packard Company Device [103c:360a] > > Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- > Stepping- SERR- FastB2B- DisINTx- > > Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- > <MAbort- >SERR- <PERR- INTx- > > Latency: 0 (750ns min, 250ns max) > > Interrupt: pin A routed to IRQ 16 > > Region 0: Memory at c0008000 (32-bit, non-prefetchable) [size=4K] > > Capabilities: <access denied> > > Kernel driver in use: ohci_hcd > > > > 00:04.1 USB Controller [0c03]: nVidia Corporation MCP78S [GeForce 8200] > EHCI USB 2.0 Controller [10de:077e] (rev a1) (prog-if 20 [EHCI]) > > Subsystem: Hewlett-Packard Company Device [103c:360a] > > Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- > Stepping- SERR- FastB2B- DisINTx- > > Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- > <MAbort- >SERR- <PERR- INTx- > > Latency: 0 (750ns min, 250ns max) > > Interrupt: pin B routed to IRQ 16 > > Region 0: Memory at c0007400 (32-bit, non-prefetchable) [size=256] > > Capabilities: <access denied> > > Kernel driver in use: ehci_hcd > > > > 00:06.0 IDE interface [0101]: nVidia Corporation MCP78S [GeForce 8200] > IDE > [10de:0759] (rev a1) (prog-if 8a [Master SecP PriP]) > > Subsystem: Hewlett-Packard Company Device [103c:360a] > > Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- > Stepping- SERR- FastB2B- DisINTx- > > Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- > <MAbort- >SERR- <PERR- INTx+ > > Latency: 0 (750ns min, 250ns max) > > Region 0: [virtual] Memory at 000001f0 (32-bit, non-prefetchable) > [size=8] > > Region 1: [virtual] Memory at 000003f0 (type 3, non-prefetchable) > [size=1] > > Region 2: [virtual] Memory at 00000170 (32-bit, non-prefetchable) > [size=8] > > Region 3: [virtual] Memory at 00000370 (type 3, non-prefetchable) > [size=1] > > Region 4: I/O ports at 30c0 [size=16] > > Capabilities: <access denied> > > Kernel driver in use: pata_amd > > Kernel modules: pata_amd > > > > 00:07.0 Audio device [0403]: nVidia Corporation > MCP72XE/MCP72P/MCP78U/MCP78S High Definition Audio [10de:0774] (rev a1) > > Subsystem: Hewlett-Packard Company Device [103c:360a] > > Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- > Stepping- SERR- FastB2B- DisINTx- > > Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- > <MAbort- >SERR- <PERR- INTx- > > Latency: 0 (500ns min, 1250ns max) > > Interrupt: pin A routed to IRQ 19 > > Region 0: Memory at c0000000 (32-bit, non-prefetchable) [size=16K] > > Capabilities: <access denied> > > Kernel driver in use: HDA Intel > > Kernel modules: snd-hda-intel > > > > 00:08.0 PCI bridge [0604]: nVidia Corporation MCP78S [GeForce 8200] PCI > Bridge [10de:075a] (rev a1) (prog-if 01 [Subtractive decode]) > > Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- > Stepping- SERR+ FastB2B- DisINTx- > > Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- > <MAbort- >SERR- <PERR- INTx- > > Latency: 0 > > Bus: primary=00, secondary=01, subordinate=01, sec-latency=0 > > Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- > <MAbort+ <SERR- <PERR- > > BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B- > > PriDiscTmr- SecDiscTmr+ DiscTmrStat- DiscTmrSERREn- > > Capabilities: <access denied> > > > > 00:09.0 IDE interface [0101]: nVidia Corporation MCP78S [GeForce 8200] > SATA Controller (non-AHCI mode) [10de:0ad0] (rev a2) (prog-if 85 [Master > SecO PriO]) > > Subsystem: Hewlett-Packard Company Device [103c:360a] > > Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- > Stepping- SERR+ FastB2B- DisINTx+ > > Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- > <MAbort- >SERR- <PERR- INTx- > > Latency: 0 (750ns min, 250ns max) > > Interrupt: pin A routed to IRQ 41 > > Region 0: I/O ports at 30f0 [size=8] > > Region 1: I/O ports at 30e4 [size=4] > > Region 2: I/O ports at 30e8 [size=8] > > Region 3: I/O ports at 30e0 [size=4] > > Region 4: I/O ports at 30d0 [size=16] > > Region 5: Memory at c0004000 (32-bit, non-prefetchable) [size=8K] > > Capabilities: <access denied> > > Kernel driver in use: ahci > > Kernel modules: ahci > > > > 00:0a.0 Ethernet controller [0200]: nVidia Corporation MCP77 Ethernet > [10de:0760] (rev a2) > > Subsystem: Hewlett-Packard Company Device [103c:360a] > > Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- > Stepping- SERR- FastB2B- DisINTx+ > > Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- > <MAbort- >SERR- <PERR- INTx- > > Latency: 0 (250ns min, 5000ns max) > > Interrupt: pin A routed to IRQ 42 > > Region 0: Memory at c0009000 (32-bit, non-prefetchable) [size=4K] > > Region 1: I/O ports at 30f8 [size=8] > > Region 2: Memory at c0007c00 (32-bit, non-prefetchable) [size=256] > > Region 3: Memory at c0007800 (32-bit, non-prefetchable) [size=16] > > Capabilities: <access denied> > > Kernel driver in use: forcedeth > > Kernel modules: forcedeth > > > > 00:0b.0 PCI bridge [0604]: nVidia Corporation MCP78S [GeForce 8200] PCI > Express Bridge [10de:0569] (rev a1) (prog-if 00 [Normal decode]) > > Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- > Stepping- SERR+ FastB2B- DisINTx- > > Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- > <MAbort- >SERR- <PERR- INTx- > > Latency: 0 > > Bus: primary=00, secondary=02, subordinate=02, sec-latency=0 > > I/O behind bridge: 00004000-00004fff > > Memory behind bridge: c1000000-c1ffffff > > Prefetchable memory behind bridge: 00000000c4000000-00000000dfffffff > > Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- > <MAbort- <SERR- <PERR- > > BridgeCtl: Parity- SERR- NoISA+ VGA+ MAbort- >Reset- FastB2B- > > PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- > > Capabilities: <access denied> > > Kernel modules: shpchp > > > > 00:14.0 PCI bridge [0604]: nVidia Corporation MCP78S [GeForce 8200] PCI > Bridge [10de:077a] (rev a1) (prog-if 00 [Normal decode]) > > Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- > Stepping- SERR+ FastB2B- DisINTx+ > > Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- > <MAbort- >SERR- <PERR- INTx- > > Latency: 0 > > Bus: primary=00, secondary=07, subordinate=07, sec-latency=0 > > Memory behind bridge: c2000000-c20fffff > > Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- > <MAbort+ <SERR- <PERR- > > BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B- > > PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- > > Capabilities: <access denied> > > Kernel driver in use: pcieport > > Kernel modules: shpchp > > > > 00:18.0 Host bridge [0600]: Advanced Micro Devices [AMD] Family 11h > Processor HyperTransport Configuration [1022:1300] (rev 40) > > Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- > Stepping- SERR- FastB2B- DisINTx- > > Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- > <MAbort- >SERR- <PERR- INTx- > > Capabilities: <access denied> > > > > 00:18.1 Host bridge [0600]: Advanced Micro Devices [AMD] Family 11h > Processor Address Map [1022:1301] > > Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- > Stepping- SERR- FastB2B- DisINTx- > > Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- > <MAbort- >SERR- <PERR- INTx- > > > > 00:18.2 Host bridge [0600]: Advanced Micro Devices [AMD] Family 11h > Processor DRAM Controller [1022:1302] > > Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- > Stepping- SERR- FastB2B- DisINTx- > > Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- > <MAbort- >SERR- <PERR- INTx- > > Kernel modules: amd64_edac_mod > > > > 00:18.3 Host bridge [0600]: Advanced Micro Devices [AMD] Family 11h > Processor Miscellaneous Control [1022:1303] > > Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- > Stepping- SERR- FastB2B- DisINTx- > > Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- > <MAbort- >SERR- <PERR- INTx- > > Capabilities: <access denied> > > Kernel driver in use: k10temp > > Kernel modules: k10temp > > > > 00:18.4 Host bridge [0600]: Advanced Micro Devices [AMD] Family 11h > Processor Link Control [1022:1304] > > Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- > Stepping- SERR- FastB2B- DisINTx- > > Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- > <MAbort- >SERR- <PERR- INTx- > > > > 02:00.0 VGA compatible controller [0300]: nVidia Corporation C77 [GeForce > 8200M G] [10de:0845] (rev a2) (prog-if 00 [VGA controller]) > > Subsystem: Hewlett-Packard Company Device [103c:360a] > > Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- > Stepping- SERR+ FastB2B- DisINTx- > > Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- > <MAbort- >SERR- <PERR- INTx- > > Latency: 0 > > Interrupt: pin A routed to IRQ 20 > > Region 0: Memory at c1000000 (32-bit, non-prefetchable) [size=16M] > > Region 1: Memory at d0000000 (64-bit, prefetchable) [size=256M] > > Region 3: Memory at c4000000 (64-bit, prefetchable) [size=32M] > > Region 5: I/O ports at 4000 [size=128] > > [virtual] Expansion ROM at c6000000 [disabled] [size=128K] > > Capabilities: <access denied> > > Kernel driver in use: nouveau > > Kernel modules: nouveau, nvidiafb > > > > 07:00.0 Network controller [0280]: Atheros Communications Inc. AR928X > Wireless Network Adapter (PCI-Express) [168c:002a] (rev 01) > > Subsystem: Hewlett-Packard Company Device [103c:1381] > > Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- > Stepping- SERR+ FastB2B- DisINTx- > > Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- > <MAbort- >SERR- <PERR- INTx- > > Latency: 0, Cache Line Size: 64 bytes > > Interrupt: pin A routed to IRQ 23 > > Region 0: Memory at c2000000 (64-bit, non-prefetchable) [size=64K] > > Capabilities: <access denied> > > Kernel driver in use: ath9k > > Kernel modules: ath9k > > > > ProblemType: Bug > > DistroRelease: Ubuntu 10.10 > > Package: linux-image-2.6.35-22-generic 2.6.35-22.33 > > Regression: Yes > > Reproducible: No > > ProcVersionSignature: Ubuntu 2.6.35-22.33-generic 2.6.35.4 > > Uname: Linux 2.6.35-22-generic x86_64 > > AlsaVersion: Advanced Linux Sound Architecture Driver Version 1.0.23. > > Architecture: amd64 > > ArecordDevices: > > **** List of CAPTURE Hardware Devices **** > > card 0: NVidia [HDA NVidia], device 0: CONEXANT Analog [CONEXANT Analog] > > Subdevices: 1/1 > > Subdevice #0: subdevice #0 > > AudioDevicesInUse: > > USER PID ACCESS COMMAND > > /dev/snd/controlC0: ubuntu 4436 F.... pulseaudio > > CRDA: Error: [Errno 2] No such file or directory > > Card0.Amixer.info: > > Card hw:0 'NVidia'/'HDA NVidia at 0xc0000000 irq 19' > > Mixer name : 'Nvidia MCP77/78 HDMI' > > Components : 'HDA:14f15051,103c360a,00100000 > HDA:10de0002,10de0101,00100000' > > Controls : 18 > > Simple ctrls : 8 > > Date: Tue Sep 21 15:08:44 2010 > > Frequency: Once a day. > > LiveMediaBuild: Kubuntu 10.10 "Maverick Meerkat" - Alpha amd64 (20100920) > > MachineType: Hewlett-Packard HP G60 Notebook PC > > ProcCmdLine: noprompt cdrom-detect/try-usb=true > file=/cdrom/preseed/khostname.seed boot=casper maybe-ubiquity > initrd=/casper/initrd.lz quiet splash -- BOOT_IMAGE=/casper/vmlinuz > > ProcEnviron: > > LANGUAGE= > > LANG=en_US.UTF-8 > > SHELL=/bin/bash > > RelatedPackageVersions: linux-firmware 1.38 > > SourcePackage: linux > > dmi.bios.date: 08/18/2009 > > dmi.bios.vendor: Hewlett-Packard > > dmi.bios.version: F.54 > > dmi.board.name: 303C > > dmi.board.vendor: Wistron > > dmi.board.version: 08.60 > > dmi.chassis.type: 10 > > dmi.chassis.vendor: Wistron > > dmi.chassis.version: N/A > > dmi.modalias: > > dmi:bvnHewlett-Packard:bvrF.54:bd08/18/2009:svnHewlett-Packard:pnHPG60NotebookPC:pvrF.54:rvnWistron:rn303C:rvr08.60:cvnWistron:ct10:cvrN/A: > > > dmi.product.name: HP G60 Notebook PC > > dmi.product.version: F.54 > > dmi.sys.vendor: Hewlett-Packard > > > > To unsubscribe from this bug, go to: > > https://bugs.launchpad.net/ubuntu/+source/linux/+bug/644452/+subscribe > > -- > Atheros AR928X not connecting on wireless HP G60-468CA > https://bugs.launchpad.net/bugs/644452 > You received this bug notification because you are a direct subscriber > of the bug. > > -- > Atheros AR928X not connecting on wireless HP G60-468CA > https://bugs.launchpad.net/bugs/644452 > You received this bug notification because you are a direct subscriber > of the bug. > > Status in “linux” package in Ubuntu: New > > Bug description: > Hello, > > this bug concerns my HP G60-468CA laptop. Since testing maverick amd64, the > wireless button switch stays orange and refuses to turn blue to activate, > and the wireless acess is greyed out on both gnome and KDE (Ubuntu and > Kubuntu respectively) running on the latest 2.6.35 kernel. Installing the > latest mainline kernal hangs on boot for all GRUB options (2.6.36-rc4) and > renders sytem unusable. > > All terminal configs failed to make this work (lspci and modprobe say that > ath9k is in use and hardware is running and present... > > Lucid lynx worked flawlessly.. I even popped the wireless hatch open to > manually remove the wireless card and verify output again... > > Please help! > > (It might be a duplicate since the report failed on timeout on my last > attempt to submit) > > > Output: > > natha...@solace:~$ lspci -vnvn > 00:00.0 RAM memory [0500]: nVidia Corporation MCP78S [GeForce 8200] Memory > Controller [10de:0754] (rev a2) > Subsystem: Hewlett-Packard Company Device [103c:360a] > Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- > Stepping- SERR- FastB2B- DisINTx- > Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- > <TAbort- <MAbort- >SERR- <PERR- INTx- > Latency: 0 > Capabilities: <access denied> > > 00:01.0 ISA bridge [0601]: nVidia Corporation Device [10de:075e] (rev a2) > Subsystem: Hewlett-Packard Company Device [103c:360a] > Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- > Stepping- SERR- FastB2B- DisINTx- > Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- > <TAbort- <MAbort- >SERR- <PERR- INTx- > Latency: 0 > Region 0: I/O ports at 1a00 [size=256] > > 00:01.1 SMBus [0c05]: nVidia Corporation MCP78S [GeForce 8200] SMBus > [10de:0752] (rev a1) > Subsystem: Hewlett-Packard Company Device [103c:360a] > Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- > Stepping- SERR- FastB2B- DisINTx- > Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- > <TAbort- <MAbort- >SERR- <PERR- INTx- > Interrupt: pin A routed to IRQ 10 > Region 0: I/O ports at 3080 [size=64] > Region 4: I/O ports at 3040 [size=64] > Region 5: I/O ports at 3000 [size=64] > Capabilities: <access denied> > Kernel driver in use: nForce2_smbus > Kernel modules: i2c-nforce2 > > 00:01.3 Co-processor [0b40]: nVidia Corporation MCP78S [GeForce 8200] > Co-Processor [10de:0753] (rev a2) > Subsystem: Hewlett-Packard Company Device [103c:360a] > Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- > Stepping- SERR- FastB2B- DisINTx- > Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- > <TAbort- <MAbort- >SERR- <PERR- INTx- > Latency: 0 (750ns min, 250ns max) > Interrupt: pin B routed to IRQ 11 > Region 0: Memory at c0080000 (32-bit, non-prefetchable) [size=512K] > > 00:01.4 RAM memory [0500]: nVidia Corporation MCP78S [GeForce 8200] Memory > Controller [10de:0568] (rev a1) > Subsystem: Hewlett-Packard Company Device [103c:360a] > Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- > Stepping- SERR- FastB2B- DisINTx+ > Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- > <TAbort- <MAbort- >SERR- <PERR- INTx- > > 00:02.0 USB Controller [0c03]: nVidia Corporation MCP78S [GeForce 8200] > OHCI USB 1.1 Controller [10de:077b] (rev a1) (prog-if 10 [OHCI]) > Subsystem: Hewlett-Packard Company Device [103c:360a] > Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- > Stepping- SERR- FastB2B- DisINTx- > Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- > <TAbort- <MAbort- >SERR- <PERR- INTx- > Latency: 0 (750ns min, 250ns max) > Interrupt: pin A routed to IRQ 17 > Region 0: Memory at c0006000 (32-bit, non-prefetchable) [size=4K] > Capabilities: <access denied> > Kernel driver in use: ohci_hcd > > 00:02.1 USB Controller [0c03]: nVidia Corporation MCP78S [GeForce 8200] > EHCI USB 2.0 Controller [10de:077c] (rev a1) (prog-if 20 [EHCI]) > Subsystem: Hewlett-Packard Company Device [103c:360a] > Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- > Stepping- SERR- FastB2B- DisINTx- > Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- > <TAbort- <MAbort- >SERR- <PERR- INTx- > Latency: 0 (750ns min, 250ns max) > Interrupt: pin B routed to IRQ 17 > Region 0: Memory at c0007000 (32-bit, non-prefetchable) [size=256] > Capabilities: <access denied> > Kernel driver in use: ehci_hcd > > 00:04.0 USB Controller [0c03]: nVidia Corporation MCP78S [GeForce 8200] > OHCI USB 1.1 Controller [10de:077d] (rev a1) (prog-if 10 [OHCI]) > Subsystem: Hewlett-Packard Company Device [103c:360a] > Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- > Stepping- SERR- FastB2B- DisINTx- > Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- > <TAbort- <MAbort- >SERR- <PERR- INTx- > Latency: 0 (750ns min, 250ns max) > Interrupt: pin A routed to IRQ 16 > Region 0: Memory at c0008000 (32-bit, non-prefetchable) [size=4K] > Capabilities: <access denied> > Kernel driver in use: ohci_hcd > > 00:04.1 USB Controller [0c03]: nVidia Corporation MCP78S [GeForce 8200] > EHCI USB 2.0 Controller [10de:077e] (rev a1) (prog-if 20 [EHCI]) > Subsystem: Hewlett-Packard Company Device [103c:360a] > Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- > Stepping- SERR- FastB2B- DisINTx- > Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- > <TAbort- <MAbort- >SERR- <PERR- INTx- > Latency: 0 (750ns min, 250ns max) > Interrupt: pin B routed to IRQ 16 > Region 0: Memory at c0007400 (32-bit, non-prefetchable) [size=256] > Capabilities: <access denied> > Kernel driver in use: ehci_hcd > > 00:06.0 IDE interface [0101]: nVidia Corporation MCP78S [GeForce 8200] IDE > [10de:0759] (rev a1) (prog-if 8a [Master SecP PriP]) > Subsystem: Hewlett-Packard Company Device [103c:360a] > Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- > Stepping- SERR- FastB2B- DisINTx- > Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- > <TAbort- <MAbort- >SERR- <PERR- INTx+ > Latency: 0 (750ns min, 250ns max) > Region 0: [virtual] Memory at 000001f0 (32-bit, non-prefetchable) > [size=8] > Region 1: [virtual] Memory at 000003f0 (type 3, non-prefetchable) > [size=1] > Region 2: [virtual] Memory at 00000170 (32-bit, non-prefetchable) > [size=8] > Region 3: [virtual] Memory at 00000370 (type 3, non-prefetchable) > [size=1] > Region 4: I/O ports at 30c0 [size=16] > Capabilities: <access denied> > Kernel driver in use: pata_amd > Kernel modules: pata_amd > > 00:07.0 Audio device [0403]: nVidia Corporation > MCP72XE/MCP72P/MCP78U/MCP78S High Definition Audio [10de:0774] (rev a1) > Subsystem: Hewlett-Packard Company Device [103c:360a] > Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- > Stepping- SERR- FastB2B- DisINTx- > Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- > <TAbort- <MAbort- >SERR- <PERR- INTx- > Latency: 0 (500ns min, 1250ns max) > Interrupt: pin A routed to IRQ 19 > Region 0: Memory at c0000000 (32-bit, non-prefetchable) [size=16K] > Capabilities: <access denied> > Kernel driver in use: HDA Intel > Kernel modules: snd-hda-intel > > 00:08.0 PCI bridge [0604]: nVidia Corporation MCP78S [GeForce 8200] PCI > Bridge [10de:075a] (rev a1) (prog-if 01 [Subtractive decode]) > Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- > Stepping- SERR+ FastB2B- DisINTx- > Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- > <TAbort- <MAbort- >SERR- <PERR- INTx- > Latency: 0 > Bus: primary=00, secondary=01, subordinate=01, sec-latency=0 > Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- > <TAbort- <MAbort+ <SERR- <PERR- > BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B- > PriDiscTmr- SecDiscTmr+ DiscTmrStat- DiscTmrSERREn- > Capabilities: <access denied> > > 00:09.0 IDE interface [0101]: nVidia Corporation MCP78S [GeForce 8200] SATA > Controller (non-AHCI mode) [10de:0ad0] (rev a2) (prog-if 85 [Master SecO > PriO]) > Subsystem: Hewlett-Packard Company Device [103c:360a] > Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- > Stepping- SERR+ FastB2B- DisINTx+ > Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- > <TAbort- <MAbort- >SERR- <PERR- INTx- > Latency: 0 (750ns min, 250ns max) > Interrupt: pin A routed to IRQ 41 > Region 0: I/O ports at 30f0 [size=8] > Region 1: I/O ports at 30e4 [size=4] > Region 2: I/O ports at 30e8 [size=8] > Region 3: I/O ports at 30e0 [size=4] > Region 4: I/O ports at 30d0 [size=16] > Region 5: Memory at c0004000 (32-bit, non-prefetchable) [size=8K] > Capabilities: <access denied> > Kernel driver in use: ahci > Kernel modules: ahci > > 00:0a.0 Ethernet controller [0200]: nVidia Corporation MCP77 Ethernet > [10de:0760] (rev a2) > Subsystem: Hewlett-Packard Company Device [103c:360a] > Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- > Stepping- SERR- FastB2B- DisINTx+ > Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- > <TAbort- <MAbort- >SERR- <PERR- INTx- > Latency: 0 (250ns min, 5000ns max) > Interrupt: pin A routed to IRQ 42 > Region 0: Memory at c0009000 (32-bit, non-prefetchable) [size=4K] > Region 1: I/O ports at 30f8 [size=8] > Region 2: Memory at c0007c00 (32-bit, non-prefetchable) [size=256] > Region 3: Memory at c0007800 (32-bit, non-prefetchable) [size=16] > Capabilities: <access denied> > Kernel driver in use: forcedeth > Kernel modules: forcedeth > > 00:0b.0 PCI bridge [0604]: nVidia Corporation MCP78S [GeForce 8200] PCI > Express Bridge [10de:0569] (rev a1) (prog-if 00 [Normal decode]) > Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- > Stepping- SERR+ FastB2B- DisINTx- > Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- > <TAbort- <MAbort- >SERR- <PERR- INTx- > Latency: 0 > Bus: primary=00, secondary=02, subordinate=02, sec-latency=0 > I/O behind bridge: 00004000-00004fff > Memory behind bridge: c1000000-c1ffffff > Prefetchable memory behind bridge: 00000000c4000000-00000000dfffffff > Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- > <TAbort- <MAbort- <SERR- <PERR- > BridgeCtl: Parity- SERR- NoISA+ VGA+ MAbort- >Reset- FastB2B- > PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- > Capabilities: <access denied> > Kernel modules: shpchp > > 00:14.0 PCI bridge [0604]: nVidia Corporation MCP78S [GeForce 8200] PCI > Bridge [10de:077a] (rev a1) (prog-if 00 [Normal decode]) > Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- > Stepping- SERR+ FastB2B- DisINTx+ > Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- > <TAbort- <MAbort- >SERR- <PERR- INTx- > Latency: 0 > Bus: primary=00, secondary=07, subordinate=07, sec-latency=0 > Memory behind bridge: c2000000-c20fffff > Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- > <TAbort- <MAbort+ <SERR- <PERR- > BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B- > PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- > Capabilities: <access denied> > Kernel driver in use: pcieport > Kernel modules: shpchp > > 00:18.0 Host bridge [0600]: Advanced Micro Devices [AMD] Family 11h > Processor HyperTransport Configuration [1022:1300] (rev 40) > Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- > Stepping- SERR- FastB2B- DisINTx- > Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- > <TAbort- <MAbort- >SERR- <PERR- INTx- > Capabilities: <access denied> > > 00:18.1 Host bridge [0600]: Advanced Micro Devices [AMD] Family 11h > Processor Address Map [1022:1301] > Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- > Stepping- SERR- FastB2B- DisINTx- > Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- > <TAbort- <MAbort- >SERR- <PERR- INTx- > > 00:18.2 Host bridge [0600]: Advanced Micro Devices [AMD] Family 11h > Processor DRAM Controller [1022:1302] > Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- > Stepping- SERR- FastB2B- DisINTx- > Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- > <TAbort- <MAbort- >SERR- <PERR- INTx- > Kernel modules: amd64_edac_mod > > 00:18.3 Host bridge [0600]: Advanced Micro Devices [AMD] Family 11h > Processor Miscellaneous Control [1022:1303] > Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- > Stepping- SERR- FastB2B- DisINTx- > Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- > <TAbort- <MAbort- >SERR- <PERR- INTx- > Capabilities: <access denied> > Kernel driver in use: k10temp > Kernel modules: k10temp > > 00:18.4 Host bridge [0600]: Advanced Micro Devices [AMD] Family 11h > Processor Link Control [1022:1304] > Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- > Stepping- SERR- FastB2B- DisINTx- > Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- > <TAbort- <MAbort- >SERR- <PERR- INTx- > > 02:00.0 VGA compatible controller [0300]: nVidia Corporation C77 [GeForce > 8200M G] [10de:0845] (rev a2) (prog-if 00 [VGA controller]) > Subsystem: Hewlett-Packard Company Device [103c:360a] > Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- > Stepping- SERR+ FastB2B- DisINTx- > Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- > <TAbort- <MAbort- >SERR- <PERR- INTx- > Latency: 0 > Interrupt: pin A routed to IRQ 20 > Region 0: Memory at c1000000 (32-bit, non-prefetchable) [size=16M] > Region 1: Memory at d0000000 (64-bit, prefetchable) [size=256M] > Region 3: Memory at c4000000 (64-bit, prefetchable) [size=32M] > Region 5: I/O ports at 4000 [size=128] > [virtual] Expansion ROM at c6000000 [disabled] [size=128K] > Capabilities: <access denied> > Kernel driver in use: nouveau > Kernel modules: nouveau, nvidiafb > > 07:00.0 Network controller [0280]: Atheros Communications Inc. AR928X > Wireless Network Adapter (PCI-Express) [168c:002a] (rev 01) > Subsystem: Hewlett-Packard Company Device [103c:1381] > Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- > Stepping- SERR+ FastB2B- DisINTx- > Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- > <TAbort- <MAbort- >SERR- <PERR- INTx- > Latency: 0, Cache Line Size: 64 bytes > Interrupt: pin A routed to IRQ 23 > Region 0: Memory at c2000000 (64-bit, non-prefetchable) [size=64K] > Capabilities: <access denied> > Kernel driver in use: ath9k > Kernel modules: ath9k > > ProblemType: Bug > DistroRelease: Ubuntu 10.10 > Package: linux-image-2.6.35-22-generic 2.6.35-22.33 > Regression: Yes > Reproducible: No > ProcVersionSignature: Ubuntu 2.6.35-22.33-generic 2.6.35.4 > Uname: Linux 2.6.35-22-generic x86_64 > AlsaVersion: Advanced Linux Sound Architecture Driver Version 1.0.23. > Architecture: amd64 > ArecordDevices: > **** List of CAPTURE Hardware Devices **** > card 0: NVidia [HDA NVidia], device 0: CONEXANT Analog [CONEXANT Analog] > Subdevices: 1/1 > Subdevice #0: subdevice #0 > AudioDevicesInUse: > USER PID ACCESS COMMAND > /dev/snd/controlC0: ubuntu 4436 F.... pulseaudio > CRDA: Error: [Errno 2] No such file or directory > Card0.Amixer.info: > Card hw:0 'NVidia'/'HDA NVidia at 0xc0000000 irq 19' > Mixer name : 'Nvidia MCP77/78 HDMI' > Components : 'HDA:14f15051,103c360a,00100000 > HDA:10de0002,10de0101,00100000' > Controls : 18 > Simple ctrls : 8 > Date: Tue Sep 21 15:08:44 2010 > Frequency: Once a day. > LiveMediaBuild: Kubuntu 10.10 "Maverick Meerkat" - Alpha amd64 (20100920) > MachineType: Hewlett-Packard HP G60 Notebook PC > ProcCmdLine: noprompt cdrom-detect/try-usb=true > file=/cdrom/preseed/khostname.seed boot=casper maybe-ubiquity > initrd=/casper/initrd.lz quiet splash -- BOOT_IMAGE=/casper/vmlinuz > ProcEnviron: > LANGUAGE= > LANG=en_US.UTF-8 > SHELL=/bin/bash > RelatedPackageVersions: linux-firmware 1.38 > SourcePackage: linux > dmi.bios.date: 08/18/2009 > dmi.bios.vendor: Hewlett-Packard > dmi.bios.version: F.54 > dmi.board.name: 303C > dmi.board.vendor: Wistron > dmi.board.version: 08.60 > dmi.chassis.type: 10 > dmi.chassis.vendor: Wistron > dmi.chassis.version: N/A > dmi.modalias: > dmi:bvnHewlett-Packard:bvrF.54:bd08/18/2009:svnHewlett-Packard:pnHPG60NotebookPC:pvrF.54:rvnWistron:rn303C:rvr08.60:cvnWistron:ct10:cvrN/A: > > dmi.product.name: HP G60 Notebook PC > dmi.product.version: F.54 > dmi.sys.vendor: Hewlett-Packard > > To unsubscribe from this bug, go to: > https://bugs.launchpad.net/ubuntu/+source/linux/+bug/644452/+subscribe > -- Atheros AR928X not connecting on wireless HP G60-468CA https://bugs.launchpad.net/bugs/644452 You received this bug notification because you are a direct subscriber of the bug. -- Atheros AR928X not connecting on wireless HP G60-468CA https://bugs.launchpad.net/bugs/644452 You received this bug notification because you are a member of Ubuntu Bugs, which is a direct subscriber. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
