** Description changed: I got a Dell E6410 with a built in SD-Card reader. This reader doesn't work on my current up to date Ubuntu 10.10 $lspci -v: 03:00.0 SD Host controller: Ricoh Co Ltd Device e822 (rev 03) (prog-if 01) - Subsystem: Dell Device 040a - Flags: bus master, fast devsel, latency 0, IRQ 19 - Memory at f2c40000 (32-bit, non-prefetchable) [size=256] - Capabilities: <access denied> - Kernel driver in use: sdhci-pci - Kernel modules: sdhci-pci + Subsystem: Dell Device 040a + Flags: bus master, fast devsel, latency 0, IRQ 19 + Memory at f2c40000 (32-bit, non-prefetchable) [size=256] + Capabilities: <access denied> + Kernel driver in use: sdhci-pci + Kernel modules: sdhci-pci $dmesg (after loading sdhci-pci): [14104.426847] sdhci-pci 0000:03:00.0: PCI INT B disabled [14115.662665] sdhci: Secure Digital Host Controller Interface driver [14115.662671] sdhci: Copyright(c) Pierre Ossman [14115.665815] sdhci-pci 0000:03:00.0: SDHCI controller found [1180:e822] (rev 3) [14115.665858] sdhci-pci 0000:03:00.0: PCI INT B -> GSI 19 (level, low) -> IRQ 19 [14115.667392] mmc0: Unknown controller version (2). You may experience problems. [14115.667442] sdhci-pci 0000:03:00.0: setting latency timer to 64 [14115.667759] Registered led device: mmc0:: [14115.667989] mmc0: SDHCI controller on PCI [0000:03:00.0] using ADMA - $dmesg (after plugging in a card) [14150.560629] mmc0: ADMA error [14150.562689] mmc0: Got data interrupt 0x02100000 even though no data operation was in progress. [14150.562694] sdhci: ============== REGISTER DUMP ============== [14150.562702] sdhci: Sys addr: 0x00000000 | Version: 0x00000402 [14150.562709] sdhci: Blk size: 0x00007008 | Blk cnt: 0x00000001 [14150.562717] sdhci: Argument: 0x00000000 | Trn mode: 0x00000013 [14150.562724] sdhci: Present: 0x01ff0000 | Host ctl: 0x00000011 [14150.562731] sdhci: Power: 0x0000000f | Blk gap: 0x00000000 [14150.562738] sdhci: Wake-up: 0x00000000 | Clock: 0x00004007 [14150.562745] sdhci: Timeout: 0x0000000a | Int stat: 0x00000000 [14150.562752] sdhci: Int enab: 0x02ff00cb | Sig enab: 0x02ff00cb [14150.562759] sdhci: AC12 err: 0x00000000 | Slot int: 0x00000000 [14150.562767] sdhci: Caps: 0x21e832b2 | Max curr: 0x00000040 [14150.562774] sdhci: ADMA Err: 0x00000001 | ADMA Ptr: 0xae09d018 [14150.562776] sdhci: =========================================== [14150.563805] mmc0: error -5 whilst initialising SD card $uname -a Linux USSKelvin 2.6.35-22-generic #34-Ubuntu SMP Sun Oct 10 09:26:05 UTC 2010 x86_64 GNU/Linux
** Tags removed: needs-upstream-testing -- Ricoh e822 SD-Card reader doesn't work https://bugs.launchpad.net/bugs/660088 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs