** Description changed: + **** Fixed with 2.6.37-rc3 kernel ***** + Description: Ubuntu 10.10 Release: 10.10 - I have been using a Verbatim 32GB SSD ExpressCard that is attached via PCIe as a IDE drive. - The card works out of the box in lucid but in maverick dmesg just throws a stack trace. + I have been using a Verbatim 32GB SSD ExpressCard that is attached via PCIe as a IDE drive.The card works out of the box in lucid but in maverick dmesg just throws a stack trace. Shutdown and reboot are blocked until the card is removed. The card needs the "phison" module. Ubuntu lucid amd64 (good) [ 23.003156] pciehp 0000:00:1c.3:pcie04: Card present on Slot(3) [ 23.130232] pci 0000:05:00.0: reg 10 io port: [0x00-0x07] [ 23.130265] pci 0000:05:00.0: reg 14 io port: [0x00-0x03] [ 23.130291] pci 0000:05:00.0: reg 18 io port: [0x00-0x07] [ 23.130317] pci 0000:05:00.0: reg 1c io port: [0x00-0x03] [ 23.130343] pci 0000:05:00.0: reg 20 io port: [0x00-0x0f] [ 23.130603] pci 0000:05:00.0: no hotplug settings from platform [ 23.130778] pata_acpi 0000:05:00.0: enabling device (0000 -> 0001) [ 23.130790] pata_acpi 0000:05:00.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19 [ 23.130847] pata_acpi 0000:05:00.0: setting latency timer to 64 [ 23.130875] pata_acpi 0000:05:00.0: PCI INT A disabled [ 23.137678] phison: module is from the staging directory, the quality is unknown, you have been warned. [ 23.138392] phison_e-box 0000:05:00.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19 [ 23.138445] phison_e-box 0000:05:00.0: setting latency timer to 64 [ 23.138920] scsi4 : phison_e-box [ 23.139000] scsi5 : phison_e-box [ 23.139033] ata5: PATA max UDMA/100 cmd 0x2010 ctl 0x2020 bmdma 0x2000 irq 19 [ 23.139035] ata6: PATA max UDMA/100 cmd 0x2018 ctl 0x2024 bmdma 0x2008 irq 19 [ 23.970550] ata5.00: ATA-7: ExpressCard SSD, PER1.36, max UDMA/133 - [ 23.970553] ata5.00: 62881792 sectors, multi 0: LBA + [ 23.970553] ata5.00: 62881792 sectors, multi 0: LBA [ 23.990561] ata5.00: configured for UDMA/100 [ 23.990664] scsi 4:0:0:0: Direct-Access ATA ExpressCard SSD PER1 PQ: 0 ANSI: 5 [ 23.990816] sd 4:0:0:0: Attached scsi generic sg2 type 0 [ 23.990918] sd 4:0:0:0: [sdb] 62881792 512-byte logical blocks: (32.1 GB/29.9 GiB) [ 23.990955] sd 4:0:0:0: [sdb] Write Protect is off [ 23.990957] sd 4:0:0:0: [sdb] Mode Sense: 00 3a 00 00 [ 23.990976] sd 4:0:0:0: [sdb] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA [ 23.991087] sdb: sdb1 [ 23.992355] sd 4:0:0:0: [sdb] Attached SCSI disk Then the partitions can be mounted - all fine, With maverick the output is rather long, the dmesg paste can be found here: http://pastebin.com/gZXyF6FN Seems to be a regression? :-/
-- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/669343 Title: [staging] phison Module broken: ExpressCard SSD not usable -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
