Hi,

All-in-all i have been able to find my Gobi 2000 device on my Ubuntu 10.10, 
Network Manager only 3 times.
(the first time as a GSM device, the second as a CDMA device and third as a GSM 
device again.)

ever since i am just not able to get it running ...

When i try to run the following command ...

"sudo /lib/udev/gobi_loader /dev/ttyUSB0 /lib/firmware/gobi"
or
"sudo /lib/udev/gobi_loader -2000 /dev/ttyUSB0 /lib/firmware/gobi"

the terminal hangs...

Could this be because the modem manager may be preventing the gobi_loader from 
loading the firmware ?
Or
Could it be because the patch (usb-wwan-2.6.34.diff from - 
http://www.codon.org.uk/~mjg59/gobi_loader/) spoken about in Viktors Petrov's 
post 14 was not added ?
" 
https://bugs.launchpad.net/ubuntu/maverick/+source/linux/+bug/554099/comments/14
 " 


Detail of My Machine :
----------------------

Acer Aspire One 8.9
hosting a 'HP Qualcomm Gobi 2000 card'
with no luck on Windows 7 with this card, i am trying to have it running on my 
Ubuntu.

I am using Ubuntu : 10.10
on kernel : 2.6.35-24-generic


I have uninstalled 'gobi_loader' as well as 'qcserial' completely

I did the following...


1. firmware files : 3 firmware files copied to /lib/firmware/gobi/              
Checked

2. Gobi_loader :        60-gobi-rules file carries my device ID's               
Checked
                        downloaded-extracted-make-make install-

3. qcserial :           qcserial.c file carries my device ID's                  
Checked
                        downloaded-extracted-make-make install-


post installation i verified the installation ... 

1. 'gobi_loader' executable installed to location ...           -       
/lib/udev/...
2. '60-gobi-rules' file installed to location ...               -       
/etc/udev/rules.d/...
3. 'qcserial.ko' installed to location ...                      -       
/lib/modules/.../kernel/drivers/usb/serial...


the command 'lsmod' shows the following activity ...
"
qcserial                            2620  1 
bluetooth                         50500  9 rfcomm,sco,bnep,l2cap,btusb
snd_seq_device              5744  3 snd_seq_midi,snd_rawmidi,snd_seq
psmouse                          59033  0 
usbserial                          33100  3 qcserial
"


command 'dmesg' shows the following activity ...
"
[   13.955839] USB Serial support registered for Qualcomm USB modem
[   13.960673] qcserial 1-6:1.1: Qualcomm USB modem converter detected
[   13.961281] usb 1-6: Qualcomm USB modem converter now attached to ttyUSB0
[   13.961485] usbcore: registered new interface driver qcserial
"

Please let me know what i should try...

to apply the patch ' usb-wwan-2.6.34.diff ' or a different direction all
together...

PS : I am not a programmer just a brave novice ubuntu user :).
So any instructions bearing this fact in mind would be most helpful.

thanks
Muzafsh.

-- 
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/554099

Title:
  Qualcomm Gobi 2000 3G (gobi_loader/qcserial) broken

-- 
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs

Reply via email to