Headphones don't work for me it seems. :/

tail -2 /proc/asound/oss/sndstat
Mixers:
0: Analog Devices AD1986A

amixer
Simple mixer control 'Headphone',0
  Capabilities: pvolume pswitch
  Playback channels: Front Left - Front Right
  Limits: Playback 0 - 31
  Mono:
  Front Left: Playback 24 [77%] [-10.50dB] [on]
  Front Right: Playback 24 [77%] [-10.50dB] [on]
Simple mixer control 'PCM',0
  Capabilities: pvolume pswitch
  Playback channels: Front Left - Front Right
  Limits: Playback 0 - 31
  Mono:
  Front Left: Playback 26 [84%] [4.50dB] [on]
  Front Right: Playback 26 [84%] [4.50dB] [on]
Simple mixer control 'Front',0
  Capabilities: pvolume pswitch
  Playback channels: Front Left - Front Right
  Limits: Playback 0 - 31
  Mono:
  Front Left: Playback 23 [74%] [-12.00dB] [on]
  Front Right: Playback 23 [74%] [-12.00dB] [on]
Simple mixer control 'Surround',0
  Capabilities: pvolume pswitch
  Playback channels: Front Left - Front Right
  Limits: Playback 0 - 31
  Mono:
  Front Left: Playback 0 [0%] [-46.50dB] [off]
  Front Right: Playback 0 [0%] [-46.50dB] [off]
Simple mixer control 'Center',0
  Capabilities: pvolume pvolume-joined pswitch pswitch-joined
  Playback channels: Mono
  Limits: Playback 0 - 31
  Mono: Playback 0 [0%] [-46.50dB] [off]
Simple mixer control 'LFE',0
  Capabilities: pvolume pvolume-joined pswitch pswitch-joined
  Playback channels: Mono
  Limits: Playback 0 - 31
  Mono: Playback 0 [0%] [-46.50dB] [off]
Simple mixer control 'Line',0
  Capabilities: pvolume pswitch cswitch cswitch-joined cswitch-exclusive
  Capture exclusive group: 0
  Playback channels: Front Left - Front Right
  Capture channels: Mono
  Limits: Playback 0 - 31
  Mono: Capture [off]
  Front Left: Playback 0 [0%] [-34.50dB] [off]
  Front Right: Playback 0 [0%] [-34.50dB] [off]
Simple mixer control 'CD',0
  Capabilities: pvolume pswitch cswitch cswitch-joined cswitch-exclusive
  Capture exclusive group: 0
  Playback channels: Front Left - Front Right
  Capture channels: Mono
  Limits: Playback 0 - 31
  Mono: Capture [off]
  Front Left: Playback 25 [81%] [3.00dB] [on]
  Front Right: Playback 25 [81%] [3.00dB] [on]
Simple mixer control 'Mic',0
  Capabilities: pvolume pswitch cswitch cswitch-joined cswitch-exclusive
  Capture exclusive group: 0
  Playback channels: Front Left - Front Right
  Capture channels: Mono
  Limits: Playback 0 - 31
  Mono: Capture [on]
  Front Left: Playback 0 [0%] [-34.50dB] [off]
  Front Right: Playback 0 [0%] [-34.50dB] [off]
Simple mixer control 'Mic Boost',0
  Capabilities: volume
  Playback channels: Front Left - Front Right
  Capture channels: Front Left - Front Right
  Limits: 0 - 3
  Front Left: 9 [300%]
  Front Right: 9 [300%]
Simple mixer control 'Phone',0
  Capabilities: cswitch cswitch-joined cswitch-exclusive
  Capture exclusive group: 0
  Capture channels: Mono
  Mono: Capture [off]
Simple mixer control 'IEC958',0
  Capabilities: pswitch pswitch-joined
  Playback channels: Mono
  Mono: Playback [off]
Simple mixer control 'PC Speaker',0
  Capabilities: pvolume pswitch
  Playback channels: Front Left - Front Right
  Limits: Playback 0 - 15
  Mono:
  Front Left: Playback 9 [60%] [-18.00dB] [on]
  Front Right: Playback 9 [60%] [-18.00dB] [on]
Simple mixer control 'Aux',0
  Capabilities: pvolume pswitch cswitch cswitch-joined cswitch-exclusive
  Capture exclusive group: 0
  Playback channels: Front Left - Front Right
  Capture channels: Mono
  Limits: Playback 0 - 31
  Mono: Capture [off]
  Front Left: Playback 0 [0%] [-34.50dB] [off]
  Front Right: Playback 0 [0%] [-34.50dB] [off]
Simple mixer control 'Mono',0
  Capabilities: pvolume pswitch cswitch cswitch-joined cswitch-exclusive
  Capture exclusive group: 0
  Playback channels: Front Left - Front Right
  Capture channels: Mono
  Limits: Playback 0 - 31
  Mono: Capture [off]
  Front Left: Playback 0 [0%] [-46.50dB] [off]
  Front Right: Playback 0 [0%] [-46.50dB] [off]
Simple mixer control 'Capture',0
  Capabilities: cvolume cswitch
  Capture channels: Front Left - Front Right
  Limits: Capture 0 - 15
  Front Left: Capture 9 [60%] [13.50dB] [off]
  Front Right: Capture 9 [60%] [13.50dB] [off]
Simple mixer control 'Mix',0
  Capabilities: cswitch cswitch-joined cswitch-exclusive
  Capture exclusive group: 0
  Capture channels: Mono
  Mono: Capture [off]
Simple mixer control 'Caller ID',0
  Capabilities: pswitch pswitch-joined
  Playback channels: Mono
  Mono: Playback [off]
Simple mixer control 'Off-hook',0
  Capabilities: pswitch pswitch-joined
  Playback channels: Mono
  Mono: Playback [off]
Simple mixer control 'Stereo Downmix',0
  Capabilities: pswitch
  Playback channels: Front Left - Front Right
  Mono:
  Front Left: Playback [off]
  Front Right: Playback [off]

sudo lspci -nv
00:00.0 0600: 8086:27a0 (rev 03)
        Subsystem: 1631:c022
        Flags: bus master, fast devsel, latency 0
        Capabilities: [e0] Vendor Specific Information

00:01.0 0604: 8086:27a1 (rev 03) (prog-if 00 [Normal decode])
        Flags: bus master, fast devsel, latency 0
        Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
        Memory behind bridge: fa000000-fe0fffff
        Prefetchable memory behind bridge: 00000000bdf00000-00000000ddefffff
        Capabilities: [88] Subsystem: 8086:27a1
        Capabilities: [80] Power Management version 2
        Capabilities: [90] Message Signalled Interrupts: Mask- 64bit- Queue=0/0 
Enable-
        Capabilities: [a0] Express Root Port (Slot+) IRQ 0

00:1b.0 0403: 8086:27d8 (rev 02)
        Subsystem: 1631:c022
        Flags: bus master, fast devsel, latency 0, IRQ 22
        Memory at febfc000 (64-bit, non-prefetchable) [size=16K]
        Capabilities: [50] Power Management version 2
        Capabilities: [60] Message Signalled Interrupts: Mask- 64bit+ Queue=0/0 
Enable-
        Capabilities: [70] Express Unknown type IRQ 0

00:1c.0 0604: 8086:27d0 (rev 02) (prog-if 00 [Normal decode])
        Flags: bus master, fast devsel, latency 0
        Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
        Capabilities: [40] Express Root Port (Slot+) IRQ 0
        Capabilities: [80] Message Signalled Interrupts: Mask- 64bit- Queue=0/0 
Enable-
        Capabilities: [90] Subsystem: 8086:27d0
        Capabilities: [a0] Power Management version 2

00:1c.1 0604: 8086:27d2 (rev 02) (prog-if 00 [Normal decode])
        Flags: bus master, fast devsel, latency 0
        Bus: primary=00, secondary=03, subordinate=03, sec-latency=0
        Memory behind bridge: fe100000-fe1fffff
        Capabilities: [40] Express Root Port (Slot+) IRQ 0
        Capabilities: [80] Message Signalled Interrupts: Mask- 64bit- Queue=0/0 
Enable-
        Capabilities: [90] Subsystem: 8086:27d2
        Capabilities: [a0] Power Management version 2

00:1c.2 0604: 8086:27d4 (rev 02) (prog-if 00 [Normal decode])
        Flags: bus master, fast devsel, latency 0
        Bus: primary=00, secondary=04, subordinate=05, sec-latency=0
        Capabilities: [40] Express Root Port (Slot+) IRQ 0
        Capabilities: [80] Message Signalled Interrupts: Mask- 64bit- Queue=0/0 
Enable-
        Capabilities: [90] Subsystem: 8086:27d4
        Capabilities: [a0] Power Management version 2

00:1d.0 0c03: 8086:27c8 (rev 02) (prog-if 00 [UHCI])
        Subsystem: 1631:c022
        Flags: bus master, medium devsel, latency 0, IRQ 19
        I/O ports at ec00 [size=32]

00:1d.1 0c03: 8086:27c9 (rev 02) (prog-if 00 [UHCI])
        Subsystem: 1631:c022
        Flags: bus master, medium devsel, latency 0, IRQ 20
        I/O ports at e880 [size=32]

00:1d.2 0c03: 8086:27ca (rev 02) (prog-if 00 [UHCI])
        Subsystem: 1631:c022
        Flags: bus master, medium devsel, latency 0, IRQ 18
        I/O ports at e800 [size=32]

00:1d.3 0c03: 8086:27cb (rev 02) (prog-if 00 [UHCI])
        Subsystem: 1631:c022
        Flags: bus master, medium devsel, latency 0, IRQ 21
        I/O ports at e480 [size=32]

00:1d.7 0c03: 8086:27cc (rev 02) (prog-if 20 [EHCI])
        Subsystem: 1631:c022
        Flags: bus master, medium devsel, latency 0, IRQ 19
        Memory at febfbc00 (32-bit, non-prefetchable) [size=1K]
        Capabilities: [50] Power Management version 2
        Capabilities: [58] Debug port

00:1e.0 0604: 8086:2448 (rev e2) (prog-if 01 [Subtractive decode])
        Flags: bus master, fast devsel, latency 0
        Bus: primary=00, secondary=06, subordinate=06, sec-latency=32
        I/O behind bridge: 0000d000-0000dfff
        Memory behind bridge: fea00000-feafffff
        Capabilities: [50] Subsystem: 8086:2448

00:1f.0 0601: 8086:27b9 (rev 02)
        Subsystem: 8086:27b9
        Flags: bus master, medium devsel, latency 0
        Capabilities: [e0] Vendor Specific Information

00:1f.1 0101: 8086:27df (rev 02) (prog-if 8a [Master SecP PriP])
        Subsystem: 1631:c022
        Flags: bus master, medium devsel, latency 0, IRQ 18
        I/O ports at 01f0 [size=8]
        I/O ports at 03f4 [size=1]
        I/O ports at 0170 [size=8]
        I/O ports at 0374 [size=1]
        I/O ports at ffa0 [size=16]

01:00.0 0300: 10de:01d7 (rev a1) (prog-if 00 [VGA])
        Subsystem: 1631:c022
        Flags: bus master, fast devsel, latency 0, IRQ 16
        Memory at fd000000 (32-bit, non-prefetchable) [size=16M]
        Memory at c0000000 (64-bit, prefetchable) [size=256M]
        Memory at fc000000 (64-bit, non-prefetchable) [size=16M]
        [virtual] Expansion ROM at fe0e0000 [disabled] [size=128K]
        Capabilities: [60] Power Management version 2
        Capabilities: [68] Message Signalled Interrupts: Mask- 64bit+ Queue=0/0 
Enable-
        Capabilities: [78] Express Endpoint IRQ 0

03:00.0 0280: 8086:4222 (rev 02)
        Subsystem: 8086:1001
        Flags: bus master, fast devsel, latency 0, IRQ 17
        Memory at fe1ff000 (32-bit, non-prefetchable) [size=4K]
        Capabilities: [c8] Power Management version 2
        Capabilities: [d0] Message Signalled Interrupts: Mask- 64bit+ Queue=0/0 
Enable-
        Capabilities: [e0] Express Legacy Endpoint IRQ 0

06:01.0 0c00: 1180:0832 (prog-if 10 [OHCI])
        Subsystem: 1631:c022
        Flags: bus master, medium devsel, latency 64, IRQ 17
        Memory at feaff800 (32-bit, non-prefetchable) [size=2K]
        Capabilities: [dc] Power Management version 2

06:01.1 0805: 1180:0822 (rev 19)
        Subsystem: 1631:c022
        Flags: bus master, medium devsel, latency 64, IRQ 18
        Memory at feaff400 (32-bit, non-prefetchable) [size=256]
        Capabilities: [80] Power Management version 2

06:01.2 0880: 1180:0843 (rev 01)
        Subsystem: 1631:c022
        Flags: bus master, medium devsel, latency 0, IRQ 3
        Memory at feaff000 (32-bit, non-prefetchable) [size=256]
        Capabilities: [80] Power Management version 2

06:01.3 0880: 1180:0592 (rev 0a)
        Subsystem: 1631:c022
        Flags: medium devsel, IRQ 3
        Memory at feafec00 (32-bit, non-prefetchable) [size=256]
        Capabilities: [80] Power Management version 2

06:01.4 0880: 1180:0852 (rev 05)
        Subsystem: 1631:c022
        Flags: medium devsel, IRQ 3
        Memory at feafe800 (32-bit, non-prefetchable) [size=256]
        Capabilities: [80] Power Management version 2

06:07.0 0200: 10ec:8139 (rev 10)
        Subsystem: 1631:c022
        Flags: bus master, medium devsel, latency 64, IRQ 16
        I/O ports at d800 [size=256]
        Memory at feafe400 (32-bit, non-prefetchable) [size=256]
        Capabilities: [50] Power Management version 2

asoundconf list
Names of available sound cards:
Intel

cat /etc/asound.conf ~/.asoundrc*
cat: /etc/asound.conf: No such file or directory
cat: /home/dholm/.asoundrc*: No such file or directory

dmesg
[    0.000000] Linux version 2.6.20-14-generic ([EMAIL PROTECTED]) (gcc version 
4.1.2 (Ubuntu 4.1.2-0ubuntu4)) #2 SMP Mon Apr 2 20:37:49 UTC 2007 (Ubuntu 
2.6.20-14.22-generic)
[    0.000000] BIOS-provided physical RAM map:
[    0.000000] sanitize start
[    0.000000] sanitize end
[    0.000000] copy_e820_map() start: 0000000000000000 size: 000000000009fc00 
end: 000000000009fc00 type: 1
[    0.000000] copy_e820_map() type is E820_RAM
[    0.000000] copy_e820_map() start: 000000000009fc00 size: 0000000000000400 
end: 00000000000a0000 type: 2
[    0.000000] copy_e820_map() start: 00000000000e0000 size: 0000000000020000 
end: 0000000000100000 type: 2
[    0.000000] copy_e820_map() start: 0000000000100000 size: 000000003fed0000 
end: 000000003ffd0000 type: 1
[    0.000000] copy_e820_map() type is E820_RAM
[    0.000000] copy_e820_map() start: 000000003ffd0000 size: 000000000000e000 
end: 000000003ffde000 type: 3
[    0.000000] copy_e820_map() start: 000000003ffde000 size: 0000000000022000 
end: 0000000040000000 type: 4
[    0.000000] copy_e820_map() start: 00000000fee00000 size: 0000000000001000 
end: 00000000fee01000 type: 2
[    0.000000] copy_e820_map() start: 00000000ff780000 size: 0000000000880000 
end: 0000000100000000 type: 2
[    0.000000]  BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
[    0.000000]  BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
[    0.000000]  BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
[    0.000000]  BIOS-e820: 0000000000100000 - 000000003ffd0000 (usable)
[    0.000000]  BIOS-e820: 000000003ffd0000 - 000000003ffde000 (ACPI data)
[    0.000000]  BIOS-e820: 000000003ffde000 - 0000000040000000 (ACPI NVS)
[    0.000000]  BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[    0.000000]  BIOS-e820: 00000000ff780000 - 0000000100000000 (reserved)
[    0.000000] 127MB HIGHMEM available.
[    0.000000] 896MB LOWMEM available.
[    0.000000] found SMP MP-table at 000ff780
[    0.000000] Entering add_active_range(0, 0, 262096) 0 entries of 256 used
[    0.000000] Zone PFN ranges:
[    0.000000]   DMA             0 ->     4096
[    0.000000]   Normal       4096 ->   229376
[    0.000000]   HighMem    229376 ->   262096
[    0.000000] early_node_map[1] active PFN ranges
[    0.000000]     0:        0 ->   262096
[    0.000000] On node 0 totalpages: 262096
[    0.000000]   DMA zone: 32 pages used for memmap
[    0.000000]   DMA zone: 0 pages reserved
[    0.000000]   DMA zone: 4064 pages, LIFO batch:0
[    0.000000]   Normal zone: 1760 pages used for memmap
[    0.000000]   Normal zone: 223520 pages, LIFO batch:31
[    0.000000]   HighMem zone: 255 pages used for memmap
[    0.000000]   HighMem zone: 32465 pages, LIFO batch:7
[    0.000000] DMI 2.3 present.
[    0.000000] ACPI: RSDP (v000 ACPIAM                                ) @ 
0x000f7b90
[    0.000000] ACPI: RSDT (v001 A M I  OEMRSDT  0x07000605 MSFT 0x00000097) @ 
0x3ffd0000
[    0.000000] ACPI: FADT (v002 A M I  OEMFACP  0x07000605 MSFT 0x00000097) @ 
0x3ffd0200
[    0.000000] ACPI: MADT (v001 A M I  OEMAPIC  0x07000605 MSFT 0x00000097) @ 
0x3ffd0390
[    0.000000] ACPI: MCFG (v001 A M I  OEMMCFG  0x07000605 MSFT 0x00000097) @ 
0x3ffd03f0
[    0.000000] ACPI: BOOT (v001 A M I  OEMBOOT  0x07000605 MSFT 0x00000097) @ 
0x3ffd0430
[    0.000000] ACPI: OEMB (v001 A M I  AMI_OEM  0x07000605 MSFT 0x00000097) @ 
0x3ffde040
[    0.000000]   >>> ERROR: Invalid checksum
[    0.000000] ACPI: DSDT (v001  T1200 T1200200 0x00000200 INTL 0x02002026) @ 
0x00000000
[    0.000000] ACPI: PM-Timer IO Port: 0x808
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[    0.000000] Processor #0 6:14 APIC version 20
[    0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[    0.000000] Processor #1 6:14 APIC version 20
[    0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[    0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ2 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Enabling APIC mode:  Flat.  Using 1 I/O APICs
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] Allocating PCI resources starting at 50000000 (gap: 
40000000:bee00000)
[    0.000000] Detected 1596.086 MHz processor.
[   20.497445] Built 1 zonelists.  Total pages: 260049
[   20.497449] Kernel command line: 
root=UUID=c5ad1fdc-324b-4c3d-8d3c-40d35fed1e2e ro quiet splash
[   20.497615] mapped APIC to ffffd000 (fee00000)
[   20.497618] mapped IOAPIC to ffffc000 (fec00000)
[   20.497621] Enabling fast FPU save and restore... done.
[   20.497624] Enabling unmasked SIMD FPU exception support... done.
[   20.497632] Initializing CPU#0
[   20.497698] PID hash table entries: 4096 (order: 12, 16384 bytes)
[   20.500670] Console: colour VGA+ 80x25
[   20.500962] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[   20.501353] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[   20.529973] Memory: 1028204k/1048384k available (1992k kernel code, 19488k 
reserved, 893k data, 328k init, 130880k highmem)
[   20.529983] virtual kernel memory layout:
[   20.529984]     fixmap  : 0xfff4e000 - 0xfffff000   ( 708 kB)
[   20.529985]     pkmap   : 0xff800000 - 0xffc00000   (4096 kB)
[   20.529987]     vmalloc : 0xf8800000 - 0xff7fe000   ( 111 MB)
[   20.529988]     lowmem  : 0xc0000000 - 0xf8000000   ( 896 MB)
[   20.529990]       .init : 0xc03d7000 - 0xc0429000   ( 328 kB)
[   20.529991]       .data : 0xc02f2264 - 0xc03d16d4   ( 893 kB)
[   20.529992]       .text : 0xc0100000 - 0xc02f2264   (1992 kB)
[   20.529996] Checking if this processor honours the WP bit even in supervisor 
mode... Ok.
[   20.609608] Calibrating delay using timer specific routine.. 3195.90 
BogoMIPS (lpj=6391806)
[   20.609648] Security Framework v1.0.0 initialized
[   20.609655] SELinux:  Disabled at boot.
[   20.609671] Mount-cache hash table entries: 512
[   20.609799] CPU: After generic identify, caps: bfe9fbff 00100000 00000000 
00000000 0000c189 00000000 00000000
[   20.609808] monitor/mwait feature present.
[   20.609810] using mwait in idle threads.
[   20.609814] CPU: L1 I cache: 32K, L1 D cache: 32K
[   20.609817] CPU: L2 cache: 2048K
[   20.609820] CPU: Physical Processor ID: 0
[   20.609822] CPU: Processor Core ID: 0
[   20.609824] CPU: After all inits, caps: bfe9fbff 00100000 00000000 00002940 
0000c189 00000000 00000000
[   20.609833] Compat vDSO mapped to ffffe000.
[   20.609837] Remapping vsyscall page to ffffe000
[   20.609849] Checking 'hlt' instruction... OK.
[   20.625696] SMP alternatives: switching to UP code
[   20.626050] Early unpacking initramfs... done
[   20.975627] ACPI: Core revision 20060707
[   20.975852] ACPI: Looking for DSDT in initramfs... file /DSDT.aml not found, 
using machine DSDT.
[   20.995916] CPU0: Intel Genuine Intel(R) CPU           T2050  @ 1.60GHz 
stepping 08
[   20.995937] SMP alternatives: switching to SMP code
[   20.996060] Booting processor 1/1 eip 3000
[   21.006525] Initializing CPU#1
[   21.085185] Calibrating delay using timer specific routine.. 3192.29 
BogoMIPS (lpj=6384586)
[   21.085192] CPU: After generic identify, caps: bfe9fbff 00100000 00000000 
00000000 0000c189 00000000 00000000
[   21.085198] monitor/mwait feature present.
[   21.085201] CPU: L1 I cache: 32K, L1 D cache: 32K
[   21.085203] CPU: L2 cache: 2048K
[   21.085206] CPU: Physical Processor ID: 0
[   21.085207] CPU: Processor Core ID: 1
[   21.085209] CPU: After all inits, caps: bfe9fbff 00100000 00000000 00002940 
0000c189 00000000 00000000
[   21.085684] CPU1: Intel Genuine Intel(R) CPU           T2050  @ 1.60GHz 
stepping 08
[   21.085708] Total of 2 processors activated (6388.19 BogoMIPS).
[   21.085907] ENABLING IO-APIC IRQs
[   21.086111] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
[   21.233065] checking TSC synchronization across 2 CPUs: passed.
[    0.003994] Brought up 2 CPUs
[    0.276503] migration_cost=54
[    0.276792] Booting paravirtualized kernel on bare hardware
[    0.276883] Time:  6:18:02  Date: 03/11/107
[    0.276913] NET: Registered protocol family 16
[    0.277002] EISA bus registered
[    0.277007] ACPI: bus type pci registered
[    0.277200] PCI: PCI BIOS revision 3.00 entry at 0xf0031, last bus=6
[    0.277203] PCI: Using configuration type 1
[    0.277204] Setting up standard PCI resources
[    0.286732] APIC error on CPU1: 00(40)
[    0.341097] ACPI: Interpreter enabled
[    0.341100] ACPI: Using IOAPIC for interrupt routing
[    0.342378] ACPI: PCI Root Bridge [PCI0] (0000:00)
[    0.342384] PCI: Probing PCI hardware (bus 00)
[    0.343349] PCI quirk: region 0800-087f claimed by ICH6 ACPI/GPIO/TCO
[    0.343354] PCI quirk: region 0480-04bf claimed by ICH6 GPIO
[    0.343527] Boot video device is 0000:01:00.0
[    0.344683] PCI: Transparent bridge - 0000:00:1e.0
[    0.344774] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[    0.366290] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P4._PRT]
[    0.366677] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P5._PRT]
[    0.367110] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0PA._PRT]
[    0.367703] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P3._PRT]
[    0.368949] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P6._PRT]
[    0.370235] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 *11 12)
[    0.370582] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 *5 6 7 12)
[    0.370923] ACPI: PCI Interrupt Link [LNKC] (IRQs *3 4 5 6 7 12)
[    0.371261] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 *6 7 12)
[    0.371600] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 12) *0, disabled.
[    0.371956] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 *7 12)
[    0.372296] ACPI: PCI Interrupt Link [LNKG] (IRQs *3 4 5 6 7 12)
[    0.372635] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 *4 5 6 7 12)
[    0.373073] Linux Plug and Play Support v0.97 (c) Adam Belay
[    0.373086] pnp: PnP ACPI init
[    0.375605] pnp: PnP ACPI: found 12 devices
[    0.375610] PnPBIOS: Disabled by ACPI PNP
[    0.375662] PCI: Using ACPI for IRQ routing
[    0.375665] PCI: If a device doesn't work, try "pci=routeirq".  If it helps, 
post a report
[    0.375671] PCI: Cannot allocate resource region 7 of bridge 0000:00:1c.2
[    0.375673] PCI: Cannot allocate resource region 8 of bridge 0000:00:1c.2
[    0.375676] PCI: Cannot allocate resource region 9 of bridge 0000:00:1c.2
[    0.395741] NET: Registered protocol family 8
[    0.395743] NET: Registered protocol family 20
[    0.396561] pnp: 00:09: ioport range 0x400-0x41f has been reserved
[    0.396565] pnp: 00:09: ioport range 0x250-0x25f has been reserved
[    0.396888] PCI: Bridge: 0000:00:01.0
[    0.396889]   IO window: disabled.
[    0.396894]   MEM window: fa000000-fe0fffff
[    0.396898]   PREFETCH window: bdf00000-ddefffff
[    0.396902] PCI: Bridge: 0000:00:1c.0
[    0.396903]   IO window: disabled.
[    0.396909]   MEM window: disabled.
[    0.396914]   PREFETCH window: disabled.
[    0.396920] PCI: Bridge: 0000:00:1c.1
[    0.396921]   IO window: disabled.
[    0.396928]   MEM window: fe100000-fe1fffff
[    0.396932]   PREFETCH window: disabled.
[    0.396938] PCI: Bridge: 0000:00:1c.2
[    0.396940]   IO window: disabled.
[    0.396946]   MEM window: disabled.
[    0.396950]   PREFETCH window: disabled.
[    0.396957] PCI: Bridge: 0000:00:1e.0
[    0.396960]   IO window: d000-dfff
[    0.396967]   MEM window: fea00000-feafffff
[    0.396971]   PREFETCH window: disabled.
[    0.396989] ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 16 (level, low) -> 
IRQ 16
[    0.396995] PCI: Setting latency timer of device 0000:00:01.0 to 64
[    0.397018] ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 16 (level, low) -> 
IRQ 16
[    0.397024] PCI: Setting latency timer of device 0000:00:1c.0 to 64
[    0.397049] ACPI: PCI Interrupt 0000:00:1c.1[B] -> GSI 17 (level, low) -> 
IRQ 17
[    0.397055] PCI: Setting latency timer of device 0000:00:1c.1 to 64
[    0.397080] ACPI: PCI Interrupt 0000:00:1c.2[C] -> GSI 18 (level, low) -> 
IRQ 18
[    0.397088] PCI: Setting latency timer of device 0000:00:1c.2 to 64
[    0.397102] PCI: Setting latency timer of device 0000:00:1e.0 to 64
[    0.397132] NET: Registered protocol family 2
[    0.451611] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[    0.451721] TCP established hash table entries: 131072 (order: 8, 1048576 
bytes)
[    0.452475] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[    0.452864] TCP: Hash tables configured (established 131072 bind 65536)
[    0.452867] TCP reno registered
[    0.467683] checking if image is initramfs... it is
[    1.158748] Freeing initrd memory: 6775k freed
[    1.158947] Simple Boot Flag at 0x52 set to 0x1
[    1.159434] audit: initializing netlink socket (disabled)
[    1.159451] audit(1176272282.912:1): initialized
[    1.159555] highmem bounce pool size: 64 pages
[    1.159650] VFS: Disk quotas dquot_6.5.1
[    1.159670] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[    1.159723] io scheduler noop registered
[    1.159726] io scheduler anticipatory registered
[    1.159729] io scheduler deadline registered
[    1.159741] io scheduler cfq registered (default)
[    1.159998] PCI: Setting latency timer of device 0000:00:01.0 to 64
[    1.160038] assign_interrupt_mode Found MSI capability
[    1.160041] Allocate Port Service[0000:00:01.0:pcie00]
[    1.160134] PCI: Setting latency timer of device 0000:00:1c.0 to 64
[    1.160193] assign_interrupt_mode Found MSI capability
[    1.160196] Allocate Port Service[0000:00:1c.0:pcie00]
[    1.160235] Allocate Port Service[0000:00:1c.0:pcie02]
[    1.160360] PCI: Setting latency timer of device 0000:00:1c.1 to 64
[    1.160419] assign_interrupt_mode Found MSI capability
[    1.160422] Allocate Port Service[0000:00:1c.1:pcie00]
[    1.160456] Allocate Port Service[0000:00:1c.1:pcie02]
[    1.160579] PCI: Setting latency timer of device 0000:00:1c.2 to 64
[    1.160638] assign_interrupt_mode Found MSI capability
[    1.160641] Allocate Port Service[0000:00:1c.2:pcie00]
[    1.160676] Allocate Port Service[0000:00:1c.2:pcie02]
[    1.160861] isapnp: Scanning for PnP cards...
[    1.515113] isapnp: No Plug & Play device found
[    1.539301] Real Time Clock Driver v1.12ac
[    1.539362] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing 
enabled
[    1.540041] mice: PS/2 mouse device common for all mice
[    1.540635] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 
blocksize
[    1.540796] input: Macintosh mouse button emulation as /class/input/input0
[    1.540834] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
[    1.540838] ide: Assuming 33MHz system bus speed for PIO modes; override 
with idebus=xx
[    1.541088] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 
irq 1,12
[    1.544098] i8042.c: Detected active multiplexing controller, rev 1.1.
[    1.545273] serio: i8042 KBD port at 0x60,0x64 irq 1
[    1.545277] serio: i8042 AUX0 port at 0x60,0x64 irq 12
[    1.545280] serio: i8042 AUX1 port at 0x60,0x64 irq 12
[    1.545283] serio: i8042 AUX2 port at 0x60,0x64 irq 12
[    1.545286] serio: i8042 AUX3 port at 0x60,0x64 irq 12
[    1.545409] EISA: Probing bus 0 at eisa.0
[    1.545451] EISA: Detected 0 cards.
[    1.575619] TCP cubic registered
[    1.575629] NET: Registered protocol family 1
[    1.575654] Starting balanced_irq
[    1.575661] Using IPI No-Shortcut mode
[    1.575785] ACPI: (supports S0 S3 S4 S5)
[    1.575839]   Magic number: 3:717:316
[    1.575943]   hash matches device tty41
[    1.576141] Freeing unused kernel memory: 328k freed
[    1.578591] Time: tsc clocksource has been installed.
[    1.580001] input: AT Translated Set 2 keyboard as /class/input/input1
[    2.807669] Capability LSM initialized
[    2.846040] ACPI (exconfig-0455): Dynamic SSDT Load - OemId [   AMI] 
OemTableId [  CPU1PM] [20060707]
[    2.846244] ACPI: CPU0 (power states: C1[C1] C2[C2])
[    2.846249] ACPI: Processor [CPU1] (supports 8 throttling states)
[    2.846533] ACPI (exconfig-0455): Dynamic SSDT Load - OemId [   AMI] 
OemTableId [  CPU2PM] [20060707]
[    2.846707] ACPI: CPU1 (power states: C1[C1] C2[C2])
[    2.846711] ACPI: Processor [CPU2] (supports 8 throttling states)
[    3.420000] ACPI: Thermal Zone [THRM] (53 C)
[    3.424000] Time: acpi_pm clocksource has been installed.
[    3.852000] usbcore: registered new interface driver usbfs
[    3.852000] usbcore: registered new interface driver hub
[    3.852000] usbcore: registered new device driver usb
[    3.852000] USB Universal Host Controller Interface driver v3.0
[    3.852000] ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> 
IRQ 19
[    3.852000] PCI: Setting latency timer of device 0000:00:1d.0 to 64
[    3.852000] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[    3.852000] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus 
number 1
[    3.852000] uhci_hcd 0000:00:1d.0: irq 19, io base 0x0000ec00
[    3.852000] usb usb1: configuration #1 chosen from 1 choice
[    3.852000] hub 1-0:1.0: USB hub found
[    3.852000] hub 1-0:1.0: 2 ports detected
[    3.860000] ieee1394: Initialized config rom entry `ip1394'
[    3.860000] 8139too Fast Ethernet driver 0.9.28
[    3.912000] SCSI subsystem initialized
[    3.940000] libata version 2.20 loaded.
[    3.960000] ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> 
IRQ 20
[    3.960000] PCI: Setting latency timer of device 0000:00:1d.1 to 64
[    3.960000] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[    3.960000] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus 
number 2
[    3.960000] uhci_hcd 0000:00:1d.1: irq 20, io base 0x0000e880
[    3.960000] usb usb2: configuration #1 chosen from 1 choice
[    3.960000] hub 2-0:1.0: USB hub found
[    3.960000] hub 2-0:1.0: 2 ports detected
[    4.064000] ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> 
IRQ 18
[    4.064000] PCI: Setting latency timer of device 0000:00:1d.2 to 64
[    4.064000] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[    4.064000] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus 
number 3
[    4.064000] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000e800
[    4.064000] usb usb3: configuration #1 chosen from 1 choice
[    4.064000] hub 3-0:1.0: USB hub found
[    4.064000] hub 3-0:1.0: 2 ports detected
[    4.168000] ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 22 (level, low) -> 
IRQ 21
[    4.168000] PCI: Setting latency timer of device 0000:00:1d.3 to 64
[    4.168000] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[    4.168000] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus 
number 4
[    4.168000] uhci_hcd 0000:00:1d.3: irq 21, io base 0x0000e480
[    4.168000] usb usb4: configuration #1 chosen from 1 choice
[    4.168000] hub 4-0:1.0: USB hub found
[    4.168000] hub 4-0:1.0: 2 ports detected
[    4.272000] ACPI: PCI Interrupt 0000:06:01.0[A] -> GSI 17 (level, low) -> 
IRQ 17
[    4.272000] ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> 
IRQ 19
[    4.272000] PCI: Setting latency timer of device 0000:00:1d.7 to 64
[    4.272000] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[    4.272000] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus 
number 5
[    4.272000] ehci_hcd 0000:00:1d.7: debug port 1
[    4.272000] PCI: cache line size of 32 is not supported by device 
0000:00:1d.7
[    4.272000] ehci_hcd 0000:00:1d.7: irq 19, io mem 0xfebfbc00
[    4.276000] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 
2004
[    4.276000] usb usb5: configuration #1 chosen from 1 choice
[    4.276000] hub 5-0:1.0: USB hub found
[    4.276000] hub 5-0:1.0: 8 ports detected
[    4.316000] usb 2-1: new full speed USB device using uhci_hcd and address 2
[    4.324000] ohci1394: fw-host0: OHCI-1394 1.0 (PCI): IRQ=[17]  
MMIO=[feaff800-feafffff]  Max Packet=[2048]  IR/IT contexts=[4/4]
[    4.380000] ACPI: PCI Interrupt 0000:06:07.0[A] -> GSI 16 (level, low) -> 
IRQ 16
[    4.380000] eth0: RealTek RTL8139 at 0xf88da400, 00:18:f3:00:44:2b, IRQ 16
[    4.380000] eth0:  Identified 8139 chip type 'RTL-8100B/8139D'
[    4.384000] 8139cp: 10/100 PCI Ethernet driver v1.3 (Mar 22, 2004)
[    4.384000] ata_piix 0000:00:1f.1: version 2.10ac1
[    4.384000] ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 18 (level, low) -> 
IRQ 18
[    4.384000] PCI: Setting latency timer of device 0000:00:1f.1 to 64
[    4.384000] ata1: PATA max UDMA/133 cmd 0x000101f0 ctl 0x000103f6 bmdma 
0x0001ffa0 irq 14
[    4.384000] ata2: PATA max UDMA/133 cmd 0x00010170 ctl 0x00010376 bmdma 
0x0001ffa8 irq 15
[    4.384000] scsi0 : ata_piix
[    4.712000] ata1.00: ATA-6: ST980811A, 3.ALA, max UDMA/100
[    4.712000] ata1.00: 156301488 sectors, multi 16: LBA48 
[    4.712000] ata1.01: ATAPI, max UDMA/33
[    4.720000] ata1.00: configured for UDMA/100
[    4.884000] ata1.01: configured for UDMA/33
[    4.884000] scsi1 : ata_piix
[    4.884000] ata2: port disabled. ignoring.
[    4.884000] scsi 0:0:0:0: Direct-Access     ATA      ST980811A        3.AL 
PQ: 0 ANSI: 5
[    4.884000] scsi 0:0:1:0: CD-ROM            _NEC     DVD_RW ND-6750A  2.61 
PQ: 0 ANSI: 5
[    4.900000] SCSI device sda: 156301488 512-byte hdwr sectors (80026 MB)
[    4.900000] sda: Write Protect is off
[    4.900000] sda: Mode Sense: 00 3a 00 00
[    4.900000] SCSI device sda: write cache: enabled, read cache: enabled, 
doesn't support DPO or FUA
[    4.900000] SCSI device sda: 156301488 512-byte hdwr sectors (80026 MB)
[    4.900000] sda: Write Protect is off
[    4.900000] sda: Mode Sense: 00 3a 00 00
[    4.900000] SCSI device sda: write cache: enabled, read cache: enabled, 
doesn't support DPO or FUA
[    4.900000]  sda: sda1 sda3 sda4 < sda5 sda6 >
[    5.024000] sd 0:0:0:0: Attached scsi disk sda
[    5.028000] sd 0:0:0:0: Attached scsi generic sg0 type 0
[    5.028000] sr 0:0:1:0: Attached scsi generic sg1 type 5
[    5.032000] sr0: scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda tray
[    5.032000] Uniform CD-ROM driver Revision: 3.20
[    5.032000] sr 0:0:1:0: Attached scsi CD-ROM sr0
[    5.252000] usb 5-8: new high speed USB device using ehci_hcd and address 4
[    5.276000] kjournald starting.  Commit interval 5 seconds
[    5.276000] EXT3-fs: mounted filesystem with ordered data mode.
[    5.472000] usb 5-8: configuration #1 chosen from 1 choice
[    5.604000] ieee1394: Host added: ID:BUS[0-00:1023]  GUID[00e018000361c53e]
[    5.712000] usb 2-1: new full speed USB device using uhci_hcd and address 3
[    5.876000] usb 2-1: configuration #1 chosen from 1 choice
[    6.116000] usb 2-2: new low speed USB device using uhci_hcd and address 4
[    6.348000] usb 2-2: configuration #1 chosen from 1 choice
[   17.648000] eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
[   18.692000] Linux agpgart interface v0.102 (c) Dave Jones
[   18.712000] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[   18.716000] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[   18.780000] agpgart: Detected an Intel 945GM Chipset.
[   18.800000] agpgart: AGP aperture is 256M @ 0x0
[   18.972000] NET: Registered protocol family 17
[   19.064000] intel_rng: FWH not detected
[   19.116000] iTCO_vendor_support: vendor-support=0
[   19.116000] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.01 (11-Nov-2006)
[   19.196000] ieee80211_crypt: registered algorithm 'NULL'
[   19.232000] ieee80211: 802.11 data/management/control stack, git-1.1.13
[   19.232000] ieee80211: Copyright (C) 2004-2005 Intel Corporation <[EMAIL 
PROTECTED]>
[   19.380000] usbcore: registered new interface driver usbserial
[   19.380000] drivers/usb/serial/usb-serial.c: USB Serial support registered 
for generic
[   19.452000] sdhci: Secure Digital Host Controller Interface driver
[   19.452000] sdhci: Copyright(c) Pierre Ossman
[   19.452000] sdhci: SDHCI controller found at 0000:06:01.1 [1180:0822] (rev 
19)
[   19.452000] ACPI: PCI Interrupt 0000:06:01.1[B] -> GSI 18 (level, low) -> 
IRQ 18
[   19.452000] mmc0: SDHCI at 0xfeaff400 irq 18 DMA
[   19.492000] ipw3945: Intel(R) PRO/Wireless 3945 Network Connection driver 
for Linux, 1.2.0mp
[   19.492000] ipw3945: Copyright(c) 2003-2006 Intel Corporation
[   19.504000] nvidia: module license 'NVIDIA' taints kernel.
[   19.508000] ACPI: PCI Interrupt 0000:03:00.0[A] -> GSI 17 (level, low) -> 
IRQ 17
[   19.508000] PCI: Setting latency timer of device 0000:03:00.0 to 64
[   19.508000] ipw3945: Detected Intel PRO/Wireless 3945ABG Network Connection
[   19.604000] usbcore: registered new interface driver usbserial_generic
[   19.604000] drivers/usb/serial/usb-serial.c: USB Serial Driver core
[   19.604000] usbcore: registered new interface driver hiddev
[   19.620000] input: Logitech USB-PS/2 Optical Mouse as /class/input/input2
[   19.620000] input: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on 
usb-0000:00:1d.1-2
[   19.620000] usbcore: registered new interface driver usbhid
[   19.620000] drivers/usb/input/hid-core.c: v2.6:USB HID core driver
[   19.748000] Synaptics Touchpad, model: 1, fw: 6.2, id: 0x3aa0b4, caps: 
0xa04713/0x200000
[   19.792000] input: SynPS/2 Synaptics TouchPad as /class/input/input3
[   19.796000] iTCO_wdt: Found a ICH7-M TCO device (Version=2, TCOBASE=0x0860)
[   19.796000] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[   19.796000] input: PC Speaker as /class/input/input4
[   19.876000] ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> 
IRQ 16
[   19.876000] PCI: Setting latency timer of device 0000:01:00.0 to 64
[   19.876000] NVRM: loading NVIDIA Linux x86 Kernel Module  1.0-9631  Thu Nov  
9 17:38:10 PST 2006
[   19.904000] drivers/usb/serial/usb-serial.c: USB Serial support registered 
for pl2303
[   19.904000] pl2303 2-1:1.0: pl2303 converter detected
[   19.904000] usb 2-1: pl2303 converter now attached to ttyUSB0
[   19.904000] usbcore: registered new interface driver pl2303
[   19.904000] drivers/usb/serial/pl2303.c: Prolific PL2303 USB to serial 
adaptor driver
[   20.056000] ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 21 (level, low) -> 
IRQ 22
[   20.056000] PCI: Setting latency timer of device 0000:00:1b.0 to 64
[   20.700000] fuse init (API version 7.8)
[   20.760000] lp: driver loaded but no devices found
[   20.864000] Adding 1052216k swap on 
/dev/disk/by-uuid/766ca984-4e82-4c08-94f9-71fa63bae40f.  Priority:-1 extents:1 
across:1052216k
[   20.992000] EXT3 FS on sda1, internal journal
[   21.256000] kjournald starting.  Commit interval 5 seconds
[   21.256000] EXT3 FS on sda5, internal journal
[   21.256000] EXT3-fs: mounted filesystem with ordered data mode.
[   21.844000] ipw3945: Detected geography ABG (13 802.11bg channels, 23 
802.11a channels)
[   21.888000] NET: Registered protocol family 10
[   21.888000] lo: Disabled Privacy Extensions
[   32.220000] eth0: no IPv6 routers present
[   53.688000] ADDRCONF(NETDEV_UP): eth1: link is not ready
[   67.808000] ACPI: Battery Slot [BAT0] (battery present)
[   67.824000] ACPI: AC Adapter [AC0] (on-line)
[   67.836000] ACPI: Video Device [VGA] (multi-head: yes  rom: no  post: no)
[   67.904000] ibm_acpi: ec object not found
[   67.948000] Asus Laptop ACPI Extras version 0.30
[   67.948000]   unsupported model T12J, trying default values
[   67.948000]   send /proc/acpi/dsdt to the developers
[   67.960000] No dock devices found.
[   67.972000] input: Power Button (FF) as /class/input/input5
[   67.972000] ACPI: Power Button (FF) [PWRF]
[   67.972000] input: Lid Switch as /class/input/input6
[   67.972000] ACPI: Lid Switch [LID]
[   67.972000] input: Power Button (CM) as /class/input/input7
[   67.972000] ACPI: Power Button (CM) [PWRB]
[   67.972000] input: Sleep Button (CM) as /class/input/input8
[   67.972000] ACPI: Sleep Button (CM) [SLPB]
[   68.056000] Using specific hotkey driver
[   68.180000] pcc_acpi: loading...
[   75.696000] **WARNING** I2C adapter driver [NVIDIA i2c adapter 0 at 1:00.0] 
forgot to specify physical device; fix it!
[   75.696000] **WARNING** I2C adapter driver [NVIDIA i2c adapter 1 at 1:00.0] 
forgot to specify physical device; fix it!
[   75.696000] **WARNING** I2C adapter driver [NVIDIA i2c adapter 2 at 1:00.0] 
forgot to specify physical device; fix it!
[   75.792000] ppdev: user-space parallel port driver
[   78.376000] apm: BIOS not found.
[   80.272000] Bluetooth: Core ver 2.11
[   80.272000] NET: Registered protocol family 31
[   80.272000] Bluetooth: HCI device and connection manager initialized
[   80.272000] Bluetooth: HCI socket layer initialized
[   80.420000] Bluetooth: L2CAP ver 2.8
[   80.420000] Bluetooth: L2CAP socket layer initialized
[   80.536000] Bluetooth: RFCOMM socket layer initialized
[   80.536000] Bluetooth: RFCOMM TTY layer initialized
[   80.536000] Bluetooth: RFCOMM ver 1.8
[   88.040000] eth0: no IPv6 routers present

cat /proc/interrupts 
           CPU0       CPU1       
  0:     313642          0   IO-APIC-edge      timer
  1:        521          0   IO-APIC-edge      i8042
  8:          3          0   IO-APIC-edge      rtc
  9:       1235          0   IO-APIC-fasteoi   acpi
 12:        133          0   IO-APIC-edge      i8042
 14:      26415          0   IO-APIC-edge      libata
 15:          0          0   IO-APIC-edge      libata
 16:      75526          0   IO-APIC-fasteoi   eth0, nvidia
 17:      27038          0   IO-APIC-fasteoi   ohci1394, ipw3945
 18:          0          0   IO-APIC-fasteoi   uhci_hcd:usb3, sdhci:slot0
 19:         20          0   IO-APIC-fasteoi   uhci_hcd:usb1, ehci_hcd:usb5
 20:      16257          0   IO-APIC-fasteoi   uhci_hcd:usb2
 21:          0          0   IO-APIC-fasteoi   uhci_hcd:usb4
 22:       1969          0   IO-APIC-fasteoi   HDA Intel
NMI:          0          0 
LOC:     313253     313256 
ERR:          1
MIS:          0

-- 
Sound disappearing with Intel HDA AD1986A on 2.6.20-14-generic 
https://bugs.launchpad.net/bugs/103699
You received this bug notification because you are a member of Ubuntu
Bugs, which is the bug contact for Ubuntu.

-- 
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs

Reply via email to