Public bug reported: Binary package hint: linux-image
I have an Edimax EW-7711UAN wireless adapter which should be supported by the rt2870sta driver. In maverick the adapter is recognised and an interface is created, however no traffic passes over the interface and no access points can be seen. The system is running a basic maverick i386 install with no updates (since no network connection), except for linux-image-2.6.35-25-generic since this contained the rt2870 module and I was hoping there might already be a fix for this. Other possibly relevant information below: $ uname -r 2.6.35-25-generic $ lsusb Bus 001 Device 006: ID 7392:7711 Edimax Technology Co., Ltd EW-7711UTn nLite Wireless Adapter [Ralink RT2870] $ sudo iwconfig lo no wireless extensions. eth0 no wireless extensions. wlan0 Ralink STA ESSID:"" Nickname:"RT2870STA" Mode:Auto Frequency=2.412 GHz Access Point: Not-Associated Bit Rate:1 Mb/s RTS thr:off Fragment thr:off Encryption key:off Link Quality=10/100 Signal level:0 dBm Noise level:-115 dBm Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0 Tx excessive retries:0 Invalid misc:0 Missed beacon:0 $ sudo iwlist wlan0 scan wlan0 No scan results $ sudo ifdown wlan0 ifdown: interface wlan0 not configured # /var/log/messages when inserting adapter Feb 16 13:23:29 belettes kernel: [ 214.216023] usb 1-4: new high speed USB device using ehci_hcd and address 6 Feb 16 13:23:29 belettes kernel: [ 214.367612] === pAd = e1998000, size = 472668 === Feb 16 13:23:29 belettes kernel: [ 214.367620] <-- RTMPAllocAdapterBlock, Status=0 Feb 16 13:23:29 belettes kernel: [ 214.685599] <-- RTMPAllocTxRxRingMemory, Status=0 Feb 16 13:23:29 belettes kernel: [ 214.687303] -->RTUSBVenderReset Feb 16 13:23:29 belettes kernel: [ 214.687427] <--RTUSBVenderReset Feb 16 13:23:29 belettes kernel: [ 214.971037] 1. Phy Mode = 0 Feb 16 13:23:29 belettes kernel: [ 214.971041] 2. Phy Mode = 0 Feb 16 13:23:29 belettes kernel: [ 214.971045] NVM is Efuse and its size =2d[2d0-2fc] Feb 16 13:23:29 belettes kernel: [ 215.033910] RTMPSetPhyMode: channel is out of range, use first channel=1 Feb 16 13:23:29 belettes kernel: [ 215.048781] 3. Phy Mode = 0 Feb 16 13:23:29 belettes kernel: [ 215.058408] MCS Set = 00 00 00 00 00 Feb 16 13:23:30 belettes kernel: [ 215.101901] <==== rt28xx_init, Status=0 Feb 16 13:23:30 belettes kernel: [ 215.103398] 0x1300 = 00073200 Feb 16 13:23:30 belettes kernel: [ 215.388458] ---> RTMPFreeTxRxRingMemory Feb 16 13:23:30 belettes kernel: [ 215.388501] <--- RTMPFreeTxRxRingMemory Feb 16 13:23:30 belettes kernel: [ 215.663273] <-- RTMPAllocTxRxRingMemory, Status=0 Feb 16 13:23:30 belettes kernel: [ 215.664982] -->RTUSBVenderReset Feb 16 13:23:30 belettes kernel: [ 215.665104] <--RTUSBVenderReset Feb 16 13:23:30 belettes kernel: [ 215.950089] 1. Phy Mode = 0 Feb 16 13:23:30 belettes kernel: [ 215.950093] 2. Phy Mode = 0 Feb 16 13:23:30 belettes kernel: [ 215.950097] NVM is Efuse and its size =2d[2d0-2fc] Feb 16 13:23:30 belettes kernel: [ 216.027208] 3. Phy Mode = 0 Feb 16 13:23:30 belettes kernel: [ 216.033210] MCS Set = 00 00 00 00 00 Feb 16 13:23:30 belettes kernel: [ 216.075078] <==== rt28xx_init, Status=0 Feb 16 13:23:31 belettes kernel: [ 216.076577] 0x1300 = 00073200 ** Affects: linux-meta (Ubuntu) Importance: Undecided Status: New -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/720053 Title: Edimax Ralink wireless adapter can't see networks -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs