I've got an computer which only support IDE hdd (no SATA). Linux kernel 2.6.17
works with it but, upgrading to feisty this morning, 2.6.20-14 doesn't.
The output show that linux detects 2 ata controler but recognise only cdrom
devices attached to the second one. I tried to connect hdd to the second ata
port but it doesn't work better.
Linux image 2.6.20-2 with is on a old daily live cd seems to recognize
hdd but I can download the packet anymore on archive.ubuntu.com.
I copy bellow output of dmesg and lspci -vvn :with old kernel image :
[17179569.184000] Linux version 2.6.17-11-generic ([EMAIL PROTECTED]) (gcc
version 4.1.2 20060928 (prerelease) (Ubuntu 4.1.1-13ubuntu5)) #2 SMP Tue Mar 13
23:32:38 UTC 2007 (Ubuntu 2.6.17-11.37-generic)
[17179569.184000] BIOS-provided physical RAM map:
[17179569.184000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
[17179569.184000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
[17179569.184000] BIOS-e820: 00000000000d2000 - 00000000000d8006 (reserved)
[17179569.184000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
[17179569.184000] BIOS-e820: 0000000000100000 - 000000002fff0000 (usable)
[17179569.184000] BIOS-e820: 000000002fff0000 - 000000002fff8000 (ACPI data)
[17179569.184000] BIOS-e820: 000000002fff8000 - 0000000030000000 (ACPI NVS)
[17179569.184000] BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
[17179569.184000] BIOS-e820: 00000000fed00000 - 00000000fed01000 (reserved)
[17179569.184000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[17179569.184000] BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved)
[17179569.184000] 0MB HIGHMEM available.
[17179569.184000] 767MB LOWMEM available.
[17179569.184000] On node 0 totalpages: 196592
[17179569.184000] DMA zone: 4096 pages, LIFO batch:0
[17179569.184000] Normal zone: 192496 pages, LIFO batch:31
[17179569.184000] DMI 2.3 present.
[17179569.184000] ACPI: RSDP (v000 AMI ) @
0x000fa6e0
[17179569.184000] ACPI: RSDT (v001 HP-BDD HPBDD-JH 0x00000010 MSFT 0x00000097)
@ 0x2fff0000
[17179569.184000] ACPI: FADT (v001 HP-BDD HPBDD-JH 0x00000011 MSFT 0x00000097)
@ 0x2fff0030
[17179569.184000] ACPI: MADT (v001 HP-BDD HPBDD-JH 0x00000001 MSFT 0x00000097)
@ 0x2fff00c0
[17179569.184000] ACPI: DSDT (v001 HP-BDD HPBDD-JH 0x00000001 MSFT 0x0100000d)
@ 0x00000000
[17179569.184000] ACPI: PM-Timer IO Port: 0x808
[17179569.184000] ACPI: Local APIC address 0xfee00000
[17179569.184000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[17179569.184000] Processor #0 15:2 APIC version 20
[17179569.184000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[17179569.184000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[17179569.184000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[17179569.184000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[17179569.184000] ACPI: IRQ0 used by override.
[17179569.184000] ACPI: IRQ2 used by override.
[17179569.184000] ACPI: IRQ9 used by override.
[17179569.184000] Enabling APIC mode: Flat. Using 1 I/O APICs
[17179569.184000] Using ACPI (MADT) for SMP configuration information
[17179569.184000] Allocating PCI resources starting at 40000000 (gap:
30000000:cec00000)
[17179569.184000] Built 1 zonelists
[17179569.184000] Kernel command line:
root=UUID=b2968f82-9f11-4135-9a54-2d197822e5b4 ro quiet splash
[17179569.184000] mapped APIC to ffffd000 (fee00000)
[17179569.184000] mapped IOAPIC to ffffc000 (fec00000)
[17179569.184000] Enabling fast FPU save and restore... done.
[17179569.184000] Enabling unmasked SIMD FPU exception support... done.
[17179569.184000] Initializing CPU#0
[17179569.184000] PID hash table entries: 4096 (order: 12, 16384 bytes)
[17179569.184000] Detected 2400.089 MHz processor.
[17179569.184000] Using pmtmr for high-res timesource
[17179569.184000] Console: colour VGA+ 80x25
[17179571.328000] Dentry cache hash table entries: 131072 (order: 7, 524288
bytes)
[17179571.328000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[17179571.352000] Memory: 766944k/786368k available (1911k kernel code, 18824k
reserved, 1073k data, 308k init, 0k highmem)
[17179571.352000] Checking if this processor honours the WP bit even in
supervisor mode... Ok.
[17179571.432000] Calibrating delay using timer specific routine.. 4804.74
BogoMIPS (lpj=9609492)
[17179571.432000] Security Framework v1.0.0 initialized
[17179571.432000] SELinux: Disabled at boot.
[17179571.432000] Mount-cache hash table entries: 512
[17179571.432000] CPU: After generic identify, caps: 3febfbff 00000000 00000000
00000000 00000000 00000000 00000000
[17179571.432000] CPU: After vendor identify, caps: 3febfbff 00000000 00000000
00000000 00000000 00000000 00000000
[17179571.432000] CPU: Trace cache: 12K uops, L1 D cache: 8K
[17179571.432000] CPU: L2 cache: 512K
[17179571.432000] CPU: Hyper-Threading is disabled
[17179571.432000] CPU: After all inits, caps: 3febfbff 00000000 00000000
00000080 00000000 00000000 00000000
[17179571.432000] Checking 'hlt' instruction... OK.
[17179571.448000] SMP alternatives: switching to UP code
[17179571.448000] Freeing SMP alternatives: 16k freed
[17179571.448000] checking if image is initramfs... it is
[17179572.308000] Freeing initrd memory: 8092k freed
[17179572.308000] ACPI: Core revision 20060707
[17179572.308000] ACPI: Looking for DSDT ... not found!
[17179572.312000] CPU0: Intel(R) Pentium(R) 4 Family CPU 2.40GHz stepping 04
[17179572.312000] Total of 1 processors activated (4804.74 BogoMIPS).
[17179572.312000] ENABLING IO-APIC IRQs
[17179572.312000] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
[17179572.456000] Brought up 1 CPUs
[17179572.456000] migration_cost=0
[17179572.456000] NET: Registered protocol family 16
[17179572.456000] EISA bus registered
[17179572.456000] ACPI: bus type pci registered
[17179572.456000] PCI: PCI BIOS revision 2.10 entry at 0xfdaa1, last bus=3
[17179572.456000] PCI: Using configuration type 1
[17179572.456000] Setting up standard PCI resources
[17179572.464000] ACPI: Interpreter enabled
[17179572.464000] ACPI: Using IOAPIC for interrupt routing
[17179572.468000] ACPI: PCI Root Bridge [PCI0] (0000:00)
[17179572.468000] PCI: Probing PCI hardware (bus 00)
[17179572.468000] PCI quirk: region 0800-087f claimed by ICH4 ACPI/GPIO/TCO
[17179572.468000] PCI quirk: region 0400-043f claimed by ICH4 GPIO
[17179572.468000] PCI: Ignoring BAR0-3 of IDE controller 0000:00:1f.1
[17179572.468000] Boot video device is 0000:01:00.0
[17179572.468000] PCI: Transparent bridge - 0000:00:1e.0
[17179572.468000] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[17179572.484000] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.ICHB._PRT]
[17179572.488000] ACPI: Power Resource [URP1] (off)
[17179572.488000] ACPI: Power Resource [URP2] (off)
[17179572.488000] ACPI: Power Resource [FDDP] (off)
[17179572.488000] ACPI: Power Resource [LPTP] (off)
[17179572.488000] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14
15)
[17179572.488000] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 11 12 14
15) *0, disabled.
[17179572.492000] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 7 10 11 12 14
15)
[17179572.492000] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 *11 12 14
15)
[17179572.492000] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 *11 12 14
15)
[17179572.492000] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14
15) *0, disabled.
[17179572.492000] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 12 14
15) *0, disabled.
[17179572.492000] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 *10 11 12 14
15)
[17179572.492000] Linux Plug and Play Support v0.97 (c) Adam Belay
[17179572.492000] pnp: PnP ACPI init
[17179572.496000] pnp: PnP ACPI: found 12 devices
[17179572.496000] PnPBIOS: Disabled by ACPI PNP
[17179572.496000] PCI: Using ACPI for IRQ routing
[17179572.496000] PCI: If a device doesn't work, try "pci=routeirq". If it
helps, post a report
[17179572.500000] PCI: Bridge: 0000:00:01.0
[17179572.500000] IO window: c000-cfff
[17179572.500000] MEM window: dfc00000-dfdfffff
[17179572.500000] PREFETCH window: bf800000-df9fffff
[17179572.500000] PCI: Bridge: 0000:00:1e.0
[17179572.500000] IO window: d000-dfff
[17179572.500000] MEM window: dfe00000-dfefffff
[17179572.500000] PREFETCH window: dfa00000-dfafffff
[17179572.500000] PCI: Setting latency timer of device 0000:00:1e.0 to 64
[17179572.500000] NET: Registered protocol family 2
[17179572.540000] IP route cache hash table entries: 32768 (order: 5, 131072
bytes)
[17179572.540000] TCP established hash table entries: 131072 (order: 8, 1048576
bytes)
[17179572.540000] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[17179572.540000] TCP: Hash tables configured (established 131072 bind 65536)
[17179572.540000] TCP reno registered
[17179572.540000] * This chipset may have PM-Timer Bug. Due to workarounds for
a bug,
[17179572.540000] * this time source is slow. If you are sure your timer does
not have
[17179572.540000] * this bug, please use "pmtmr_good" to disable the workaround
[17179572.540000] audit: initializing netlink socket (disabled)
[17179572.540000] audit(1176482490.540:1): initialized
[17179572.540000] VFS: Disk quotas dquot_6.5.1
[17179572.540000] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[17179572.540000] Initializing Cryptographic API
[17179572.540000] io scheduler noop registered
[17179572.540000] io scheduler anticipatory registered
[17179572.544000] io scheduler deadline registered
[17179572.544000] io scheduler cfq registered (default)
[17179572.544000] isapnp: Scanning for PnP cards...
[17179572.896000] isapnp: No Plug & Play device found
[17179572.924000] Real Time Clock Driver v1.12ac
[17179572.924000] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ
sharing enabled
[17179572.924000] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[17179572.924000] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[17179572.924000] 00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[17179572.924000] 00:09: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[17179572.928000] mice: PS/2 mouse device common for all mice
[17179572.928000] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024
blocksize
[17179572.928000] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
[17179572.928000] ide: Assuming 33MHz system bus speed for PIO modes; override
with idebus=xx
[17179572.928000] PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
[17179572.928000] PNP: PS/2 controller doesn't have AUX irq; using default 12
[17179572.928000] serio: i8042 AUX port at 0x60,0x64 irq 12
[17179572.928000] serio: i8042 KBD port at 0x60,0x64 irq 1
[17179572.932000] EISA: Probing bus 0 at eisa.0
[17179572.932000] EISA: Detected 0 cards.
[17179572.932000] TCP bic registered
[17179572.932000] NET: Registered protocol family 1
[17179572.932000] NET: Registered protocol family 8
[17179572.932000] NET: Registered protocol family 20
[17179572.932000] Using IPI No-Shortcut mode
[17179572.932000] ACPI: (supports S0 S1 S3 S4 S5)
[17179572.932000] Freeing unused kernel memory: 308k freed
[17179573.120000] input: AT Translated Set 2 keyboard as /class/input/input0
[17179574.192000] Capability LSM initialized
[17179574.212000] device-mapper: 4.6.0-ioctl (2006-02-17) initialised: [EMAIL
PROTECTED]
[17179574.832000] usbcore: registered new driver usbfs
[17179574.832000] usbcore: registered new driver hub
[17179574.832000] USB Universal Host Controller Interface driver v3.0
[17179574.832000] ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 16 (level, low) ->
IRQ 169
[17179574.832000] PCI: Setting latency timer of device 0000:00:1d.0 to 64
[17179574.832000] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[17179574.832000] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus
number 1
[17179574.832000] uhci_hcd 0000:00:1d.0: irq 169, io base 0x0000e400
[17179574.832000] usb usb1: configuration #1 chosen from 1 choice
[17179574.832000] hub 1-0:1.0: USB hub found
[17179574.832000] hub 1-0:1.0: 2 ports detected
[17179574.892000] md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27
[17179574.892000] md: bitmap version 4.39
[17179574.896000] md: linear personality registered for level -1
[17179574.900000] md: multipath personality registered for level -4
[17179574.904000] md: raid0 personality registered for level 0
[17179574.908000] md: raid1 personality registered for level 1
[17179574.920000] raid5: automatically using best checksumming function:
pIII_sse
[17179574.940000] pIII_sse : 3147.000 MB/sec
[17179574.940000] raid5: using function: pIII_sse (3147.000 MB/sec)
[17179574.940000] ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) ->
IRQ 177
[17179574.940000] PCI: Setting latency timer of device 0000:00:1d.1 to 64
[17179574.940000] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[17179574.940000] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus
number 2
[17179574.940000] uhci_hcd 0000:00:1d.1: irq 177, io base 0x0000e800
[17179574.940000] usb usb2: configuration #1 chosen from 1 choice
[17179574.940000] hub 2-0:1.0: USB hub found
[17179574.940000] hub 2-0:1.0: 2 ports detected
[17179575.076000] ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) ->
IRQ 185
[17179575.076000] PCI: Setting latency timer of device 0000:00:1d.2 to 64
[17179575.076000] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[17179575.076000] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus
number 3
[17179575.076000] uhci_hcd 0000:00:1d.2: irq 185, io base 0x0000ec00
[17179575.076000] usb usb3: configuration #1 chosen from 1 choice
[17179575.076000] hub 3-0:1.0: USB hub found
[17179575.076000] hub 3-0:1.0: 2 ports detected
[17179575.108000] Floppy drive(s): fd0 is 1.44M
[17179575.112000] e100: Intel(R) PRO/100 Network Driver, 3.5.10-k2-NAPI
[17179575.112000] e100: Copyright(c) 1999-2005 Intel Corporation
[17179575.116000] md: raid5 personality registered for level 5
[17179575.116000] md: raid4 personality registered for level 4
[17179575.132000] FDC 0 is a post-1991 82077
[17179575.204000] raid6: int32x1 631 MB/s
[17179575.272000] raid6: int32x2 641 MB/s
[17179575.340000] raid6: int32x4 625 MB/s
[17179575.408000] raid6: int32x8 412 MB/s
[17179575.476000] raid6: mmxx1 1908 MB/s
[17179575.544000] raid6: mmxx2 2435 MB/s
[17179575.612000] raid6: sse1x1 1138 MB/s
[17179575.680000] raid6: sse1x2 2148 MB/s
[17179575.748000] raid6: sse2x1 2538 MB/s
[17179575.816000] raid6: sse2x2 2706 MB/s
[17179575.816000] raid6: using algorithm sse2x2 (2706 MB/s)
[17179575.816000] md: raid6 personality registered for level 6
[17179575.816000] ACPI: PCI Interrupt 0000:00:1d.7[D] -> GSI 23 (level, low) ->
IRQ 193
[17179575.816000] PCI: Setting latency timer of device 0000:00:1d.7 to 64
[17179575.816000] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[17179575.816000] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus
number 4
[17179575.816000] ehci_hcd 0000:00:1d.7: debug port 1
[17179575.816000] PCI: cache line size of 128 is not supported by device
0000:00:1d.7
[17179575.816000] ehci_hcd 0000:00:1d.7: irq 193, io mem 0xdffffc00
[17179575.820000] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10
Dec 2004
[17179575.820000] usb usb4: configuration #1 chosen from 1 choice
[17179575.820000] hub 4-0:1.0: USB hub found
[17179575.820000] hub 4-0:1.0: 6 ports detected
[17179575.824000] md: raid10 personality registered for level 10
[17179575.872000] usb 1-2: new low speed USB device using uhci_hcd and address 2
[17179575.928000] ACPI: PCI Interrupt 0000:03:08.0[A] -> GSI 20 (level, low) ->
IRQ 201
[17179575.948000] e100: eth0: e100_probe: addr 0xdfeff000, irq 201, MAC addr
00:04:23:1D:CF:74
[17179575.952000] ICH4: IDE controller at PCI slot 0000:00:1f.1
[17179575.952000] ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 18 (level, low) ->
IRQ 185
[17179575.952000] ICH4: chipset revision 1
[17179575.952000] ICH4: not 100% native mode: will probe irqs later
[17179575.952000] ide0: BM-DMA at 0xfc00-0xfc07, BIOS settings: hda:DMA,
hdb:pio
[17179575.952000] ide1: BM-DMA at 0xfc08-0xfc0f, BIOS settings: hdc:DMA,
hdd:DMA
[17179575.952000] Probing IDE interface ide0...
[17179576.128000] hda: probing with STATUS(0x50) instead of ALTSTATUS(0x00)
[17179576.244000] hda: Maxtor 6L300R0, ATA DISK drive
[17179576.448000] usb 1-2: new low speed USB device using uhci_hcd and address 3
[17179576.632000] usb 1-2: configuration #1 chosen from 1 choice
[17179576.920000] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
[17179576.944000] Probing IDE interface ide1...
[17179577.684000] hdc: HITACHI DVD-ROM GD-7500, ATAPI CD/DVD-ROM drive
[17179578.472000] hdd: LITE-ON LTR-24102B, ATAPI CD/DVD-ROM drive
[17179578.532000] ide1 at 0x170-0x177,0x376 on irq 15
[17179578.604000] usbcore: registered new driver hiddev
[17179578.612000] hdc: ATAPI 40X DVD-ROM drive, 512kB Cache, UDMA(33)
[17179578.612000] Uniform CD-ROM driver Revision: 3.20
[17179578.616000] hda: max request size: 512KiB
[17179578.616000] hda: Host Protected Area detected.
[17179578.616000] current capacity is 586114704 sectors (300090 MB)
[17179578.616000] native capacity is 263223780533904 sectors
(134770575633 MB)
[17179578.620000] hdd: ATAPI 40X CD-ROM CD-R/RW drive, 2048kB Cache, UDMA(33)
[17179578.632000] hda: task_no_data_intr: status=0x51 { DriveReady SeekComplete
Error }
[17179578.632000] hda: task_no_data_intr: error=0x04 { DriveStatusError }
[17179578.632000] ide: failed opcode was: 0x37
[17179578.644000] hda: 586114704 sectors (300090 MB) w/16384KiB Cache,
CHS=36483/255/63, UDMA(100)
[17179578.644000] hda: cache flushes supported
[17179578.644000] hda:<6>input: Logitech USB Mouse as /class/input/input1
[17179578.648000] input: USB HID v1.10 Mouse [Logitech USB Mouse] on
usb-0000:00:1d.0-2
[17179578.648000] usbcore: registered new driver usbhid
[17179578.648000] drivers/usb/input/hid-core.c: v2.6:USB HID core driver
[17179578.668000] hda1 hda2 < hda5 hda6 hda7 hda8 hda9 hda10 >
[17179579.236000] kjournald starting. Commit interval 5 seconds
[17179579.236000] EXT3-fs: mounted filesystem with ordered data mode.
[17179588.216000] e100: eth0: e100_watchdog: link up, 100Mbps, full-duplex
[17179589.216000] ts: Compaq touchscreen protocol output
[17179589.632000] NET: Registered protocol family 17
[17179590.264000] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[17179590.268000] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[17179590.616000] input: PC Speaker as /class/input/input2
[17179590.692000] Linux agpgart interface v0.101 (c) Dave Jones
[17179590.720000] agpgart: Detected an Intel 845G Chipset.
[17179590.724000] agpgart: AGP aperture is 64M @ 0xe0000000
[17179590.748000] parport: PnPBIOS parport detected.
[17179590.748000] parport0: PC-style at 0x378 (0x778), irq 7, dma 1
[PCSPP,TRISTATE,COMPAT,ECP,DMA]
[17179590.764000] hw_random: RNG not detected
[17179591.128000] gameport: EMU10K1 is pci0000:03:0b.1/gameport0, io 0xdc00,
speed 1028kHz
[17179591.476000] PCI: Enabling device 0000:03:0b.0 (0100 -> 0101)
[17179591.476000] ACPI: PCI Interrupt 0000:03:0b.0[A] -> GSI 19 (level, low) ->
IRQ 177
[17179591.724000] lp0: using parport0 (interrupt-driven).
[17179591.796000] Adding 1028088k swap on
/dev/disk/by-uuid/9b87a334-b915-42e2-8b49-df9f07f7a8de. Priority:-1 extents:1
across:1028088k
[17179591.996000] EXT3 FS on hda10, internal journal
[17179592.140000] NET: Registered protocol family 10
[17179592.140000] lo: Disabled Privacy Extensions
[17179592.140000] IPv6 over IPv4 tunneling driver
[17179602.692000] eth0: no IPv6 routers present
[17179603.680000] ReiserFS: dm-5: found reiserfs format "3.6" with standard
journal
[17179604.684000] ReiserFS: dm-5: using ordered data mode
[17179604.692000] ReiserFS: dm-5: journal params: device dm-5, size 8192,
journal first block 18, max trans len 1024, max batch 900, max commit age 30,
max trans age 30
[17179604.696000] ReiserFS: dm-5: checking transaction log (dm-5)
[17179604.768000] ReiserFS: dm-5: Using r5 hash to sort names
[17179605.036000] NTFS driver 2.1.27 [Flags: R/O MODULE].
[17179605.096000] NTFS volume version 3.1.
[17179605.144000] NTFS volume version 3.1.
[17179605.188000] NTFS volume version 3.1.
[17179605.224000] Adding 1028088k swap on
/dev/disk/by-uuid/9b87a334-b915-42e2-8b49-df9f07f7a8de. Priority:-2 extents:1
across:1028088k
[17179610.732000] ACPI: Power Button (FF) [PWRF]
[17179610.732000] ACPI: Power Button (CM) [PWRB]
[17179610.732000] ACPI: Sleep Button (CM) [SLPB]
[17179610.884000] ibm_acpi: ec object not found
[17179610.920000] pcc_acpi: loading...
[17179624.592000] fglrx: module license 'Proprietary. (C) 2002 - ATI
Technologies, Starnberg, GERMANY' taints kernel.
[17179624.596000] [fglrx] Maximum main memory to use for locked dma buffers:
680 MBytes.
[17179624.600000] [fglrx] module loaded - fglrx 8.28.8 [Aug 17 2006] on minor 0
[17179624.648000] ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) ->
IRQ 169
[17179625.908000] [fglrx:firegl_unlock] *ERROR* Process 4913 using kernel
context 0
[17179626.348000] ppdev: user-space parallel port driver
[17179627.360000] apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
[17179627.360000] apm: overridden by ACPI.
[17179628.820000] Bluetooth: Core ver 2.8
[17179628.820000] NET: Registered protocol family 31
[17179628.820000] Bluetooth: HCI device and connection manager initialized
[17179628.820000] Bluetooth: HCI socket layer initialized
[17179628.832000] Bluetooth: L2CAP ver 2.8
[17179628.832000] Bluetooth: L2CAP socket layer initialized
[17179628.844000] Bluetooth: RFCOMM socket layer initialized
[17179628.844000] Bluetooth: RFCOMM TTY layer initialized
[17179628.844000] Bluetooth: RFCOMM ver 1.7
[17179640.780000] eth0: no IPv6 routers present
00:00.0 0600: 8086:2560 (rev 01)
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort+ >SERR- <PERR-
Latency: 0
Region 0: Memory at e0000000 (32-bit, prefetchable) [size=64M]
Capabilities: <access denied>
00:01.0 0604: 8086:2561 (rev 01) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR-
Latency: 32
Bus: primary=00, secondary=01, subordinate=02, sec-latency=32
I/O behind bridge: 0000c000-0000cfff
Memory behind bridge: dfc00000-dfdfffff
Prefetchable memory behind bridge: bf800000-df9fffff
Secondary status: 66MHz+ FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity+ SERR- NoISA+ VGA+ MAbort- >Reset- FastB2B-
00:1d.0 0c03: 8086:24c2 (rev 01) (prog-if 00 [UHCI])
Subsystem: 103c:1296
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Interrupt: pin A routed to IRQ 169
Region 4: I/O ports at e400 [size=32]
00:1d.1 0c03: 8086:24c4 (rev 01) (prog-if 00 [UHCI])
Subsystem: 103c:1296
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Interrupt: pin B routed to IRQ 177
Region 4: I/O ports at e800 [size=32]
00:1d.2 0c03: 8086:24c7 (rev 01) (prog-if 00 [UHCI])
Subsystem: 103c:1296
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Interrupt: pin C routed to IRQ 185
Region 4: I/O ports at ec00 [size=32]
00:1d.7 0c03: 8086:24cd (rev 01) (prog-if 20 [EHCI])
Subsystem: 103c:1296
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Interrupt: pin D routed to IRQ 193
Region 0: Memory at dffffc00 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
00:1e.0 0604: 8086:244e (rev 81) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR+
Latency: 0
Bus: primary=00, secondary=03, subordinate=03, sec-latency=32
I/O behind bridge: 0000d000-0000dfff
Memory behind bridge: dfe00000-dfefffff
Prefetchable memory behind bridge: dfa00000-dfafffff
Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B-
00:1f.0 0601: 8086:24c0 (rev 01)
Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 0
00:1f.1 0101: 8086:24cb (rev 01) (prog-if 8a [Master SecP PriP])
Subsystem: 103c:1296
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Interrupt: pin A routed to IRQ 185
Region 0: I/O ports at <unassigned>
Region 1: I/O ports at <unassigned>
Region 2: I/O ports at <unassigned>
Region 3: I/O ports at <unassigned>
Region 4: I/O ports at fc00 [size=16]
Region 5: Memory at 40000000 (32-bit, non-prefetchable) [size=1K]
00:1f.3 0c05: 8086:24c3 (rev 01)
Subsystem: 103c:1296
Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Interrupt: pin B routed to IRQ 0
Region 4: I/O ports at 0c00 [size=32]
01:00.0 0300: 1002:4a54 (prog-if 00 [VGA])
Subsystem: 1002:4422
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 255 (2000ns min), Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 169
Region 0: Memory at d0000000 (32-bit, prefetchable) [size=128M]
Region 1: I/O ports at c800 [size=256]
Region 2: Memory at dfdf0000 (32-bit, non-prefetchable) [size=64K]
Expansion ROM at dfdc0000 [disabled] [size=128K]
Capabilities: <access denied>
01:00.1 0380: 1002:4a74
Subsystem: 1002:4423
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 32 (2000ns min), Cache Line Size: 32 bytes
Region 0: Memory at c8000000 (32-bit, prefetchable) [size=128M]
Region 1: Memory at dfde0000 (32-bit, non-prefetchable) [size=64K]
Capabilities: <access denied>
03:08.0 0200: 8086:1039 (rev 81)
Subsystem: 103c:1296
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr-
Stepping- SERR+ FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 32 (2000ns min, 14000ns max), Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 201
Region 0: Memory at dfeff000 (32-bit, non-prefetchable) [size=4K]
Region 1: I/O ports at d800 [size=64]
Capabilities: <access denied>
03:0b.0 0401: 1102:0002 (rev 08)
Subsystem: 1102:8028
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 32 (500ns min, 5000ns max)
Interrupt: pin A routed to IRQ 177
Region 0: I/O ports at d400 [size=32]
Capabilities: <access denied>
03:0b.1 0980: 1102:7002 (rev 08)
Subsystem: 1102:0020
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 32
Region 0: I/O ports at dc00 [size=8]
Capabilities: <access denied>
--
IDE disks not found
https://bugs.launchpad.net/bugs/97325
You received this bug notification because you are a member of Ubuntu
Bugs, which is the bug contact for Ubuntu.
--
ubuntu-bugs mailing list
[EMAIL PROTECTED]
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
