Ok I understand Tivo remote to be different beast. So I am trying to get hauppauge remote to get working.
I upgraded to 2.6.39 rc5 kernel and still dont see any output on irw. I change protocol to rc-5 for hauppauge remote using following ir-keytable -p RC-5. or echo rc-5 > /sys/class/rc/rc0/protocols. Still nothing with irw. I get some output on ir-keytable -t as follows. Testing events. Please, press CTRL-C to abort. 1304993996.717659: event MSC: scancode = 1e14 1304993996.831658: event MSC: scancode = 1e14 1304993996.944659: event MSC: scancode = 1e14 1304993997.057612: event MSC: scancode = 1e14 1304993997.170613: event MSC: scancode = 1e14 1304993997.283661: event MSC: scancode = 1e14 1304993999.131674: event MSC: scancode = 1e25 1304993999.257630: event MSC: scancode = 1e25 1304993999.358638: event MSC: scancode = 1e25 1304993999.484633: event MSC: scancode = 1e25 1304993999.996684: event MSC: scancode = 1e17 1304994000.122683: event MSC: scancode = 1e17 1304994000.222640: event MSC: scancode = 1e17 1304994000.348641: event MSC: scancode = 1e17 1304994000.860694: event MSC: scancode = 1e1a 1304994000.986683: event MSC: scancode = 1e1a 1304994001.087646: event MSC: scancode = 1e1a # /etc/lirc/hardware.conf # #Chosen Remote Control REMOTE="Hauppauge" REMOTE_MODULES="lirc_dev mceusb" REMOTE_DRIVER="devinput" REMOTE_DEVICE="/dev/input/event6" REMOTE_SOCKET="" REMOTE_LIRCD_CONF="lircd.conf" REMOTE_LIRCD_ARGS="" #Chosen IR Transmitter TRANSMITTER="None" TRANSMITTER_MODULES="" TRANSMITTER_DRIVER="" TRANSMITTER_DEVICE="" TRANSMITTER_SOCKET="" TRANSMITTER_LIRCD_CONF="" TRANSMITTER_LIRCD_ARGS="" #Enable lircd START_LIRCD="true" #Don't start lircmd even if there seems to be a good config file #START_LIRCMD="false" #Try to load appropriate kernel modules LOAD_MODULES="false" lircd.conf # # this config file was automatically generated # using lirc-0.8.3pre1(default) on Sat Jun 21 12:36:46 2008 # # contributed by Matthew Wright # # brand: Hauppauge (HRV-1600 RT Remote) # model no. of remote control: A415-HPG-A # devices being controlled by this remote: # begin remote name Hauppauge bits 13 flags RC5|CONST_LENGTH eps 30 aeps 100 one 919 852 zero 919 852 plead 930 gap 112908 toggle_bit_mask 0x800 begin codes power 0x17BD go 0x17BB tv 0x179C videos 0x1798 music 0x1799 pictures 0x179A guide 0x179B radio 0x178C exit 0x179F menu 0x178D prevch 0x1792 mute 0x178F up 0x1794 down 0x1795 left 0x1796 right 0x1797 ok 0x17A5 volup 0x1790 voldown 0x1791 chup 0x17A0 chdown 0x17A1 record 0x17B7 stop 0x17B6 rewind 0x17B2 fastfwd 0x17B4 play 0x17B5 replay 0x17A4 skip 0x179E pause 0x17B0 end codes end Remote Any suggestions as to how to move forward. Thank you in advance Dhabud -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/778296 Title: lirc not working correctly on 2.6.38 kernel -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs