apport information
** Tags added: apport-collected natty running-unity
** Description changed:
Description: Ubuntu Natty (development branch)
Release: 11.04
lspci -v reports:
01:00.0 VGA compatible controller: nVidia Corporation Device 0df4 (rev a1)
(prog-if 00 [VGA controller])
Subsystem: Micro-Star International Co., Ltd. Device 108d
Flags: bus master, fast devsel, latency 0, IRQ 16
Memory at f6000000 (32-bit, non-prefetchable) [size=16M]
Memory at e0000000 (64-bit, prefetchable) [size=256M]
Memory at f0000000 (64-bit, prefetchable) [size=32M]
I/O ports at e000 [size=128]
Expansion ROM at f7000000 [disabled] [size=512K]
Capabilities: [60] Power Management version 3
Capabilities: [68] MSI: Enable- Count=1/1 Maskable- 64bit+
Capabilities: [78] Express Endpoint, MSI 00
Capabilities: [b4] Vendor Specific Information: Len=14 <?>
Capabilities: [100] Virtual Channel
Capabilities: [128] Power Budgeting <?>
Capabilities: [600] Vendor Specific Information: ID=0001 Rev=1 Len=024
<?>
Kernel driver in use: nouveau
Kernel modules: nouveau, nvidiafb
dmesg shows nouveau is unhappy at kernel boot:
[ 9.774042] VGA switcheroo: detected DSM switching method
\_SB_.PCI0.PEG0.PEGP handle
[ 9.774092] nouveau 0000:01:00.0: power state changed by ACPI to D0
[ 9.774102] nouveau 0000:01:00.0: power state changed by ACPI to D0
[ 9.774111] nouveau 0000:01:00.0: enabling device (0004 -> 0007)
[ 9.774126] nouveau 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ
16
[ 9.774136] nouveau 0000:01:00.0: setting latency timer to 64
[ 9.783616] [drm] nouveau 0000:01:00.0: Detected an NVc0 generation card
(0x0c1a00a1)
[ 9.809626] vga_switcheroo: enabled
[ 9.809653] [drm] nouveau 0000:01:00.0: Attempting to load BIOS image from
PRAMIN
[ 9.819381] [drm] nouveau 0000:01:00.0: ... BIOS signature not found
[ 9.819388] [drm] nouveau 0000:01:00.0: Attempting to load BIOS image from
PROM
[ 9.819401] [drm] nouveau 0000:01:00.0: ... BIOS signature not found
[ 9.819406] [drm] nouveau 0000:01:00.0: Attempting to load BIOS image from
PCIROM
[ 9.829555] nouveau 0000:01:00.0: Invalid ROM contents
[ 9.829773] [drm] nouveau 0000:01:00.0: ... BIOS signature not found
[ 9.829777] [drm] nouveau 0000:01:00.0: Attempting to load BIOS image from
ACPI
[ 21.530360] [drm] nouveau 0000:01:00.0: ... appears to be valid
[ 21.530372] [drm] nouveau 0000:01:00.0: BIT BIOS found
[ 21.530379] [drm] nouveau 0000:01:00.0: Bios version 70.08.45.00
[ 21.530384] [drm] nouveau 0000:01:00.0: Pointer to BIT loadval table
invalid
[ 21.530390] [drm] nouveau 0000:01:00.0: TMDS table version 2.0
[ 21.530396] [drm] nouveau 0000:01:00.0: Found Display Configuration Block
version 4.0
[ 21.530403] [drm] nouveau 0000:01:00.0: Raw DCB entry 0: 02000300 00000000
[ 21.530409] [drm] nouveau 0000:01:00.0: Raw DCB entry 1: 0000000e 00000000
[ 21.530416] [drm] nouveau 0000:01:00.0: DCB connector table: VHER 0x40 5
16 4
[ 21.530422] [drm] nouveau 0000:01:00.0: 0: 0x00000000: type 0x00 idx 0
tag 0xff
[ 21.530441] [drm] nouveau 0000:01:00.0: Adaptor not initialised, running
VBIOS init tables.
[ 21.530446] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 0 at
offset 0xD56E
[ 21.554800] [drm] nouveau 0000:01:00.0: 0xD518: i2c wr fail: -6
[ 21.609641] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 1 at
offset 0xDBBD
[ 21.689613] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 2 at
offset 0xEDC3
[ 21.689629] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 3 at
offset 0xEDC7
[ 21.689696] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 4 at
offset 0xEEAF
[ 21.689702] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table at offset
0xEF14
[ 21.738863] [drm] nouveau 0000:01:00.0: 3 available performance level(s)
[ 21.738876] [drm] nouveau 0000:01:00.0: 0: memory 135MHz core 270MHz
shader 540MHz voltage 830mV
[ 21.738885] [drm] nouveau 0000:01:00.0: 1: memory 405MHz core 270MHz
shader 810MHz voltage 830mV
[ 21.738893] [drm] nouveau 0000:01:00.0: 3: memory 405MHz core 1070MHz
shader 1344MHz voltage 980mV
[ 21.739100] [TTM] Zone kernel: Available graphics memory: 4049570 kiB.
[ 21.739105] [TTM] Zone dma32: Available graphics memory: 2097152 kiB.
[ 21.739110] [TTM] Initializing pool allocator.
[ 21.739141] [drm] nouveau 0000:01:00.0: Detected 512MiB VRAM
[ 21.739169] mtrr: type mismatch for e0000000,10000000 old: write-back new:
write-combining
[ 21.790542] [drm] nouveau 0000:01:00.0: 512 MiB GART (aperture)
[ 21.790556] [drm] nouveau 0000:01:00.0: PGRAPH: unsupported chipset,
please report!
[ 21.790920] [drm] nouveau 0000:01:00.0: PGRAPH: unknown config: 2/0/0/0, 1
[ 21.794342] [drm] nouveau 0000:01:00.0: failed to load fuc409d
[ 21.816925] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[ 21.816931] [drm] No driver support for vblank timestamp query.
[ 21.816946] [drm] nouveau 0000:01:00.0: ACPI backlight interface
available, not registering our own
[ 21.871492] [drm] nouveau 0000:01:00.0: allocated 1024x768 fb: 0x30000000,
bo ffff88021a08a000
[ 21.871616] fb1: nouveaufb frame buffer device
[ 21.871628] [drm] Initialized nouveau 0.0.16 20090420 for 0000:01:00.0 on
minor 1
note at 21.790556:
[ 21.790556] [drm] nouveau 0000:01:00.0: PGRAPH: unsupported chipset,
please report!
[ 21.790920] [drm] nouveau 0000:01:00.0: PGRAPH: unknown config: 2/0/0/0, 1
[ 21.794342] [drm] nouveau 0000:01:00.0: failed to load fuc409d
This laptop also contains an i915 compatible chipset, i think that is
what is actually being used to drive X (using it right now!). However,
nouveau is also loaded, and when I try to resume from sleep, we get a
kernel panic and after 60 seconds the thing actually wakes up again.
Here is the kernel bug report that I get upon resume:
[50940.335903] ata1.00: configured for UDMA/133
[50940.367610] PM: resume of drv:sd dev:0:0:0:0 complete after 893.030 msecs
[50940.367638] PM: resume of drv:scsi_device dev:0:0:0:0 complete after
893.037 msecs
[50940.367645] PM: resume of drv:scsi_disk dev:0:0:0:0 complete after 661.903
msecs
[50999.763605] [drm] nouveau 0000:01:00.0: failed to load fuc409d
[50999.763622] [drm] nouveau 0000:01:00.0: Restoring mode...
[50999.765500] PM: resume of drv:nouveau dev:0000:01:00.0 complete after
60310.203 msecs
[50999.765542] PM: resume of drv:drm dev:controlD65 complete after 59416.870
msecs
[50999.769034] PM: resume of devices complete after 60313.920 msecs
[50999.783750] PM: resume devices took 60.330 seconds
[50999.783752] ------------[ cut here ]------------
[50999.783756] WARNING: at
/build/buildd/linux-2.6.38/kernel/power/suspend_test.c:53
suspend_test_finish+0x86/0x90(
)
[50999.783757] Hardware name: GE620/FX620DX
[50999.783758] Component: resume devices, time: 60330
[50999.783759] Modules linked in: usb_storage uas nls_utf8 udf crc_itu_t
cryptd aes_x86_64 aes_generic binfmt_misc parport_pc ppdev dm_crypt
snd_hda_codec_hdmi snd_hda_codec_realtek snd_hda_intel snd_hda_codec snd_hwdep
snd_pcm snd_seq_midi snd_rawmidi arc4 snd_seq_midi_event ath9k mac80211 snd_seq
ath9k_common snd_timer ath9k_hw snd_seq_device snd joydev ath soundcore
cfg80211 psmouse serio_raw snd_page_alloc uvcvideo videodev v4l2_compat_ioctl32
xhci_hcd lp parport nouveau ttm i915 drm_kms_helper ahci drm libahci r8169
i2c_algo_bit video [last unloaded: kvm]
[50999.783781] Pid: 5164, comm: pm-suspend Not tainted 2.6.38-7-generic
#39-Ubuntu
[50999.783783] Call Trace:
[50999.783787] [<ffffffff8106573f>] ? warn_slowpath_common+0x7f/0xc0
[50999.783790] [<ffffffff81065836>] ? warn_slowpath_fmt+0x46/0x50
[50999.783792] [<ffffffff810a6b76>] ? suspend_test_finish+0x86/0x90
[50999.783793] [<ffffffff810a688c>] ? suspend_devices_and_enter+0xac/0x170
[50999.783795] [<ffffffff810a6a70>] ? enter_state+0x120/0x150
[50999.783797] [<ffffffff810a5ec6>] ? state_store+0xc6/0x100
[50999.783800] [<ffffffff812db737>] ? kobj_attr_store+0x17/0x20
[50999.783803] [<ffffffff811d29ee>] ? sysfs_write_file+0xde/0x160
[50999.783806] [<ffffffff81163b86>] ? vfs_write+0xc6/0x180
[50999.783808] [<ffffffff81163ea1>] ? sys_write+0x51/0x90
[50999.783810] [<ffffffff8100c002>] ? system_call_fastpath+0x16/0x1b
[50999.783812] ---[ end trace 72e7ff443dfc43bb ]---
[50999.783851] PM: Finishing wakeup.
[50999.783851] Restarting tasks ... done.
[50999.785511] video LNXVIDEO:00: Restoring backlight state
[50999.796969] video LNXVIDEO:01: Restoring backlight state
[50999.803475] VFS: busy inodes on changed media or resized disk sr0
[51003.500414] [drm:drm_mode_getfb] *ERROR* invalid framebuffer id
I think this is all really the same root problem, nouveua doesn't
recognise my chipset.
Here's lsmod for good measure, let me know what else you need.
Module Size Used by
usbhid 46956 0
hid 91020 1 usbhid
usb_storage 53538 0
uas 17996 0
nls_utf8 12557 1
udf 93525 1
crc_itu_t 12707 1 udf
cryptd 20510 0
aes_x86_64 17208 5774
aes_generic 38279 1 aes_x86_64
binfmt_misc 17565 1
parport_pc 36959 0
ppdev 17113 0
dm_crypt 22993 0
snd_hda_codec_hdmi 28103 1
snd_hda_codec_realtek 336647 1
snd_hda_intel 33211 2
snd_hda_codec 103804 3
snd_hda_codec_hdmi,snd_hda_codec_realtek,snd_hda_intel
snd_hwdep 13604 1 snd_hda_codec
snd_pcm 96625 3 snd_hda_codec_hdmi,snd_hda_intel,snd_hda_codec
snd_seq_midi 13324 0
snd_rawmidi 30486 1 snd_seq_midi
arc4 12529 2
snd_seq_midi_event 14899 1 snd_seq_midi
ath9k 118238 0
mac80211 294370 1 ath9k
snd_seq 61621 2 snd_seq_midi,snd_seq_midi_event
ath9k_common 13851 1 ath9k
snd_timer 29602 2 snd_pcm,snd_seq
ath9k_hw 323122 2 ath9k,ath9k_common
snd_seq_device 14462 3 snd_seq_midi,snd_rawmidi,snd_seq
snd 67382 14
snd_hda_codec_hdmi,snd_hda_codec_realtek,snd_hda_intel,snd_hda_codec,snd_hwdep,snd_pcm,snd_rawmidi,snd_seq,snd_timer,snd_seq_device
joydev 17606 0
ath 23773 2 ath9k,ath9k_hw
soundcore 12680 1 snd
cfg80211 178528 3 ath9k,mac80211,ath
psmouse 73535 0
serio_raw 13166 0
snd_page_alloc 18529 2 snd_hda_intel,snd_pcm
uvcvideo 68099 0
videodev 82052 1 uvcvideo
v4l2_compat_ioctl32 17078 1 videodev
xhci_hcd 77602 0
lp 17825 0
parport 46458 3 parport_pc,ppdev,lp
nouveau 682322 0
ttm 76664 1 nouveau
i915 514985 3
drm_kms_helper 42136 2 nouveau,i915
ahci 25951 3
drm 227573 6 nouveau,ttm,i915,drm_kms_helper
libahci 26642 1 ahci
r8169 48022 0
i2c_algo_bit 13400 2 nouveau,i915
video 19438 2 nouveau,i915
Thanks,
John
+ ---
+ AlsaVersion: Advanced Linux Sound Architecture Driver Version 1.0.23.
+ Architecture: amd64
+ ArecordDevices:
+ **** List of CAPTURE Hardware Devices ****
+ card 0: PCH [HDA Intel PCH], device 0: ALC892 Analog [ALC892 Analog]
+ Subdevices: 1/1
+ Subdevice #0: subdevice #0
+ AudioDevicesInUse:
+ USER PID ACCESS COMMAND
+ /dev/snd/controlC0: jwilliams 2263 F.... pulseaudio
+ /dev/snd/pcmC0D0p: jwilliams 2263 F...m pulseaudio
+ CRDA: Error: [Errno 2] No such file or directory
+ Card0.Amixer.info:
+ Card hw:0 'PCH'/'HDA Intel PCH at 0xf7e00000 irq 55'
+ Mixer name : 'Intel CougarPoint HDMI'
+ Components : 'HDA:10ec0892,1462108d,00100302
HDA:80862805,1462108d,00100000'
+ Controls : 25
+ Simple ctrls : 13
+ DistroRelease: Ubuntu 11.04
+ EcryptfsInUse: Yes
+ HibernationDevice: RESUME=UUID=29faa943-3489-460f-8ae2-28c408d5e7e0
+ InstallationMedia: Ubuntu 11.04 "Natty Narwhal" - Beta amd64 (20110330)
+ MachineType: Micro-Star International GE620/FX620DX
+ Package: linux (not installed)
+ ProcEnviron:
+ SHELL=/bin/bash
+ PATH=(custom, no user)
+ LANG=en_AU.UTF-8
+ LANGUAGE=en_AU:en
+ ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-2.6.38-8-generic
root=UUID=1447ddf8-71dc-4b8c-bc8c-83768a9d94ca ro quiet splash vt.handoff=7
+ ProcVersionSignature: Ubuntu 2.6.38-8.42-generic 2.6.38.2
+ RelatedPackageVersions:
+ linux-restricted-modules-2.6.38-8-generic N/A
+ linux-backports-modules-2.6.38-8-generic N/A
+ linux-firmware 1.52
+ RfKill:
+ 0: phy0: Wireless LAN
+ Soft blocked: no
+ Hard blocked: yes
+ Tags: natty running-unity
+ Uname: Linux 2.6.38-8-generic x86_64
+ UpgradeStatus: No upgrade log present (probably fresh install)
+ UserGroups: adm admin cdrom dialout libvirtd lpadmin plugdev sambashare
+ dmi.bios.date: 03/09/2011
+ dmi.bios.vendor: American Megatrends Inc.
+ dmi.bios.version: E16G5IMS V.10A
+ dmi.board.asset.tag: To be filled by O.E.M.
+ dmi.board.name: GE620/FX620DX
+ dmi.board.vendor: Micro-Star International
+ dmi.board.version: To be filled by O.E.M.
+ dmi.chassis.asset.tag: To Be Filled By O.E.M.
+ dmi.chassis.type: 10
+ dmi.chassis.vendor: Micro-Star International
+ dmi.chassis.version: To be filled by O.E.M.
+ dmi.modalias:
dmi:bvnAmericanMegatrendsInc.:bvrE16G5IMSV.10A:bd03/09/2011:svnMicro-StarInternational:pnGE620/FX620DX:pvrTobefilledbyO.E.M.:rvnMicro-StarInternational:rnGE620/FX620DX:rvrTobefilledbyO.E.M.:cvnMicro-StarInternational:ct10:cvrTobefilledbyO.E.M.:
+ dmi.product.name: GE620/FX620DX
+ dmi.product.version: To be filled by O.E.M.
+ dmi.sys.vendor: Micro-Star International
** Attachment added: "AcpiTables.txt"
https://bugs.launchpad.net/bugs/770650/+attachment/2215790/+files/AcpiTables.txt
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/770650
Title:
nouveau fails to recognise nvidia chipset in MSI GE620/FX620DX laptop,
causes suspend/resume failures
To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/linux/+bug/770650/+subscriptions
--
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
