Thanks and sorry mate, I am new to reporting bugs etc.

On 16 August 2011 13:39, Bryan Quigley <gqu...@gmail.com> wrote:

> Hi, Thanks for taking the time to report this bug.
>
> It was originally reported against evince but I've changed that as you
> don't describe anything wrong with Evince.
>
> A good first try is to turn off Compiz.  System -> Preferences ->
> Appearance | Effects I think
>
> ** Package changed: evince (Ubuntu) => ubuntu
>
> --
> You received this bug notification because you are subscribed to the bug
> report.
> https://bugs.launchpad.net/bugs/827080
>
> Title:
>  System Freeze Every Start-Up
>
> Status in Ubuntu:
>   New
>
> Bug description:
>  Every Start-Up of Ubuntu Maverick Meerkat (10.10) on my Toshiba
>  Satellite Laptop, the whole system freezes a few minutes after Logging
>  in. This is about the time I have to open Firefox (but the problem
>  occurs even if I do not open any software). SysRq+Alt+REISUB has no
>  effect so I have to do a hard restart.  This usually fixes the problem
>  (when I log-in again) but sometimes I have to restart in this manner
>  two or three times. I think it maybe a GUI issue.
>
>  Any suggestions?
>
>  Here is my Xorg.0.log file
>
>  [  3802.073]
>  X.Org X Server 1.9.0
>  Release Date: 2010-08-20
>  [  3802.073] X Protocol Version 11, Revision 0
>  [  3802.073] Build Operating System: Linux 2.6.24-27-server i686 Ubuntu
>  [  3802.073] Current Operating System: Linux rafa-Satellite-A200
> 2.6.35-30-generic #56-Ubuntu SMP Mon Jul 11 20:00:22 UTC 2011 i686
>  [  3802.073] Kernel command line:
> BOOT_IMAGE=/boot/vmlinuz-2.6.35-30-generic
> root=UUID=773bb190-033f-4f1c-9b77-a6d9ac32ee46 ro quiet splash
>  [  3802.073] Build Date: 16 September 2010  05:39:22PM
>  [  3802.073] xorg-server 2:1.9.0-0ubuntu7 (For technical support please
> see http://www.ubuntu.com/support)
>  [  3802.073] Current version of pixman: 0.18.4
>  [  3802.073]  Before reporting problems, check http://wiki.x.org
>        to make sure that you have the latest version.
>  [  3802.073] Markers: (--) probed, (**) from config file, (==) default
> setting,
>        (++) from command line, (!!) notice, (II) informational,
>        (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
>  [  3802.074] (==) Log file: "/var/log/Xorg.0.log", Time: Tue Aug 16
> 12:53:23 2011
>  [  3802.074] (==) Using system config directory
> "/usr/share/X11/xorg.conf.d"
>  [  3802.147] (==) No Layout section.  Using the first Screen section.
>  [  3802.147] (==) No screen section available. Using defaults.
>  [  3802.147] (**) |-->Screen "Default Screen Section" (0)
>  [  3802.147] (**) |   |-->Monitor "<default monitor>"
>  [  3802.147] (==) No monitor specified for screen "Default Screen
> Section".
>        Using a default monitor configuration.
>  [  3802.147] (==) Automatically adding devices
>  [  3802.148] (==) Automatically enabling devices
>  [  3802.149] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not
> exist.
>  [  3802.149]  Entry deleted from font path.
>  [  3802.150] (==) FontPath set to:
>        /usr/share/fonts/X11/misc,
>        /usr/share/fonts/X11/100dpi/:unscaled,
>        /usr/share/fonts/X11/75dpi/:unscaled,
>        /usr/share/fonts/X11/Type1,
>        /usr/share/fonts/X11/100dpi,
>        /usr/share/fonts/X11/75dpi,
>        /var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType,
>        built-ins
>  [  3802.150] (==) ModulePath set to
> "/usr/lib/xorg/extra-modules,/usr/lib/xorg/modules"
>  [  3802.150] (II) The server relies on udev to provide the list of input
> devices.
>        If no devices become available, reconfigure udev or disable
> AutoAddDevices.
>  [  3802.150] (II) Loader magic: 0x81f8e00
>  [  3802.150] (II) Module ABI versions:
>  [  3802.150]  X.Org ANSI C Emulation: 0.4
>  [  3802.150]  X.Org Video Driver: 8.0
>  [  3802.150]  X.Org XInput driver : 11.0
>  [  3802.150]  X.Org Server Extension : 4.0
>  [  3802.152] (--) PCI:*(0:0:2:0) 8086:27a2:1179:ff10 rev 3, Mem @
> 0xf0a00000/524288, 0xd0000000/268435456, 0xf0b00000/262144, I/O @
> 0x00001800/8
>  [  3802.152] (--) PCI: (0:0:2:1) 8086:27a6:1179:ff10 rev 3, Mem @
> 0xf0a80000/524288
>  [  3802.153] (II) Open ACPI successful (/var/run/acpid.socket)
>  [  3802.153] (II) LoadModule: "extmod"
>  [  3802.154] (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
>  [  3802.154] (II) Module extmod: vendor="X.Org Foundation"
>  [  3802.154]  compiled for 1.9.0, module version = 1.0.0
>  [  3802.154]  Module class: X.Org Server Extension
>  [  3802.154]  ABI class: X.Org Server Extension, version 4.0
>  [  3802.154] (II) Loading extension MIT-SCREEN-SAVER
>  [  3802.154] (II) Loading extension XFree86-VidModeExtension
>  [  3802.154] (II) Loading extension XFree86-DGA
>  [  3802.154] (II) Loading extension DPMS
>  [  3802.154] (II) Loading extension XVideo
>  [  3802.154] (II) Loading extension XVideo-MotionCompensation
>  [  3802.154] (II) Loading extension X-Resource
>  [  3802.154] (II) LoadModule: "dbe"
>  [  3802.155] (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
>  [  3802.219] (II) Module dbe: vendor="X.Org Foundation"
>  [  3802.220]  compiled for 1.9.0, module version = 1.0.0
>  [  3802.220]  Module class: X.Org Server Extension
>  [  3802.220]  ABI class: X.Org Server Extension, version 4.0
>  [  3802.220] (II) Loading extension DOUBLE-BUFFER
>  [  3802.220] (II) LoadModule: "glx"
>  [  3802.221] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
>  [  3802.221] (II) Module glx: vendor="X.Org Foundation"
>  [  3802.221]  compiled for 1.9.0, module version = 1.0.0
>  [  3802.221]  ABI class: X.Org Server Extension, version 4.0
>  [  3802.221] (==) AIGLX enabled
>  [  3802.221] (II) Loading extension GLX
>  [  3802.221] (II) LoadModule: "record"
>  [  3802.223] (II) Loading /usr/lib/xorg/modules/extensions/librecord.so
>  [  3802.231] (II) Module record: vendor="X.Org Foundation"
>  [  3802.231]  compiled for 1.9.0, module version = 1.13.0
>  [  3802.231]  Module class: X.Org Server Extension
>  [  3802.231]  ABI class: X.Org Server Extension, version 4.0
>  [  3802.231] (II) Loading extension RECORD
>  [  3802.231] (II) LoadModule: "dri"
>  [  3802.232] (II) Loading /usr/lib/xorg/modules/extensions/libdri.so
>  [  3802.240] (II) Module dri: vendor="X.Org Foundation"
>  [  3802.240]  compiled for 1.9.0, module version = 1.0.0
>  [  3802.240]  ABI class: X.Org Server Extension, version 4.0
>  [  3802.240] (II) Loading extension XFree86-DRI
>  [  3802.240] (II) LoadModule: "dri2"
>  [  3802.242] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
>  [  3802.242] (II) Module dri2: vendor="X.Org Foundation"
>  [  3802.242]  compiled for 1.9.0, module version = 1.2.0
>  [  3802.242]  ABI class: X.Org Server Extension, version 4.0
>  [  3802.242] (II) Loading extension DRI2
>  [  3802.242] (==) Matched intel as autoconfigured driver 0
>  [  3802.242] (==) Matched vesa as autoconfigured driver 1
>  [  3802.242] (==) Matched fbdev as autoconfigured driver 2
>  [  3802.242] (==) Assigned the driver to the xf86ConfigLayout
>  [  3802.242] (II) LoadModule: "intel"
>  [  3802.243] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
>  [  3802.253] (II) Module intel: vendor="X.Org Foundation"
>  [  3802.253]  compiled for 1.9.0, module version = 2.12.0
>  [  3802.253]  Module class: X.Org Video Driver
>  [  3802.253]  ABI class: X.Org Video Driver, version 8.0
>  [  3802.253] (II) LoadModule: "vesa"
>  [  3802.254] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
>  [  3802.258] (II) Module vesa: vendor="X.Org Foundation"
>  [  3802.258]  compiled for 1.8.99.905, module version = 2.3.0
>  [  3802.258]  Module class: X.Org Video Driver
>  [  3802.258]  ABI class: X.Org Video Driver, version 8.0
>  [  3802.258] (II) LoadModule: "fbdev"
>  [  3802.259] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so
>  [  3802.269] (II) Module fbdev: vendor="X.Org Foundation"
>  [  3802.269]  compiled for 1.8.99.905, module version = 0.4.2
>  [  3802.269]  ABI class: X.Org Video Driver, version 8.0
>  [  3802.269] (II) intel: Driver for Intel Integrated Graphics Chipsets:
> i810,
>        i810-dc100, i810e, i815, i830M, 845G, 852GM/855GM, 865G, 915G,
>        E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM, Pineview G,
>        965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33, GM45,
>        4 Series, G45/G43, Q45/Q43, G41, B43, B43, Clarkdale, Arrandale,
>        Sandybridge, Sandybridge, Sandybridge, Sandybridge, Sandybridge,
>        Sandybridge, Sandybridge
>  [  3802.271] (II) VESA: driver for VESA chipsets: vesa
>  [  3802.271] (II) FBDEV: driver for framebuffer: fbdev
>  [  3802.271] (--) using VT number 8
>
>  [  3802.284] (WW) Falling back to old probe method for vesa
>  [  3802.284] (WW) Falling back to old probe method for fbdev
>  [  3802.284] (II) Loading sub module "fbdevhw"
>  [  3802.284] (II) LoadModule: "fbdevhw"
>  [  3802.285] (II) Loading /usr/lib/xorg/modules/libfbdevhw.so
>  [  3802.333] (II) Module fbdevhw: vendor="X.Org Foundation"
>  [  3802.334]  compiled for 1.9.0, module version = 0.0.2
>  [  3802.334]  ABI class: X.Org Video Driver, version 8.0
>  [  3802.371] drmOpenDevice: node name is /dev/dri/card0
>  [  3802.372] drmOpenDevice: open result is 9, (OK)
>  [  3802.372] drmOpenByBusid: Searching for BusID pci:0000:00:02.0
>  [  3802.372] drmOpenDevice: node name is /dev/dri/card0
>  [  3802.372] drmOpenDevice: open result is 9, (OK)
>  [  3802.372] drmOpenByBusid: drmOpenMinor returns 9
>  [  3802.372] drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0
>  [  3802.372] (II) intel(0): Creating default Display subsection in Screen
> section
>        "Default Screen Section" for depth/fbbpp 24/32
>  [  3802.372] (==) intel(0): Depth 24, (--) framebuffer bpp 32
>  [  3802.372] (==) intel(0): RGB weight 888
>  [  3802.372] (==) intel(0): Default visual is TrueColor
>  [  3802.372] (II) intel(0): Integrated Graphics Chipset: Intel(R) 945GM
>  [  3802.372] (--) intel(0): Chipset: "945GM"
>  [  3802.372] (==) intel(0): video overlay key set to 0x101fe
>  [  3802.405] (II) intel(0): Output VGA1 has no monitor section
>  [  3802.405] (II) intel(0): Output LVDS1 has no monitor section
>  [  3802.405] (II) intel(0): found backlight control interface
> /sys/class/backlight/acpi_video0
>  [  3802.692] (II) intel(0): Output TV1 has no monitor section
>  [  3802.724] (II) intel(0): EDID for output VGA1
>  [  3802.724] (II) intel(0): EDID for output LVDS1
>  [  3802.724] (II) intel(0): Manufacturer: SHP  Model: 13ce  Serial#: 0
>  [  3802.724] (II) intel(0): Year: 1990  Week: 0
>  [  3802.724] (II) intel(0): EDID Version: 1.3
>  [  3802.724] (II) intel(0): Digital Display Input
>  [  3802.724] (II) intel(0): Max Image Size [cm]: horiz.: 33  vert.: 21
>  [  3802.724] (II) intel(0): Gamma: 2.20
>  [  3802.724] (II) intel(0): DPMS capabilities: StandBy Suspend
>  [  3802.724] (II) intel(0): Supported color encodings: RGB 4:4:4 YCrCb
> 4:4:4
>  [  3802.724] (II) intel(0): First detailed timing is preferred mode
>  [  3802.724] (II) intel(0): redX: 0.000 redY: 0.000   greenX: 0.000
> greenY: 0.000
>  [  3802.724] (II) intel(0): blueX: 0.000 blueY: 0.000   whiteX: 0.000
> whiteY: 0.000
>  [  3802.724] (II) intel(0): Manufacturer's mask: 0
>  [  3802.724] (II) intel(0): Supported detailed timing:
>  [  3802.724] (II) intel(0): clock: 71.0 MHz   Image Size:  331 x 207 mm
>  [  3802.725] (II) intel(0): h_active: 1280  h_sync: 1328  h_sync_end 1360
> h_blank_end 1440 h_border: 0
>  [  3802.725] (II) intel(0): v_active: 800  v_sync: 803  v_sync_end 809
> v_blanking: 823 v_border: 0
>  [  3802.725] (II) intel(0): EDID (in hex):
>  [  3802.725] (II) intel(0):   00ffffffffffff004d10ce1300000000
>  [  3802.725] (II) intel(0):   0000010380211578ca00000000000000
>  [  3802.725] (II) intel(0):   00000000000001010101010101010101
>  [  3802.725] (II) intel(0):   010101010101bc1b00a0502017303020
>  [  3802.725] (II) intel(0):   36004bcf100000190000001000000000
>  [  3802.725] (II) intel(0):   00000000000000000a20000000100000
>  [  3802.725] (II) intel(0):   000000000000000000000a2000000010
>  [  3802.725] (II) intel(0):   004c513135344b314c423143200a0062
>  [  3802.726] (II) intel(0): Not using default mode "320x240" (doublescan
> mode not supported)
>  [  3802.726] (II) intel(0): Not using default mode "400x300" (doublescan
> mode not supported)
>  [  3802.726] (II) intel(0): Not using default mode "400x300" (doublescan
> mode not supported)
>  [  3802.726] (II) intel(0): Not using default mode "512x384" (doublescan
> mode not supported)
>  [  3802.726] (II) intel(0): Not using default mode "640x480" (doublescan
> mode not supported)
>  [  3802.726] (II) intel(0): Not using default mode "640x512" (doublescan
> mode not supported)
>  [  3802.726] (II) intel(0): Not using default mode "800x600" (doublescan
> mode not supported)
>  [  3802.726] (II) intel(0): Not using default mode "896x672" (doublescan
> mode not supported)
>  [  3802.726] (II) intel(0): Not using default mode "928x696" (doublescan
> mode not supported)
>  [  3802.726] (II) intel(0): Not using default mode "960x720" (doublescan
> mode not supported)
>  [  3802.726] (II) intel(0): Not using default mode "576x432" (doublescan
> mode not supported)
>  [  3802.726] (II) intel(0): Not using default mode "680x384" (doublescan
> mode not supported)
>  [  3802.726] (II) intel(0): Not using default mode "680x384" (doublescan
> mode not supported)
>  [  3802.726] (II) intel(0): Not using default mode "700x525" (doublescan
> mode not supported)
>  [  3802.726] (II) intel(0): Not using default mode "720x450" (doublescan
> mode not supported)
>  [  3802.726] (II) intel(0): Not using default mode "800x512" (doublescan
> mode not supported)
>  [  3802.726] (II) intel(0): Not using default mode "840x525" (doublescan
> mode not supported)
>  [  3802.726] (II) intel(0): Not using default mode "840x525" (doublescan
> mode not supported)
>  [  3802.726] (II) intel(0): Not using default mode "960x540" (doublescan
> mode not supported)
>  [  3802.726] (II) intel(0): Not using default mode "960x600" (doublescan
> mode not supported)
>  [  3802.726] (II) intel(0): Not using default mode "1024x768" (doublescan
> mode not supported)
>  [  3802.726] (II) intel(0): Printing probed modes for output LVDS1
>  [  3802.726] (II) intel(0): Modeline "1280x800"x59.9   71.00  1280 1328
> 1360 1440  800 803 809 823 -hsync -vsync (49.3 kHz)
>  [  3802.727] (II) intel(0): Modeline "1024x768"x60.0   65.00  1024 1048
> 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz)
>  [  3802.727] (II) intel(0): Modeline "800x600"x60.3   40.00  800 840 968
> 1056  600 601 605 628 +hsync +vsync (37.9 kHz)
>  [  3802.727] (II) intel(0): Modeline "800x600"x56.2   36.00  800 824 896
> 1024  600 601 603 625 +hsync +vsync (35.2 kHz)
>  [  3802.727] (II) intel(0): Modeline "640x480"x59.9   25.18  640 656 752
> 800  480 490 492 525 -hsync -vsync (31.5 kHz)
>  [  3803.012] (II) intel(0): EDID for output TV1
>  [  3803.012] (II) intel(0): Output VGA1 disconnected
>  [  3803.012] (II) intel(0): Output LVDS1 connected
>  [  3803.012] (II) intel(0): Output TV1 disconnected
>  [  3803.012] (II) intel(0): Using exact sizes for initial modes
>  [  3803.012] (II) intel(0): Output LVDS1 using initial mode 1280x800
>  [  3803.012] (II) intel(0): Using default gamma of (1.0, 1.0, 1.0) unless
> otherwise stated.
>  [  3803.012] (II) intel(0): Kernel page flipping support detected, but
> forcibly disabled.
>  [  3803.012] (==) intel(0): DPI set to (96, 96)
>  [  3803.012] (II) Loading sub module "fb"
>  [  3803.012] (II) LoadModule: "fb"
>  [  3803.013] (II) Loading /usr/lib/xorg/modules/libfb.so
>  [  3803.038] (II) Module fb: vendor="X.Org Foundation"
>  [  3803.038]  compiled for 1.9.0, module version = 1.0.0
>  [  3803.038]  ABI class: X.Org ANSI C Emulation, version 0.4
>  [  3803.038] (II) UnloadModule: "vesa"
>  [  3803.038] (II) Unloading /usr/lib/xorg/modules/drivers/vesa_drv.so
>  [  3803.038] (II) UnloadModule: "fbdev"
>  [  3803.039] (II) Unloading /usr/lib/xorg/modules/drivers/fbdev_drv.so
>  [  3803.039] (II) UnloadModule: "fbdevhw"
>  [  3803.039] (II) Unloading /usr/lib/xorg/modules/libfbdevhw.so
>  [  3803.039] (==) Depth 24 pixmap format is 32 bpp
>  [  3803.039] (II) intel(0): [DRI2] Setup complete
>  [  3803.039] (II) intel(0): [DRI2]   DRI driver: i915
>  [  3803.039] (**) intel(0): Tiling enabled
>  [  3803.039] (**) intel(0): SwapBuffers wait enabled
>  [  3803.039] (==) intel(0): VideoRam: 262144 KB
>  [  3803.039] (II) intel(0): Allocated new frame buffer 1280x800 stride
> 8192, tiled
>  [  3803.039] (II) UXA(0): Driver registered support for the following
> operations:
>  [  3803.039] (II)         solid
>  [  3803.039] (II)         copy
>  [  3803.039] (II)         composite (RENDER acceleration)
>  [  3803.039] (II)         put_image
>  [  3803.039] (II)         get_image
>  [  3803.039] (==) intel(0): Backing store disabled
>  [  3803.040] (==) intel(0): Silken mouse enabled
>  [  3803.040] (II) intel(0): Initializing HW Cursor
>  [  3803.100] (II) intel(0): RandR 1.2 enabled, ignore the following RandR
> disabled message.
>  [  3803.103] (==) intel(0): DPMS enabled
>  [  3803.103] (==) intel(0): Intel XvMC decoder disabled
>  [  3803.103] (II) intel(0): Set up textured video
>  [  3803.103] (II) intel(0): Set up overlay video
>  [  3803.104] (II) intel(0): direct rendering: DRI2 Enabled
>  [  3803.104] (--) RandR disabled
>  [  3803.104] (II) Initializing built-in extension Generic Event Extension
>  [  3803.104] (II) Initializing built-in extension SHAPE
>  [  3803.104] (II) Initializing built-in extension MIT-SHM
>  [  3803.104] (II) Initializing built-in extension XInputExtension
>  [  3803.104] (II) Initializing built-in extension XTEST
>  [  3803.104] (II) Initializing built-in extension BIG-REQUESTS
>  [  3803.104] (II) Initializing built-in extension SYNC
>  [  3803.104] (II) Initializing built-in extension XKEYBOARD
>  [  3803.104] (II) Initializing built-in extension XC-MISC
>  [  3803.104] (II) Initializing built-in extension SECURITY
>  [  3803.104] (II) Initializing built-in extension XINERAMA
>  [  3803.104] (II) Initializing built-in extension XFIXES
>  [  3803.104] (II) Initializing built-in extension RENDER
>  [  3803.104] (II) Initializing built-in extension RANDR
>  [  3803.104] (II) Initializing built-in extension COMPOSITE
>  [  3803.104] (II) Initializing built-in extension DAMAGE
>  [  3803.104] (II) Initializing built-in extension GESTURE
>  [  3803.128] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
>  [  3803.128] (II) AIGLX: enabled GLX_INTEL_swap_event
>  [  3803.128] (II) AIGLX: enabled GLX_SGI_swap_control and
> GLX_MESA_swap_control
>  [  3803.128] (II) AIGLX: enabled GLX_SGI_make_current_read
>  [  3803.128] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer
> objects
>  [  3803.128] (II) AIGLX: Loaded and initialized /usr/lib/dri/i915_dri.so
>  [  3803.128] (II) GLX: Initialized DRI2 GL provider for screen 0
>  [  3803.129] (II) intel(0): Setting screen physical size to 338 x 211
>  [  3803.284] (II) XKB: reuse xkmfile
> /var/lib/xkb/server-B20D7FC79C7F597315E3E501AEF10E0D866E8E92.xkm
>  [  3803.323] (II) config/udev: Adding input device Power Button
> (/dev/input/event2)
>  [  3803.323] (**) Power Button: Applying InputClass "evdev keyboard
> catchall"
>  [  3803.323] (II) LoadModule: "evdev"
>  [  3803.323] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
>  [  3803.364] (II) Module evdev: vendor="X.Org Foundation"
>  [  3803.364]  compiled for 1.9.0, module version = 2.3.2
>  [  3803.364]  Module class: X.Org XInput Driver
>  [  3803.364]  ABI class: X.Org XInput driver, version 11.0
>  [  3803.364] (**) Power Button: always reports core events
>  [  3803.364] (**) Power Button: Device: "/dev/input/event2"
>  [  3803.364] (II) Power Button: Found keys
>  [  3803.364] (II) Power Button: Configuring as keyboard
>  [  3803.365] (II) XINPUT: Adding extended input device "Power Button"
> (type: KEYBOARD)
>  [  3803.365] (**) Option "xkb_rules" "evdev"
>  [  3803.365] (**) Option "xkb_model" "pc105"
>  [  3803.365] (**) Option "xkb_layout" "us"
>  [  3803.367] (II) config/udev: Adding input device Video Bus
> (/dev/input/event4)
>  [  3803.367] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
>  [  3803.367] (**) Video Bus: always reports core events
>  [  3803.367] (**) Video Bus: Device: "/dev/input/event4"
>  [  3803.377] (II) Video Bus: Found keys
>  [  3803.377] (II) Video Bus: Configuring as keyboard
>  [  3803.377] (II) XINPUT: Adding extended input device "Video Bus" (type:
> KEYBOARD)
>  [  3803.377] (**) Option "xkb_rules" "evdev"
>  [  3803.377] (**) Option "xkb_model" "pc105"
>  [  3803.377] (**) Option "xkb_layout" "us"
>  [  3803.383] (II) config/udev: Adding input device Power Button
> (/dev/input/event1)
>  [  3803.383] (**) Power Button: Applying InputClass "evdev keyboard
> catchall"
>  [  3803.383] (**) Power Button: always reports core events
>  [  3803.383] (**) Power Button: Device: "/dev/input/event1"
>  [  3803.393] (II) Power Button: Found keys
>  [  3803.393] (II) Power Button: Configuring as keyboard
>  [  3803.393] (II) XINPUT: Adding extended input device "Power Button"
> (type: KEYBOARD)
>  [  3803.393] (**) Option "xkb_rules" "evdev"
>  [  3803.393] (**) Option "xkb_model" "pc105"
>  [  3803.393] (**) Option "xkb_layout" "us"
>  [  3803.394] (II) config/udev: Adding input device Lid Switch
> (/dev/input/event0)
>  [  3803.394] (II) No input driver/identifier specified (ignoring)
>  [  3803.407] (II) config/udev: Adding input device AT Translated Set 2
> keyboard (/dev/input/event3)
>  [  3803.407] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev
> keyboard catchall"
>  [  3803.407] (**) AT Translated Set 2 keyboard: always reports core events
>  [  3803.407] (**) AT Translated Set 2 keyboard: Device:
> "/dev/input/event3"
>  [  3803.421] (II) AT Translated Set 2 keyboard: Found keys
>  [  3803.421] (II) AT Translated Set 2 keyboard: Configuring as keyboard
>  [  3803.421] (II) XINPUT: Adding extended input device "AT Translated Set
> 2 keyboard" (type: KEYBOARD)
>  [  3803.421] (**) Option "xkb_rules" "evdev"
>  [  3803.421] (**) Option "xkb_model" "pc105"
>  [  3803.421] (**) Option "xkb_layout" "us"
>  [  3803.422] (II) config/udev: Adding input device SynPS/2 Synaptics
> TouchPad (/dev/input/event5)
>  [  3803.422] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "evdev
> touchpad catchall"
>  [  3803.422] (**) SynPS/2 Synaptics TouchPad: Applying InputClass
> "touchpad catchall"
>  [  3803.422] (II) LoadModule: "synaptics"
>  [  3803.423] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
>  [  3803.434] (II) Module synaptics: vendor="X.Org Foundation"
>  [  3803.434]  compiled for 1.9.0, module version = 1.2.2
>  [  3803.434]  Module class: X.Org XInput Driver
>  [  3803.434]  ABI class: X.Org XInput driver, version 11.0
>  [  3803.434] (II) Synaptics touchpad driver version 1.2.2
>  [  3803.434] (**) Option "Device" "/dev/input/event5"
>  [  3803.445] (II) SynPS/2 Synaptics TouchPad: x-axis range 1472 - 5472
>  [  3803.445] (II) SynPS/2 Synaptics TouchPad: y-axis range 1408 - 4448
>  [  3803.445] (II) SynPS/2 Synaptics TouchPad: pressure range 0 - 255
>  [  3803.445] (II) SynPS/2 Synaptics TouchPad: finger width range 0 - 0
>  [  3803.445] (II) SynPS/2 Synaptics TouchPad: buttons: left right double
> triple
>  [  3803.448] (--) SynPS/2 Synaptics TouchPad: touchpad found
>  [  3803.448] (**) SynPS/2 Synaptics TouchPad: always reports core events
>  [  3803.453] (II) XINPUT: Adding extended input device "SynPS/2 Synaptics
> TouchPad" (type: TOUCHPAD)
>  [  3803.453] (**) SynPS/2 Synaptics TouchPad: (accel) keeping acceleration
> scheme 1
>  [  3803.453] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration profile
> 0
>  [  3803.453] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration factor:
> 2.000
>  [  3803.453] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration
> threshold: 4
>  [  3803.456] (--) SynPS/2 Synaptics TouchPad: touchpad found
>  [  3803.456] (II) config/udev: Adding input device SynPS/2 Synaptics
> TouchPad (/dev/input/mouse0)
>  [  3803.456] (II) No input driver/identifier specified (ignoring)
>  [  3804.324] (II) intel(0): EDID vendor "SHP", prod id 5070
>  [  3804.324] (II) intel(0): Printing DDC gathered Modelines:
>  [  3804.324] (II) intel(0): Modeline "1280x800"x0.0   71.00  1280 1328
> 1360 1440  800 803 809 823 -hsync -vsync (49.3 kHz)
>  [  3804.644] (II) intel(0): EDID vendor "SHP", prod id 5070
>  [  3804.644] (II) intel(0): Printing DDC gathered Modelines:
>  [  3804.644] (II) intel(0): Modeline "1280x800"x0.0   71.00  1280 1328
> 1360 1440  800 803 809 823 -hsync -vsync (49.3 kHz)
>  [  3804.968] (II) intel(0): EDID vendor "SHP", prod id 5070
>  [  3804.968] (II) intel(0): Printing DDC gathered Modelines:
>  [  3804.968] (II) intel(0): Modeline "1280x800"x0.0   71.00  1280 1328
> 1360 1440  800 803 809 823 -hsync -vsync (49.3 kHz)
>  [  3805.292] (II) intel(0): EDID vendor "SHP", prod id 5070
>  [  3805.292] (II) intel(0): Printing DDC gathered Modelines:
>  [  3805.292] (II) intel(0): Modeline "1280x800"x0.0   71.00  1280 1328
> 1360 1440  800 803 809 823 -hsync -vsync (49.3 kHz)
>  [  3812.641] (II) intel(0): EDID vendor "SHP", prod id 5070
>  [  3812.641] (II) intel(0): Printing DDC gathered Modelines:
>  [  3812.641] (II) intel(0): Modeline "1280x800"x0.0   71.00  1280 1328
> 1360 1440  800 803 809 823 -hsync -vsync (49.3 kHz)
>  [  3812.968] (II) intel(0): EDID vendor "SHP", prod id 5070
>  [  3812.968] (II) intel(0): Printing DDC gathered Modelines:
>  [  3812.968] (II) intel(0): Modeline "1280x800"x0.0   71.00  1280 1328
> 1360 1440  800 803 809 823 -hsync -vsync (49.3 kHz)
>  [  3813.292] (II) intel(0): EDID vendor "SHP", prod id 5070
>  [  3813.292] (II) intel(0): Printing DDC gathered Modelines:
>  [  3813.292] (II) intel(0): Modeline "1280x800"x0.0   71.00  1280 1328
> 1360 1440  800 803 809 823 -hsync -vsync (49.3 kHz)
>  [  3813.612] (II) intel(0): EDID vendor "SHP", prod id 5070
>  [  3813.612] (II) intel(0): Printing DDC gathered Modelines:
>  [  3813.612] (II) intel(0): Modeline "1280x800"x0.0   71.00  1280 1328
> 1360 1440  800 803 809 823 -hsync -vsync (49.3 kHz)
>  [  3814.388] (II) intel(0): EDID vendor "SHP", prod id 5070
>  [  3814.388] (II) intel(0): Printing DDC gathered Modelines:
>  [  3814.388] (II) intel(0): Modeline "1280x800"x0.0   71.00  1280 1328
> 1360 1440  800 803 809 823 -hsync -vsync (49.3 kHz)
>  [  3815.181] (II) intel(0): EDID vendor "SHP", prod id 5070
>  [  3815.181] (II) intel(0): Printing DDC gathered Modelines:
>  [  3815.181] (II) intel(0): Modeline "1280x800"x0.0   71.00  1280 1328
> 1360 1440  800 803 809 823 -hsync -vsync (49.3 kHz)
>  [  3820.257] (II) intel(0): EDID vendor "SHP", prod id 5070
>  [  3820.257] (II) intel(0): Printing DDC gathered Modelines:
>  [  3820.257] (II) intel(0): Modeline "1280x800"x0.0   71.00  1280 1328
> 1360 1440  800 803 809 823 -hsync -vsync (49.3 kHz)
>
>  ProblemType: Bug
>  DistroRelease: Ubuntu 10.10
>  Package: evince 2.32.0-0ubuntu1.1
>  ProcVersionSignature: Ubuntu 2.6.35-30.56-generic 2.6.35.13
>  Uname: Linux 2.6.35-30-generic i686
>  Architecture: i386
>  Date: Tue Aug 16 13:01:14 2011
>  InstallationMedia: Ubuntu 10.10 "Maverick Meerkat" - Release i386
> (20101007)
>  ProcEnviron:
>   LANG=en_NZ.utf8
>   SHELL=/bin/bash
>  SourcePackage: evince
>
> To manage notifications about this bug go to:
> https://bugs.launchpad.net/ubuntu/+bug/827080/+subscriptions
>


-- 
Kind Regards,

Rafael Furtado

cellphone: +61 450 534 754

-- 
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/827080

Title:
  System Freeze Every Start-Up

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+bug/827080/+subscriptions

-- 
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs

Reply via email to