Sorry that took so long, ISP problems....
I ran all updates, kernel updated to 2.6.38-11.50.
AR5008 still doesn't work....


At 04:09 PM 8/31/2011 +0000, you wrote:
>Ryan,
>there was a known bug with AR5008 chips that was 
>fixed in kernel 2.6.38-10.46. Could you update 
>your kernel and confirm whether this is still an issue?
>
>** Changed in: linux (Ubuntu)
>        Status: New => Incomplete
>
>--
>You received this bug notification because you are subscribed to the bug
>report.
>https://bugs.launchpad.net/bugs/776069
>
>Title:
>   ZyXEL Cardbus adapter (AR5008) fails to authenticate after upgrade to
>   Natty (from 10.10)
>
>Status in “linux” package in Ubuntu:
>   Incomplete
>
>Bug description:
>   After upgrade to Natty (official release) 
> ZyXEL Cardbus adapter (AR5008) fails to authenticate.
>   Networkmanager just keeps re-prompting for WPA keys.
>   If I remove the ZyXEL adapter and insert a 
> Cisco aironet adapter networkmanager connects properly.
>   the ZyXEL adapter worked properly in 10.10.
>   ssid is configured for WPA2-psk (WPA1-disabled)
>
>   NETWORK
>         Network controller
>                 Atheros Communications Inc. 
> AR5008 Wireless Network Adapter (rev 01)
>                 Subsystem: ZyXEL Communications 
> Corporation NWD-170N 802.11bgn Wireless CardBus Adapter
>
>   from syslog:
>   NetworkManager[623]: <info> (wlan0): driver 
> supports SSID scans (scan_capa 0x01).
>   NetworkManager[623]: <info> (wlan0): new 
> 802.11 WiFi device (driver: 'ath9k' ifindex: 6)
>   NetworkManager[623]: <info> (wlan0): exported 
> as /org/freedesktop/NetworkManager/Devices/4
>   NetworkManager[623]: <info> (wlan0): now managed
>   NetworkManager[623]: <info> (wlan0): device state change: 1 -> 2 (reason 2)
>   NetworkManager[623]: <info> (wlan0): bringing up device.
>   NetworkManager[623]: <info> (wlan0): preparing device.
>   NetworkManager[623]: <info> (wlan0): deactivating device (reason: 2).
>   kernel: [ 1523.345781] ADDRCONF(NETDEV_UP): wlan0: link is not ready
>   NetworkManager[623]:    SCPlugin-Ifupdown: 
> devices added (path: 
> /sys/devices/pci0000:00/0000:00:1e.0/0000:02:01.1/0000:07:00.0/net/wlan0, 
> iface: wlan0)
>   NetworkManager[623]:    SCPlugin-Ifupdown: 
> device added (path: 
> /sys/devices/pci0000:00/0000:00:1e.0/0000:02:01.1/0000:07:00.0/net/wlan0, 
> iface: wlan0): no ifupdown configuration found.
>   NetworkManager[623]: <info> (wlan0): 
> supplicant interface state:  starting -> ready
>   NetworkManager[623]: <info> (wlan0): device 
> state change: 2 -> 3 (reason 42)
>   wpa_supplicant[805]: Failed to initiate AP scan.
>   kernel: [ 1524.232559] ath: Failed to stop TX 
> DMA in 100 msec after killing last frame
>   kernel: [ 1524.232638] ath: Failed to stop TX DMA!
>   NetworkManager[623]: <info> Activation (wlan0) starting connection 'SSid'
>   NetworkManager[623]: <info> (wlan0): device state change: 3 -> 4 (reason 0)
>   NetworkManager[623]: <info> Activation 
> (wlan0) Stage 1 of 5 (Device Prepare) scheduled...
>   NetworkManager[623]: <info> Activation 
> (wlan0) Stage 1 of 5 (Device Prepare) started...
>   NetworkManager[623]: <info> Activation 
> (wlan0) Stage 2 of 5 (Device Configure) scheduled...
>   NetworkManager[623]: <info> Activation 
> (wlan0) Stage 1 of 5 (Device Prepare) complete.
>   NetworkManager[623]: <info> Activation 
> (wlan0) Stage 2 of 5 (Device Configure) starting...
>   NetworkManager[623]: <info> (wlan0): device state change: 4 -> 5 (reason 0)
>   NetworkManager[623]: <info> Activation 
> (wlan0/wireless): access point 'SSid' has security, but secrets are required.
>   NetworkManager[623]: <info> (wlan0): device state change: 5 -> 6 (reason 0)
>   NetworkManager[623]: <info> Activation 
> (wlan0) Stage 2 of 5 (Device Configure) complete.
>   NetworkManager[623]: <info> Activation 
> (wlan0) Stage 1 of 5 (Device Prepare) scheduled...
>   NetworkManager[623]: <info> Activation 
> (wlan0) Stage 1 of 5 (Device Prepare) started...
>   NetworkManager[623]: <info> (wlan0): device state change: 6 -> 4 (reason 0)
>   NetworkManager[623]: <info> Activation 
> (wlan0) Stage 2 of 5 (Device Configure) scheduled...
>   NetworkManager[623]: <info> Activation 
> (wlan0) Stage 1 of 5 (Device Prepare) complete.
>   NetworkManager[623]: <info> Activation 
> (wlan0) Stage 2 of 5 (Device Configure) starting...
>   NetworkManager[623]: <info> (wlan0): device state change: 4 -> 5 (reason 0)
>   NetworkManager[623]: <info> Activation 
> (wlan0/wireless): connection 'SSid' has 
> security, and secrets exist.  No new secrets needed.
>   NetworkManager[623]: <info> Config: added 'ssid' value 'SSid'
>   NetworkManager[623]: <info> Config: added 'scan_ssid' value '1'
>   NetworkManager[623]: <info> Config: added 'key_mgmt' value 'WPA-PSK'
>   NetworkManager[623]: <info> Config: added 'psk' value '<omitted>'
>   NetworkManager[623]: 
> nm_setting_802_1x_get_pkcs11_engine_path: 
> assertion `NM_IS_SETTING_802_1X (setting)' failed
>   NetworkManager[623]: 
> nm_setting_802_1x_get_pkcs11_module_path: 
> assertion `NM_IS_SETTING_802_1X (setting)' failed
>   NetworkManager[623]: <info> Activation 
> (wlan0) Stage 2 of 5 (Device Configure) complete.
>   NetworkManager[623]: <info> Config: set interface ap_scan to 1
>   NetworkManager[623]: <info> (wlan0): 
> supplicant connection state:  inactive -> scanning
>   kernel: [ 1525.436551] ath: Failed to stop TX 
> DMA in 100 msec after killing last frame
>   kernel: [ 1525.436626] ath: Failed to stop TX DMA!
>   kernel: [ 1542.700558] ath: Failed to stop TX 
> DMA in 100 msec after killing last frame
>   kernel: [ 1542.700637] ath: Failed to stop TX DMA!
>   kernel: [ 1543.124560] ath: Failed to stop TX 
> DMA in 100 msec after killing last frame
>   kernel: [ 1543.124637] ath: Failed to stop TX DMA!
>   kernel: [ 1549.016560] ath: Failed to stop TX 
> DMA in 100 msec after killing last frame
>   kernel: [ 1549.016641] ath: Failed to stop TX DMA!
>
>To manage notifications about this bug go to:
>https://bugs.launchpad.net/ubuntu/+source/linux/+bug/776069/+subscriptions

-- 
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/776069

Title:
  ZyXEL Cardbus adapter (AR5008) fails to authenticate after upgrade to
  Natty (from 10.10)

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/linux/+bug/776069/+subscriptions

-- 
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs

Reply via email to