apport information ** Tags added: apport-collected
** Description changed: After installing cpufrequtils I noticed some error message. Does error message also occurs in /var/log/boot.log: FATAL: Error inserting p4_clockmod (/lib/modules/3.0.0-16-generic/kernel/drivers/cpufreq/p4-clockmod.ko): No such device * Stopping Failsafe Boot Delay FATAL: Error inserting pcc_cpufreq (/lib/modules/3.0.0-16-generic/kernel/drivers/cpufreq/pcc-cpufreq.ko): No such device * Stopping anac(h)ronistic cron FATAL: Error inserting e_powersaver (/lib/modules/3.0.0-16-generic/kernel/drivers/cpufreq/e_powersaver.ko): No such device * Starting CPU interrupts balancing daemon I noticed after installing cpufrequtils it also effected the bootspeed/time when I restarted the laptop. In a bad way. cpufreq-info cpufrequtils 007: cpufreq-info (C) Dominik Brodowski 2004-2009 Report errors and bugs to cpuf...@vger.kernel.org, please. analyzing CPU 0: driver: powernow-k8 CPUs which run at the same hardware frequency: 0 1 CPUs which need to have their frequency coordinated by software: 0 1 maximum transition latency: 107 us. hardware limits: 800 MHz - 1.60 GHz available frequency steps: 1.60 GHz, 800 MHz available cpufreq governors: conservative, ondemand, userspace, powersave, performance current policy: frequency should be within 800 MHz and 1.60 GHz. The governor "ondemand" may decide which speed to use within this range. current CPU frequency is 800 MHz. cpufreq stats: 1.60 GHz:16,63%, 800 MHz:83,37% (697) analyzing CPU 1: driver: powernow-k8 CPUs which run at the same hardware frequency: 0 1 CPUs which need to have their frequency coordinated by software: 0 1 maximum transition latency: 107 us. hardware limits: 800 MHz - 1.60 GHz available frequency steps: 1.60 GHz, 800 MHz available cpufreq governors: conservative, ondemand, userspace, powersave, performance current policy: frequency should be within 800 MHz and 1.60 GHz. The governor "ondemand" may decide which speed to use within this range. current CPU frequency is 800 MHz. cpufreq stats: 1.60 GHz:16,63%, 800 MHz:83,37% (697) + --- + AlsaVersion: Advanced Linux Sound Architecture Driver Version 1.0.24. + ApportVersion: 1.23-0ubuntu4 + Architecture: i386 + ArecordDevices: + **** List of CAPTURE Hardware Devices **** + card 0: NVidia [HDA NVidia], device 0: ALC883 Analog [ALC883 Analog] + Subdevices: 1/1 + Subdevice #0: subdevice #0 + AudioDevicesInUse: + USER PID ACCESS COMMAND + /dev/snd/controlC0: hem 1676 F.... pulseaudio + CRDA: Error: [Errno 2] Filen eller katalogen finns inte + Card0.Amixer.info: + Card hw:0 'NVidia'/'HDA NVidia at 0xc0000000 irq 19' + Mixer name : 'Realtek ALC883' + Components : 'HDA:10ec0883,17348205,00100002 HDA:14f12bfa,14f10001,00090000' + Controls : 26 + Simple ctrls : 15 + DistroRelease: Ubuntu 11.10 + HibernationDevice: RESUME=UUID=0b9d0972-c5e3-488a-96a9-ff235052bd5a + InstallationMedia: Kubuntu 11.10 "Oneiric Ocelot" - Release i386 (20111012) + Lsusb: + Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub + Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub + Bus 002 Device 002: ID 093a:2510 Pixart Imaging, Inc. Optical Mouse + MachineType: FUJITSU SIEMENS AMILO Pa 1538 + NonfreeKernelModules: nvidia + Package: linux (not installed) + ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.0.0-16-generic root=UUID=aee60c94-7ae7-4989-9342-7f31dca60d6c ro quiet splash vt.handoff=7 + ProcVersionSignature: Ubuntu 3.0.0-16.28-generic 3.0.17 + RelatedPackageVersions: + linux-restricted-modules-3.0.0-16-generic N/A + linux-backports-modules-3.0.0-16-generic N/A + linux-firmware 1.60 + RfKill: + 0: phy0: Wireless LAN + Soft blocked: no + Hard blocked: no + Tags: oneiric + Uname: Linux 3.0.0-16-generic i686 + UpgradeStatus: No upgrade log present (probably fresh install) + UserGroups: adm admin cdrom dialout lpadmin plugdev sambashare + dmi.bios.date: 10/24/08 + dmi.bios.vendor: Phoenix + dmi.bios.version: 1.1Q-5821-8A20 + dmi.board.name: PTB50 + dmi.board.vendor: FUJITSU SIEMENS + dmi.board.version: 0.6 + dmi.chassis.asset.tag: Tag 12345 + dmi.chassis.type: 10 + dmi.chassis.vendor: FUJITSU SIEMENS + dmi.chassis.version: Pa1538 + dmi.modalias: dmi:bvnPhoenix:bvr1.1Q-5821-8A20:bd10/24/08:svnFUJITSUSIEMENS:pnAMILOPa1538:pvrREFERENCE:rvnFUJITSUSIEMENS:rnPTB50:rvr0.6:cvnFUJITSUSIEMENS:ct10:cvrPa1538: + dmi.product.name: AMILO Pa 1538 + dmi.product.version: REFERENCE + dmi.sys.vendor: FUJITSU SIEMENS ** Attachment added: "AcpiTables.txt" https://bugs.launchpad.net/bugs/933443/+attachment/2745160/+files/AcpiTables.txt -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/933443 Title: Problem after installing cpufrequtils! Kubuntu 11.10 To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/933443/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs