> * If so, what specific steps should we take to recreate this bug? Bug got after this steps: 1) Start Ubuntu 2) After logging system display message about crashing apt-daemon (Ubuntu show that it is a known bug)/ 3) Close the error window about crashing apt-daemon 4) Start update-manager manually. 5) System display error message with information of this bug.
Bug did not reproduced after update system > * Could you please test the latest upstream kernel available? It will allow > additional upstream developers to examine the issue. Refer to > https://wiki.ubuntu.com/KernelMainlineBuilds . Once you've tested the > upstream kernel, please remove the 'needs-upstream-testing' tag. This can be > done by clicking on the yellow pencil icon next to the tag located at the > bottom of the bug description and deleting the 'needs-upstream-testing' text. > Please let us know your results. I cann`t test software, which not in standart repository, because Ubuntu installed on my working computer and i don`t have time for this testing. But my Ubuntu always updated to latest sofware versions. Mon, 09 Apr 2012 10:49:51 -0000 от "Christopher M. Penalver" <christopher.penal...@gmx.com>: > Nik Lazer, thank you for reporting this bug and helping make Ubuntu > better. Please answer these questions: > > * Is this reproducible? > * If so, what specific steps should we take to recreate this bug? > * Could you please test the latest upstream kernel available? It will allow > additional upstream developers to examine the issue. Refer to > https://wiki.ubuntu.com/KernelMainlineBuilds . Once you've tested the > upstream kernel, please remove the 'needs-upstream-testing' tag. This can be > done by clicking on the yellow pencil icon next to the tag located at the > bottom of the bug description and deleting the 'needs-upstream-testing' text. > Please let us know your results. > > Thanks in advance. > > ** Description changed: > > Ubuntu 3.2.0-22.35-generic 3.2.14 > - > - 00:00.0 Host bridge [0600]: Intel Corporation 82945G/GZ/P/PL Memory > Controller Hub [8086:2770] (rev 02) > - Subsystem: ASUSTeK Computer Inc. P5LD2-VM Mainboard [1043:817a] > - Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- > Stepping- SERR- FastB2B- DisINTx- > - Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- > <MAbort+ >SERR- <PERR- INTx- > - Latency: 0 > - Capabilities: [e0] Vendor Specific Information: Len=09 <?> > - Kernel driver in use: agpgart-intel > - > - 00:02.0 VGA compatible controller [0300]: Intel Corporation 82945G/GZ > Integrated Graphics Controller [8086:2772] (rev 02) (prog-if 00 [VGA > controller]) > - Subsystem: ASUSTeK Computer Inc. Device [1043:817a] > - Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- > Stepping- SERR- FastB2B- DisINTx- > - Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- > <MAbort- >SERR- <PERR- INTx- > - Latency: 0 > - Interrupt: pin A routed to IRQ 16 > - Region 0: Memory at dfe00000 (32-bit, non-prefetchable) [size=512K] > - Region 1: I/O ports at 8800 [size=8] > - Region 2: Memory at e0000000 (32-bit, prefetchable) [size=256M] > - Region 3: Memory at dfe80000 (32-bit, non-prefetchable) [size=256K] > - Expansion ROM at <unassigned> [disabled] > - Capabilities: [90] MSI: Enable- Count=1/1 Maskable- 64bit- > - Address: 00000000 Data: 0000 > - Capabilities: [d0] Power Management version 2 > - Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA > PME(D0-,D1-,D2-,D3hot-,D3cold-) > - Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME- > - Kernel driver in use: i915 > - Kernel modules: intelfb, i915 > - > - 00:1b.0 Audio device [0403]: Intel Corporation N10/ICH 7 Family High > Definition Audio Controller [8086:27d8] (rev 01) > - Subsystem: ASUSTeK Computer Inc. P5LD2-VM Mainboard (Realtek ALC 882 > codec) [1043:817f] > - Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- > Stepping- SERR- FastB2B- DisINTx+ > - Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- > <MAbort- >SERR- <PERR- INTx- > - Latency: 0, Cache Line Size: 16 bytes > - Interrupt: pin A routed to IRQ 42 > - Region 0: Memory at dfef8000 (64-bit, non-prefetchable) [size=16K] > - Capabilities: [50] Power Management version 2 > - Flags: PMEClk- DSI- D1- D2- AuxCurrent=55mA > PME(D0+,D1-,D2-,D3hot+,D3cold+) > - Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME- > - Capabilities: [60] MSI: Enable+ Count=1/1 Maskable- 64bit+ > - Address: 00000000fee0100c Data: 4181 > - Capabilities: [70] Express (v1) Root Complex Integrated Endpoint, MSI 00 > - DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, > L1 <1us > - ExtTag- RBE- FLReset- > - DevCtl: Report errors: Correctable- Non-Fatal- Fatal- > Unsupported- > - RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop+ > - MaxPayload 128 bytes, MaxReadReq 128 bytes > - DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ > TransPend- > - LnkCap: Port #0, Speed unknown, Width x0, ASPM unknown, Latency > L0 <64ns, L1 <1us > - ClockPM- Surprise- LLActRep- BwNot- > - LnkCtl: ASPM Disabled; Disabled- Retrain- CommClk- > - ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt- > - LnkSta: Speed unknown, Width x0, TrErr- Train- SlotClk- > DLActive- BWMgmt- ABWMgmt- > - Capabilities: [100 v1] Virtual Channel > - Caps: LPEVC=0 RefClk=100ns PATEntryBits=1 > - Arb: Fixed- WRR32- WRR64- WRR128- > - Ctrl: ArbSelect=Fixed > - Status: InProgress- > - VC0: Caps: PATOffset=00 MaxTimeSlots=1 RejSnoopTrans- > - Arb: Fixed- WRR32- WRR64- WRR128- TWRR128- WRR256- > - Ctrl: Enable+ ID=0 ArbSelect=Fixed TC/VC=01 > - Status: NegoPending- InProgress- > - VC1: Caps: PATOffset=00 MaxTimeSlots=1 RejSnoopTrans- > - Arb: Fixed- WRR32- WRR64- WRR128- TWRR128- WRR256- > - Ctrl: Enable+ ID=1 ArbSelect=Fixed TC/VC=80 > - Status: NegoPending- InProgress- > - Capabilities: [130 v1] Root Complex Link > - Desc: PortNumber=0f ComponentID=00 EltType=Config > - Link0: Desc: TargetPort=00 TargetComponent=00 AssocRCRB- > LinkType=MemMapped LinkValid+ > - Addr: 00000000fed1c000 > - Kernel driver in use: snd_hda_intel > - Kernel modules: snd-hda-intel > - > - 00:1c.0 PCI bridge [0604]: Intel Corporation N10/ICH 7 Family PCI Express > Port 1 [8086:27d0] (rev 01) (prog-if 00 [Normal decode]) > - Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- > Stepping- SERR+ FastB2B- DisINTx+ > - Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- > <MAbort- >SERR- <PERR- INTx- > - Latency: 0, Cache Line Size: 16 bytes > - Bus: primary=00, secondary=03, subordinate=03, sec-latency=0 > - I/O behind bridge: 0000e000-0000efff > - Memory behind bridge: 80000000-801fffff > - Prefetchable memory behind bridge: 0000000080200000-00000000803fffff > - Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- > <MAbort- <SERR- <PERR- > - BridgeCtl: Parity- SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B- > - PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- > - Capabilities: [40] Express (v1) Root Port (Slot+), MSI 00 > - DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s > unlimited, L1 unlimited > - ExtTag- RBE- FLReset- > - DevCtl: Report errors: Correctable- Non-Fatal- Fatal- > Unsupported- > - RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop- > - MaxPayload 128 bytes, MaxReadReq 128 bytes > - DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ > TransPend- > - LnkCap: Port #1, Speed 2.5GT/s, Width x1, ASPM L0s L1, Latency > L0 <256ns, L1 <4us > - ClockPM- Surprise- LLActRep+ BwNot- > - LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk+ > - ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt- > - LnkSta: Speed 2.5GT/s, Width x0, TrErr- Train- SlotClk+ > DLActive- BWMgmt- ABWMgmt- > - SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ > Surprise+ > - Slot #1, PowerLimit 10.000W; Interlock- NoCompl- > - SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- > LinkChg- > - Control: AttnInd Unknown, PwrInd Unknown, Power- > Interlock- > - SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet- > Interlock- > - Changed: MRL- PresDet- LinkState- > - RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- > CRSVisible- > - RootCap: CRSVisible- > - RootSta: PME ReqID 0000, PMEStatus- PMEPending- > - Capabilities: [80] MSI: Enable+ Count=1/1 Maskable- 64bit- > - Address: fee0300c Data: 4161 > - Capabilities: [90] Subsystem: ASUSTeK Computer Inc. Device [1043:8179] > - Capabilities: [a0] Power Management version 2 > - Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA > PME(D0+,D1-,D2-,D3hot+,D3cold+) > - Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME- > - Capabilities: [100 v1] Virtual Channel > - Caps: LPEVC=0 RefClk=100ns PATEntryBits=1 > - Arb: Fixed+ WRR32- WRR64- WRR128- > - Ctrl: ArbSelect=Fixed > - Status: InProgress- > - VC0: Caps: PATOffset=00 MaxTimeSlots=1 RejSnoopTrans- > - Arb: Fixed+ WRR32- WRR64- WRR128- TWRR128- WRR256- > - Ctrl: Enable+ ID=0 ArbSelect=Fixed TC/VC=ff > - Status: NegoPending- InProgress- > - VC1: Caps: PATOffset=00 MaxTimeSlots=1 RejSnoopTrans- > - Arb: Fixed+ WRR32- WRR64- WRR128- TWRR128- WRR256- > - Ctrl: Enable- ID=0 ArbSelect=Fixed TC/VC=00 > - Status: NegoPending- InProgress- > - Capabilities: [180 v1] Root Complex Link > - Desc: PortNumber=01 ComponentID=00 EltType=Config > - Link0: Desc: TargetPort=00 TargetComponent=00 AssocRCRB- > LinkType=MemMapped LinkValid+ > - Addr: 00000000fed1c001 > - Kernel driver in use: pcieport > - Kernel modules: shpchp > - > - 00:1c.1 PCI bridge [0604]: Intel Corporation N10/ICH 7 Family PCI Express > Port 2 [8086:27d2] (rev 01) (prog-if 00 [Normal decode]) > - Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- > Stepping- SERR+ FastB2B- DisINTx+ > - Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- > <MAbort- >SERR- <PERR- INTx- > - Latency: 0, Cache Line Size: 16 bytes > - Bus: primary=00, secondary=02, subordinate=02, sec-latency=0 > - I/O behind bridge: 0000d000-0000dfff > - Memory behind bridge: dff00000-dfffffff > - Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- > <MAbort- <SERR- <PERR- > - BridgeCtl: Parity- SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B- > - PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- > - Capabilities: [40] Express (v1) Root Port (Slot-), MSI 00 > - DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s > unlimited, L1 unlimited > - ExtTag- RBE- FLReset- > - DevCtl: Report errors: Correctable- Non-Fatal- Fatal- > Unsupported- > - RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop- > - MaxPayload 128 bytes, MaxReadReq 128 bytes > - DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ > TransPend- > - LnkCap: Port #2, Speed 2.5GT/s, Width x1, ASPM L0s L1, Latency > L0 <256ns, L1 <4us > - ClockPM- Surprise- LLActRep+ BwNot- > - LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk+ > - ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt- > - LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ > DLActive+ BWMgmt- ABWMgmt- > - RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- > CRSVisible- > - RootCap: CRSVisible- > - RootSta: PME ReqID 0000, PMEStatus- PMEPending- > - Capabilities: [80] MSI: Enable+ Count=1/1 Maskable- 64bit- > - Address: fee0300c Data: 4169 > - Capabilities: [90] Subsystem: ASUSTeK Computer Inc. Device [1043:8179] > - Capabilities: [a0] Power Management version 2 > - Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA > PME(D0+,D1-,D2-,D3hot+,D3cold+) > - Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME- > - Capabilities: [100 v1] Virtual Channel > - Caps: LPEVC=0 RefClk=100ns PATEntryBits=1 > - Arb: Fixed+ WRR32- WRR64- WRR128- > - Ctrl: ArbSelect=Fixed > - Status: InProgress- > - VC0: Caps: PATOffset=00 MaxTimeSlots=1 RejSnoopTrans- > - Arb: Fixed+ WRR32- WRR64- WRR128- TWRR128- WRR256- > - Ctrl: Enable+ ID=0 ArbSelect=Fixed TC/VC=ff > - Status: NegoPending- InProgress- > - VC1: Caps: PATOffset=00 MaxTimeSlots=1 RejSnoopTrans- > - Arb: Fixed+ WRR32- WRR64- WRR128- TWRR128- WRR256- > - Ctrl: Enable- ID=0 ArbSelect=Fixed TC/VC=00 > - Status: NegoPending- InProgress- > - Capabilities: [180 v1] Root Complex Link > - Desc: PortNumber=02 ComponentID=00 EltType=Config > - Link0: Desc: TargetPort=00 TargetComponent=00 AssocRCRB- > LinkType=MemMapped LinkValid+ > - Addr: 00000000fed1c001 > - Kernel driver in use: pcieport > - Kernel modules: shpchp > - > - 00:1d.0 USB controller [0c03]: Intel Corporation N10/ICH 7 Family USB UHCI > Controller #1 [8086:27c8] (rev 01) (prog-if 00 [UHCI]) > - Subsystem: ASUSTeK Computer Inc. P5KPL-VM,P5LD2-VM Mainboard [1043:8179] > - Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- > Stepping- SERR- FastB2B- DisINTx- > - Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- > <TAbort- <MAbort- >SERR- <PERR- INTx- > - Latency: 0 > - Interrupt: pin A routed to IRQ 20 > - Region 4: I/O ports at 9000 [size=32] > - Kernel driver in use: uhci_hcd > - > - 00:1d.1 USB controller [0c03]: Intel Corporation N10/ICH 7 Family USB UHCI > Controller #2 [8086:27c9] (rev 01) (prog-if 00 [UHCI]) > - Subsystem: ASUSTeK Computer Inc. P5KPL-VM,P5LD2-VM Mainboard [1043:8179] > - Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- > Stepping- SERR- FastB2B- DisINTx- > - Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- > <TAbort- <MAbort- >SERR- <PERR- INTx- > - Latency: 0 > - Interrupt: pin B routed to IRQ 17 > - Region 4: I/O ports at 9400 [size=32] > - Kernel driver in use: uhci_hcd > - > - 00:1d.2 USB controller [0c03]: Intel Corporation N10/ICH 7 Family USB UHCI > Controller #3 [8086:27ca] (rev 01) (prog-if 00 [UHCI]) > - Subsystem: ASUSTeK Computer Inc. P5KPL-VM,P5LD2-VM Mainboard [1043:8179] > - Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- > Stepping- SERR- FastB2B- DisINTx- > - Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- > <TAbort- <MAbort- >SERR- <PERR- INTx- > - Latency: 0 > - Interrupt: pin C routed to IRQ 18 > - Region 4: I/O ports at 9800 [size=32] > - Kernel driver in use: uhci_hcd > - > - 00:1d.3 USB controller [0c03]: Intel Corporation N10/ICH 7 Family USB UHCI > Controller #4 [8086:27cb] (rev 01) (prog-if 00 [UHCI]) > - Subsystem: ASUSTeK Computer Inc. P5KPL-VM,P5LD2-VM Mainboard [1043:8179] > - Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- > Stepping- SERR- FastB2B- DisINTx- > - Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- > <TAbort- <MAbort- >SERR- <PERR- INTx- > - Latency: 0 > - Interrupt: pin D routed to IRQ 19 > - Region 4: I/O ports at a000 [size=32] > - Kernel driver in use: uhci_hcd > - > - 00:1d.7 USB controller [0c03]: Intel Corporation N10/ICH 7 Family USB2 EHCI > Controller [8086:27cc] (rev 01) (prog-if 20 [EHCI]) > - Subsystem: ASUSTeK Computer Inc. P5KPL-VM,P5LD2-VM Mainboard [1043:8179] > - Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- > Stepping- SERR- FastB2B- DisINTx- > - Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- > <TAbort- <MAbort- >SERR- <PERR- INTx- > - Latency: 0 > - Interrupt: pin A routed to IRQ 20 > - Region 0: Memory at dfeffc00 (32-bit, non-prefetchable) [size=1K] > - Capabilities: [50] Power Management version 2 > - Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA > PME(D0+,D1-,D2-,D3hot+,D3cold+) > - Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME- > - Capabilities: [58] Debug port: BAR=1 offset=00a0 > - Kernel driver in use: ehci_hcd > - > - 00:1e.0 PCI bridge [0604]: Intel Corporation 82801 PCI Bridge [8086:244e] > (rev e1) (prog-if 01 [Subtractive decode]) > - Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- > Stepping- SERR+ FastB2B- DisINTx- > - Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- > <MAbort- >SERR- <PERR- INTx- > - Latency: 0 > - Bus: primary=00, secondary=01, subordinate=01, sec-latency=32 > - I/O behind bridge: 0000c000-0000cfff > - Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- > <TAbort- <MAbort+ <SERR- <PERR- > - BridgeCtl: Parity- SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B- > - PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- > - Capabilities: [50] Subsystem: ASUSTeK Computer Inc. Device [1043:8179] > - > - 00:1f.0 ISA bridge [0601]: Intel Corporation 82801GB/GR (ICH7 Family) LPC > Interface Bridge [8086:27b8] (rev 01) > - Subsystem: ASUSTeK Computer Inc. P5KPL-VM Motherboard [1043:8179] > - Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- > Stepping- SERR- FastB2B- DisINTx- > - Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- > <TAbort- <MAbort- >SERR- <PERR- INTx- > - Latency: 0 > - Capabilities: [e0] Vendor Specific Information: Len=0c <?> > - Kernel modules: leds-ss4200, iTCO_wdt, intel-rng > - > - 00:1f.1 IDE interface [0101]: Intel Corporation 82801G (ICH7 Family) IDE > Controller [8086:27df] (rev 01) (prog-if 8a [Master SecP PriP]) > - Subsystem: ASUSTeK Computer Inc. P5KPL-VM Motherboard [1043:8179] > - Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- > Stepping- SERR- FastB2B- DisINTx- > - Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- > <TAbort- <MAbort- >SERR- <PERR- INTx+ > - Latency: 0 > - Interrupt: pin A routed to IRQ 22 > - Region 0: I/O ports at 01f0 [size=8] > - Region 1: I/O ports at 03f4 [size=1] > - Region 2: I/O ports at 0170 [size=8] > - Region 3: I/O ports at 0374 [size=1] > - Region 4: I/O ports at ffa0 [size=16] > - Kernel driver in use: ata_piix > - > - 00:1f.2 IDE interface [0101]: Intel Corporation N10/ICH7 Family SATA > Controller [IDE mode] [8086:27c0] (rev 01) (prog-if 8f [Master SecP SecO PriP > PriO]) > - Subsystem: ASUSTeK Computer Inc. Device [1043:2601] > - Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- > Stepping- SERR- FastB2B- DisINTx- > - Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- > <TAbort- <MAbort- >SERR- <PERR- INTx- > - Latency: 0 > - Interrupt: pin B routed to IRQ 23 > - Region 0: I/O ports at b800 [size=8] > - Region 1: I/O ports at b400 [size=4] > - Region 2: I/O ports at b000 [size=8] > - Region 3: I/O ports at a800 [size=4] > - Region 4: I/O ports at a400 [size=16] > - Capabilities: [70] Power Management version 2 > - Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA > PME(D0-,D1-,D2-,D3hot+,D3cold-) > - Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME- > - Kernel driver in use: ata_piix > - > - 00:1f.3 SMBus [0c05]: Intel Corporation N10/ICH 7 Family SMBus Controller > [8086:27da] (rev 01) > - Subsystem: ASUSTeK Computer Inc. P5KPL-VM Motherboard [1043:8179] > - Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- > Stepping- SERR- FastB2B- DisINTx- > - Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- > <TAbort- <MAbort- >SERR- <PERR- INTx- > - Interrupt: pin B routed to IRQ 10 > - Region 4: I/O ports at 0400 [size=32] > - Kernel modules: i2c-i801 > - > - 02:00.0 Ethernet controller [0200]: Atheros Communications Inc. Attansic L1 > Gigabit Ethernet [1969:1048] (rev b0) > - Subsystem: ASUSTeK Computer Inc. P5KPL-VM Motherboard [1043:8226] > - Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- > Stepping- SERR- FastB2B- DisINTx+ > - Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- > <MAbort- >SERR- <PERR- INTx- > - Latency: 0, Cache Line Size: 16 bytes > - Interrupt: pin A routed to IRQ 43 > - Region 0: Memory at dffc0000 (64-bit, non-prefetchable) [size=256K] > - Expansion ROM at dffa0000 [disabled] [size=128K] > - Capabilities: [40] Power Management version 2 > - Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA > PME(D0-,D1-,D2-,D3hot+,D3cold+) > - Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME- > - Capabilities: [48] MSI: Enable+ Count=1/1 Maskable- 64bit+ > - Address: 00000000fee0100c Data: 4189 > - Capabilities: [58] Express (v1) Endpoint, MSI 00 > - DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <4us, L1 > unlimited > - ExtTag- AttnBtn+ AttnInd+ PwrInd+ RBE- FLReset- > - DevCtl: Report errors: Correctable- Non-Fatal- Fatal- > Unsupported- > - RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop- > - MaxPayload 128 bytes, MaxReadReq 512 bytes > - DevSta: CorrErr- UncorrErr+ FatalErr- UnsuppReq+ AuxPwr+ > TransPend- > - LnkCap: Port #0, Speed 2.5GT/s, Width x1, ASPM L0s, Latency L0 > unlimited, L1 unlimited > - ClockPM- Surprise- LLActRep- BwNot- > - LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk+ > - ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt- > - LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ > DLActive- BWMgmt- ABWMgmt- > - Capabilities: [6c] Vital Product Data > - Unknown small resource type 00, will not decode more. > - Capabilities: [100 v1] Advanced Error Reporting > - UESta: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt+ UnxCmplt- > RxOF- MalfTLP- ECRC- UnsupReq+ ACSViol- > - UEMsk: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- > RxOF- MalfTLP- ECRC- UnsupReq- ACSViol- > - UESvrt: DLP+ SDES- TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- > RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol- > - CESta: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr- > - CEMsk: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr- > - AERCap: First Error Pointer: 14, GenCap+ CGenEn- ChkCap+ ChkEn- > - Kernel driver in use: atl1 > - Kernel modules: atl1 > > ProblemType: KernelOops > DistroRelease: Ubuntu 12.04 > Package: linux-image-3.2.0-22-generic 3.2.0-22.35 > ProcVersionSignature: Ubuntu 3.2.0-22.35-generic 3.2.14 > Uname: Linux 3.2.0-22-generic x86_64 > AlsaVersion: Advanced Linux Sound Architecture Driver Version 1.0.24. > Annotation: Your system might become unstable now and might need to be > restarted. > ApportVersion: 2.0-0ubuntu4 > Architecture: amd64 > AudioDevicesInUse: > - USER PID ACCESS COMMAND > - /dev/snd/controlC0: lazarev_nv 1694 F.... pulseaudio > + USER PID ACCESS COMMAND > + /dev/snd/controlC0: lazarev_nv 1694 F.... pulseaudio > CRDA: Error: command ['iw', 'reg', 'get'] failed with exit code 1: nl80211 > not found. > Date: Mon Apr 9 08:00:39 2012 > Failure: oops > HibernationDevice: RESUME=UUID=67748c4e-1785-4a2b-80c5-2335dd9f362d > InstallationMedia: Ubuntu 11.10 "Oneiric Ocelot" - Release amd64 (20111012) > IwConfig: > - lo no wireless extensions. > - > - eth0 no wireless extensions. > + lo no wireless extensions. > + > + eth0 no wireless extensions. > MachineType: ASUSTek Computer INC. P5L-MX > ProcFB: 0 inteldrmfb > ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.2.0-22-generic > root=UUID=db6db0cc-726c-4d44-9885-937c8d781aef ro quiet splash vt.handoff=7 > PulseList: Error: command ['pacmd', 'list'] failed with exit code 1: No > PulseAudio daemon running, or not running as session daemon. > RelatedPackageVersions: kerneloops-daemon 0.12+git20090217-1ubuntu18 > RfKill: > - > + > SourcePackage: linux > Title: BUG: unable to handle kernel NULL pointer dereference > UpgradeStatus: Upgraded to precise on 2012-03-14 (25 days ago) > dmi.bios.date: 06/05/2007 > dmi.bios.vendor: American Megatrends Inc. > dmi.bios.version: 1004 > dmi.board.asset.tag: To Be Filled By O.E.M. > dmi.board.name: P5L-MX > dmi.board.vendor: ASUSTeK Computer INC. > dmi.board.version: Rev x.xx > dmi.chassis.asset.tag: Asset-1234567890 > dmi.chassis.type: 3 > dmi.chassis.vendor: ASUSTek Computer INC. > dmi.chassis.version: Rev 1.xx > dmi.modalias: > dmi:bvnAmericanMegatrendsInc.:bvr1004:bd06/05/2007:svnASUSTekComputerINC.:pnP5L-MX:pvrRev1.xx:rvnASUSTeKComputerINC.:rnP5L-MX:rvrRevx.xx:cvnASUSTekComputerINC.:ct3:cvrRev1.xx: > dmi.product.name: P5L-MX > dmi.product.version: Rev 1.xx > dmi.sys.vendor: ASUSTek Computer INC. > > ** Summary changed: > > - BUG: unable to handle kernel NULL pointer dereference > + BUG: unable to handle kernel NULL pointer dereference; RIP: > 0010:[<ffffffff812dc33b>] [<ffffffff812dc33b>] crypto_larval_kill+0x2b/0x90 > > ** Tags added: kernel-bug needs-upstream-testing > > ** Summary changed: > > - BUG: unable to handle kernel NULL pointer dereference; RIP: > 0010:[<ffffffff812dc33b>] [<ffffffff812dc33b>] crypto_larval_kill+0x2b/0x90 > + BUG: unable to handle kernel NULL pointer dereference at 0000000000000008; > RIP: 0010:[<ffffffff812dc33b>] [<ffffffff812dc33b>] > crypto_larval_kill+0x2b/0x90 > > ** Changed in: linux (Ubuntu) > Status: Confirmed => Incomplete > > -- > You received this bug notification because you are subscribed to the bug > report. > https://bugs.launchpad.net/bugs/976964 > > Title: > BUG: unable to handle kernel NULL pointer dereference at > 0000000000000008; RIP: 0010:[<ffffffff812dc33b>] [<ffffffff812dc33b>] > crypto_larval_kill+0x2b/0x90 > > Status in “linux” package in Ubuntu: > Incomplete > > Bug description: > Ubuntu 3.2.0-22.35-generic 3.2.14 > > ProblemType: KernelOops > DistroRelease: Ubuntu 12.04 > Package: linux-image-3.2.0-22-generic 3.2.0-22.35 > ProcVersionSignature: Ubuntu 3.2.0-22.35-generic 3.2.14 > Uname: Linux 3.2.0-22-generic x86_64 > AlsaVersion: Advanced Linux Sound Architecture Driver Version 1.0.24. > Annotation: Your system might become unstable now and might need to be > restarted. > ApportVersion: 2.0-0ubuntu4 > Architecture: amd64 > AudioDevicesInUse: > USER PID ACCESS COMMAND > /dev/snd/controlC0: lazarev_nv 1694 F.... pulseaudio > CRDA: Error: command ['iw', 'reg', 'get'] failed with exit code 1: nl80211 > not found. > Date: Mon Apr 9 08:00:39 2012 > Failure: oops > HibernationDevice: RESUME=UUID=67748c4e-1785-4a2b-80c5-2335dd9f362d > InstallationMedia: Ubuntu 11.10 "Oneiric Ocelot" - Release amd64 (20111012) > IwConfig: > lo no wireless extensions. > > eth0 no wireless extensions. > MachineType: ASUSTek Computer INC. P5L-MX > ProcFB: 0 inteldrmfb > ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.2.0-22-generic > root=UUID=db6db0cc-726c-4d44-9885-937c8d781aef ro quiet splash vt.handoff=7 > PulseList: Error: command ['pacmd', 'list'] failed with exit code 1: No > PulseAudio daemon running, or not running as session daemon. > RelatedPackageVersions: kerneloops-daemon 0.12+git20090217-1ubuntu18 > RfKill: > > SourcePackage: linux > Title: BUG: unable to handle kernel NULL pointer dereference > UpgradeStatus: Upgraded to precise on 2012-03-14 (25 days ago) > dmi.bios.date: 06/05/2007 > dmi.bios.vendor: American Megatrends Inc. > dmi.bios.version: 1004 > dmi.board.asset.tag: To Be Filled By O.E.M. > dmi.board.name: P5L-MX > dmi.board.vendor: ASUSTeK Computer INC. > dmi.board.version: Rev x.xx > dmi.chassis.asset.tag: Asset-1234567890 > dmi.chassis.type: 3 > dmi.chassis.vendor: ASUSTek Computer INC. > dmi.chassis.version: Rev 1.xx > dmi.modalias: > dmi:bvnAmericanMegatrendsInc.:bvr1004:bd06/05/2007:svnASUSTekComputerINC.:pnP5L-MX:pvrRev1.xx:rvnASUSTeKComputerINC.:rnP5L-MX:rvrRevx.xx:cvnASUSTekComputerINC.:ct3:cvrRev1.xx: > dmi.product.name: P5L-MX > dmi.product.version: Rev 1.xx > dmi.sys.vendor: ASUSTek Computer INC. > > To manage notifications about this bug go to: > https://bugs.launchpad.net/ubuntu/+source/linux/+bug/976964/+subscriptions > -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/976964 Title: BUG: unable to handle kernel NULL pointer dereference at 0000000000000008; RIP: 0010:[<ffffffff812dc33b>] [<ffffffff812dc33b>] crypto_larval_kill+0x2b/0x90 To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/976964/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
