I add the output of dmesg after trying : [ 1791.320000] set_level status: 0 [ 1791.368000] set_level status: 0 [ 1791.412000] set_level status: 0 [ 1791.456000] set_level status: 0 [ 1791.496000] set_level status: 0 [ 1791.532000] set_level status: 0 [ 1791.596000] set_level status: 0 [ 1791.632000] set_level status: 0 [ 1791.672000] set_level status: 0 [ 1791.708000] set_level status: 0 [ 1791.800000] set_level status: 0 [ 1792.092000] set_level status: 0 [ 1792.120000] set_level status: 0 [ 1792.140000] set_level status: 0 [ 1792.160000] set_level status: 0 [ 1792.180000] set_level status: 0 [ 1792.200000] set_level status: 0 [ 1792.220000] set_level status: 0 [ 1792.240000] set_level status: 0 [ 1792.268000] set_level status: 0 [ 2233.304000] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 2233.812000] input: Lid Switch as /class/input/input18 [ 2233.828000] ACPI: Lid Switch [LID] [ 2233.868000] input: Power Button (CM) as /class/input/input19 [ 2233.880000] ACPI: Power Button (CM) [PBTN] [ 2233.920000] input: Sleep Button (CM) as /class/input/input20 [ 2233.932000] ACPI: Sleep Button (CM) [SBTN] [ 2234.244000] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 2237.240000] b44: eth0: Link is up at 100 Mbps, full duplex. [ 2237.240000] b44: eth0: Flow control is off for TX and off for RX. [ 2237.240000] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
** Description changed: When i click on g-p-m applet in order to enter in sleeping mode, i have an error. The laptop don't want to enter in this mode. I gave you the output of an lspci, a dmesg after trying to sleep, a - uname -a and an output of dmidecode - - * lspci : - - 00:00.0 0600: 8086:27a0 (rev 03) - Subsystem: 1028:01d4 - Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- - Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- - Latency: 0 - Capabilities: [e0] Vendor Specific Information - - 00:02.0 0300: 8086:27a2 (rev 03) (prog-if 00 [VGA]) - Subsystem: 1028:01d4 - Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- - Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- - Latency: 0 - Interrupt: pin A routed to IRQ 16 - Region 0: Memory at eff00000 (32-bit, non-prefetchable) [size=512K] - Region 1: I/O ports at eff8 [size=8] - Region 2: Memory at d0000000 (32-bit, prefetchable) [size=256M] - Region 3: Memory at efec0000 (32-bit, non-prefetchable) [size=256K] - Capabilities: [90] Message Signalled Interrupts: Mask- 64bit- Queue=0/0 Enable- - Address: 00000000 Data: 0000 - Capabilities: [d0] Power Management version 2 - Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) - Status: D0 PME-Enable- DSel=0 DScale=0 PME- - - 00:02.1 0380: 8086:27a6 (rev 03) - Subsystem: 1028:01d4 - Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- - Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- - Latency: 0 - Region 0: Memory at eff80000 (32-bit, non-prefetchable) [size=512K] - Capabilities: [d0] Power Management version 2 - Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) - Status: D0 PME-Enable- DSel=0 DScale=0 PME- - - 00:1b.0 0403: 8086:27d8 (rev 01) - Subsystem: 1028:01d4 - Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- - Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- - Latency: 0, Cache Line Size: 64 bytes - Interrupt: pin A routed to IRQ 20 - Region 0: Memory at efebc000 (64-bit, non-prefetchable) [size=16K] - Capabilities: [50] Power Management version 2 - Flags: PMEClk- DSI- D1- D2- AuxCurrent=55mA PME(D0+,D1-,D2-,D3hot+,D3cold+) - Status: D0 PME-Enable- DSel=0 DScale=0 PME- - Capabilities: [60] Message Signalled Interrupts: Mask- 64bit+ Queue=0/0 Enable- - Address: 0000000000000000 Data: 0000 - Capabilities: [70] Express Unknown type IRQ 0 - Device: Supported: MaxPayload 128 bytes, PhantFunc 0, ExtTag- - Device: Latency L0s <64ns, L1 <1us - Device: Errors: Correctable- Non-Fatal- Fatal- Unsupported- - Device: RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop+ - Device: MaxPayload 128 bytes, MaxReadReq 128 bytes - Link: Supported Speed unknown, Width x0, ASPM unknown, Port 0 - Link: Latency L0s <64ns, L1 <1us - Link: ASPM Disabled CommClk- ExtSynch- - Link: Speed unknown, Width x0 - Capabilities: [100] Virtual Channel - Capabilities: [130] Unknown (5) - - 00:1c.0 0604: 8086:27d0 (rev 01) (prog-if 00 [Normal decode]) - Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- - Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- - Latency: 0, Cache Line Size: 64 bytes - Bus: primary=00, secondary=0b, subordinate=0b, sec-latency=0 - Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR- - BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B- - Capabilities: [40] Express Root Port (Slot+) IRQ 0 - Device: Supported: MaxPayload 128 bytes, PhantFunc 0, ExtTag- - Device: Latency L0s unlimited, L1 unlimited - Device: Errors: Correctable+ Non-Fatal+ Fatal+ Unsupported+ - Device: RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop- - Device: MaxPayload 128 bytes, MaxReadReq 128 bytes - Link: Supported Speed 2.5Gb/s, Width x1, ASPM L0s L1, Port 1 - Link: Latency L0s <1us, L1 <4us - Link: ASPM Disabled RCB 64 bytes CommClk- ExtSynch- - Link: Speed 2.5Gb/s, Width x0 - Slot: AtnBtn- PwrCtrl- MRL- AtnInd- PwrInd- HotPlug+ Surpise+ - Slot: Number 2, PowerLimit 6.500000 - Slot: Enabled AtnBtn- PwrFlt- MRL- PresDet+ CmdCplt- HPIrq- - Slot: AttnInd Unknown, PwrInd Unknown, Power- - Root: Correctable- Non-Fatal- Fatal- PME- - Capabilities: [80] Message Signalled Interrupts: Mask- 64bit- Queue=0/0 Enable+ - Address: fee0100c Data: 41c1 - Capabilities: [90] Subsystem: 1028:01d4 - Capabilities: [a0] Power Management version 2 - Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+) - Status: D0 PME-Enable- DSel=0 DScale=0 PME- - Capabilities: [100] Virtual Channel - Capabilities: [180] Unknown (5) - - 00:1c.1 0604: 8086:27d2 (rev 01) (prog-if 00 [Normal decode]) - Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- - Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- - Latency: 0, Cache Line Size: 64 bytes - Bus: primary=00, secondary=0c, subordinate=0c, sec-latency=0 - Memory behind bridge: efd00000-efdfffff - Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR- - BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B- - Capabilities: [40] Express Root Port (Slot+) IRQ 0 - Device: Supported: MaxPayload 128 bytes, PhantFunc 0, ExtTag- - Device: Latency L0s unlimited, L1 unlimited - Device: Errors: Correctable+ Non-Fatal+ Fatal+ Unsupported+ - Device: RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop- - Device: MaxPayload 128 bytes, MaxReadReq 128 bytes - Link: Supported Speed 2.5Gb/s, Width x1, ASPM L0s L1, Port 2 - Link: Latency L0s <256ns, L1 <4us - Link: ASPM L1 Enabled RCB 64 bytes CommClk+ ExtSynch- - Link: Speed 2.5Gb/s, Width x1 - Slot: AtnBtn- PwrCtrl- MRL- AtnInd- PwrInd- HotPlug+ Surpise+ - Slot: Number 3, PowerLimit 6.500000 - Slot: Enabled AtnBtn- PwrFlt- MRL- PresDet+ CmdCplt- HPIrq- - Slot: AttnInd Unknown, PwrInd Unknown, Power- - Root: Correctable- Non-Fatal- Fatal- PME- - Capabilities: [80] Message Signalled Interrupts: Mask- 64bit- Queue=0/0 Enable+ - Address: fee0100c Data: 41c9 - Capabilities: [90] Subsystem: 1028:01d4 - Capabilities: [a0] Power Management version 2 - Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+) - Status: D0 PME-Enable- DSel=0 DScale=0 PME- - Capabilities: [100] Virtual Channel - Capabilities: [180] Unknown (5) - - 00:1d.0 0c03: 8086:27c8 (rev 01) (prog-if 00 [UHCI]) - Subsystem: 1028:01d4 - Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- - Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- - Latency: 0 - Interrupt: pin A routed to IRQ 19 - Region 4: I/O ports at bf80 [size=32] - - 00:1d.1 0c03: 8086:27c9 (rev 01) (prog-if 00 [UHCI]) - Subsystem: 1028:01d4 - Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- - Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- - Latency: 0 - Interrupt: pin B routed to IRQ 20 - Region 4: I/O ports at bf60 [size=32] - - 00:1d.2 0c03: 8086:27ca (rev 01) (prog-if 00 [UHCI]) - Subsystem: 1028:01d4 - Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- - Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- - Latency: 0 - Interrupt: pin C routed to IRQ 21 - Region 4: I/O ports at bf40 [size=32] - - 00:1d.3 0c03: 8086:27cb (rev 01) (prog-if 00 [UHCI]) - Subsystem: 1028:01d4 - Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- - Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- - Latency: 0 - Interrupt: pin D routed to IRQ 22 - Region 4: I/O ports at bf20 [size=32] - - 00:1d.7 0c03: 8086:27cc (rev 01) (prog-if 20 [EHCI]) - Subsystem: 1028:01d4 - Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- - Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- - Latency: 0 - Interrupt: pin A routed to IRQ 19 - Region 0: Memory at ffa80000 (32-bit, non-prefetchable) [size=1K] - Capabilities: [50] Power Management version 2 - Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA PME(D0+,D1-,D2-,D3hot+,D3cold+) - Status: D0 PME-Enable- DSel=0 DScale=0 PME- - Capabilities: [58] Debug port - - 00:1e.0 0604: 8086:2448 (rev e1) (prog-if 01 [Subtractive decode]) - Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- - Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- - Latency: 0 - Bus: primary=00, secondary=02, subordinate=06, sec-latency=32 - I/O behind bridge: 00002000-00002fff - Memory behind bridge: efc00000-efcfffff - Prefetchable memory behind bridge: 0000000050000000-0000000053ffffff - Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR+ - BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B- - Capabilities: [50] Subsystem: 1028:01d4 - - 00:1f.0 0601: 8086:27b9 (rev 01) - Subsystem: 1028:01d4 - Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- - Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- - Latency: 0 - Capabilities: [e0] Vendor Specific Information - - 00:1f.2 0101: 8086:27c4 (rev 01) (prog-if 80 [Master]) - Subsystem: 1028:01d4 - Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- - Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- - Latency: 0 - Interrupt: pin B routed to IRQ 17 - Region 0: I/O ports at 01f0 [size=8] - Region 1: I/O ports at 03f4 [size=1] - Region 2: I/O ports at 0170 [size=8] - Region 3: I/O ports at 0374 [size=1] - Region 4: I/O ports at bfa0 [size=16] - Capabilities: [70] Power Management version 2 - Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot+,D3cold-) - Status: D0 PME-Enable- DSel=0 DScale=0 PME- - - 00:1f.3 0c05: 8086:27da (rev 01) - Subsystem: 1028:01d4 - Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- - Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- - Interrupt: pin B routed to IRQ 17 - Region 4: I/O ports at 10c0 [size=32] - - 02:00.0 0200: 14e4:170c (rev 02) - Subsystem: 1028:01d4 - Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- - Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- - Latency: 64 - Interrupt: pin A routed to IRQ 17 - Region 0: Memory at efcfe000 (32-bit, non-prefetchable) [size=8K] - Capabilities: [40] Power Management version 2 - Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+) - Status: D0 PME-Enable- DSel=0 DScale=2 PME- - - 02:01.0 0607: 1217:7135 (rev 21) - Subsystem: 1028:01d4 - Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping+ SERR- FastB2B- - Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=slow >TAbort- <TAbort- <MAbort- >SERR- <PERR- - Latency: 168 - Interrupt: pin A routed to IRQ 18 - Region 0: Memory at efc00000 (32-bit, non-prefetchable) [size=4K] - Bus: primary=02, secondary=03, subordinate=06, sec-latency=176 - Memory window 0: 50000000-53fff000 (prefetchable) - Memory window 1: 54000000-57fff000 - I/O window 0: 00002000-000020ff - I/O window 1: 00002400-000024ff - BridgeCtl: Parity- SERR- ISA- VGA- MAbort- >Reset+ 16bInt+ PostWrite+ - 16-bit legacy interface ports at 0001 - - 02:01.4 0c00: 1217:00f7 (rev 02) (prog-if 10 [OHCI]) - Subsystem: 1028:01d4 - Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B- - Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- - Latency: 64, Cache Line Size: 64 bytes - Interrupt: pin A routed to IRQ 18 - Region 0: Memory at efcfd000 (32-bit, non-prefetchable) [size=4K] - Region 1: Memory at efcfc800 (32-bit, non-prefetchable) [size=2K] - Capabilities: [60] Power Management version 2 - Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+) - Status: D0 PME-Enable- DSel=0 DScale=0 PME+ - - 0c:00.0 0280: 8086:4222 (rev 02) - Subsystem: 8086:1021 - Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- - Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- - Latency: 0, Cache Line Size: 64 bytes - Interrupt: pin A routed to IRQ 17 - Region 0: Memory at efdff000 (32-bit, non-prefetchable) [size=4K] - Capabilities: [c8] Power Management version 2 - Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+) - Status: D0 PME-Enable- DSel=0 DScale=0 PME- - Capabilities: [d0] Message Signalled Interrupts: Mask- 64bit+ Queue=0/0 Enable- - Address: 0000000000000000 Data: 0000 - Capabilities: [e0] Express Legacy Endpoint IRQ 0 - Device: Supported: MaxPayload 128 bytes, PhantFunc 0, ExtTag- - Device: Latency L0s <512ns, L1 unlimited - Device: AtnBtn- AtnInd- PwrInd- - Device: Errors: Correctable- Non-Fatal- Fatal- Unsupported- - Device: RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+ - Device: MaxPayload 128 bytes, MaxReadReq 128 bytes - Link: Supported Speed 2.5Gb/s, Width x1, ASPM L0s L1, Port 0 - Link: Latency L0s <128ns, L1 <64us - Link: ASPM L1 Enabled RCB 64 bytes CommClk+ ExtSynch- - Link: Speed 2.5Gb/s, Width x1 - Capabilities: [100] Advanced Error Reporting - Capabilities: [140] Device Serial Number 7c-45-3d-ff-ff-d2-19-00 - - * uname -a : - - Linux venus 2.6.22-6-generic #1 SMP Fri Jun 1 19:24:12 GMT 2007 i686 - GNU/Linux - - * dmidecode : - - # dmidecode 2.9 - SMBIOS 2.4 present. - 61 structures occupying 2698 bytes. - Table at 0x000F70C0. - - Handle 0xDA00, DMI type 218, 251 bytes - OEM-specific Type - Header and Data: - DA FB 00 DA B2 00 0D 5F 1F 37 40 7D 00 00 00 00 - 00 7E 00 02 00 00 00 40 00 04 00 01 00 41 00 04 - 00 00 00 90 00 05 00 00 00 91 00 05 00 01 00 92 - 00 05 00 02 00 65 00 06 00 00 00 66 00 06 00 01 - 00 5E 00 07 00 01 00 5F 00 07 00 00 00 F1 00 08 - 00 00 00 F2 00 08 00 01 00 F3 00 08 00 02 00 0F - 00 09 00 00 00 11 00 09 00 01 00 05 00 09 00 02 - 00 12 00 09 00 03 00 06 00 09 00 04 00 31 00 0A - 00 00 00 32 00 0A 00 01 00 33 00 0A 00 02 00 34 - 00 0A 00 03 00 35 00 0A 00 04 00 07 00 0B 00 00 - 00 0B 00 0B 00 01 00 0C 00 0B 00 02 00 0D 00 0B - 00 03 00 89 01 0C 00 00 00 8A 01 0C 00 01 00 42 - 00 0D 00 01 00 43 00 0D 00 00 00 55 00 0E 00 00 - 00 6D 00 0E 00 01 00 98 01 0E 00 02 00 0A 01 0F - 00 01 00 0B 01 0F 00 00 00 2D 00 10 00 02 00 6E - 00 10 00 01 00 FF FF 00 00 00 00 - - Handle 0xDA01, DMI type 218, 251 bytes - OEM-specific Type - Header and Data: - DA FB 01 DA B2 00 0D 5F 1F 37 40 2E 00 10 00 00 - 00 11 01 11 00 00 00 10 01 11 00 01 00 F0 00 12 - 00 01 00 ED 00 12 00 00 00 41 01 13 00 01 00 40 - 01 13 00 00 00 47 01 14 00 01 00 46 01 14 00 00 - 00 4A 01 15 00 00 00 4B 01 15 00 01 00 52 01 16 - 00 01 00 53 01 16 00 00 00 80 01 17 00 01 00 7F - 01 17 00 00 00 94 01 18 00 00 00 93 01 18 00 01 - 00 86 01 19 00 01 00 85 01 19 00 00 00 82 01 1A - 00 01 00 81 01 1A 00 00 00 9B 01 1B 00 00 00 9C - 01 1B 00 01 00 9D 01 1B 00 02 00 9E 01 1B 00 03 - 00 8D 01 1C 00 00 00 8E 01 1C 00 01 00 EA 00 1D - 00 00 00 EB 00 1D 00 01 00 EC 00 1D 00 02 00 28 - 00 1E 00 00 00 29 00 1E 00 01 00 2A 00 1E 00 02 - 00 2B 00 1F 00 00 00 2C 00 20 00 00 00 E7 00 21 - 00 01 00 E6 00 21 00 00 00 0E 01 22 00 01 00 0F - 01 22 00 00 00 FF FF 00 00 00 00 - - Handle 0xDA02, DMI type 218, 173 bytes - OEM-specific Type - Header and Data: - DA AD 02 DA B2 00 0D 5F 1F 37 40 9B 00 23 00 01 - 00 9C 00 23 00 00 00 87 00 24 00 01 00 88 00 24 - 00 00 00 00 00 25 00 01 00 00 00 25 00 00 00 E8 - 00 26 00 01 00 E9 00 26 00 00 00 51 01 27 00 00 - 00 50 01 27 00 01 00 12 01 28 00 01 00 13 01 28 - 00 00 00 9A 01 29 00 01 00 99 01 29 00 00 00 01 - 01 2A 00 00 00 02 01 2A 00 01 00 04 01 2A 00 02 - 00 00 80 00 80 01 00 00 A0 00 A0 01 00 05 80 05 - 80 01 00 76 01 76 01 01 00 75 01 75 01 01 00 01 - F0 01 F0 00 00 02 F0 02 F0 00 00 03 F0 03 F0 00 - 00 04 F0 04 F0 00 00 FF FF 00 00 00 00 - - Handle 0x0000, DMI type 0, 24 bytes - BIOS Information - Vendor: Dell Inc. - Version: A04 - Release Date: 12/18/2006 - Address: 0xF0000 - Runtime Size: 64 kB - ROM Size: 576 kB - Characteristics: - ISA is supported - PCI is supported - PC Card (PCMCIA) is supported - PNP is supported - BIOS is upgradeable - BIOS shadowing is allowed - Boot from CD is supported - Selectable boot is supported - 3.5"/720 KB floppy services are supported (int 13h) - Print screen service is supported (int 5h) - 8042 keyboard services are supported (int 9h) - Serial services are supported (int 14h) - Printer services are supported (int 17h) - CGA/mono video services are supported (int 10h) - ACPI is supported - USB legacy is supported - AGP is supported - Smart battery is supported - BIOS boot specification is supported - Function key-initiated network boot is supported - Targeted content distribution is supported - BIOS Revision: 0.4 - Firmware Revision: 0.4 - - Handle 0x0100, DMI type 1, 27 bytes - System Information - Manufacturer: Dell Inc. - Product Name: Latitude D520 - Version: Not Specified - Serial Number: HXX1R2J - UUID: 44454C4C-5800-1058-8031-C8C04F52324A - Wake-up Type: Power Switch - SKU Number: Not Specified - Family: - - Handle 0x0200, DMI type 2, 9 bytes - Base Board Information - Manufacturer: Dell Inc. - Product Name: 0PF493 - Version: - Serial Number: .HXX1R2J.CN486436BA1055. - - Handle 0x0300, DMI type 3, 13 bytes - Chassis Information - Manufacturer: Dell Inc. - Type: Portable - Lock: Not Present - Version: Not Specified - Serial Number: HXX1R2J - Asset Tag: Not Specified - Boot-up State: Safe - Power Supply State: Safe - Thermal State: Safe - Security Status: None - - Handle 0x0301, DMI type 126, 13 bytes - Inactive - - Handle 0x0400, DMI type 4, 40 bytes - Processor Information - Socket Designation: Microprocessor - Type: Central Processor - Family: Pentium M - Manufacturer: Intel - ID: E8 06 00 00 FF FB E9 AF - Signature: Type 0, Family 6, Model 14, Stepping 8 - Flags: - FPU (Floating-point unit on-chip) - VME (Virtual mode extension) - DE (Debugging extension) - PSE (Page size extension) - TSC (Time stamp counter) - MSR (Model specific registers) - PAE (Physical address extension) - MCE (Machine check exception) - CX8 (CMPXCHG8 instruction supported) - APIC (On-chip APIC hardware supported) - SEP (Fast system call) - MTRR (Memory type range registers) - PGE (Page global enable) - MCA (Machine check architecture) - CMOV (Conditional move instruction supported) - PAT (Page attribute table) - CLFSH (CLFLUSH instruction supported) - DS (Debug store) - ACPI (ACPI supported) - MMX (MMX technology supported) - FXSR (Fast floating-point save and restore) - SSE (Streaming SIMD extensions) - SSE2 (Streaming SIMD extensions 2) - SS (Self-snoop) - TM (Thermal monitor supported) - PBE (Pending break enabled) - Version: Not Specified - Voltage: 3.3 V - External Clock: 133 MHz - Max Speed: 2160 MHz - Current Speed: 1733 MHz - Status: Populated, Enabled - Upgrade: None - L1 Cache Handle: 0x0700 - L2 Cache Handle: 0x0701 - L3 Cache Handle: Not Provided - Serial Number: Not Specified - Asset Tag: Not Specified - Part Number: Not Specified - Core Count: 1 - Core Enabled: 1 - Thread Count: 1 - Characteristics: None - - Handle 0x0700, DMI type 7, 19 bytes - Cache Information - Socket Designation: Not Specified - Configuration: Enabled, Not Socketed, Level 1 - Operational Mode: Write Back - Location: Internal - Installed Size: 32 KB - Maximum Size: 32 KB - Supported SRAM Types: - Unknown - Installed SRAM Type: Unknown - Speed: Unknown - Error Correction Type: None - System Type: Data - Associativity: 4-way Set-associative - - Handle 0x0701, DMI type 7, 19 bytes - Cache Information - Socket Designation: Not Specified - Configuration: Enabled, Not Socketed, Level 2 - Operational Mode: Varies With Memory Address - Location: Internal - Installed Size: 1024 KB - Maximum Size: 1024 KB - Supported SRAM Types: - Pipeline Burst - Installed SRAM Type: Pipeline Burst - Speed: 15 ns - Error Correction Type: None - System Type: Unified - Associativity: Other - - Handle 0x0800, DMI type 126, 9 bytes - Inactive - - Handle 0x0801, DMI type 8, 9 bytes - Port Connector Information - Internal Reference Designator: SERIAL1 - Internal Connector Type: None - External Reference Designator: Not Specified - External Connector Type: DB-9 male - Port Type: Serial Port 16550A Compatible - - Handle 0x0803, DMI type 126, 9 bytes - Inactive - - Handle 0x0804, DMI type 8, 9 bytes - Port Connector Information - Internal Reference Designator: USB - Internal Connector Type: None - External Reference Designator: Not Specified - External Connector Type: Access Bus (USB) - Port Type: USB - - Handle 0x0805, DMI type 126, 9 bytes - Inactive - - Handle 0x0806, DMI type 8, 9 bytes - Port Connector Information - Internal Reference Designator: MONITOR - Internal Connector Type: None - External Reference Designator: Not Specified - External Connector Type: DB-15 female - Port Type: Video Port - - Handle 0x0808, DMI type 126, 9 bytes - Inactive - - Handle 0x0809, DMI type 8, 9 bytes - Port Connector Information - Internal Reference Designator: IrDA - Internal Connector Type: None - External Reference Designator: Not Specified - External Connector Type: Infrared - Port Type: Other - - Handle 0x080A, DMI type 126, 9 bytes - Inactive - - Handle 0x080B, DMI type 8, 9 bytes - Port Connector Information - Internal Reference Designator: FireWire - Internal Connector Type: None - External Reference Designator: Not Specified - External Connector Type: IEEE 1394 - Port Type: Firewire (IEEE P1394) - - Handle 0x080C, DMI type 8, 9 bytes - Port Connector Information - Internal Reference Designator: Modem - Internal Connector Type: None - External Reference Designator: Not Specified - External Connector Type: RJ-11 - Port Type: Modem Port - - Handle 0x080D, DMI type 8, 9 bytes - Port Connector Information - Internal Reference Designator: Ethernet - Internal Connector Type: None - External Reference Designator: Not Specified - External Connector Type: RJ-45 - Port Type: Network Port - - Handle 0x0900, DMI type 9, 13 bytes - System Slot Information - Designation: PCMCIA 0 - Type: 32-bit PC Card (PCMCIA) - Current Usage: Available - Length: Other - ID: Adapter 0, Socket 0 - Characteristics: - 5.0 V is provided - 3.3 V is provided - PC Card-16 is supported - Cardbus is supported - Zoom Video is supported - Modem ring resume is supported - - Handle 0x0902, DMI type 126, 13 bytes - Inactive - - Handle 0x0A00, DMI type 10, 6 bytes - On Board Device Information - Type: Video - Status: Enabled - Description: Intel 945GM/940GML Graphics - - Handle 0x0A01, DMI type 10, 6 bytes - On Board Device Information - Type: Sound - Status: Enabled - Description: Sigmatel 9200 - - Handle 0x0B00, DMI type 11, 5 bytes - OEM Strings - String 1: Dell System - String 2: 5[0002] - String 3: 13[PP17L] - - Handle 0x0D00, DMI type 13, 22 bytes - BIOS Language Information - Installable Languages: 1 - en|US|iso8859-1 - Currently Installed Language: en|US|iso8859-1 - - Handle 0x1000, DMI type 16, 15 bytes - Physical Memory Array - Location: System Board Or Motherboard - Use: System Memory - Error Correction Type: None - Maximum Capacity: 4 GB - Error Information Handle: Not Provided - Number Of Devices: 2 - - Handle 0x1100, DMI type 17, 27 bytes - Memory Device - Array Handle: 0x1000 - Error Information Handle: Not Provided - Total Width: 64 bits - Data Width: 64 bits - Size: No Module Installed - Form Factor: DIMM - Set: None - Locator: DIMM_B - Bank Locator: Not Specified - Type: DDR - Type Detail: Synchronous - Speed: Unknown - Manufacturer: - Serial Number: - Asset Tag: - Part Number: - - Handle 0x1101, DMI type 17, 27 bytes - Memory Device - Array Handle: 0x1000 - Error Information Handle: Not Provided - Total Width: 64 bits - Data Width: 64 bits - Size: 1024 MB - Form Factor: DIMM - Set: None - Locator: DIMM_A - Bank Locator: Not Specified - Type: DDR - Type Detail: Synchronous - Speed: 533 MHz (1.9 ns) - Manufacturer: 4000000000000000 - Serial Number: 7DD30A81 - Asset Tag: 000701 - Part Number: V916765G24QBFW-E4 - - Handle 0x1300, DMI type 19, 15 bytes - Memory Array Mapped Address - Starting Address: 0x00000000000 - Ending Address: 0x0000009FFFF - Range Size: 640 kB - Physical Array Handle: 0x1000 - Partition Width: 0 - - Handle 0x1301, DMI type 19, 15 bytes - Memory Array Mapped Address - Starting Address: 0x00000100000 - Ending Address: 0x0003FFFFFFF - Range Size: 1023 MB - Physical Array Handle: 0x1000 - Partition Width: 0 - - Handle 0x1400, DMI type 20, 19 bytes - Memory Device Mapped Address - Starting Address: 0x00000000000 - Ending Address: 0x0000009FFFF - Range Size: 640 kB - Physical Device Handle: 0x1101 - Memory Array Mapped Address Handle: 0x1300 - Partition Row Position: 1 - - Handle 0x1401, DMI type 20, 19 bytes - Memory Device Mapped Address - Starting Address: 0x00000100000 - Ending Address: 0x0003FFFFFFF - Range Size: 1023 MB - Physical Device Handle: 0x1101 - Memory Array Mapped Address Handle: 0x1301 - Partition Row Position: 1 - - Handle 0x1402, DMI type 126, 19 bytes - Inactive - - Handle 0x1500, DMI type 21, 7 bytes - Built-in Pointing Device - Type: Touch Pad - Interface: Bus Mouse - Buttons: 2 - - Handle 0x1600, DMI type 22, 26 bytes - Portable Battery - Location: Sys. Battery Bay - Manufacturer: SMP - Name: DELL K97266C - Design Capacity: 52000 mWh - Design Voltage: 11100 mV - SBDS Version: 1.0 - Maximum Error: 3% - SBDS Serial Number: 078E - SBDS Manufacture Date: 2006-12-04 - SBDS Chemistry: LION - OEM-specific Information: 0x00000001 - - Handle 0x1601, DMI type 126, 26 bytes - Inactive - - Handle 0x1602, DMI type 126, 26 bytes - Inactive - - Handle 0x1B00, DMI type 27, 12 bytes - Cooling Device - Type: Fan - Status: OK - OEM-specific Information: 0x0000DD00 - - Handle 0x1C00, DMI type 28, 20 bytes - Temperature Probe - Description: CPU Internal Temperature - Location: Processor - Status: OK - Maximum Value: 127.0 deg C - Minimum Value 0.0 deg C - Resolution: 1.000 deg C - Tolerance: 0.5 deg C - Accuracy: Unknown - OEM-specific Information: 0x0000DC00 - - Handle 0x2000, DMI type 32, 11 bytes - System Boot Information - Status: No errors detected - - Handle 0xB000, DMI type 176, 5 bytes - OEM-specific Type - Header and Data: - B0 05 00 B0 32 - - Handle 0xB100, DMI type 177, 12 bytes - OEM-specific Type - Header and Data: - B1 0C 00 B1 03 00 00 00 00 00 00 00 - - Handle 0xB200, DMI type 178, 6 bytes - OEM-specific Type - Header and Data: - B2 06 00 B2 E7 0C - - Handle 0xD000, DMI type 208, 10 bytes - OEM-specific Type - Header and Data: - D0 0A 00 D0 01 04 FE 00 D4 01 - - Handle 0xD100, DMI type 126, 12 bytes - Inactive - - Handle 0xD200, DMI type 210, 12 bytes - OEM-specific Type - Header and Data: - D2 0C 00 D2 F8 03 04 03 06 80 04 05 - - Handle 0xD300, DMI type 211, 13 bytes - OEM-specific Type - Header and Data: - D3 0D 00 D3 01 04 02 01 00 00 00 00 02 - Strings: - Back of System - - - - Handle 0xD800, DMI type 216, 9 bytes - OEM-specific Type - Header and Data: - D8 09 00 D8 01 03 01 F0 03 - Strings: - Intel Corp. - - 1343 - - Handle 0xD900, DMI type 217, 8 bytes - OEM-specific Type - Header and Data: - D9 08 00 D9 01 02 01 03 - Strings: - US-101 - Proprietary - - Handle 0xDB00, DMI type 219, 9 bytes - OEM-specific Type - Header and Data: - DB 09 00 DB 03 01 02 03 FF - Strings: - System Device Bay - Floppy, Battery, CD-ROM, CD-RW, DVD, DVD+RW, DVD+/-RW, Hard Disk - CDRW+DVD - - Handle 0xDB80, DMI type 126, 9 bytes - Inactive - - Handle 0xDB81, DMI type 126, 9 bytes - Inactive - - Handle 0xDC00, DMI type 220, 22 bytes - OEM-specific Type - Header and Data: - DC 16 00 DC 01 F0 00 00 02 F0 00 00 00 00 03 F0 - 04 F0 00 00 00 00 - - Handle 0xDD00, DMI type 221, 19 bytes - OEM-specific Type - Header and Data: - DD 13 00 DD 00 00 00 00 00 00 00 00 00 00 00 00 - 00 00 00 - - Handle 0xD400, DMI type 212, 37 bytes - OEM-specific Type - Header and Data: - D4 25 00 D4 74 00 75 00 00 10 2D 2E 5C 00 78 BF - 40 5D 00 78 BF 00 08 00 1D DF 00 03 00 1D DF 00 - FF FF 00 00 00 - - Handle 0xDE00, DMI type 222, 13 bytes - OEM-specific Type - Header and Data: - DE 0D 00 DE 01 02 FF FF 00 00 00 00 00 - - Handle 0x7F00, DMI type 127, 4 bytes - End Of Table + uname -a and an output of dmidecode. -- Suspend to RAM (Sleeping) not working on DELL Latitude D520 https://bugs.launchpad.net/bugs/119423 You received this bug notification because you are a member of Ubuntu Bugs, which is the bug contact for Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs