Output files added.
_________________________________________________________________
Descubre Live.com - tu mundo en línea reunido: noticias, deportes, el tiempo, y
mucho más.
http://www.live.com/getstarted
Simple mixer control 'Master',0
Capabilities: pvolume pswitch
Playback channels: Front Left - Front Right
Limits: Playback 0 - 31
Mono:
Front Left: Playback 2 [6%] [-43.50dB] [on]
Front Right: Playback 2 [6%] [-43.50dB] [on]
Simple mixer control 'PCM',0
Capabilities: pvolume
Playback channels: Front Left - Front Right
Limits: Playback 0 - 255
Mono:
Front Left: Playback 255 [100%] [0.00dB]
Front Right: Playback 255 [100%] [0.00dB]
Simple mixer control 'IEC958',0
Capabilities: pswitch pswitch-joined cswitch cswitch-joined
Playback channels: Mono
Capture channels: Mono
Mono: Playback [off] Capture [off]
Simple mixer control 'Capture',0
Capabilities: cvolume cswitch
Capture channels: Front Left - Front Right
Limits: Capture 0 - 15
Front Left: Capture 0 [0%] [0.00dB] [off]
Front Right: Capture 0 [0%] [0.00dB] [off]
Simple mixer control 'Capture Mux',0
Capabilities: volume
Playback channels: Front Left - Front Right
Capture channels: Front Left - Front Right
Limits: 0 - 4
Front Left: 0 [0%] [0.00dB]
Front Right: 0 [0%] [0.00dB]
Simple mixer control 'Input Source',0
Capabilities: enum
Items: 'Mic' 'Front Mic' 'Line'
Item0: 'Mic'
Names of available sound cards:
Intel
[ 0.000000] Linux version 2.6.22-6-generic ([EMAIL PROTECTED]) (gcc version
4.1.3 20070528 (prerelease) (Ubuntu 4.1.2-9ubuntu2)) #1 SMP Fri Jun 1 19:24:12
GMT 2007
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f000 (usable)
[ 0.000000] BIOS-e820: 000000000009f000 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000003f6d3400 (usable)
[ 0.000000] BIOS-e820: 000000003f6d3400 - 0000000040000000 (reserved)
[ 0.000000] BIOS-e820: 00000000f0000000 - 00000000f4007000 (reserved)
[ 0.000000] BIOS-e820: 00000000f4008000 - 00000000f400c000 (reserved)
[ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
[ 0.000000] BIOS-e820: 00000000fed20000 - 00000000feda0000 (reserved)
[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee10000 (reserved)
[ 0.000000] BIOS-e820: 00000000ffb00000 - 0000000100000000 (reserved)
[ 0.000000] 118MB HIGHMEM available.
[ 0.000000] 896MB LOWMEM available.
[ 0.000000] Entering add_active_range(0, 0, 259795) 0 entries of 256 used
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0 -> 4096
[ 0.000000] Normal 4096 -> 229376
[ 0.000000] HighMem 229376 -> 259795
[ 0.000000] early_node_map[1] active PFN ranges
[ 0.000000] 0: 0 -> 259795
[ 0.000000] On node 0 totalpages: 259795
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 4064 pages, LIFO batch:0
[ 0.000000] Normal zone: 1760 pages used for memmap
[ 0.000000] Normal zone: 223520 pages, LIFO batch:31
[ 0.000000] HighMem zone: 237 pages used for memmap
[ 0.000000] HighMem zone: 30182 pages, LIFO batch:7
[ 0.000000] DMI 2.4 present.
[ 0.000000] ACPI: RSDP 000FC1B0, 0014 (r0 DELL )
[ 0.000000] ACPI: RSDT 3F6D39CD, 0040 (r1 DELL M07 27D70205 ASL
61)
[ 0.000000] ACPI: FACP 3F6D4800, 0074 (r1 DELL M07 27D70205 ASL
61)
[ 0.000000] ACPI: DSDT 3F6D5400, 4841 (r1 INT430 SYSFexxx 1001 INTL
20050624)
[ 0.000000] ACPI: FACS 3F6E3C00, 0040
[ 0.000000] ACPI: HPET 3F6D4F00, 0038 (r1 DELL M07 1 ASL
61)
[ 0.000000] ACPI: APIC 3F6D5000, 0068 (r1 DELL M07 27D70205 ASL
47)
[ 0.000000] ACPI: MCFG 3F6D4FC0, 003E (r16 DELL M07 27D70205 ASL
61)
[ 0.000000] ACPI: SLIC 3F6D509C, 0176 (r1 DELL M07 27D70205 ASL
61)
[ 0.000000] ACPI: BOOT 3F6D4BC0, 0028 (r1 DELL M07 27D70205 ASL
61)
[ 0.000000] ACPI: SSDT 3F6D3A0D, 04DC (r1 PmRef CpuPm 3000 INTL
20050624)
[ 0.000000] ACPI: PM-Timer IO Port: 0x1008
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] Processor #0 6:14 APIC version 20
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[ 0.000000] Processor #1 6:14 APIC version 20
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] Allocating PCI resources starting at 50000000 (gap:
40000000:b0000000)
[ 0.000000] Built 1 zonelists. Total pages: 257766
[ 0.000000] Kernel command line:
root=UUID=6b2886e2-2af0-41fc-9262-9d445f42e55b ro quiet splash
[ 0.000000] mapped APIC to ffffd000 (fee00000)
[ 0.000000] mapped IOAPIC to ffffc000 (fec00000)
[ 0.000000] Enabling fast FPU save and restore... done.
[ 0.000000] Enabling unmasked SIMD FPU exception support... done.
[ 0.000000] Initializing CPU#0
[ 0.000000] PID hash table entries: 4096 (order: 12, 16384 bytes)
[ 0.000000] Detected 1729.228 MHz processor.
[ 7.319887] Console: colour VGA+ 80x25
[ 7.320409] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 7.321416] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 7.398865] Memory: 1018832k/1039180k available (2002k kernel code, 19636k
reserved, 913k data, 360k init, 121676k highmem)
[ 7.398895] virtual kernel memory layout:
[ 7.398898] fixmap : 0xfff4d000 - 0xfffff000 ( 712 kB)
[ 7.398901] pkmap : 0xff800000 - 0xffc00000 (4096 kB)
[ 7.398904] vmalloc : 0xf8800000 - 0xff7fe000 ( 111 MB)
[ 7.398907] lowmem : 0xc0000000 - 0xf8000000 ( 896 MB)
[ 7.398909] .init : 0xc03df000 - 0xc0439000 ( 360 kB)
[ 7.398922] .data : 0xc02f4a8a - 0xc03d90d4 ( 913 kB)
[ 7.398925] .text : 0xc0100000 - 0xc02f4a8a (2002 kB)
[ 7.398932] Checking if this processor honours the WP bit even in supervisor
mode... Ok.
[ 7.399030] SLUB: Genslabs=23, HWalign=64, Order=0-1, MinObjects=4,
Processors=2, Nodes=1
[ 7.399086] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 7.399097] hpet0: 3 64-bit timers, 14318180 Hz
[ 7.480117] Calibrating delay using timer specific routine.. 3466.98
BogoMIPS (lpj=6933972)
[ 7.480163] Security Framework v1.0.0 initialized
[ 7.480185] SELinux: Disabled at boot.
[ 7.480222] Mount-cache hash table entries: 512
[ 7.480530] CPU: After generic identify, caps: bfe9fbff 00100000 00000000
00000000 0000c189 00000000 00000000
[ 7.480547] monitor/mwait feature present.
[ 7.480561] using mwait in idle threads.
[ 7.480569] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 7.480575] CPU: L2 cache: 2048K
[ 7.480580] CPU: Physical Processor ID: 0
[ 7.480594] CPU: Processor Core ID: 0
[ 7.480599] CPU: After all inits, caps: bfe9fbff 00100000 00000000 00002940
0000c189 00000000 00000000
[ 7.480626] Compat vDSO mapped to ffffe000.
[ 7.480658] Checking 'hlt' instruction... OK.
[ 7.496412] SMP alternatives: switching to UP code
[ 7.497363] ACPI: Core revision 20070126
[ 7.505133] CPU0: Intel Genuine Intel(R) CPU T2250 @ 1.73GHz
stepping 08
[ 7.505177] SMP alternatives: switching to SMP code
[ 7.505259] Booting processor 1/1 eip 3000
[ 9.412134] Initializing CPU#1
[ 9.488860] Calibrating delay using timer specific routine.. 3457.96
BogoMIPS (lpj=6915933)
[ 9.488883] CPU: After generic identify, caps: bfe9fbff 00100000 00000000
00000000 0000c189 00000000 00000000
[ 9.488894] monitor/mwait feature present.
[ 9.488901] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 9.488916] CPU: L2 cache: 2048K
[ 9.488920] CPU: Physical Processor ID: 0
[ 9.488923] CPU: Processor Core ID: 1
[ 9.488927] CPU: After all inits, caps: bfe9fbff 00100000 00000000 00002940
0000c189 00000000 00000000
[ 7.597277] CPU1: Intel Genuine Intel(R) CPU T2250 @ 1.73GHz
stepping 08
[ 7.597339] Total of 2 processors activated (6924.95 BogoMIPS).
[ 7.597657] ENABLING IO-APIC IRQs
[ 7.597980] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 7.744230] checking TSC synchronization [CPU#0 -> CPU#1]:
[ 7.764261] Measured 3274041914 cycles TSC warp between CPUs, turning off
TSC clock.
[ 0.236000] Marking TSC unstable due to: check_tsc_sync_source failed.
[ 0.240000] Brought up 2 CPUs
[ 0.312000] migration_cost=4000
[ 0.312000] Booting paravirtualized kernel on bare hardware
[ 0.316000] Time: 15:27:29 Date: 05/11/107
[ 0.316000] NET: Registered protocol family 16
[ 0.316000] EISA bus registered
[ 0.316000] ACPI: bus type pci registered
[ 0.316000] PCI: Using MMCONFIG
[ 0.316000] Setting up standard PCI resources
[ 0.344000] ACPI: Interpreter enabled
[ 0.344000] ACPI: (supports S0 S3 S4 S5)
[ 0.344000] ACPI: Using IOAPIC for interrupt routing
[ 0.388000] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 0.388000] PCI: Probing PCI hardware (bus 00)
[ 0.392000] PCI quirk: region 1000-107f claimed by ICH6 ACPI/GPIO/TCO
[ 0.392000] PCI quirk: region 1080-10bf claimed by ICH6 GPIO
[ 0.392000] PCI: Transparent bridge - 0000:00:1e.0
[ 0.392000] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.396000] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIE._PRT]
[ 0.396000] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
[ 0.396000] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT]
[ 0.396000] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP04._PRT]
[ 0.424000] ACPI: PCI Interrupt Link [LNKA] (IRQs 9 10 *11)
[ 0.424000] ACPI: PCI Interrupt Link [LNKB] (IRQs 5 7) *4
[ 0.424000] ACPI: PCI Interrupt Link [LNKC] (IRQs 9 10 *11)
[ 0.424000] ACPI: PCI Interrupt Link [LNKD] (IRQs 5 7 9 10 11) *3
[ 0.424000] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 *9 10 11 12 14
15)
[ 0.424000] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 *10 11 12 14
15)
[ 0.424000] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 *7 9 10 11 12 14
15)
[ 0.424000] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 *5 6 7 9 10 11 12 14
15)
[ 0.424000] Linux Plug and Play Support v0.97 (c) Adam Belay
[ 0.424000] pnp: PnP ACPI init
[ 0.424000] ACPI: bus type pnp registered
[ 0.488000] pnp: PnP ACPI: found 12 devices
[ 0.488000] ACPI: ACPI bus type pnp unregistered
[ 0.488000] PnPBIOS: Disabled by ACPI PNP
[ 0.488000] PCI: Using ACPI for IRQ routing
[ 0.488000] PCI: If a device doesn't work, try "pci=routeirq". If it helps,
post a report
[ 0.488000] NET: Registered protocol family 8
[ 0.488000] NET: Registered protocol family 20
[ 0.488000] pnp: 00:00: iomem range 0x0-0x9fbff could not be reserved
[ 0.488000] pnp: 00:00: iomem range 0x9fc00-0x9ffff could not be reserved
[ 0.488000] pnp: 00:00: iomem range 0xc0000-0xcffff could not be reserved
[ 0.488000] pnp: 00:00: iomem range 0xe0000-0xfffff could not be reserved
[ 0.488000] pnp: 00:02: ioport range 0x4d0-0x4d1 has been reserved
[ 0.488000] pnp: 00:02: ioport range 0x1000-0x1005 has been reserved
[ 0.488000] pnp: 00:02: ioport range 0x1008-0x100f has been reserved
[ 0.488000] pnp: 00:03: ioport range 0xf400-0xf4fe has been reserved
[ 0.488000] pnp: 00:03: ioport range 0x1006-0x1007 has been reserved
[ 0.488000] pnp: 00:03: ioport range 0x100a-0x1059 could not be reserved
[ 0.488000] pnp: 00:03: ioport range 0x1060-0x107f has been reserved
[ 0.488000] pnp: 00:03: ioport range 0x1080-0x10bf has been reserved
[ 0.488000] pnp: 00:03: ioport range 0x10c0-0x10df has been reserved
[ 0.488000] pnp: 00:08: ioport range 0xc80-0xcff could not be reserved
[ 0.488000] pnp: 00:08: ioport range 0x910-0x91f has been reserved
[ 0.488000] pnp: 00:08: ioport range 0x920-0x92f has been reserved
[ 0.488000] pnp: 00:08: ioport range 0xcb0-0xcbf has been reserved
[ 0.488000] pnp: 00:08: ioport range 0x930-0x97f has been reserved
[ 0.488000] pnp: 00:0b: iomem range 0xfed00000-0xfed003ff could not be
reserved
[ 0.492000] Time: hpet clocksource has been installed.
[ 0.492000] Switched to high resolution mode on CPU 0
[ 0.492000] Switched to high resolution mode on CPU 1
[ 0.520000] PCI: Bridge: 0000:00:1c.0
[ 0.520000] IO window: disabled.
[ 0.520000] MEM window: disabled.
[ 0.520000] PREFETCH window: disabled.
[ 0.520000] PCI: Bridge: 0000:00:1c.1
[ 0.520000] IO window: disabled.
[ 0.520000] MEM window: efd00000-efdfffff
[ 0.520000] PREFETCH window: disabled.
[ 0.520000] PCI: Bridge: 0000:00:1c.3
[ 0.520000] IO window: d000-dfff
[ 0.520000] MEM window: efa00000-efcfffff
[ 0.520000] PREFETCH window: e0000000-e01fffff
[ 0.520000] PCI: Bridge: 0000:00:1e.0
[ 0.520000] IO window: disabled.
[ 0.520000] MEM window: ef900000-ef9fffff
[ 0.520000] PREFETCH window: disabled.
[ 0.520000] ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 16 (level, low) ->
IRQ 16
[ 0.520000] PCI: Setting latency timer of device 0000:00:1c.0 to 64
[ 0.520000] ACPI: PCI Interrupt 0000:00:1c.1[B] -> GSI 17 (level, low) ->
IRQ 17
[ 0.520000] PCI: Setting latency timer of device 0000:00:1c.1 to 64
[ 0.520000] ACPI: PCI Interrupt 0000:00:1c.3[D] -> GSI 19 (level, low) ->
IRQ 18
[ 0.520000] PCI: Setting latency timer of device 0000:00:1c.3 to 64
[ 0.520000] PCI: Setting latency timer of device 0000:00:1e.0 to 64
[ 0.520000] NET: Registered protocol family 2
[ 0.568000] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.568000] TCP established hash table entries: 131072 (order: 8, 1572864
bytes)
[ 0.568000] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.568000] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.568000] TCP reno registered
[ 0.584000] checking if image is initramfs... it is
[ 1.968000] Freeing initrd memory: 6809k freed
[ 1.968000] Simple Boot Flag at 0x79 set to 0x1
[ 1.972000] audit: initializing netlink socket (disabled)
[ 1.972000] audit(1181575649.492:1): initialized
[ 1.972000] highmem bounce pool size: 64 pages
[ 1.976000] VFS: Disk quotas dquot_6.5.1
[ 1.976000] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 1.976000] io scheduler noop registered
[ 1.976000] io scheduler anticipatory registered
[ 1.976000] io scheduler deadline registered
[ 1.976000] io scheduler cfq registered (default)
[ 1.976000] Boot video device is 0000:00:02.0
[ 1.976000] PCI: Setting latency timer of device 0000:00:1c.0 to 64
[ 1.976000] assign_interrupt_mode Found MSI capability
[ 1.976000] Allocate Port Service[0000:00:1c.0:pcie00]
[ 1.976000] Allocate Port Service[0000:00:1c.0:pcie02]
[ 1.976000] Allocate Port Service[0000:00:1c.0:pcie03]
[ 1.976000] PCI: Setting latency timer of device 0000:00:1c.1 to 64
[ 1.976000] assign_interrupt_mode Found MSI capability
[ 1.976000] Allocate Port Service[0000:00:1c.1:pcie00]
[ 1.976000] Allocate Port Service[0000:00:1c.1:pcie02]
[ 1.976000] Allocate Port Service[0000:00:1c.1:pcie03]
[ 1.976000] PCI: Setting latency timer of device 0000:00:1c.3 to 64
[ 1.976000] assign_interrupt_mode Found MSI capability
[ 1.976000] Allocate Port Service[0000:00:1c.3:pcie00]
[ 1.976000] Allocate Port Service[0000:00:1c.3:pcie02]
[ 1.976000] Allocate Port Service[0000:00:1c.3:pcie03]
[ 1.976000] isapnp: Scanning for PnP cards...
[ 2.332000] isapnp: No Plug & Play device found
[ 2.376000] Real Time Clock Driver v1.12ac
[ 2.376000] hpet_resources: 0xfed00000 is busy
[ 2.376000] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing
enabled
[ 2.380000] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024
blocksize
[ 2.380000] input: Macintosh mouse button emulation as /class/input/input0
[ 2.380000] PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:PS2M] at 0x60,0x64 irq
1,12
[ 2.384000] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 2.384000] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 2.384000] mice: PS/2 mouse device common for all mice
[ 2.384000] EISA: Probing bus 0 at eisa.0
[ 2.384000] EISA: Mainboard BW_FFFF detected.
[ 2.384000] Cannot allocate resource for EISA slot 1
[ 2.384000] EISA: Detected 0 cards.
[ 2.384000] TCP cubic registered
[ 2.384000] NET: Registered protocol family 1
[ 2.384000] Using IPI No-Shortcut mode
[ 2.384000] Magic number: 11:342:487
[ 2.384000] Freeing unused kernel memory: 360k freed
[ 2.388000] input: AT Translated Set 2 keyboard as /class/input/input1
[ 3.804000] Capability LSM initialized
[ 3.824000] ACPI: SSDT 3F6D4134, 0244 (r1 PmRef Cpu0Ist 3000 INTL
20050624)
[ 3.824000] ACPI: SSDT 3F6D3EE9, 01C6 (r1 PmRef Cpu0Cst 3001 INTL
20050624)
[ 3.824000] ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
[ 3.824000] ACPI: Processor [CPU0] (supports 8 throttling states)
[ 3.828000] ACPI: SSDT 3F6D4378, 00C4 (r1 PmRef Cpu1Ist 3000 INTL
20050624)
[ 3.828000] ACPI: SSDT 3F6D40AF, 0085 (r1 PmRef Cpu1Cst 3000 INTL
20050624)
[ 3.828000] ACPI: CPU1 (power states: C1[C1] C2[C2] C3[C3])
[ 3.828000] ACPI: Processor [CPU1] (supports 8 throttling states)
[ 3.836000] ACPI: Thermal Zone [THM] (34 C)
[ 4.724000] usbcore: registered new interface driver usbfs
[ 4.724000] usbcore: registered new interface driver hub
[ 4.724000] usbcore: registered new device driver usb
[ 4.724000] USB Universal Host Controller Interface driver v3.0
[ 4.724000] ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 20 (level, low) ->
IRQ 19
[ 4.724000] PCI: Setting latency timer of device 0000:00:1d.0 to 64
[ 4.724000] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 4.724000] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus
number 1
[ 4.724000] uhci_hcd 0000:00:1d.0: irq 19, io base 0x0000bf80
[ 4.724000] usb usb1: configuration #1 chosen from 1 choice
[ 4.724000] hub 1-0:1.0: USB hub found
[ 4.724000] hub 1-0:1.0: 2 ports detected
[ 4.736000] SCSI subsystem initialized
[ 4.748000] libata version 2.21 loaded.
[ 4.828000] ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 21 (level, low) ->
IRQ 20
[ 4.828000] PCI: Setting latency timer of device 0000:00:1d.1 to 64
[ 4.828000] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 4.828000] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus
number 2
[ 4.828000] uhci_hcd 0000:00:1d.1: irq 20, io base 0x0000bf60
[ 4.828000] usb usb2: configuration #1 chosen from 1 choice
[ 4.828000] hub 2-0:1.0: USB hub found
[ 4.828000] hub 2-0:1.0: 2 ports detected
[ 4.932000] ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 22 (level, low) ->
IRQ 21
[ 4.932000] PCI: Setting latency timer of device 0000:00:1d.2 to 64
[ 4.932000] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 4.932000] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus
number 3
[ 4.932000] uhci_hcd 0000:00:1d.2: irq 21, io base 0x0000bf40
[ 4.932000] usb usb3: configuration #1 chosen from 1 choice
[ 4.932000] hub 3-0:1.0: USB hub found
[ 4.932000] hub 3-0:1.0: 2 ports detected
[ 5.036000] ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 23 (level, low) ->
IRQ 22
[ 5.036000] PCI: Setting latency timer of device 0000:00:1d.3 to 64
[ 5.036000] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[ 5.036000] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus
number 4
[ 5.036000] uhci_hcd 0000:00:1d.3: irq 22, io base 0x0000bf20
[ 5.036000] usb usb4: configuration #1 chosen from 1 choice
[ 5.036000] hub 4-0:1.0: USB hub found
[ 5.036000] hub 4-0:1.0: 2 ports detected
[ 5.068000] usb 1-1: new full speed USB device using uhci_hcd and address 2
[ 5.140000] ata_piix 0000:00:1f.2: version 2.11
[ 5.140000] ata_piix 0000:00:1f.2: MAP [ P0 P2 IDE IDE ]
[ 5.140000] ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 17 (level, low) ->
IRQ 17
[ 5.140000] PCI: Setting latency timer of device 0000:00:1f.2 to 64
[ 5.140000] scsi0 : ata_piix
[ 5.140000] scsi1 : ata_piix
[ 5.140000] ata1: SATA max UDMA/133 cmd 0x000101f0 ctl 0x000103f6 bmdma
0x0001bfa0 irq 14
[ 5.140000] ata2: PATA max UDMA/100 cmd 0x00010170 ctl 0x00010376 bmdma
0x0001bfa8 irq 15
[ 5.212000] usb 1-1: configuration #1 chosen from 1 choice
[ 5.216000] hub 1-1:1.0: USB hub found
[ 5.220000] hub 1-1:1.0: 4 ports detected
[ 5.328000] ata1.00: ata_hpa_resize 1: sectors = 153356490, hpa_sectors =
156301488
[ 5.328000] ata1.00: Host Protected Area detected:
[ 5.328000] current size: 153356490 sectors
[ 5.328000] native size: 156301488 sectors
[ 5.328000] ata1.00: ATA-7: Hitachi HTS541080G9SA00, MB4OC60R, max UDMA/100
[ 5.328000] ata1.00: 153356490 sectors, multi 8: LBA48 NCQ (depth 0/32)
[ 5.336000] ata1.00: ata_hpa_resize 1: sectors = 153356490, hpa_sectors =
156301488
[ 5.336000] ata1.00: Host Protected Area detected:
[ 5.336000] current size: 153356490 sectors
[ 5.336000] native size: 156301488 sectors
[ 5.336000] ata1.00: configured for UDMA/100
[ 5.500000] Clocksource tsc unstable (delta = -278853935 ns)
[ 5.688000] ata2.00: ATAPI, max UDMA/33
[ 5.852000] ata2.00: configured for UDMA/33
[ 5.852000] scsi 0:0:0:0: Direct-Access ATA Hitachi HTS54108 MB4O
PQ: 0 ANSI: 5
[ 5.852000] scsi 1:0:0:0: CD-ROM SONY DVD+-RW DW-Q58A UDS2
PQ: 0 ANSI: 5
[ 5.856000] b44.c:v1.01 (Jun 16, 2006)
[ 5.856000] ACPI: PCI Interrupt 0000:03:00.0[A] -> GSI 17 (level, low) ->
IRQ 17
[ 5.860000] eth0: Broadcom 4400 10/100BaseT Ethernet 00:15:c5:3d:88:31
[ 5.860000] ACPI: PCI Interrupt 0000:03:01.0[A] -> GSI 19 (level, low) ->
IRQ 18
[ 5.912000] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[18]
MMIO=[ef9fd800-ef9fdfff] Max Packet=[2048] IR/IT contexts=[4/4]
[ 5.916000] ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 20 (level, low) ->
IRQ 19
[ 5.916000] PCI: Setting latency timer of device 0000:00:1d.7 to 64
[ 5.916000] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 5.916000] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus
number 5
[ 5.916000] ehci_hcd 0000:00:1d.7: debug port 1
[ 5.916000] PCI: cache line size of 32 is not supported by device
0000:00:1d.7
[ 5.916000] ehci_hcd 0000:00:1d.7: irq 19, io mem 0xffa80000
[ 5.920000] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec
2004
[ 5.920000] usb usb5: configuration #1 chosen from 1 choice
[ 5.920000] hub 5-0:1.0: USB hub found
[ 5.920000] hub 5-0:1.0: 8 ports detected
[ 5.932000] sd 0:0:0:0: [sda] 153356490 512-byte hardware sectors (78519 MB)
[ 5.932000] sd 0:0:0:0: [sda] Write Protect is off
[ 5.932000] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 5.932000] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled,
doesn't support DPO or FUA
[ 5.936000] sd 0:0:0:0: [sda] 153356490 512-byte hardware sectors (78519 MB)
[ 5.936000] sd 0:0:0:0: [sda] Write Protect is off
[ 5.936000] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 5.936000] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled,
doesn't support DPO or FUA
[ 5.936000] sda: sda1 sda2 sda3 < sda5 sda6 >
[ 5.980000] sd 0:0:0:0: [sda] Attached SCSI disk
[ 5.988000] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 5.988000] sr 1:0:0:0: Attached scsi generic sg1 type 5
[ 5.996000] sr0: scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda tray
[ 5.996000] Uniform CD-ROM driver Revision: 3.20
[ 5.996000] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 6.272000] usb 5-1: new high speed USB device using ehci_hcd and address 2
[ 6.316000] Attempting manual resume
[ 6.316000] swsusp: Resume From Partition 8:5
[ 6.316000] PM: Checking swsusp image.
[ 6.316000] PM: Resume from disk failed.
[ 6.336000] EXT3-fs: INFO: recovery required on readonly filesystem.
[ 6.336000] EXT3-fs: write access will be enabled during recovery.
[ 6.404000] usb 5-1: configuration #1 chosen from 1 choice
[ 6.404000] hub 5-1:1.0: USB hub found
[ 6.404000] hub 5-1:1.0: 4 ports detected
[ 6.508000] usb 1-1: USB disconnect, address 2
[ 7.188000] ieee1394: Host added: ID:BUS[0-00:1023] GUID[374fc000390cad41]
[ 8.128000] kjournald starting. Commit interval 5 seconds
[ 8.128000] EXT3-fs: recovery complete.
[ 8.128000] EXT3-fs: mounted filesystem with ordered data mode.
[ 19.772000] NET: Registered protocol family 17
[ 20.100000] Linux agpgart interface v0.102 (c) Dave Jones
[ 20.116000] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 20.128000] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 20.680000] agpgart: Detected an Intel 945GM Chipset.
[ 20.684000] agpgart: Detected 7932K stolen memory.
[ 20.704000] agpgart: AGP aperture is 256M @ 0xd0000000
[ 20.804000] input: PC Speaker as /class/input/input2
[ 21.204000] ieee80211_crypt: registered algorithm 'NULL'
[ 21.220000] intel_rng: FWH not detected
[ 21.292000] Synaptics Touchpad, model: 1, fw: 6.2, id: 0xfa0b1, caps:
0xa04713/0x200000
[ 21.328000] input: SynPS/2 Synaptics TouchPad as /class/input/input3
[ 21.420000] sdhci: Secure Digital Host Controller Interface driver
[ 21.420000] sdhci: Copyright(c) Pierre Ossman
[ 21.420000] sdhci: SDHCI controller found at 0000:03:01.1 [1180:0822] (rev
19)
[ 21.420000] ACPI: PCI Interrupt 0000:03:01.1[B] -> GSI 18 (level, low) ->
IRQ 23
[ 21.420000] mmc0: SDHCI at 0xef9fd400 irq 23 DMA
[ 21.464000] iTCO_vendor_support: vendor-support=0
[ 21.464000] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.01 (21-Jan-2007)
[ 21.468000] iTCO_wdt: Found a ICH7-M TCO device (Version=2, TCOBASE=0x1060)
[ 21.468000] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 21.580000] ieee80211: 802.11 data/management/control stack, git-1.1.13
[ 21.580000] ieee80211: Copyright (C) 2004-2005 Intel Corporation <[EMAIL
PROTECTED]>
[ 21.672000] ipw3945: Intel(R) PRO/Wireless 3945 Network Connection driver
for Linux, 1.2.1mp
[ 21.672000] ipw3945: Copyright(c) 2003-2006 Intel Corporation
[ 21.676000] ACPI: PCI Interrupt 0000:0c:00.0[A] -> GSI 17 (level, low) ->
IRQ 17
[ 21.676000] PCI: Setting latency timer of device 0000:0c:00.0 to 64
[ 21.676000] ipw3945: Detected Intel PRO/Wireless 3945ABG Network Connection
[ 21.784000] ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 21 (level, low) ->
IRQ 20
[ 21.784000] PCI: Setting latency timer of device 0000:00:1b.0 to 64
[ 22.688000] fuse init (API version 7.8)
[ 22.796000] lp: driver loaded but no devices found
[ 22.908000] Adding 2329384k swap on
/dev/disk/by-uuid/df543dd1-a41b-470b-82a8-9d5923f0df18. Priority:-1 extents:1
across:2329384k
[ 23.100000] EXT3 FS on sda6, internal journal
[ 23.604000] ipw3945: Detected geography ABG (11 802.11bg channels, 13
802.11a channels)
[ 60.916000] NET: Registered protocol family 10
[ 60.916000] lo: Disabled Privacy Extensions
[ 60.920000] ADDRCONF(NETDEV_UP): eth2: link is not ready
[ 124.168000] NTFS driver 2.1.28 [Flags: R/O MODULE].
[ 124.276000] NTFS volume version 3.1.
[ 124.304000] kjournald starting. Commit interval 5 seconds
[ 124.304000] EXT3 FS on sda2, internal journal
[ 124.304000] EXT3-fs: mounted filesystem with ordered data mode.
[ 130.908000] toshiba_acpi: Unknown parameter `hotkeys_over_acpi'
[ 130.948000] set_level status: 0
[ 130.952000] ACPI: Video Device [VID] (multi-head: yes rom: no post: no)
[ 130.964000] set_level status: 0
[ 130.964000] ACPI: Video Device [VID] (multi-head: yes rom: no post: no)
[ 130.964000] ACPI: Video Device [VID2] (multi-head: yes rom: no post: no)
[ 131.012000] input: Lid Switch as /class/input/input4
[ 131.012000] ACPI: Lid Switch [LID]
[ 131.012000] input: Power Button (CM) as /class/input/input5
[ 131.012000] ACPI: Power Button (CM) [PBTN]
[ 131.032000] input: Sleep Button (CM) as /class/input/input6
[ 131.032000] ACPI: Sleep Button (CM) [SBTN]
[ 131.108000] No dock devices found.
[ 131.200000] ACPI: AC Adapter [AC] (off-line)
[ 131.260000] ACPI: Battery Slot [BAT0] (battery present)
[ 133.096000] ADDRCONF(NETDEV_UP): eth3: link is not ready
[ 137.032000] [drm] Initialized drm 1.1.0 20060810
[ 137.036000] ACPI: PCI Interrupt 0000:00:02.0[A] -> GSI 16 (level, low) ->
IRQ 16
[ 137.036000] [drm] Initialized i915 1.6.0 20060119 on minor 0
[ 165.168000] ieee80211_crypt: registered algorithm 'WEP'
[ 166.236000] ADDRCONF(NETDEV_CHANGE): eth3: link becomes ready
[ 181.016000] eth3: no IPv6 routers present
[ 468.980000] WARNING: at
/build/buildd/linux-source-2.6.22-2.6.22/include/linux/slub_def.h:77
kmalloc_index()
[ 468.980000] [<c017d403>] get_slab+0x1b3/0x230
[ 468.980000] [<c017d546>] __kmalloc+0x16/0xa0
[ 468.980000] [<c01fdcfe>] copy_from_user+0x2e/0x70
[ 468.980000] [<f8de3024>] drm_rmdraw+0x2b4/0x2e0 [drm]
[ 468.980000] [<f8de2d70>] drm_rmdraw+0x0/0x2e0 [drm]
[ 468.980000] [<f8de3b92>] drm_ioctl+0xb2/0x200 [drm]
[ 468.980000] [<c018cdc8>] do_ioctl+0x78/0x90
[ 468.980000] [<c018ce3c>] vfs_ioctl+0x5c/0x290
[ 468.980000] [<c018d0e2>] sys_ioctl+0x72/0x90
[ 468.980000] [<c01041d2>] sysenter_past_esp+0x6b/0xa9
[ 468.980000] =======================
CPU0 CPU1
0: 214294 0 IO-APIC-edge timer
1: 3143 0 IO-APIC-edge i8042
8: 5 0 IO-APIC-edge rtc
9: 2 0 IO-APIC-fasteoi acpi
12: 301605 0 IO-APIC-edge i8042
14: 42620 0 IO-APIC-edge libata
15: 12363 0 IO-APIC-edge libata
16: 70793 0 IO-APIC-fasteoi [EMAIL PROTECTED]:0000:00:02.0
17: 61778 0 IO-APIC-fasteoi eth2, ipw3945
18: 2 0 IO-APIC-fasteoi ohci1394
19: 58 0 IO-APIC-fasteoi uhci_hcd:usb1, ehci_hcd:usb5
20: 1367 0 IO-APIC-fasteoi uhci_hcd:usb2, HDA Intel
21: 0 0 IO-APIC-fasteoi uhci_hcd:usb3
22: 0 0 IO-APIC-fasteoi uhci_hcd:usb4
23: 0 0 IO-APIC-fasteoi sdhci:slot0
NMI: 0 0
LOC: 28362 131687
ERR: 0
MIS: 0
00:00.0 0600: 8086:27a0 (rev 03)
Subsystem: 1028:01cd
Flags: bus master, fast devsel, latency 0
Capabilities: [e0] Vendor Specific Information
00:02.0 0300: 8086:27a2 (rev 03) (prog-if 00 [VGA])
Subsystem: 1028:01cd
Flags: bus master, fast devsel, latency 0, IRQ 16
Memory at eff00000 (32-bit, non-prefetchable) [size=512K]
I/O ports at eff8 [size=8]
Memory at d0000000 (32-bit, prefetchable) [size=256M]
Memory at efec0000 (32-bit, non-prefetchable) [size=256K]
Capabilities: [90] Message Signalled Interrupts: Mask- 64bit- Queue=0/0
Enable-
Capabilities: [d0] Power Management version 2
00:02.1 0380: 8086:27a6 (rev 03)
Subsystem: 1028:01cd
Flags: bus master, fast devsel, latency 0
Memory at eff80000 (32-bit, non-prefetchable) [size=512K]
Capabilities: [d0] Power Management version 2
00:1b.0 0403: 8086:27d8 (rev 01)
Subsystem: 1028:01cd
Flags: bus master, fast devsel, latency 0, IRQ 20
Memory at efebc000 (64-bit, non-prefetchable) [size=16K]
Capabilities: [50] Power Management version 2
Capabilities: [60] Message Signalled Interrupts: Mask- 64bit+ Queue=0/0
Enable-
Capabilities: [70] Express Unknown type IRQ 0
Capabilities: [100] Virtual Channel
Capabilities: [130] Unknown (5)
00:1c.0 0604: 8086:27d0 (rev 01) (prog-if 00 [Normal decode])
Flags: bus master, fast devsel, latency 0
Bus: primary=00, secondary=0b, subordinate=0b, sec-latency=0
Capabilities: [40] Express Root Port (Slot+) IRQ 0
Capabilities: [80] Message Signalled Interrupts: Mask- 64bit- Queue=0/0
Enable+
Capabilities: [90] Subsystem: 1028:01cd
Capabilities: [a0] Power Management version 2
Capabilities: [100] Virtual Channel
Capabilities: [180] Unknown (5)
00:1c.1 0604: 8086:27d2 (rev 01) (prog-if 00 [Normal decode])
Flags: bus master, fast devsel, latency 0
Bus: primary=00, secondary=0c, subordinate=0c, sec-latency=0
Memory behind bridge: efd00000-efdfffff
Capabilities: [40] Express Root Port (Slot+) IRQ 0
Capabilities: [80] Message Signalled Interrupts: Mask- 64bit- Queue=0/0
Enable+
Capabilities: [90] Subsystem: 1028:01cd
Capabilities: [a0] Power Management version 2
Capabilities: [100] Virtual Channel
Capabilities: [180] Unknown (5)
00:1c.3 0604: 8086:27d6 (rev 01) (prog-if 00 [Normal decode])
Flags: bus master, fast devsel, latency 0
Bus: primary=00, secondary=0d, subordinate=0e, sec-latency=0
I/O behind bridge: 0000d000-0000dfff
Memory behind bridge: efa00000-efcfffff
Prefetchable memory behind bridge: 00000000e0000000-00000000e01fffff
Capabilities: [40] Express Root Port (Slot+) IRQ 0
Capabilities: [80] Message Signalled Interrupts: Mask- 64bit- Queue=0/0
Enable+
Capabilities: [90] Subsystem: 1028:01cd
Capabilities: [a0] Power Management version 2
Capabilities: [100] Virtual Channel
Capabilities: [180] Unknown (5)
00:1d.0 0c03: 8086:27c8 (rev 01) (prog-if 00 [UHCI])
Subsystem: 1028:01cd
Flags: bus master, medium devsel, latency 0, IRQ 19
I/O ports at bf80 [size=32]
00:1d.1 0c03: 8086:27c9 (rev 01) (prog-if 00 [UHCI])
Subsystem: 1028:01cd
Flags: bus master, medium devsel, latency 0, IRQ 20
I/O ports at bf60 [size=32]
00:1d.2 0c03: 8086:27ca (rev 01) (prog-if 00 [UHCI])
Subsystem: 1028:01cd
Flags: bus master, medium devsel, latency 0, IRQ 21
I/O ports at bf40 [size=32]
00:1d.3 0c03: 8086:27cb (rev 01) (prog-if 00 [UHCI])
Subsystem: 1028:01cd
Flags: bus master, medium devsel, latency 0, IRQ 22
I/O ports at bf20 [size=32]
00:1d.7 0c03: 8086:27cc (rev 01) (prog-if 20 [EHCI])
Subsystem: 1028:01cd
Flags: bus master, medium devsel, latency 0, IRQ 19
Memory at ffa80000 (32-bit, non-prefetchable) [size=1K]
Capabilities: [50] Power Management version 2
Capabilities: [58] Debug port
00:1e.0 0604: 8086:2448 (rev e1) (prog-if 01 [Subtractive decode])
Flags: bus master, fast devsel, latency 0
Bus: primary=00, secondary=03, subordinate=03, sec-latency=32
Memory behind bridge: ef900000-ef9fffff
Capabilities: [50] Subsystem: 1028:01cd
00:1f.0 0601: 8086:27b9 (rev 01)
Subsystem: 1028:01cd
Flags: bus master, medium devsel, latency 0
Capabilities: [e0] Vendor Specific Information
00:1f.2 0101: 8086:27c4 (rev 01) (prog-if 80 [Master])
Subsystem: 1028:01cd
Flags: bus master, 66MHz, medium devsel, latency 0, IRQ 17
I/O ports at 01f0 [size=8]
I/O ports at 03f4 [size=1]
I/O ports at 0170 [size=8]
I/O ports at 0374 [size=1]
I/O ports at bfa0 [size=16]
Capabilities: [70] Power Management version 2
00:1f.3 0c05: 8086:27da (rev 01)
Subsystem: 1028:01cd
Flags: medium devsel, IRQ 4
I/O ports at 10c0 [size=32]
03:00.0 0200: 14e4:170c (rev 02)
Subsystem: 1028:01cd
Flags: bus master, fast devsel, latency 64, IRQ 17
Memory at ef9fe000 (32-bit, non-prefetchable) [size=8K]
Capabilities: [40] Power Management version 2
03:01.0 0c00: 1180:0832 (prog-if 10 [OHCI])
Subsystem: 1028:01cd
Flags: bus master, medium devsel, latency 64, IRQ 18
Memory at ef9fd800 (32-bit, non-prefetchable) [size=2K]
Capabilities: [dc] Power Management version 2
03:01.1 0805: 1180:0822 (rev 19) (prog-if 01)
Subsystem: 1028:01cd
Flags: bus master, medium devsel, latency 64, IRQ 23
Memory at ef9fd400 (32-bit, non-prefetchable) [size=256]
Capabilities: [80] Power Management version 2
03:01.2 0880: 1180:0843 (rev 01)
Subsystem: 1028:01cd
Flags: bus master, medium devsel, latency 0, IRQ 11
Memory at ef9fd500 (32-bit, non-prefetchable) [size=256]
Capabilities: [80] Power Management version 2
03:01.3 0880: 1180:0592 (rev 0a)
Subsystem: 1028:01cd
Flags: medium devsel, IRQ 11
Memory at ef9fd600 (32-bit, non-prefetchable) [size=256]
Capabilities: [80] Power Management version 2
03:01.4 0880: 1180:0852 (rev 05)
Subsystem: 1028:01cd
Flags: medium devsel, IRQ 11
Memory at ef9fd700 (32-bit, non-prefetchable) [size=256]
Capabilities: [80] Power Management version 2
0c:00.0 0280: 8086:4222 (rev 02)
Subsystem: 8086:1020
Flags: bus master, fast devsel, latency 0, IRQ 17
Memory at efdff000 (32-bit, non-prefetchable) [size=4K]
Capabilities: [c8] Power Management version 2
Capabilities: [d0] Message Signalled Interrupts: Mask- 64bit+ Queue=0/0
Enable-
Capabilities: [e0] Express Legacy Endpoint IRQ 0
Capabilities: [100] Advanced Error Reporting
Capabilities: [140] Device Serial Number d1-f7-af-ff-ff-02-13-00
Mixers:
0: SigmaTel STAC9200
--
[gutsy] no LFE in hda-intel + sigmatel stac9200
https://bugs.launchpad.net/bugs/119457
You received this bug notification because you are a member of Ubuntu
Bugs, which is the bug contact for Ubuntu.
--
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
