Here is some information about the UA-101 audio interface: There is a hardware switch to select the sampling rate: * 44,1 kHz * 48 kHz * 88,2 kHz * 96 kHz * 192 kHz The sampling rate selected by the switch will be applied when the device is turned on and cannot be changed while the device remains powered on. When the switch is changed while the device is on power, the sampling rate will not be applied until the device gets power-cycled. It is not possible to change sampling rate by software.
For autodetection, pulseaudio could try the sampling rates, beginning with 192 kHz, to see, if the alsa device accepts the sampling rate and then choose the one which is accepted. When using 192kHz, 6 channels are supported, for the other frequencies, 10 channels are supported. -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/986817 Title: UA-101 - UA-101, playback Pulseaudio fails to detect card To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/pulseaudio/+bug/986817/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs