Public bug reported:

 tail -2 /proc/asound/oss/sndstat

Mixers: NOT ENABLED IN CONFIG

 amixer
amixer: Mixer attach default error: No such device

 lspci -nv
00:00.0 0600: 8086:2a00 (rev 0c)
        Subsystem: 1028:01f9
        Flags: bus master, fast devsel, latency 0
        Capabilities: <access denied>

00:02.0 0300: 8086:2a02 (rev 0c) (prog-if 00 [VGA])
        Subsystem: 1028:01f9
        Flags: bus master, fast devsel, latency 0, IRQ 16
        Memory at fea00000 (64-bit, non-prefetchable) [size=1M]
        Memory at e0000000 (64-bit, prefetchable) [size=256M]
        I/O ports at efe8 [size=8]
        Capabilities: <access denied>

00:02.1 0380: 8086:2a03 (rev 0c)
        Subsystem: 1028:01f9
        Flags: bus master, fast devsel, latency 0
        Memory at feb00000 (64-bit, non-prefetchable) [size=1M]
        Capabilities: <access denied>

00:1a.0 0c03: 8086:2834 (rev 02) (prog-if 00 [UHCI])
        Subsystem: 1028:01f9
        Flags: bus master, medium devsel, latency 0, IRQ 20
        I/O ports at 6f20 [size=32]

00:1a.1 0c03: 8086:2835 (rev 02) (prog-if 00 [UHCI])
        Subsystem: 1028:01f9
        Flags: bus master, medium devsel, latency 0, IRQ 21
        I/O ports at 6f00 [size=32]

00:1a.7 0c03: 8086:283a (rev 02) (prog-if 20 [EHCI])
        Subsystem: 1028:01f9
        Flags: bus master, medium devsel, latency 0, IRQ 19
        Memory at fed1c400 (32-bit, non-prefetchable) [size=1K]
        Capabilities: <access denied>

00:1b.0 0403: 8086:284b (rev 02)
        Subsystem: 1028:01f9
        Flags: fast devsel, IRQ 21
        Memory at fe9fc000 (64-bit, non-prefetchable) [size=16K]
        Capabilities: <access denied>

00:1c.0 0604: 8086:283f (rev 02) (prog-if 00 [Normal decode])
        Flags: bus master, fast devsel, latency 0
        Bus: primary=00, secondary=0b, subordinate=0b, sec-latency=0
        Capabilities: <access denied>

00:1c.1 0604: 8086:2841 (rev 02) (prog-if 00 [Normal decode])
        Flags: bus master, fast devsel, latency 0
        Bus: primary=00, secondary=0c, subordinate=0c, sec-latency=0
        Memory behind bridge: fe800000-fe8fffff
        Capabilities: <access denied>

00:1c.5 0604: 8086:2849 (rev 02) (prog-if 00 [Normal decode])
        Flags: bus master, fast devsel, latency 0
        Bus: primary=00, secondary=09, subordinate=09, sec-latency=0
        Memory behind bridge: fe700000-fe7fffff
        Capabilities: <access denied>

00:1d.0 0c03: 8086:2830 (rev 02) (prog-if 00 [UHCI])
        Subsystem: 1028:01f9
        Flags: bus master, medium devsel, latency 0, IRQ 20
        I/O ports at 6f80 [size=32]

00:1d.1 0c03: 8086:2831 (rev 02) (prog-if 00 [UHCI])
        Subsystem: 1028:01f9
        Flags: bus master, medium devsel, latency 0, IRQ 21
        I/O ports at 6f60 [size=32]

00:1d.2 0c03: 8086:2832 (rev 02) (prog-if 00 [UHCI])
        Subsystem: 1028:01f9
        Flags: bus master, medium devsel, latency 0, IRQ 19
        I/O ports at 6f40 [size=32]

00:1d.7 0c03: 8086:2836 (rev 02) (prog-if 20 [EHCI])
        Subsystem: 1028:01f9
        Flags: bus master, medium devsel, latency 0, IRQ 20
        Memory at fed1c000 (32-bit, non-prefetchable) [size=1K]
        Capabilities: <access denied>

00:1e.0 0604: 8086:2448 (rev f2) (prog-if 01 [Subtractive decode])
        Flags: bus master, fast devsel, latency 0
        Bus: primary=00, secondary=03, subordinate=07, sec-latency=32
        I/O behind bridge: 00002000-00002fff
        Memory behind bridge: fe600000-fe6fffff
        Prefetchable memory behind bridge: 0000000070000000-0000000073ffffff
        Capabilities: <access denied>

00:1f.0 0601: 8086:2815 (rev 02)
        Subsystem: 1028:01f9
        Flags: bus master, medium devsel, latency 0
        Capabilities: <access denied>

00:1f.1 0101: 8086:2850 (rev 02) (prog-if 8a [Master SecP PriP])
        Subsystem: 1028:01f9
        Flags: bus master, medium devsel, latency 0, IRQ 11
        I/O ports at 01f0 [size=8]
        I/O ports at 03f4 [size=1]
        I/O ports at 0170 [size=8]
        I/O ports at 0374 [size=1]
        I/O ports at 6fa0 [size=16]

00:1f.2 0101: 8086:2828 (rev 02) (prog-if 8f [Master SecP SecO PriP PriO])
        Subsystem: 1028:01f9
        Flags: bus master, 66MHz, medium devsel, latency 0, IRQ 17
        I/O ports at 6eb0 [size=8]
        I/O ports at 6eb8 [size=4]
        I/O ports at 6ec0 [size=8]
        I/O ports at 6ec8 [size=4]
        I/O ports at 6ee0 [size=16]
        I/O ports at eff0 [size=16]
        Capabilities: <access denied>

00:1f.3 0c05: 8086:283e (rev 02)
        Subsystem: 1028:01f9
        Flags: medium devsel, IRQ 10
        Memory at fe9fbf00 (32-bit, non-prefetchable) [size=256]
        I/O ports at 10c0 [size=32]

03:01.0 0607: 1217:7135 (rev 21)
        Subsystem: 1028:01f9
        Flags: bus master, stepping, slow devsel, latency 168, IRQ 18
        Memory at fe600000 (32-bit, non-prefetchable) [size=4K]
        Bus: primary=03, secondary=04, subordinate=07, sec-latency=176
        Memory window 0: 70000000-73fff000 (prefetchable)
        Memory window 1: 74000000-77fff000
        I/O window 0: 00002000-000020ff
        I/O window 1: 00002400-000024ff
        16-bit legacy interface ports at 0001

03:01.4 0c00: 1217:00f7 (rev 02) (prog-if 10 [OHCI])
        Subsystem: 1028:01f9
        Flags: bus master, medium devsel, latency 64, IRQ 18
        Memory at fe6ff000 (32-bit, non-prefetchable) [size=4K]
        Memory at fe6fe800 (32-bit, non-prefetchable) [size=2K]
        Capabilities: <access denied>

09:00.0 0200: 14e4:1673 (rev 02)
        Subsystem: 1028:01f9
        Flags: bus master, fast devsel, latency 0, IRQ 220
        Memory at fe7f0000 (64-bit, non-prefetchable) [size=64K]
        Capabilities: <access denied>

0c:00.0 0280: 8086:4222 (rev 02)
        Subsystem: 8086:1022
        Flags: bus master, fast devsel, latency 0, IRQ 17
        Memory at fe8ff000 (32-bit, non-prefetchable) [size=4K]
        Capabilities: <access denied>

 asoundconf list
Names of available sound cards:


 cat /etc/asound.conf ~/.asoundrc*
cat: /etc/asound.conf: No such file or directory
cat: /home/bond007/.asoundrc*: No such file or directory

dmesg
[    0.000000] Linux version 2.6.22-7-generic ([EMAIL PROTECTED]) (gcc version 
4.1.3 20070601 (prerelease) (Ubuntu 4.1.2-12ubuntu1)) #1 SMP Mon Jun 25 
17:33:14 GMT 2007
[    0.000000] BIOS-provided physical RAM map:
[    0.000000]  BIOS-e820: 0000000000000000 - 000000000009f000 (usable)
[    0.000000]  BIOS-e820: 000000000009f000 - 00000000000a0000 (reserved)
[    0.000000]  BIOS-e820: 0000000000100000 - 000000005f680400 (usable)
[    0.000000]  BIOS-e820: 000000005f680400 - 0000000060000000 (reserved)
[    0.000000]  BIOS-e820: 00000000f8000000 - 00000000fc000000 (reserved)
[    0.000000]  BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
[    0.000000]  BIOS-e820: 00000000fed18000 - 00000000fed1c000 (reserved)
[    0.000000]  BIOS-e820: 00000000fed20000 - 00000000fed90000 (reserved)
[    0.000000]  BIOS-e820: 00000000feda0000 - 00000000feda6000 (reserved)
[    0.000000]  BIOS-e820: 00000000fee00000 - 00000000fee10000 (reserved)
[    0.000000]  BIOS-e820: 00000000ffe00000 - 0000000100000000 (reserved)
[    0.000000] 630MB HIGHMEM available.
[    0.000000] 896MB LOWMEM available.
[    0.000000] Entering add_active_range(0, 0, 390784) 0 entries of 256 used
[    0.000000] Zone PFN ranges:
[    0.000000]   DMA             0 ->     4096
[    0.000000]   Normal       4096 ->   229376
[    0.000000]   HighMem    229376 ->   390784
[    0.000000] early_node_map[1] active PFN ranges
[    0.000000]     0:        0 ->   390784
[    0.000000] On node 0 totalpages: 390784
[    0.000000]   DMA zone: 32 pages used for memmap
[    0.000000]   DMA zone: 0 pages reserved
[    0.000000]   DMA zone: 4064 pages, LIFO batch:0
[    0.000000]   Normal zone: 1760 pages used for memmap
[    0.000000]   Normal zone: 223520 pages, LIFO batch:31
[    0.000000]   HighMem zone: 1261 pages used for memmap
[    0.000000]   HighMem zone: 160147 pages, LIFO batch:31
[    0.000000] DMI 2.4 present.
[    0.000000] ACPI: RSDP 000FBB00, 0024 (r2 DELL  )
[    0.000000] ACPI: XSDT 5F681E00, 0064 (r1 DELL    M08     27D70512 ASL       
 61)
[    0.000000] ACPI: FACP 5F681C9C, 00F4 (r4 DELL    M08     27D70512 ASL       
 61)
[    0.000000] ACPI: DSDT 5F682400, 6122 (r2 INT430 SYSFexxx     1001 INTL 
20050624)
[    0.000000] ACPI: FACS 5F690C00, 0040
[    0.000000] ACPI: HPET 5F681F00, 0038 (r1 DELL    M08            1 ASL       
 61)
[    0.000000] ACPI: APIC 5F682000, 0068 (r1 DELL    M08     27D70512 ASL       
 47)
[    0.000000] ACPI: ASF! 5F681C00, 007E (r32 DELL    M08     27D70512 ASL      
  61)
[    0.000000] ACPI: MCFG 5F681FC0, 003E (r16 DELL    M08     27D70512 ASL      
  61)
[    0.000000] ACPI: SLIC 5F68209C, 0176 (r1 DELL    M08     27D70512 ASL       
 61)
[    0.000000] ACPI: TCPA 5F682300, 0032 (r1                        0 ASL       
  0)
[    0.000000] ACPI: SSDT 5F680731, 04CC (r1  PmRef    CpuPm     3000 INTL 
20050624)
[    0.000000] ACPI: PM-Timer IO Port: 0x1008
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[    0.000000] Processor #0 6:15 APIC version 20
[    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[    0.000000] Processor #1 6:15 APIC version 20
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[    0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[    0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ2 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Enabling APIC mode:  Flat.  Using 1 I/O APICs
[    0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] Allocating PCI resources starting at 70000000 (gap: 
60000000:98000000)
[    0.000000] Built 1 zonelists.  Total pages: 387731
[    0.000000] Kernel command line: 
root=UUID=781497a3-09da-49af-9953-c6463267c879 ro quiet splash
[    0.000000] mapped APIC to ffffd000 (fee00000)
[    0.000000] mapped IOAPIC to ffffc000 (fec00000)
[    0.000000] Enabling fast FPU save and restore... done.
[    0.000000] Enabling unmasked SIMD FPU exception support... done.
[    0.000000] Initializing CPU#0
[    0.000000] PID hash table entries: 4096 (order: 12, 16384 bytes)
[    0.000000] Detected 1795.760 MHz processor.
[   15.826576] Console: colour VGA+ 80x25
[   15.826849] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[   15.827134] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[   15.875577] Memory: 1538128k/1563136k available (2009k kernel code, 23680k 
reserved, 917k data, 364k init, 645632k highmem)
[   15.875585] virtual kernel memory layout:
[   15.875586]     fixmap  : 0xfff4d000 - 0xfffff000   ( 712 kB)
[   15.875587]     pkmap   : 0xff800000 - 0xffc00000   (4096 kB)
[   15.875588]     vmalloc : 0xf8800000 - 0xff7fe000   ( 111 MB)
[   15.875589]     lowmem  : 0xc0000000 - 0xf8000000   ( 896 MB)
[   15.875590]       .init : 0xc03e1000 - 0xc043c000   ( 364 kB)
[   15.875591]       .data : 0xc02f67d8 - 0xc03dbee4   ( 917 kB)
[   15.875592]       .text : 0xc0100000 - 0xc02f67d8   (2009 kB)
[   15.875595] Checking if this processor honours the WP bit even in supervisor 
mode... Ok.
[   15.875630] SLUB: Genslabs=23, HWalign=64, Order=0-1, MinObjects=4, CPUs=2, 
Nodes=1
[   15.875655] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[   15.875660] hpet0: 3 64-bit timers, 14318180 Hz
[   15.956635] Calibrating delay using timer specific routine.. 3595.15 
BogoMIPS (lpj=7190304)
[   15.956655] Security Framework v1.0.0 initialized
[   15.956661] SELinux:  Disabled at boot.
[   15.956673] Mount-cache hash table entries: 512
[   15.956787] CPU: After generic identify, caps: bfebfbff 20100000 00000000 
00000000 0000e3bd 00000000 00000001
[   15.956795] monitor/mwait feature present.
[   15.956797] using mwait in idle threads.
[   15.956801] CPU: L1 I cache: 32K, L1 D cache: 32K
[   15.956803] CPU: L2 cache: 2048K
[   15.956806] CPU: Physical Processor ID: 0
[   15.956807] CPU: Processor Core ID: 0
[   15.956809] CPU: After all inits, caps: bfebfbff 20100000 00000000 00003940 
0000e3bd 00000000 00000001
[   15.956817] Compat vDSO mapped to ffffe000.
[   15.956829] Checking 'hlt' instruction... OK.
[   15.972722] SMP alternatives: switching to UP code
[   15.973032] ACPI: Core revision 20070126
[   15.977808] CPU0: Intel(R) Core(TM)2 Duo CPU     T7100  @ 1.80GHz stepping 0d
[   15.977824] SMP alternatives: switching to SMP code
[   15.977841] Booting processor 1/1 eip 3000
[   15.988184] Initializing CPU#1
[   16.068569] Calibrating delay using timer specific routine.. 3591.01 
BogoMIPS (lpj=7182032)
[   16.068575] CPU: After generic identify, caps: bfebfbff 20100000 00000000 
00000000 0000e3bd 00000000 00000001
[   16.068579] monitor/mwait feature present.
[   16.068582] CPU: L1 I cache: 32K, L1 D cache: 32K
[   16.068584] CPU: L2 cache: 2048K
[   16.068586] CPU: Physical Processor ID: 0
[   16.068587] CPU: Processor Core ID: 1
[   16.068588] CPU: After all inits, caps: bfebfbff 20100000 00000000 00003940 
0000e3bd 00000000 00000001
[   16.069055] CPU1: Intel(R) Core(TM)2 Duo CPU     T7100  @ 1.80GHz stepping 0d
[   16.069078] Total of 2 processors activated (7186.16 BogoMIPS).
[   16.069278] ENABLING IO-APIC IRQs
[   16.069479] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
[   16.216570] checking TSC synchronization [CPU#0 -> CPU#1]: passed.
[   16.236574] Brought up 2 CPUs
[   16.278649] migration_cost=17
[   16.278765] Booting paravirtualized kernel on bare hardware
[   16.278852] Time: 21:35:37  Date: 06/07/107
[   16.278869] NET: Registered protocol family 16
[   16.278939] EISA bus registered
[   16.278943] ACPI: bus type pci registered
[   16.278952] PCI: Using MMCONFIG
[   16.279784] Setting up standard PCI resources
[   16.314243] ACPI: SSDT 5F690C80, 0043 (r1  LMPWR  DELLLOM     1001 INTL 
20050624)
[   16.314425] ACPI: Interpreter enabled
[   16.314428] ACPI: (supports S0 S3 S4 S5)
[   16.314442] ACPI: Using IOAPIC for interrupt routing
[   16.364100] ACPI: PCI Root Bridge [PCI0] (0000:00)
[   16.364114] PCI: Probing PCI hardware (bus 00)
[   16.365781] PCI: Transparent bridge - 0000:00:1e.0
[   16.365846] PCI: Bus #04 (-#07) is hidden behind transparent bridge #03 
(-#04) (try 'pci=assign-busses')
[   16.365848] Please report the result to linux-kernel to fix this permanently
[   16.365904] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[   16.366341] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIE._PRT]
[   16.366513] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
[   16.366633] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT]
[   16.366755] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP06._PRT]
[   16.384219] ACPI: PCI Interrupt Link [LNKA] (IRQs 9 10 *11)
[   16.384335] ACPI: PCI Interrupt Link [LNKB] (IRQs 5 7) *10
[   16.384467] ACPI: PCI Interrupt Link [LNKC] (IRQs 9 10 11) *0, disabled.
[   16.384581] ACPI: PCI Interrupt Link [LNKD] (IRQs 5 7 9 10 11) *3
[   16.384695] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 *10 11 12 14 
15)
[   16.384810] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 *9 10 11 12 14 
15)
[   16.384924] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 *5 6 7 9 10 11 12 14 
15)
[   16.385029] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 10 11 12 14 
15) *0, disabled.
[   16.385157] Linux Plug and Play Support v0.97 (c) Adam Belay
[   16.385166] pnp: PnP ACPI init
[   16.385175] ACPI: bus type pnp registered
[   16.448174] pnp: PnP ACPI: found 14 devices
[   16.448176] ACPI: ACPI bus type pnp unregistered
[   16.448179] PnPBIOS: Disabled by ACPI PNP
[   16.448219] PCI: Using ACPI for IRQ routing
[   16.448221] PCI: If a device doesn't work, try "pci=routeirq".  If it helps, 
post a report
[   16.448370] NET: Registered protocol family 8
[   16.448372] NET: Registered protocol family 20
[   16.448415] pnp: 00:05: ioport range 0xc80-0xcaf has been reserved
[   16.448418] pnp: 00:05: ioport range 0xcc0-0xcff could not be reserved
[   16.448425] pnp: 00:08: iomem range 0xfed00000-0xfed003ff could not be 
reserved
[   16.448430] pnp: 00:0a: ioport range 0xcb0-0xcbb has been reserved
[   16.448433] pnp: 00:0a: iomem range 0xfed40000-0xfed44fff could not be 
reserved
[   16.448437] pnp: 00:0b: ioport range 0x900-0x97f has been reserved
[   16.448440] pnp: 00:0b: ioport range 0x4d0-0x4d1 has been reserved
[   16.448442] pnp: 00:0b: ioport range 0x1000-0x1005 has been reserved
[   16.448445] pnp: 00:0b: ioport range 0x1008-0x100f has been reserved
[   16.448450] pnp: 00:0c: ioport range 0xf400-0xf4fe has been reserved
[   16.448452] pnp: 00:0c: ioport range 0x1006-0x1007 has been reserved
[   16.448455] pnp: 00:0c: ioport range 0x100a-0x1059 could not be reserved
[   16.448457] pnp: 00:0c: ioport range 0x1060-0x107f has been reserved
[   16.448460] pnp: 00:0c: ioport range 0x1080-0x10bf has been reserved
[   16.448462] pnp: 00:0c: ioport range 0x10c0-0x10df has been reserved
[   16.448464] pnp: 00:0c: ioport range 0x1010-0x102f has been reserved
[   16.448469] pnp: 00:0d: iomem range 0x0-0x9efff could not be reserved
[   16.448472] pnp: 00:0d: iomem range 0x9f000-0x9ffff could not be reserved
[   16.448474] pnp: 00:0d: iomem range 0xc0000-0xcffff could not be reserved
[   16.448477] pnp: 00:0d: iomem range 0xe0000-0xfffff could not be reserved
[   16.452360] Time: tsc clocksource has been installed.
[   16.478741] PCI: Bridge: 0000:00:1c.0
[   16.478742]   IO window: disabled.
[   16.478747]   MEM window: disabled.
[   16.478751]   PREFETCH window: disabled.
[   16.478756] PCI: Bridge: 0000:00:1c.1
[   16.478757]   IO window: disabled.
[   16.478762]   MEM window: fe800000-fe8fffff
[   16.478766]   PREFETCH window: disabled.
[   16.478771] PCI: Bridge: 0000:00:1c.5
[   16.478772]   IO window: disabled.
[   16.478778]   MEM window: fe700000-fe7fffff
[   16.478782]   PREFETCH window: disabled.
[   16.478792] PCI: Bus 4, cardbus bridge: 0000:03:01.0
[   16.478794]   IO window: 00002000-000020ff
[   16.478799]   IO window: 00002400-000024ff
[   16.478803]   PREFETCH window: 70000000-73ffffff
[   16.478808]   MEM window: 74000000-77ffffff
[   16.478813] PCI: Bridge: 0000:00:1e.0
[   16.478816]   IO window: 2000-2fff
[   16.478821]   MEM window: fe600000-fe6fffff
[   16.478825]   PREFETCH window: 70000000-73ffffff
[   16.478850] ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 16 (level, low) -> 
IRQ 16
[   16.478856] PCI: Setting latency timer of device 0000:00:1c.0 to 64
[   16.478876] ACPI: PCI Interrupt 0000:00:1c.1[B] -> GSI 17 (level, low) -> 
IRQ 17
[   16.478881] PCI: Setting latency timer of device 0000:00:1c.1 to 64
[   16.478900] ACPI: PCI Interrupt 0000:00:1c.5[B] -> GSI 17 (level, low) -> 
IRQ 17
[   16.478905] PCI: Setting latency timer of device 0000:00:1c.5 to 64
[   16.478917] PCI: Setting latency timer of device 0000:00:1e.0 to 64
[   16.478932] PCI: Enabling device 0000:03:01.0 (0000 -> 0003)
[   16.478937] ACPI: PCI Interrupt 0000:03:01.0[A] -> GSI 19 (level, low) -> 
IRQ 18
[   16.478950] NET: Registered protocol family 2
[   16.500429] Switched to high resolution mode on CPU 1
[   16.504332] Switched to high resolution mode on CPU 0
[   16.520329] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[   16.520378] TCP established hash table entries: 131072 (order: 8, 1572864 
bytes)
[   16.520990] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[   16.521212] TCP: Hash tables configured (established 131072 bind 65536)
[   16.521215] TCP reno registered
[   16.536447] checking if image is initramfs... it is
[   17.111059] Freeing initrd memory: 6738k freed
[   17.111553] audit: initializing netlink socket (disabled)
[   17.111567] audit(1183844136.952:1): initialized
[   17.111646] highmem bounce pool size: 64 pages
[   17.113370] VFS: Disk quotas dquot_6.5.1
[   17.113414] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[   17.113493] io scheduler noop registered
[   17.113495] io scheduler anticipatory registered
[   17.113497] io scheduler deadline registered
[   17.113509] io scheduler cfq registered (default)
[   17.113520] Boot video device is 0000:00:02.0
[   17.113714] PCI: Setting latency timer of device 0000:00:1c.0 to 64
[   17.113763] assign_interrupt_mode Found MSI capability
[   17.113804] Allocate Port Service[0000:00:1c.0:pcie00]
[   17.113831] Allocate Port Service[0000:00:1c.0:pcie02]
[   17.113857] Allocate Port Service[0000:00:1c.0:pcie03]
[   17.113942] PCI: Setting latency timer of device 0000:00:1c.1 to 64
[   17.113990] assign_interrupt_mode Found MSI capability
[   17.114027] Allocate Port Service[0000:00:1c.1:pcie00]
[   17.114053] Allocate Port Service[0000:00:1c.1:pcie02]
[   17.114082] Allocate Port Service[0000:00:1c.1:pcie03]
[   17.114165] PCI: Setting latency timer of device 0000:00:1c.5 to 64
[   17.114213] assign_interrupt_mode Found MSI capability
[   17.114251] Allocate Port Service[0000:00:1c.5:pcie00]
[   17.114280] Allocate Port Service[0000:00:1c.5:pcie02]
[   17.114306] Allocate Port Service[0000:00:1c.5:pcie03]
[   17.114474] isapnp: Scanning for PnP cards...
[   17.468288] isapnp: No Plug & Play device found
[   17.486341] Real Time Clock Driver v1.12ac
[   17.486476] hpet_resources: 0xfed00000 is busy
[   17.486541] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing 
enabled
[   17.487096] 00:09: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[   17.487642] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 
blocksize
[   17.487751] input: Macintosh mouse button emulation as /class/input/input0
[   17.487819] PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:PS2M] at 0x60,0x64 irq 
1,12
[   17.491443] serio: i8042 KBD port at 0x60,0x64 irq 1
[   17.491448] serio: i8042 AUX port at 0x60,0x64 irq 12
[   17.491586] mice: PS/2 mouse device common for all mice
[   17.491684] EISA: Probing bus 0 at eisa.0
[   17.491687] EISA: Cannot allocate resource for mainboard
[   17.491689] Cannot allocate resource for EISA slot 1
[   17.491692] Cannot allocate resource for EISA slot 2
[   17.491720] EISA: Detected 0 cards.
[   17.491795] TCP cubic registered
[   17.491807] NET: Registered protocol family 1
[   17.491825] Using IPI No-Shortcut mode
[   17.491983]   Magic number: 15:787:600
[   17.492014]   hash matches device ptyd4
[   17.492242] Freeing unused kernel memory: 364k freed
[   17.494344] input: AT Translated Set 2 keyboard as /class/input/input1
[   18.673857] Capability LSM initialized
[   18.682195] ACPI: SSDT 5F681138, 0244 (r1  PmRef  Cpu0Ist     3000 INTL 
20050624)
[   18.682393] ACPI: SSDT 5F680BFD, 04B6 (r1  PmRef  Cpu0Cst     3001 INTL 
20050624)
[   18.682664] Monitor-Mwait will be used to enter C-1 state
[   18.682667] Monitor-Mwait will be used to enter C-2 state
[   18.682669] Monitor-Mwait will be used to enter C-3 state
[   18.682673] ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
[   18.682678] ACPI: Processor [CPU0] (supports 8 throttling states)
[   18.682888] ACPI: SSDT 5F68137C, 00C4 (r1  PmRef  Cpu1Ist     3000 INTL 
20050624)
[   18.683074] ACPI: SSDT 5F6810B3, 0085 (r1  PmRef  Cpu1Cst     3000 INTL 
20050624)
[   18.683390] ACPI: CPU1 (power states: C1[C1] C2[C2] C3[C3])
[   18.683395] ACPI: Processor [CPU1] (supports 8 throttling states)
[    2.688000] Marking TSC unstable due to: possible TSC halt in C2.
[    2.692000] Time: hpet clocksource has been installed.
[    2.692000] ACPI: Thermal Zone [THM] (52 C)
[    3.204000] usbcore: registered new interface driver usbfs
[    3.204000] usbcore: registered new interface driver hub
[    3.204000] usbcore: registered new device driver usb
[    3.208000] ACPI: PCI Interrupt 0000:00:1a.7[C] -> GSI 22 (level, low) -> 
IRQ 19
[    3.208000] PCI: Setting latency timer of device 0000:00:1a.7 to 64
[    3.208000] ehci_hcd 0000:00:1a.7: EHCI Host Controller
[    3.208000] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus 
number 1
[    3.208000] ehci_hcd 0000:00:1a.7: debug port 1
[    3.208000] PCI: cache line size of 32 is not supported by device 
0000:00:1a.7
[    3.208000] ehci_hcd 0000:00:1a.7: irq 19, io mem 0xfed1c400
[    3.212000] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 
2004
[    3.212000] usb usb1: configuration #1 chosen from 1 choice
[    3.212000] hub 1-0:1.0: USB hub found
[    3.212000] hub 1-0:1.0: 4 ports detected
[    3.220000] USB Universal Host Controller Interface driver v3.0
[    3.228000] SCSI subsystem initialized
[    3.232000] libata version 2.21 loaded.
[    3.804000] Clocksource tsc unstable (delta = -534641256 ns)
[    3.804000] ACPI: PCI Interrupt 0000:00:1a.0[A] -> GSI 20 (level, low) -> 
IRQ 20
[    3.804000] PCI: Setting latency timer of device 0000:00:1a.0 to 64
[    3.804000] uhci_hcd 0000:00:1a.0: UHCI Host Controller
[    3.804000] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus 
number 2
[    3.804000] uhci_hcd 0000:00:1a.0: irq 20, io base 0x00006f20
[    3.804000] usb usb2: configuration #1 chosen from 1 choice
[    3.808000] hub 2-0:1.0: USB hub found
[    3.808000] hub 2-0:1.0: 2 ports detected
[    3.912000] ACPI: PCI Interrupt 0000:03:01.4[A] -> GSI 19 (level, low) -> 
IRQ 18
[    3.960000] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[18]  
MMIO=[fe6ff000-fe6ff7ff]  Max Packet=[2048]  IR/IT contexts=[8/8]
[    3.964000] tg3.c:v3.77 (May 31, 2007)
[    3.964000] ACPI: PCI Interrupt 0000:09:00.0[A] -> GSI 17 (level, low) -> 
IRQ 17
[    3.964000] PCI: Setting latency timer of device 0000:09:00.0 to 64
[    3.980000] eth0: Tigon3 [partno(BCM95755m) rev a002 PHY(5755)] (PCI 
Express) 10/100/1000Base-T Ethernet 00:18:8b:da:c1:e8
[    3.980000] eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] WireSpeed[1] 
TSOcap[1]
[    3.980000] eth0: dma_rwctrl[76180000] dma_mask[64-bit]
[    3.980000] ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 20 (level, low) -> 
IRQ 20
[    3.980000] PCI: Setting latency timer of device 0000:00:1d.7 to 64
[    3.980000] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[    3.984000] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus 
number 3
[    3.984000] ehci_hcd 0000:00:1d.7: debug port 1
[    3.984000] PCI: cache line size of 32 is not supported by device 
0000:00:1d.7
[    3.984000] ehci_hcd 0000:00:1d.7: irq 20, io mem 0xfed1c000
[    3.984000] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 
2004
[    3.988000] usb usb3: configuration #1 chosen from 1 choice
[    3.988000] hub 3-0:1.0: USB hub found
[    3.988000] hub 3-0:1.0: 6 ports detected
[    4.092000] ACPI: PCI Interrupt 0000:00:1a.1[B] -> GSI 21 (level, low) -> 
IRQ 21
[    4.092000] PCI: Setting latency timer of device 0000:00:1a.1 to 64
[    4.092000] uhci_hcd 0000:00:1a.1: UHCI Host Controller
[    4.092000] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus 
number 4
[    4.092000] uhci_hcd 0000:00:1a.1: irq 21, io base 0x00006f00
[    4.092000] usb usb4: configuration #1 chosen from 1 choice
[    4.092000] hub 4-0:1.0: USB hub found
[    4.092000] hub 4-0:1.0: 2 ports detected
[    4.872000] ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 20 (level, low) -> 
IRQ 20
[    4.872000] PCI: Setting latency timer of device 0000:00:1d.0 to 64
[    4.872000] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[    4.872000] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus 
number 5
[    4.872000] uhci_hcd 0000:00:1d.0: irq 20, io base 0x00006f80
[    4.872000] usb usb5: configuration #1 chosen from 1 choice
[    4.872000] hub 5-0:1.0: USB hub found
[    4.872000] hub 5-0:1.0: 2 ports detected
[    4.976000] ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 21 (level, low) -> 
IRQ 21
[    4.976000] PCI: Setting latency timer of device 0000:00:1d.1 to 64
[    4.976000] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[    4.976000] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus 
number 6
[    4.976000] uhci_hcd 0000:00:1d.1: irq 21, io base 0x00006f60
[    4.976000] usb usb6: configuration #1 chosen from 1 choice
[    4.976000] hub 6-0:1.0: USB hub found
[    4.976000] hub 6-0:1.0: 2 ports detected
[    5.084000] ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 22 (level, low) -> 
IRQ 19
[    5.084000] PCI: Setting latency timer of device 0000:00:1d.2 to 64
[    5.084000] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[    5.084000] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus 
number 7
[    5.084000] uhci_hcd 0000:00:1d.2: irq 19, io base 0x00006f40
[    5.084000] usb usb7: configuration #1 chosen from 1 choice
[    5.084000] hub 7-0:1.0: USB hub found
[    5.084000] hub 7-0:1.0: 2 ports detected
[    5.272000] ata_piix 0000:00:1f.2: version 2.11
[    5.272000] ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
[    5.340000] ieee1394: Host added: ID:BUS[0-00:1023]  GUID[314fc0003b75145c]
[    5.476000] ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 17 (level, low) -> 
IRQ 17
[    5.476000] PCI: Setting latency timer of device 0000:00:1f.2 to 64
[    5.476000] scsi0 : ata_piix
[    5.476000] scsi1 : ata_piix
[    5.476000] ata1: SATA max UDMA/133 cmd 0x00016eb0 ctl 0x00016eba bmdma 
0x00016ee0 irq 0
[    5.476000] ata2: SATA max UDMA/133 cmd 0x00016ec0 ctl 0x00016eca bmdma 
0x00016ee8 irq 0
[    5.640000] ata1.00: ata_hpa_resize 1: sectors = 156301488, hpa_sectors = 
156301488
[    5.640000] ata1.00: ATA-7: Hitachi HTS721080G9SA00, MC4OC10H, max UDMA/100
[    5.640000] ata1.00: 156301488 sectors, multi 8: LBA48 NCQ (depth 0/32)
[    5.656000] ata1.00: ata_hpa_resize 1: sectors = 156301488, hpa_sectors = 
156301488
[    5.656000] ata1.00: configured for UDMA/100
[    5.812000] scsi 0:0:0:0: Direct-Access     ATA      Hitachi HTS72108 MC4O 
PQ: 0 ANSI: 5
[    5.816000] sd 0:0:0:0: [sda] 156301488 512-byte hardware sectors (80026 MB)
[    5.816000] sd 0:0:0:0: [sda] Write Protect is off
[    5.816000] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    5.816000] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, 
doesn't support DPO or FUA
[    5.816000] sd 0:0:0:0: [sda] 156301488 512-byte hardware sectors (80026 MB)
[    5.816000] sd 0:0:0:0: [sda] Write Protect is off
[    5.816000] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    5.816000] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, 
doesn't support DPO or FUA
[    5.816000]  sda: sda1 sda2 sda3 sda4 < sda5 >
[    5.860000] sd 0:0:0:0: [sda] Attached SCSI disk
[    5.864000] sd 0:0:0:0: Attached scsi generic sg0 type 0
[    5.960000] usb 5-1: new full speed USB device using uhci_hcd and address 2
[    6.100000] Attempting manual resume
[    6.100000] swsusp: Resume From Partition 8:5
[    6.100000] PM: Checking swsusp image.
[    6.100000] PM: Resume from disk failed.
[    6.140000] kjournald starting.  Commit interval 5 seconds
[    6.140000] EXT3-fs: mounted filesystem with ordered data mode.
[    6.168000] usb 5-1: configuration #1 chosen from 1 choice
[    6.412000] usb 6-1: new low speed USB device using uhci_hcd and address 2
[    6.576000] usb 6-1: configuration #1 chosen from 1 choice
[    6.820000] usb 7-1: new full speed USB device using uhci_hcd and address 2
[    6.972000] usb 7-1: configuration #1 chosen from 1 choice
[    6.972000] hub 7-1:1.0: USB hub found
[    6.976000] hub 7-1:1.0: 4 ports detected
[    7.296000] usb 7-1.2: new full speed USB device using uhci_hcd and address 3
[    7.412000] usb 7-1.2: configuration #1 chosen from 1 choice
[   15.040000] PM: Writing back config space on device 0000:09:00.0 at offset 1 
(was 100506, writing 100106)
[   16.044000] Linux agpgart interface v0.102 (c) Dave Jones
[   16.068000] agpgart: Detected an Intel 965GM Chipset.
[   16.068000] agpgart: Detected 7676K stolen memory.
[   16.080000] agpgart: AGP aperture is 256M @ 0xe0000000
[   16.200000] input: PC Speaker as /class/input/input2
[   16.228000] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[   16.252000] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[   16.304000] Yenta: CardBus bridge found at 0000:03:01.0 [1028:01f9]
[   16.304000] Yenta O2: res at 0x94/0xD4: 00/ea
[   16.304000] Yenta O2: enabling read prefetch/write burst
[   16.432000] Yenta: ISA IRQ mask 0x0cb8, PCI irq 18
[   16.432000] Socket status: 30000006
[   16.432000] Yenta: Raising subordinate bus# of parent bus (#03) from #04 to 
#07
[   16.432000] pcmcia: parent PCI bridge I/O window: 0x2000 - 0x2fff
[   16.432000] cs: IO port probe 0x2000-0x2fff: clean.
[   16.432000] pcmcia: parent PCI bridge Memory window: 0xfe600000 - 0xfe6fffff
[   16.432000] pcmcia: parent PCI bridge Memory window: 0x70000000 - 0x73ffffff
[   16.508000] NET: Registered protocol family 17
[   16.528000] ieee80211_crypt: registered algorithm 'NULL'
[   16.528000] ieee80211: 802.11 data/management/control stack, git-1.1.13
[   16.528000] ieee80211: Copyright (C) 2004-2005 Intel Corporation <[EMAIL 
PROTECTED]>
[   16.560000] Bluetooth: Core ver 2.11
[   16.560000] NET: Registered protocol family 31
[   16.560000] Bluetooth: HCI device and connection manager initialized
[   16.560000] Bluetooth: HCI socket layer initialized
[   16.616000] ipw3945: Intel(R) PRO/Wireless 3945 Network Connection driver 
for Linux, 1.2.1mp
[   16.616000] ipw3945: Copyright(c) 2003-2006 Intel Corporation
[   16.616000] ACPI: PCI Interrupt 0000:0c:00.0[A] -> GSI 17 (level, low) -> 
IRQ 17
[   16.616000] PCI: Setting latency timer of device 0000:0c:00.0 to 64
[   16.616000] ipw3945: Detected Intel PRO/Wireless 3945ABG Network Connection
[   16.632000] Bluetooth: HCI USB driver ver 2.9
[   16.688000] tg3: eth0: Link is up at 100 Mbps, full duplex.
[   16.688000] tg3: eth0: Flow control is on for TX and on for RX.
[   16.732000] input: PS/2 Mouse as /class/input/input3
[   16.740000] usbcore: registered new interface driver hci_usb
[   16.740000] usbcore: registered new interface driver hiddev
[   16.752000] input: AlpsPS/2 ALPS GlidePoint as /class/input/input4
[   16.848000] input: USB Mouse as /class/input/input5
[   16.848000] input: USB HID v1.00 Mouse [USB Mouse] on usb-0000:00:1d.1-1
[   16.848000] usbcore: registered new interface driver usbhid
[   16.848000] 
/build/buildd/linux-source-2.6.22-2.6.22/drivers/hid/usbhid/hid-core.c: 
v2.6:USB HID core driver
[   17.100000] ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 21 (level, low) -> 
IRQ 21
[   17.100000] PCI: Setting latency timer of device 0000:00:1b.0 to 64
[   17.144000] cs: IO port probe 0x100-0x3af: clean.
[   17.144000] cs: IO port probe 0x3e0-0x4ff: clean.
[   17.144000] cs: IO port probe 0x820-0x8ff: clean.
[   17.144000] cs: IO port probe 0xc00-0xcf7: clean.
[   17.148000] cs: IO port probe 0xa00-0xaff: clean.
[   18.324000] ALSA 
/usr/src/alsa/alsa-driver-1.0.14rc4/pci/hda/../../alsa-kernel/pci/hda/hda_intel.c:558:
 hda_intel: azx_get_response timeout, switching to polling mode...
[   18.528000] ipw3945: Radio Frequency Kill Switch is On:
[   18.528000] Kill switch must be turned off for wireless networking to work.
[   19.328000] ALSA 
/usr/src/alsa/alsa-driver-1.0.14rc4/pci/hda/../../alsa-kernel/pci/hda/hda_intel.c:564:
 hda_intel: azx_get_response timeout, switching to single_cmd mode...
[   26.448000] ALSA 
/usr/src/alsa/alsa-driver-1.0.14rc4/pci/hda/../../alsa-kernel/pci/hda/hda_intel.c:1020:
 hda-intel: no codecs initialized
[   26.448000] ACPI: PCI interrupt for device 0000:00:1b.0 disabled
[   26.592000] lp: driver loaded but no devices found
[   26.644000] fuse init (API version 7.8)
[   26.696000] Adding 2698880k swap on 
/dev/disk/by-uuid/78e4f009-d0cd-4da4-a52d-50d099d6a7c0.  Priority:-1 extents:1 
across:2698880k
[   26.820000] EXT3 FS on sda3, internal journal
[   27.052000] NET: Registered protocol family 10
[   27.052000] lo: Disabled Privacy Extensions
[   28.088000] ACPI: Battery Slot [BAT0] (battery present)
[   28.088000] ACPI: Battery Slot [BAT1] (battery absent)
[   28.096000] ACPI: AC Adapter [AC] (on-line)
[   28.104000] ACPI: ACPI Dock Station Driver 
[   28.136000] input: Lid Switch as /class/input/input6
[   28.136000] ACPI: Lid Switch [LID]
[   28.136000] input: Power Button (CM) as /class/input/input7
[   28.136000] ACPI: Power Button (CM) [PBTN]
[   28.136000] input: Sleep Button (CM) as /class/input/input8
[   28.136000] ACPI: Sleep Button (CM) [SBTN]
[   28.172000] toshiba_acpi: Unknown parameter `hotkeys_over_acpi'
[   28.192000] ACPI: Video Device [VID] (multi-head: yes  rom: no  post: no)
[   28.192000] ACPI: Video Device [VID] (multi-head: yes  rom: no  post: no)
[   28.192000] ACPI: Video Device [VID2] (multi-head: yes  rom: no  post: no)
[   28.200000] ACPI: \_SB_.PCI0.IDE0.SEC0.MAST: found ejectable bay
[   28.200000] ACPI: \_SB_.PCI0.IDE0.SEC0.MAST: Adding notify handler
[   28.200000] ACPI: Bay [\_SB_.PCI0.IDE0.SEC0.MAST] Added
[   28.200000] ACPI: \_SB_.PCI0.IDE1.PRI_.MAST: found ejectable bay
[   28.200000] ACPI: \_SB_.PCI0.IDE1.PRI_.MAST: Adding notify handler
[   28.200000] ACPI: Bay [\_SB_.PCI0.IDE1.PRI_.MAST] Added
[   33.200000] apm: BIOS not found.
[   34.224000] [drm] Initialized drm 1.1.0 20060810
[   34.248000] ACPI: PCI Interrupt 0000:00:02.0[A] -> GSI 16 (level, low) -> 
IRQ 16
[   34.248000] [drm] Initialized i915 1.6.0 20060119 on minor 0
[   34.788000] Bluetooth: L2CAP ver 2.8
[   34.788000] Bluetooth: L2CAP socket layer initialized
[   35.072000] Bluetooth: RFCOMM socket layer initialized
[   35.072000] Bluetooth: RFCOMM TTY layer initialized
[   35.072000] Bluetooth: RFCOMM ver 1.8
[  120.116000] PM: Writing back config space on device 0000:09:00.0 at offset 1 
(was 100506, writing 100106)
[  120.196000] PM: Writing back config space on device 0000:09:00.0 at offset 1 
(was 100506, writing 100106)
[  120.256000] ADDRCONF(NETDEV_UP): eth0: link is not ready
[  121.812000] tg3: eth0: Link is up at 100 Mbps, full duplex.
[  121.812000] tg3: eth0: Flow control is on for TX and on for RX.
[  121.816000] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[  137.020000] eth0: no IPv6 routers present
[ 1216.448000] usb 5-1: USB disconnect, address 2

 cat /proc/interrupts
           CPU0       CPU1       
  0:     527371     526935   IO-APIC-edge      timer
  1:       3077       3018   IO-APIC-edge      i8042
  8:          1          4   IO-APIC-edge      rtc
  9:          8          8   IO-APIC-fasteoi   acpi
 12:         75         76   IO-APIC-edge      i8042
 16:     202577     204054   IO-APIC-fasteoi   [EMAIL PROTECTED]:0000:00:02.0
 17:      12887      12886   IO-APIC-fasteoi   libata, ipw3945
 18:          5          4   IO-APIC-fasteoi   ohci1394, yenta
 19:         60         62   IO-APIC-fasteoi   ehci_hcd:usb1, uhci_hcd:usb7
 20:      59172      59174   IO-APIC-fasteoi   uhci_hcd:usb2, ehci_hcd:usb3, 
uhci_hcd:usb5
 21:      58821      58525   IO-APIC-fasteoi   uhci_hcd:usb4, uhci_hcd:usb6
220:      17783      17634   PCI-MSI-edge      eth0
NMI:          0          0 
LOC:     461967     501135 
ERR:          0
MIS:          0

** Affects: Ubuntu
     Importance: Undecided
         Status: New

-- 
No sound card in Gutsy with D630
https://bugs.launchpad.net/bugs/124590
You received this bug notification because you are a member of Ubuntu
Bugs, which is the bug contact for Ubuntu.

-- 
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs

Reply via email to