** Tags removed: bugpattern-needed ** Description changed:
1) lsb_release -rd Description: Ubuntu 12.10 Release: 12.10 2) apt-cache policy usb-creator-gtk usb-creator-gtk: - Installed: 0.2.40ubuntu1 - Candidate: 0.2.40ubuntu1 - Version table: - *** 0.2.40ubuntu1 0 - 500 http://archive.ubuntu.com/ubuntu/ quantal/main i386 Packages - 100 /var/lib/dpkg/status + Installed: 0.2.40ubuntu1 + Candidate: 0.2.40ubuntu1 + Version table: + *** 0.2.40ubuntu1 0 + 500 http://archive.ubuntu.com/ubuntu/ quantal/main i386 Packages + 100 /var/lib/dpkg/status 3) What is expected to happen via USB disk formatted FAT32 by gparted, is when one types at a terminal: usb-creator-gtk Under Source disk image (.iso) or CD: xubuntu-12.04.1-alternate-i386.iso Under Disk to use: SanDisk Cruzer Blade (/dev/sdb1) - click button Make Startup Disk and it does so successfully. + click radio button Discard on shutdown, unless you save them elsewhere + -> click button Make Startup Disk and it does so successfully. 4) What happens instead is after a while, a window pops up requesting one to type in their credentials. Once complete, it immediately crashes. This happens consistently and prevents one from creating a startup disk successfully. Successfully installed this iso by formatting drive in Windows 7, and creating bootable USB disk via unetbootin in Windows 7, hence hardware is not faulty. sudo lsusb -v [CUT] Bus 002 Device 005: ID 0781:5567 SanDisk Corp. Cruzer Blade Device Descriptor: - bLength 18 - bDescriptorType 1 - bcdUSB 2.00 - bDeviceClass 0 (Defined at Interface level) - bDeviceSubClass 0 - bDeviceProtocol 0 - bMaxPacketSize0 64 - idVendor 0x0781 SanDisk Corp. - idProduct 0x5567 Cruzer Blade - bcdDevice 1.00 - iManufacturer 1 SanDisk - iProduct 2 Cruzer Blade - iSerial 3 2005355082076CB031B6 - bNumConfigurations 1 - Configuration Descriptor: - bLength 9 - bDescriptorType 2 - wTotalLength 32 - bNumInterfaces 1 - bConfigurationValue 1 - iConfiguration 0 - bmAttributes 0x80 - (Bus Powered) - MaxPower 200mA - Interface Descriptor: - bLength 9 - bDescriptorType 4 - bInterfaceNumber 0 - bAlternateSetting 0 - bNumEndpoints 2 - bInterfaceClass 8 Mass Storage - bInterfaceSubClass 6 SCSI - bInterfaceProtocol 80 Bulk-Only - iInterface 0 - Endpoint Descriptor: - bLength 7 - bDescriptorType 5 - bEndpointAddress 0x81 EP 1 IN - bmAttributes 2 - Transfer Type Bulk - Synch Type None - Usage Type Data - wMaxPacketSize 0x0200 1x 512 bytes - bInterval 0 - Endpoint Descriptor: - bLength 7 - bDescriptorType 5 - bEndpointAddress 0x02 EP 2 OUT - bmAttributes 2 - Transfer Type Bulk - Synch Type None - Usage Type Data - wMaxPacketSize 0x0200 1x 512 bytes - bInterval 1 + bLength 18 + bDescriptorType 1 + bcdUSB 2.00 + bDeviceClass 0 (Defined at Interface level) + bDeviceSubClass 0 + bDeviceProtocol 0 + bMaxPacketSize0 64 + idVendor 0x0781 SanDisk Corp. + idProduct 0x5567 Cruzer Blade + bcdDevice 1.00 + iManufacturer 1 SanDisk + iProduct 2 Cruzer Blade + iSerial 3 2005355082076CB031B6 + bNumConfigurations 1 + Configuration Descriptor: + bLength 9 + bDescriptorType 2 + wTotalLength 32 + bNumInterfaces 1 + bConfigurationValue 1 + iConfiguration 0 + bmAttributes 0x80 + (Bus Powered) + MaxPower 200mA + Interface Descriptor: + bLength 9 + bDescriptorType 4 + bInterfaceNumber 0 + bAlternateSetting 0 + bNumEndpoints 2 + bInterfaceClass 8 Mass Storage + bInterfaceSubClass 6 SCSI + bInterfaceProtocol 80 Bulk-Only + iInterface 0 + Endpoint Descriptor: + bLength 7 + bDescriptorType 5 + bEndpointAddress 0x81 EP 1 IN + bmAttributes 2 + Transfer Type Bulk + Synch Type None + Usage Type Data + wMaxPacketSize 0x0200 1x 512 bytes + bInterval 0 + Endpoint Descriptor: + bLength 7 + bDescriptorType 5 + bEndpointAddress 0x02 EP 2 OUT + bmAttributes 2 + Transfer Type Bulk + Synch Type None + Usage Type Data + wMaxPacketSize 0x0200 1x 512 bytes + bInterval 1 Device Qualifier (for other device speed): - bLength 10 - bDescriptorType 6 - bcdUSB 2.00 - bDeviceClass 0 (Defined at Interface level) - bDeviceSubClass 0 - bDeviceProtocol 0 - bMaxPacketSize0 64 - bNumConfigurations 1 + bLength 10 + bDescriptorType 6 + bcdUSB 2.00 + bDeviceClass 0 (Defined at Interface level) + bDeviceSubClass 0 + bDeviceProtocol 0 + bMaxPacketSize0 64 + bNumConfigurations 1 Device Status: 0x0000 - (Bus Powered) + (Bus Powered) ProblemType: Crash DistroRelease: Ubuntu 12.04 Package: usb-creator-gtk 0.2.35.1 ProcVersionSignature: Ubuntu 3.2.0-8.15-generic 3.2.0 Uname: Linux 3.2.0-8-generic x86_64 ApportVersion: 1.90-0ubuntu1 Architecture: amd64 Date: Thu Jan 12 12:05:13 2012 ExecutablePath: /usr/bin/usb-creator-gtk InstallationMedia: Xubuntu 12.04 "Precise Pangolin" - Alpha amd64 (20120109) InterpreterPath: /usr/bin/python2.7 ProcCmdline: /usr/bin/python /usr/bin/usb-creator-gtk ProcEnviron: PATH=(custom, no user) LANG=en_US.UTF-8 SHELL=/bin/bash SegvAnalysis: Segfault happened at: 0x7f4b135fe6c0: movl $0xffffffff,0x4(%rdi) PC (0x7f4b135fe6c0) ok source "$0xffffffff" ok destination "0x4(%rdi)" (0x00000004) not located in a known VMA region (needed writable region)! SegvReason: writing NULL VMA Signal: 11 SourcePackage: usb-creator StacktraceTop: ?? () from /lib/x86_64-linux-gnu/libdbus-1.so.3 ?? () from /lib/x86_64-linux-gnu/libdbus-1.so.3 ?? () from /lib/x86_64-linux-gnu/libdbus-1.so.3 ?? () from /lib/x86_64-linux-gnu/libdbus-1.so.3 ?? () from /lib/x86_64-linux-gnu/libdbus-1.so.3 Title: usb-creator-gtk crashed with SIGSEGV UpgradeStatus: No upgrade log present (probably fresh install) UserGroups: -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/915626 Title: usb-creator-gtk crashed with SIGSEGV To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/udisks/+bug/915626/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
