no need to specify any model if it is a desktop with 5 audion jacks at
read panel
post the pulseaudio log, you need to find out why the priority of spdif
port change to zero
Node 0x10 [Audio Output] wcaps 0x611: Stereo Digital
Control: name="IEC958 Playback Con Mask", index=0, device=0
Control: name="IEC958 Playback Pro Mask", index=0, device=0
Control: name="IEC958 Playback Default", index=0, device=0
Control: name="IEC958 Playback Switch", index=0, device=0
Control: name="IEC958 Default PCM Playback Switch", index=0, device=0
Device: name="ALC888 Digital", type="SPDIF", device=1
Converter: stream=8, channel=0
Digital:
Digital category: 0x0
PCM:
rates [0x5e0]: 44100 48000 88200 96000 192000
bits [0xe]: 16 20 24
formats [0x1]: PCM
Power states: D0 D1 D2 D3 EPSS
Power: setting=D0, actual=D0
Node 0x11 [Pin Complex] wcaps 0x400780: Mono Digital
Control: name="SPDIF Phantom Jack", index=0, device=0
Pincap 0x00000014: OUT Detect
Pin Default 0x01451140: [Jack] SPDIF Out at Ext Rear
Conn = Optical, Color = Black
DefAssociation = 0x4, Sequence = 0x0
Misc = NO_PRESENCE
Pin-ctls: 0x40: OUT
Unsolicited: tag=00, enabled=0
Power states: D0 D1 D2 D3 EPSS
Power: setting=D0, actual=D0
Connection: 1
0x10
profiles:
output:analog-stereo: Analogue Stereo Output (priority 6000)
output:analog-stereo+input:analog-stereo: Analogue Stereo
Duplex (priority 6060)
output:analog-surround-40: Analogue Surround 4.0 Output
(priority 700)
output:analog-surround-40+input:analog-stereo: Analogue
Surround 4.0 Output + Analogue Stereo Input (priority 760)
output:analog-surround-41: Analogue Surround 4.1 Output
(priority 800)
output:analog-surround-41+input:analog-stereo: Analogue
Surround 4.1 Output + Analogue Stereo Input (priority 860)
output:analog-surround-50: Analogue Surround 5.0 Output
(priority 700)
output:analog-surround-50+input:analog-stereo: Analogue
Surround 5.0 Output + Analogue Stereo Input (priority 760)
output:analog-surround-51: Analogue Surround 5.1 Output
(priority 800)
output:analog-surround-51+input:analog-stereo: Analogue
Surround 5.1 Output + Analogue Stereo Input (priority 860)
output:iec958-stereo: Digital Stereo (IEC958) Output (priority
5500)
output:iec958-stereo+input:analog-stereo: Digital Stereo
(IEC958) Output + Analogue Stereo Input (priority 5560)
input:analog-stereo: Analogue Stereo Input (priority 60)
off: Off (priority 0)
active profile: <output:analog-stereo>
sinks:
alsa_output.pci-0000_00_09.0.analog-stereo/#3: Built-in Audio
Analogue Stereo
sources:
alsa_output.pci-0000_00_09.0.analog-stereo.monitor/#4: Monitor
of Built-in Audio Analogue Stereo
ports:
analog-output: Analogue Output (priority 9900, available:
unknown)
properties:
analog-output-headphones: Headphones (priority 9000, available:
no)
properties:
analog-input-microphone-front: Front Microphone (priority 8500,
available: yes)
properties:
analog-input-microphone-rear: Rear Microphone (priority 8200,
available: no)
properties:
analog-input-linein: Line In (priority 8100, available: no)
properties:
iec958-stereo-output: Digital Output (S/PDIF) (priority 0,
available: unknown)
properties:
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1104042
Title:
[Aspire X1800, Realtek ALC888, Black Digital Out, HDMI] No sound at
all
To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/alsa-driver/+bug/1104042/+subscriptions
--
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
