** Description changed:

- The SD card slot does not work until I remove and reload the tg3 module.
- 
- I tested this with Ubuntu 12.04 32bit and 13.04 32bit. Both are affected
- in the same way.
- 
- Steps to reproduce:
- 
- 1) Insert an SD card
- 2) dmesg says repeatedly: mmc0: Timeout waiting for hardware interrupt
- 3) rmmod tg3 -> nothing happens with the SD card
- 4) modprobe tg3 -> Gnome provides to open the media in file manager, which 
works fine now.
- 5) rmmod tg3 ->Cardreader is still functional
- 
- The type of SD card does not matter and it does not matter if an
- ethernet cable is plugged.
- 
- dmesg output:
- 
- insert card:
+ My SD Card reader will not work without reloading the tg3 module. When I 
insert an SD card, dmesg output:
  [ 409.712345] mmc0: Timeout waiting for hardware interrupt.
  [ 419.722227] mmc0: Timeout waiting for hardware interrupt.
  [ 429.732104] mmc0: Timeout waiting for hardware interrupt.
  [ 439.742025] mmc0: Timeout waiting for hardware interrupt.
  [ 443.841471] mmc0: Card removed during transfer!
  [ 443.841477] mmc0: Resetting controller.
+ 
+ The type of SD card does not matter and it does not matter if an
+ ethernet cable is plugged. I tested this with Ubuntu 12.04 32bit and
+ 13.04 32bit. Both are affected in the same way.
+ 
+ WORKAROUND: Perform at a terminal:
+ rmmod tg3
+ modprobe tg3
  
  rmmod tg3:
  [ 447.384229] tg3 0000:04:00.0: PME# enabled
  [ 447.384258] tg3 0000:04:00.0: wake-up capability enabled by ACPI
  [ 447.417401] tg3 0000:04:00.0: PCI INT A disabled
  
  modprobe tg3:
  [ 475.816235] tg3.c:v3.121 (November 2, 2011)
  [ 475.819526] mmc0: new high speed SDHC card at address 0007
  [ 475.832068] tg3 0000:04:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
  [ 475.832129] tg3 0000:04:00.0: setting latency timer to 64
  [ 475.839493] mmcblk0: mmc0:0007 SD08G 7.48 GiB
  [ 475.841628] mmcblk0: p1
  [ 475.880672] tg3 0000:04:00.0: eth0: Tigon3 [partno(BCM57785) rev 57785100] 
(PCI Express) MAC address b8:88:e3:42:5d:df
  [ 475.880680] tg3 0000:04:00.0: eth0: attached PHY is 57765 
(10/100/1000Base-T Ethernet) (WireSpeed[1], EEE[1])
  [ 475.880685] tg3 0000:04:00.0: eth0: RXcsums[1] LinkChgREG[0] MIirq[0] 
ASF[0] TSOcap[1]
  [ 475.880690] tg3 0000:04:00.0: eth0: dma_rwctrl[00000001] dma_mask[64-bit]
  [ 475.908963] udevd[2073]: renamed network interface eth0 to eth1
  [ 475.916412] tg3 0000:04:00.0: irq 44 for MSI/MSI-X
  [ 475.916426] tg3 0000:04:00.0: irq 45 for MSI/MSI-X
  [ 475.916437] tg3 0000:04:00.0: irq 46 for MSI/MSI-X
  [ 476.486620] ADDRCONF(NETDEV_UP): eth1: link is not ready
  [ 476.487582] ADDRCONF(NETDEV_UP): eth1: link is not ready
  
  ProblemType: Bug
  DistroRelease: Ubuntu 12.04
  Package: linux-image-3.2.0-41-generic-pae 3.2.0-41.66
  ProcVersionSignature: Ubuntu 3.2.0-41.66-generic-pae 3.2.42
  Uname: Linux 3.2.0-41-generic-pae i686
  AlsaVersion: Advanced Linux Sound Architecture Driver Version 1.0.24.
  ApportVersion: 2.0.1-0ubuntu17.2
  Architecture: i386
  ArecordDevices:
-  **** List of CAPTURE Hardware Devices ****
-  card 0: PCH [HDA Intel PCH], device 0: ALC271X Analog [ALC271X Analog]
-    Subdevices: 1/1
-    Subdevice #0: subdevice #0
+  **** List of CAPTURE Hardware Devices ****
+  card 0: PCH [HDA Intel PCH], device 0: ALC271X Analog [ALC271X Analog]
+    Subdevices: 1/1
+    Subdevice #0: subdevice #0
  AudioDevicesInUse:
-  USER        PID ACCESS COMMAND
-  /dev/snd/controlC0:  stefan     2100 F.... pulseaudio
+  USER        PID ACCESS COMMAND
+  /dev/snd/controlC0:  stefan     2100 F.... pulseaudio
  Card0.Amixer.info:
-  Card hw:0 'PCH'/'HDA Intel PCH at 0xc0600000 irq 43'
-    Mixer name : 'Intel PantherPoint HDMI'
-    Components : 'HDA:10ec0269,10250742,00100100 
HDA:80862806,80860101,00100000'
-    Controls      : 23
-    Simple ctrls  : 11
+  Card hw:0 'PCH'/'HDA Intel PCH at 0xc0600000 irq 43'
+    Mixer name : 'Intel PantherPoint HDMI'
+    Components : 'HDA:10ec0269,10250742,00100100 
HDA:80862806,80860101,00100000'
+    Controls      : 23
+    Simple ctrls  : 11
  Date: Thu May  9 09:42:43 2013
  Lsusb:
-  Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
-  Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
-  Bus 001 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub
-  Bus 002 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub
-  Bus 001 Device 003: ID 064e:d251 Suyin Corp.
+  Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
+  Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
+  Bus 001 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub
+  Bus 002 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub
+  Bus 001 Device 003: ID 064e:d251 Suyin Corp.
  MachineType: Acer AO756
  MarkForUpload: True
  ProcEnviron:
-  LANGUAGE=de_DE:en
-  TERM=xterm
-  PATH=(custom, no user)
-  LANG=de_DE.UTF-8
-  SHELL=/bin/bash
+  LANGUAGE=de_DE:en
+  TERM=xterm
+  PATH=(custom, no user)
+  LANG=de_DE.UTF-8
+  SHELL=/bin/bash
  ProcFB: 0 inteldrmfb
  ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.2.0-41-generic-pae 
root=UUID=e1e0405e-1b4d-4f0d-89f8-9324d70236c9 ro quiet splash 
acpi_backlight=vendor vt.handoff=7
  RelatedPackageVersions:
-  linux-restricted-modules-3.2.0-41-generic-pae N/A
-  linux-backports-modules-3.2.0-41-generic-pae  N/A
-  linux-firmware                                1.79.4
+  linux-restricted-modules-3.2.0-41-generic-pae N/A
+  linux-backports-modules-3.2.0-41-generic-pae  N/A
+  linux-firmware                                1.79.4
  SourcePackage: linux
  StagingDrivers: mei
  UpgradeStatus: No upgrade log present (probably fresh install)
  dmi.bios.date: 04/26/2012
  dmi.bios.vendor: Acer
  dmi.bios.version: V1.02
  dmi.board.asset.tag: Type2 - Board Asset Tag
  dmi.board.name: Mimic
  dmi.board.vendor: Acer
  dmi.board.version: Type2 - Board Version
  dmi.chassis.type: 10
  dmi.chassis.vendor: Acer
  dmi.chassis.version: V1.02
  dmi.modalias: 
dmi:bvnAcer:bvrV1.02:bd04/26/2012:svnAcer:pnAO756:pvrV1.02:rvnAcer:rnMimic:rvrType2-BoardVersion:cvnAcer:ct10:cvrV1.02:
  dmi.product.name: AO756
  dmi.product.version: V1.02
  dmi.sys.vendor: Acer

** Tags added: bios-outdated-1.09 kernel-media needs-upstream-testing
raring

** Summary changed:

- SD card slot not working on Acer Aspire One 756
+ 14e4:16bc SD card slot not working on Acer Aspire One 756

-- 
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1178131

Title:
  14e4:16bc SD card slot not working on Acer Aspire One 756

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1178131/+subscriptions

-- 
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs

Reply via email to